1999 Chevrolet Cavalier Engine Parts

Below you will find various in-demand Chevrolet Engine Parts, components and accessories for your 1999 Cavalier. Advance Auto Parts has popular Cavalier parts like Engine Gaskets and Seals, Engine Mounts, Camshafts and more. You’ll also find aftermarket and OEM Engine Parts for other Cavalier model years including 1996, 1997, 1998, 2000, 2001, 2002, 2003, 2004, 2005 and more. Select a category of 1999 Chevrolet Cavalier Engine Parts below and start saving instantly.

Popular 1999 Chevrolet Cavalier Engine Parts Categories

Engine Valve Lifters

Valve Cover Gaskets

Engine Timing Chain Kits

Engine Mount and Torque Struts

Oil Pumps

Oil Pan Gaskets

Camshaft Position Sensors

OE Engine Oil Coolers

Rear Main Seal Sets

Cylinder Head Bolt Sets

Crankshaft Position Sensors

Balance Shaft Chain and Kits

Engine Crankshaft Kits

Harmonic Balancers

Timing Cover Gasket Sets

Cylinder Head Gasket Sets

Timing Cam Gears

Engine Mounts

Oil Pans

Cylinder Head Gaskets

Camshaft Position Sensor Connectors

Timing Chain Tensioners

Engine Oil Pump Pickup Tube and Screens

Rubber Freeze Plugs

O-Rings

Timing Cover Repair Sleeves

Oil Pump Shafts

Timing Cover Seals

Engine Valve Stem Seals

Oversized Main Bearings

Camshaft Bearings

Push Rods

Standard Rod Bearing Sets

Standard Piston Rings

Timing Chains

Engine Torque Dampers

Camshaft Seals

Timing Chain Guides

Standard Individual Rod Bearings

Oil Pump Nylon Shaft Guides

Timing Crank Gears

Expansion Plugs

Balance Shaft Chain Guides

Engine Valve Locks

Remanufactured Engines

Engine Oil Pump Primers

Essential Engine Parts for 1999 Chevrolet Cavaliers

from

$49.99

A timing chain synchronizes the rotation of the crankshaft and camshaft(s) ensuring proper timing and allows the engine’s valves to open and close during each cylinder’s firing. Available in kits or as a stand-alone product, our chains are pre-stressed and heat-treated for increased durability. Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment

Product Features:

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

from

$184.99

Product Features:

Size: 3/4 in. x 10 in. x 12-1/4 in.
Medium duty applications
All except Chevrolet V8 applications
Two-pass design for increased cooling

from

$174.99

Designed for the replacement of worn or damaged timing chains, tensioners, and guides, Timing Chain Kits includes all components for a quick and efficient replacement. Each part is CAD designed and manufactured using premium materials. Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing.

Product Features:

Meet or exceed OEM performance requirements, ensuring a quiet and maintenance free experience
Utilizes the latest in design and technology to offer a complete chain kit solution
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance

from

$33.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$6.99

Made In USA. 4 OZ Melling engine assembly lube, MELL-LUBE, is formulated to be an initial lubricant on camshaft metal surfaces as well as related valve train parts. The added zinc material (1400 ppm) provides MELL-LUBE with added protection to prevent scoring and galling during initial engine start-up for both newly rebuilt and / or remanufactured engines. In addition, MELL-LUBE contains corrosion inhibitors to prevent rust and pitting of components. MELL-LUBE mixes with any engine oil and will not clog filters. Melling recommends MELL-LUBE be a part of every camshaft install.

from

$16.79

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$19.99

A timing chain guide serves as a track or guide, for the timing chain, connecting the crankshaft and camshaft. Designed to meet or exceed OEM performance requirements, Timing Guides, which are available in kits or as a stand-alone product, utilize the latest in design and material technology, ensuring quiet and maintenance-free experience

Product Features:

Extensively tested and measured for function, fitment, and durability to ensure optimal performance
CAD designed and manufactured using premium materials
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
Refer to our online catalog for detailed application-specific information

from

$1.29

This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$5.49

Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.

