1999 Chevrolet K2500 Differentials

Product Features:

• GM10.5″ 14 BOLT OPEN EMPTY CASE 4:56 & UP

aFe Power’s new rear differential cover brings performance engineering to the protection of your axle’s differential. This differential cover is constructed out of durable A356-T6 cast aluminum with reinforcing ribs for maximum strength. Mounting hardware is included for a hassle-free installation. An oil level sight glass and calibration plug set to the factory level prevents overfilling of the differential. A magnetic drain plug and a deep reach magnetic fill plug are provided for maximum protection. This cover is finished in black powder-coating with machined fins for a distinctive look. 4 Quart Gear Oil Capacity: This cover has about a 4 quart gear oil capacity at the factory fill level, factory cover holds about 3 quarts. Built-in External Fins: Built-in external fins transfer heat from the fluid to the outside air for maximum cooling. Magnetic Drain/Fill Plug: This system incorporates a magnetic drain and deep reach fill plug that captures loose particles for maximum rear-end protection. Oil Level Sight Glass: Large oil level sight glass with 1/8” NPT calibration plug set to the factory fluid level to eliminate overfilling. When it comes to engineering for power, performance, protection and value, aFe Power is the only choice.

Product Features:

• Constructed of Durable A356 Die Cast Aluminum
• Reinforcing Ribs and Black Powder coating w/Machined Fins
• Magnetic Drain and Fill Plugs Capture Loose Particles
• Large Oil Level Sight Glass w/ Calibration Plug

O-ring for left hand carrier bearing adjuster for 9.25″ GM IFS.

Product Features:

• Axle o-ring
• Fits Chrysler 9.25″ IFS

Differential Bearing

Differential Drain P

Ring gear bolt for GM 7.5″, 7.6″, 7.6″ IRS, 8.0″, 8.25″ IFS, 8.5″, 8.6″ & 8.6″ IRS. 7/16″ x 20.

Product Features:

• Ring gear bolt for GM 7.5″, 7.625″, 7.6″ IRS, 8.0″, 8.25″ IFS, 8.5″, 8.6″ and 8.6″ IRS
• 7/16″ x 20

Pinion nut washer for GM 7.2″ IFS, 7.5″, 7.6″, 7.6″ IFS, 8.5″, 8.6″ & 9.5″.

Product Features:

• Pinion nut washer for GM 7.2″ IFS, 7.5″, 7.625″, 7.6″ IFS, 8.5″, 8.6″ and 9.5″.

The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

Product Features:

• Fits GM 9.5″
• 4-spring, clutch style positraction
• Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
• Fully rebuildable
• Assembled in the USA

PINION SEAL

This kit uses Koyo bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. USA Standard Gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:

• Fits 2010 and down GM 9.25″ IFS
• Uses Koyo bearings and races
• Included are carrier bearings and races, pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking compound and brush.

Value-priced bearing meets all cataloged application requirements.

Product Features:

• Brand may vary by location

Product Features:

• MINI INSTALL KIT-GM9.5/CHRY9.25 FRT

Spartan spring & pin kit, fits smaller designs.

Product Features:

• Replacement spring and pin kit for Spartan Locker
• Fits Dana 30, Dana 44, AMC Model 20, AMC Model 35, and Toyota designs
• Includes 4 springs and 4 alignment pins

USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

Product Features:

• Fits GM 9.5″
• 9.50″ ring gear diameter
• 30 spline pinion
• 12 ring gear bolts
• 4.56 ratio

Eaton positraction shim kit for 9.5″ GM.

Product Features:

• Shim kit
• Fits GM 9.5″ Eaton positraction

Standard Open cross pin shaft for four pinion design for GM 14T.

Product Features:

• Cross pin shaft
• Fits GM 10.5″ 14 bolt truck

This differential pinion shaft lock bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this differential pinion shaft lock bolt matches the fit and function of the factory part on specified years, makes and models
• Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Differential Cover B

Bearing race driver. No return.

Product Features:

• Bearing race driver
• Fits HM88610 race
• All steel construction

Product Features:

• Brand may vary by location

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

• Fits 1988 and down GM 10.5″ 14 bolt truck
• Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.

Yukon pinion yoke for ’10 & up GM 14 bolt truck, Express van only.

Product Features:

• Fits GM 10.5″ 14 bolt truck in Express van
• 30 spline
• 1485 U-Joint size

Yukon 1480 Lifetime Series U/Joint. 4.188″ snap ring span, 1.375″ cap diameter. Outside snap ring.

Product Features:

• Clutch kit
• Fits GM 10.5″ 14 bolt truck with Eaton positraction
• Carbon fiber clutches

8.75-42, 8.75-89, 9.25″ Chrysler & GM, 9.5″, 10.25″ pinion shim kit.

Product Features:

• Pinion depth shim kit for Chrysler 8.75″ with ’42’ or ’89’ case housing, Chrysler 9.25″, GM 9.5″ and Ford 10.25″

14T pinion gear Thrust washer.

Product Features:

• Pinion gear thrust washer
• Fits GM 10.5″ 14 bolt truck

9.25″ IFS & 9.5″ case standard Open, loeaded.

Product Features:

• Standard open carrier case and spiders
• Fits GM 9.25″ IFS and 9.5″

9.5″ GM differential carrier Supershim kit.

Product Features:

• Super carrier shim kit for GM 9.5″
• Interlocking design makes installation much easier

Eaton-type 14 plate Carbon clutch set for 9.5″ GM and 9.75″ Ford.

Product Features:

• Clutch kit
• Fits GM 9.5″ with Eaton positraction
• Carbon fiber clutches