Product Features:

Provides proper seal to ensure leak prevention
Stops engine blow by
High quality construction
Meets all OEM specifications

from

$355.99

Engine Oil Priming Tool

from

$60.99

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Cast with FM425 AXP for strength and durability
Performance/dependability of OE pistons – high quality aluminum casting & machining provide reliability, durability & long life of part
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications
Up-tilt ring grooves improve piston to ring sealing & providing great blow-by control

from

$373.99

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

A-Series bi-metal aluminum alloy
Greater seizure resistance than tri-metal material
Reduces dramatically or eliminates bearing wear
Exacting tolerances
Made with silicon to provide greater surface hardness

from

$31.49

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The Torque Strut prevents engine rocking. Each part is engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to CHEV 95-05; PONT 95-05;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1995-2005
Weight approx: 2 Lbs

from

$21.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$20.79

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$23.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE — Available for domestic and foreign nameplate vehicles

from

$89.99

Designed for the replacement of worn or damaged balance shaft chains, tensioners, and guides, Balance Shaft Chain Kits includes all components for a quick and efficient replacement. Each part is CAD designed and manufactured using premium materials. Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing.

Product Features:

Meet or exceed OEM performance requirements, ensuring a quiet and maintenance free experience
Utilizes the latest in design and technology to offer a complete chain kit solution
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance

from

$13.99

Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$39.49

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$114.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$18.99

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$3.99

This engine intake manifold expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine intake manifold expansion plug matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$124.99

Made in USA. Melling oil pumps provide dependable performance every time in every application. Every Melling oil pump is engineered and assembled to the highest production standards from high quality materials. All Melling oil pumps use the latest in gear and gerotor technology to provide the highest level of quality and performance. Gears are machined to close tolerances to ensure proper engine pressure and correct, efficient pump operation. End plates are precision ground for maximum wear resistance. Every Melling oil pump is individually tested for pressure and flow under conditions designed to duplicate actual engine operating conditions.

Product Features:

Manufactured from high quality materials for consistent durable wear
Precision engineered for optimum fit and function
Designed for long-life and worry-free performance
Melling oil pumps are tested for pressure and flow under operating conditions to ensure quality

from

$41.49

This engine crankshaft position sensor is designed to match the fit and function of an original sensor to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage.

Product Features:

Direct replacement – this engine crankshaft position sensor is designed to match the fit and function of an original sensor on specified vehicles.
Ideal solution – engineered to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage.
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$27.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to BUIC 82-84; CADI 82-86; CHEV 82-84; OLDS 82-84; PONT 82-85;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1982-1986
Weight approx: 3 Lbs

from

$14.65

Engine Torque Rod

from

$79.99

For use on the most popular passenger car, light commercial and four-wheel drive applications, Dayco harmonic balancers use special rubber compounds to dampen and remove engine harmonics and add to engine performance. Manufactured using a premium ductile iron casting and injection bonded dampening rubber, Dayco harmonic balancers offer engine builders and technicians the highest quality replacement to standard OEM balancers, which are typically made with press inserted dampening rubber. Dayco balancers utilize both inserted and pressure-bonded rubber to provide superior bonding strength between the inner and outer balancer rings, helping minimize spin and dislocation.

Product Features:

Designed as premium OEM replacement balancers for serpentine and V-belt drives
Manufactured with ductile iron casting and injection bonded dampening rubber
Engineered to offer superior bonding strength between the balancer rings

from

$14.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

Upgrade your 1999 Chevrolet Cavalier with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 1999 Chevrolet Cavalier, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Engine Parts are key to keeping your Cavalier functioning at its best. At Advance Auto Parts, we offer a wide selection of 135 Engine Parts for the 1999 Chevrolet Cavalier, designed to meet your needs without breaking the bank. From Engine Gaskets and Seal replacements to Engine Mounts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 1999 Chevrolet Cavalier at great prices. Our Engine Parts inventory for this model ranges from just $0.51 to $1,982.99, with an average price of $62.34. Our 135 Engine Parts in stock come from 19 trusted brands, so you’re sure to find the right part for your 1999 Chevrolet Cavalier without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1999 Chevrolet Cavalier, we stock popular OEM and aftermarket Engine Parts from top names like FELPRO, National, Carquest Premium, and more. FELPRO Engine Parts start at just $3.99 and boast an impressive 5 stars average rating from customers. National and Carquest Premium also bring quality to the table, with Engine Parts available starting at $6.49, and at an average 4 stars rating. With 383 customer reviews and counting, our 1999 Chevrolet Cavalier Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1999 Chevrolet Cavalier is always ready to roll. We’re committed to providing you with everything you need to keep your Cavalier in top shape, all in one place. Start shopping confidently below for your 1999 Chevrolet Cavalier!

Best-Selling Engine Gaskets and Seals for 1999 Chevrolet Cavaliers

Enhance the driving experience in your Chevrolet with 17 quality Engine Gaskets and Seal components, starting at $3.99.

show more show less

from

$31.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$27.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$21.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$25.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$27.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$21.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$39.49

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$52.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$20.21

Mahle is the largest gasket manufacturer in the world, providing you original equipment design and quality and world class aftermarket service. Mahle does not just cut gaskets – it designs total system sealing approaches that utilize application engineering. This means that regardless of what application you are trying to seal, you can count on Mahle doing the research and testing to provide the optimum material and technology for that specific application – this systems sealing approach requires a variety of materials. No other gasket manufacturer offers the Application Engineered approach to sealing an engine. A variety of different gasket materials insure an engine gets the optimal seal. All gaskets are not created equal – Mahle gaskets prove it every day.

Product Features:

Original equipment design and quality
Utilizes OE equivalent or better materials

from

$148.99

Each 260 gasket set includes Fel-Pro½ gaskets (# 1 brand of gaskets)
Provides the exact gaskets the application requires.
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$114.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$72.82

The ACDelco GM Original Equipment Engine Timing Cover Gasket is a GM-recommended replacement for your vehicle’s original component. This gasket works with the metal cover installed over the engine timing chain to create a tight seal that prevents engine oil from spraying or leaking onto your vehicle’s engine, while keeping dirt and debris out of sensitive engine components. This original equipment engine timing cover gasket has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Helps prevent engine oil from spraying or leaking onto your vehicle’s engine, while keeping dirt and debris out of sensitive engine components
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$72.62

Helps prevent engine oil from spraying or leaking onto your vehicle’s engine, while keeping dirt and debris out of sensitive engine components
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$27.99

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$23.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE — Available for domestic and foreign nameplate vehicles

from

$8.35

Oil Pan Gasket

from

$3.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

Most Popular 1999 Chevrolet Cavalier Engine Mounts

Customize your Chevrolet with 4 Engine Mounts products like Engine Mounts, Engine Mount and Torque Struts, and Engine Torque Dampers, all priced under $32.49.

show more show less

from

$31.49

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1995-2005
Weight approx: 2 Lbs

from

$32.49

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to BUIC 92-98; CHEV 92-02; OLDS 92-98; PONT 92-02;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1992-2002
Weight approx: 3 Lbs
HYDRAULIC
INSERT ONLY

from

$31.06

International Suspension Group engine and transmission mounts are designed to the highest quality standards and manufactured using leading-edge technology.

Product Features:

High quality steel for mounts cast aluminum or steel frames (e-Coating being employed for corrosion resistance)
Rubber: high quality NVH rubber which is same used in OE applications
All mounts meet or exceed OEM specifications utilizing OE quality testing procedures
ISO/TS16949 manufacturer for OE contracts
All included hardware made of hardened steel with superior bolts
Hydro-Electric mounts have the same number of components as OE, where applicable
Electrical connectors are fully functional

from

$14.65

Engine Torque Rod

Top Picks for 1999 Chevrolet Cavalier Camshafts

Upgrade Chevrolet Cavaliers with top-quality Camshafts parts, including 15 OEM and aftermarket selections for your 1999 model.

show more show less

from

$35.99

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

Our knock sensors are designed to respond to knock frequencies up to 1000 Hz accommodating shifts in engine knock frequency making it a more flexible sensor responding to correct engine knock over a broad range of vehicle conditions
Manufacturing processes include an automated data acquisition system to continuously monitor the sensor output to ensure that it responds with appropriate voltage output at the specified frequency range
All units are 100% tested using an accelerometer vibration test to ensure trouble-free operation
Featuring the broadest sensor coverage in the market, we meet the service professionals needs with the highest quality product every time he opens the box
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$35.99

Our control modules feature double wire bonds for better connections, greater dependability and longer life despite being subjected to intense vibration and the tough operating environment
Copper slug heat sinks provide better heat dissipation to prevent heat from damaging the module
Our ignition modules will respond to a weak signal from the crankshaft position sensor and begin energizing the coils immediately for better starts in cold weather
High-temperature polymer housing reducing moisture intrusion and minimizes vibration damage for extended life and improved reliability
Our ignition modules are durability tested for 500 thermal cycles ranging from -40C to +125C

from

$44.99

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$31.49

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$85.99

A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments.

Product Features:

Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
Manufactured in an anti-static environment to ensure reliability and stability.
Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

from

$19.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$12.49

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$39.49

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$32.99

Products are produced in ISO 14001 and IATF 16949 certified facilities to ensure the highest quality and consistency throughout the production process.
Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
Manufactured in an anti-static environment to ensure reliability and stability.
Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

from

$82.99

Designed digital output for maximum signal to noise ratio. Not impacted by temperature changes and provide robust, long-lasting sensor protection. Manufactured to meet or exceed OE requirements.

Product Features:

Delphi products are manufactured in a Delphi ISO certified facility
Designed digital output for maximum signal to noise ratio
All parts used in the manufacture process are Delphi validated
Not impacted by temperature changes and provide robust, long-lasting sensor protection

from

$26.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$113.99

Made In USA. Melling engine assembly lube, MELL-LUBE, is formulated to be an initial lubricant on camshaft metal surfaces as well as related valve train parts. The added zinc material (1400 ppm) provides MELL-LUBE with added protection to prevent scoring and galling during initial engine start-up for both newly rebuilt and / or remanufactured engines. In addition, MELL-LUBE contains corrosion inhibitors to prevent rust and pitting of components. MELL-LUBE mixes with any engine oil and will not clog filters. Melling recommends MELL-LUBE be a part of every camshaft install.

from

$48.99

Delphi products are manufactured in a Delphi ISO certified facility
Designed digital output for maximum signal to noise ratio
All parts used in the manufacture process are Delphi validated
Not impacted by temperature changes and provide robust, long-lasting sensor protection

from

$46.49

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$30.49

This engine camshaft position sensor is designed to match the fit and function of an original sensor to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage.

Product Features:

Direct replacement – this engine camshaft position sensor is designed to match the fit and function of an original sensor on specified vehicles
Ideal solution – engineered to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

In-Demand Valve Cover and Cylinder Heads for 1999 Chevrolet Cavaliers

Select from 9 premium Valve Cover and Cylinder Heads parts for your 1999 Chevrolet Cavalier, with prices ranging from $0.51 to $478.99.

show more show less

from

$29.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$81.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts

from

$19.99

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$31.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$4.29

from

$23.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts

from

$478.99

Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$237.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts

from

$0.51

Most Sold 1999 Chevrolet Cavalier Engine Timing Parts

Explore our best-selling Chevrolet parts for the 1999 Cavalier among 29 OEM and aftermarket options starting from $11.29.

show more show less

from

$18.99

Made of stainless steel
Designed to prevent timing cover seal leaks
Takes up gaps caused by worn-out harmonic balancer shafts

from

$12.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$11.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Engine$aver Hardware cost-saving application
Repairs worn sealing surfaces to assure a leak free repair
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function
Validated for fit, form, and function

from

$74.99

Advance Auto Parts is proud to carry this kit with the best fitment and performance requirements for this application, from the highest quality timing component vendor.

Product Features:

Includes 1 Cam Sprocket, 1 Chain, 1 Crank Sprocket, 1 Tensioners, 1 Oil Passage Plug
4 Pieces
Meets or exceeds O.E.M. performance
Coated in rust preventative

from

$55.99

Advance Auto Parts is proud to carry this part with the best fitment and performance requirements for this application, from the highest quality timing component vendor.

Product Features:

The part is precision machined with high grade material for greater durability
Maintains excellent chain or belt tension
Meets or exceeds O.E.M. performance
Part is quality inspected and tested

from

$55.99

Timing Chain Kits includes all components for a quick and efficient replacement

Product Features:

Meet or exceed OEM performance requirements, ensuring a quiet and maintenance-free experience
Utilizes the latest in design and technology to offer a complete chain kit solution
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information

from

$28.99

Includes timing cover seal and harmonic balancer sleeve
Solves the oil leaking around timing cover seal
Made of stainless steel
Takes up gaps caused by worn-out harmonic balancer shafts

from

$29.99

A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design, tensioners can use spring tension or hydraulic pressure to properly tension the chain. Please refer to our online catalog for detailed application-specific information

Product Features:

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Meet or exceed OEM performance requirements
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

from

$218.99

Timing Chain Kits includes all components for a quick and efficient replacement

Product Features:

Meet or exceed OEM performance requirements, ensuring a quiet and maintenance-free experience
Utilizes the latest in design and technology to offer a complete chain kit solution
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information

from

$75.99

Timing Set includes all components for a quick and efficient replacement. Matched Timing Set to Eliminate the Tensioner.

Product Features:

Utilizes the latest in design and technology to offer complete chain sets
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Utilizes the latest in design and technology to offer complete chain sets
Refer to our online catalog for detailed application-specific information
Set Includes: Cam Sprocket, Crank Sprocket, Timing Chain and Cup Plug. Problem Solver Set – Improved Design – Matched Timing Set. Set was redesigned to eliminate the need for the OE chain tensioner.

from

$49.99

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Meet or exceed OEM performance requirements
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

from

$54.99

Timing Set includes all components for a quick and efficient replacement

Product Features:

Utilizes the latest in design and technology to offer complete chain sets
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Utilizes the latest in design and technology to offer complete chain sets
Refer to our online catalog for detailed application-specific information
Set Includes: Cam Sprocket, Crankshaft Sprocket, Timing Chain

from

$46.99

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

from

$39.99

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

from

$142.99

Meet or exceed OEM performance requirements, ensuring a quiet and maintenance free experience
Utilizes the latest in design and technology to offer a complete chain kit solution
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance

from

$145.99

Timing Set includes all components for a quick and efficient replacement

Product Features:

Utilizes the latest in design and technology to offer complete chain sets
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Utilizes the latest in design and technology to offer complete chain sets
Refer to our online catalog for detailed application-specific information
Set Includes: Cam Sprocket, Crankshaft Sprocket, Timing Chain

from

$51.53

MAHLE Cleveite Inc. is not responsible for failures resulting from owner, operator or third party abuse or neglect including, but not limited to engine operation without adequate lubricant or coolant, over or under-fuelling, over-speeding, lack of proper maintenance to cooling, lubrication or air intake systems, improper storage, starting, warm-up, run-in or shutdown procedures or the continued operation of an engine after the first sign of a malfunction. MAHLE Cleveite Inc. is not responsible for failures resulting from improper installation or repair procedures, alteration or the misapplication of parts, or use in engines modified for competition or levels of performance beyond the engine manufacturers original specifications. Mahle/Cleveite – (The MAHLE Group) is one of the largest global automotive parts manufacturers, specializing in Engine Components, Filtration and Peripherals.

from

$45.99

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$36.99

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

from

$33.52

from

$27.49

ACDelco GM Original Equipment Engine Timing Chain Tensioners help maintain a consistent amount of tension within the timing chain to help reduce the effect that slack has on the valve timing of the engine, and are GM-recommended replacements for your vehicle’s original components. These original equipment tensioners have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Provides consistent tension to help keep engine running in proper time
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$23.99

A timing chain guide serves as a track or guide, for the timing chain, connecting the crankshaft and camshaft. Designed to meet or exceed OEM performance requirements, timing guides, which are available in kits or as a stand-alone product, utilize the latest in design and material technology, ensuring quiet and maintenance-free experience

Product Features:

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Designed to meet or exceed OEM performance requirements
Refer to our online catalog for detailed application-specific information

from

$21.99

Extensively tested and measured for function, fitment, and durability to ensure optimal performance
CAD designed and manufactured using premium materials
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
Refer to our online catalog for detailed application-specific information

from

$19.99

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$19.99

Extensively tested and measured for function, fitment, and durability to ensure optimal performance
CAD designed and manufactured using premium materials
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
Refer to our online catalog for detailed application-specific information

from

$18.99

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Designed to meet or exceed OEM performance requirements
Refer to our online catalog for detailed application-specific information

from

$17.99

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Designed to meet or exceed OEM performance requirements
Refer to our online catalog for detailed application-specific information

from

$15.99

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$13.99

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

Top-Rated Engine Parts Brands For Your 1999 Chevrolet Cavalier

Shop for the best-rated brands offering Engine Parts and other products for your 1999 Chevrolet Cavaliers. Below you’ll find some of our best rated Engine Parts from FELPRO, National, and Carquest Premium, and more. Engine Parts from these brands that fit a 1999 Cavalier start at just $3.99 and are rated as high as 5 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 1999 Chevrolet Cavalier Engine Parts

When it comes to maintaining or upgrading your 1999 Chevrolet Cavalier, using quality Engine Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Engine Parts, specifically designed for the 1999 Chevrolet Cavalier. With over 17 FELPRO brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $3.99, with an average price of just $44.82. Plus, with over 70 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$21.29

This product is not rated

Engine Valve Cover Gasket Set

“”

from
$237.99

This product is not rated

Cylinder Head Gasket Set

“”

from
$23.49

This product is not rated

Cylinder Head Gasket: Composite, Without Head Bolts

“”

Popular National 1999 Chevrolet Cavalier Engine Parts

National auto parts is one of the highest quality Engine Part brands in the market. Any 1999 Chevrolet Cavalier owner should feel confident when installing genuine National parts in their vehicle. To ensure the best fit and performance for your 1999 Cavalier, Advance Auto Parts carries a full inventory of 8 National Engine Parts. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these National Engine Parts range from $12.99 to $52.99, plus, with more than 25 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

from
$39.49

This product is not rated

Multi Purpose Seal

“”

from
$28.99

This product is not rated

Engine Harmonic Balancer Kit

“”

from
$52.99

This product is not rated

Shaft Repair Sleeve

“”

FAQs for 1999 Chevrolet Cavalier Engine Parts

Which Engine Parts are best-sellers for 1999 Chevrolet Cavaliers?

Out of 135 Engine Parts that fit 1999 Chevrolet Cavaliers, the following parts are the top sellers:

Multi Purpose Seal (3271684) – $12.99
Rubber Expansion Plug 1-5/8 In. – Size Range 1-5/8 In. – 1-3/4 In. (5701295) – $6.99
Engine Valve Lifter (15680009) – $19.99

What’s the price range for 1999 Chevrolet Cavalier Engine Parts?

Engine Part prices for the 1999 Chevrolet Cavalier start at $0.51 and go up to $1,982.99 for the most premium parts.

What’s the average price of a Engine Part for a 1999 Chevrolet Cavalier?

The average price for Engine Parts for the 1999 Chevrolet Cavalier is $62.34. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Chevrolet Cavalier model years?

Yes, we currently carry Engine Parts for 23 model years of Chevrolet Cavaliers between 1982 and 2005. Engine Parts are bought most frequently for the following model years: 2005, 2004, 2003, 2002, 2001, 2000, 1998, 1997, and 1996.

What are the cheapest Engine Parts for my 1999 Chevrolet Cavalier?

The cheapest 1999 Chevrolet Cavalier Engine Parts we carry in stock are:

Engine Valve Spring Retainer Keeper (19694171) – $0.51
Steel Cup Expansion Plug 42.3mm, Height 0.500 (sold by each) (16140169) – $1.29
Stock Replacement Oil Pump Shaft Guide (3716619) – $1.99
Fuel Injector O-ring Set (15780910) – $3.99
Engine Timing Cover Gasket (10307023) – $3.99

What are the top-rated Engine Parts that fit the 1999 Chevrolet Cavalier?

Out of 383 reviews by customers, our 1999 Chevrolet Cavalier Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 1999 Chevrolet Cavalier and their top-rated products:

Valve Cover and Cylinder Heads
- CYLINDER HEAD BOLT SET (15780274) – $29.99
- Cylinder Head Gasket Set (15780294) – $81.99
- Cylinder Head Gasket: Composite, Without Head Bolts (15780006) – $31.49
Engine Gaskets and Seals
- CYLINDER HEAD BOLT SET (15780274) – $29.99
- Cylinder Head Gasket Set (15780294) – $81.99
- Cylinder Head Gasket: Composite, Without Head Bolts (15780006) – $31.49

What types of Engine Parts do you sell for my 1999 Chevrolet Cavalier?

As of 2/5/25, these are some of the most in-demand types of Engine Parts for a 1999 Chevrolet Cavalier:

Can I get help with 1999 Chevrolet Cavalier Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Engine Parts and more.

What is your return policy for Chevrolet Cavalier Engine Parts?

Advance Auto Parts keeps returns simple. For new Chevrolet Cavalier Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1999 Chevrolet Cavalier Engine Parts

Cloyes Gear – Engine Timing Chain (Part No.9-4201)

Imperial – Ultra-Cool Engine Oil Cooler Kit (Part No.240457)

Cloyes Gear – Primary Timing Chain Kit: Exact Fit, 148 Links, Timing Components, With Sprockets (Part No.9-4201S)

National – Multi Purpose Seal (Part No.5273)

Melling – Stock Replacement Engine Assembly Lubricant (Part No.M-10012)

MAHLE Original – Engine Timing Cover Seal (Part No.65022)

Cloyes Gear – Engine Balance Shaft Chain Guide (Part No.9-5384)

Dorman – Pik-a-Nut – Steel Cup Expansion Plug 34.3mm, Height 0.497 (Part No.362765.1)

Carquest Premium – Engine Oil Filler Cap: 10066, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10066)

Melling – Engine Oil Priming Tool (Part No.MPL-201)

Sealed Power – CAST PISTON (Part No.H1120CPA .50MM)

Sealed Power – Engine Crankshaft Main Bearing Set (Part No.7421M 20)

Anchor – Torque Strut Motor Mount: Front, 1 Piece (Part No.2798)

Felpro – VALVE COVER GASKET SET (Part No.VS 50485 R)

MAHLE Original – Engine Crankshaft Seal (Part No.JV1705)

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 72807-1)

Cloyes Gear – Balance Shaft Timing Chain Kit: Exact Fit, 134 Links, Balance Shaft Components, Without Sprockets (Part No.9-4202SX)

Cloyes Gear – Engine Timing Crankshaft Sprocket (Part No.S747)

Sealed Power – Engine Camshaft Bearing Set (Part No.1485M)

Felpro – Gasket Kit (Part No.260-1884)

Cloyes Gear – Engine Timing Camshaft Sprocket (Part No.S558T)

Dorman – Rubber Expansion Plug 7/8 In. – Size Range 7/8 In. – 1 In. (sold by each) (Part No.570-004)

Melling – Stock Replacement OE Type Oil Pump (Part No.M205)

Dorman – Crankshaft Position Sensor (Part No.917-713)

Anchor – Engine Mount: Front Right, 1 Piece (Part No.2473)

International Suspension Group – Engine Torque Rod (Part No.A7030321251ISG)

PowerBond – Premium OEM Replacement Harmonic Balancer; 163mm Diameter (Part No.PB1515N)

Felpro – TIMING COVER GASKET SET WITH REPAIR SLEEVE (Part No.TCS 45976)

Felpro – Engine Crankshaft Seal Kit (Part No.BS 40625)

Felpro – TIMING COVER GASKET SET (Part No.TCS 45793)

Felpro – VALVE COVER GASKET SET (Part No.VS 50485 R)

Felpro – Oil Pan Gasket Set: Cork-Rubber, With Gasket Sealant, 4 Piece Set (Part No.OS 34300 C)

Felpro – TIMING COVER GASKET SET WITH REPAIR SLEEVE (Part No.TCS 45762)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50445 R)

National – Multi Purpose Seal (Part No.4307V)

National – Shaft Repair Sleeve (Part No.99298)

Mahle – Mahle Valve Cover Gasket (Part No.A8030210195MAH)

Sealed Power – Engine Gasket Set (Part No.260-1884)

Felpro – Gasket Kit (Part No.260-1884)

ACDelco – GM Original Equipment Timing Cover Gasket (Part No.A8050210173ACD)

ACDelco – GM Original Equipment Timing Cover Gasket (Part No.A8050210168ACD)

Victor Reinz – Engine Timing Cover Gasket (Part No.71-14596-00)

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 72807-1)

Mahle – Oil Pan Gasket (Part No.A6130205651MAH)

MAHLE Original – Engine Timing Cover Gasket (Part No.T31351)

Anchor – Torque Strut Motor Mount: Front, 1 Piece (Part No.2798)

Anchor – Engine Mount: Front Right, Right, 1 Piece (Part No.2803)

International Suspension Group – International Suspension Group Engine Mount (Part No.A7000343282ISG)

International Suspension Group – Engine Torque Rod (Part No.A7030321251ISG)

Carquest – Air Charge Temperature Sensor Connector (Part No.PT778)

Carquest – Engine Camshaft Position Sensor Connector (Part No.PT196)

ACDelco – Black Multi-Purpose Pigtail (Part No.PT2782)

Carquest Premium – 4WD Indicator Light Switch Connector (Part No.PTA1019)

Carquest Premium – Camshaft Sensor (Part No.CSC1259)

Carquest Premium – A/C Compressor Cut-Out Switch Harness Connector (Part No.ABA3459)

Carquest Premium – ABS Wheel Speed Sensor Connector (Part No.ABA3461)

Sealed Power – Engine Camshaft Bearing Set (Part No.1485M)

Carquest Premium – Engine Camshaft Position Sensor (Part No.CSA1487)

Delphi – Engine Camshaft Position Sensor (Part No.SS10005)

Carquest Premium – Engine Camshaft Position Sensor Connector (Part No.PTA1352)

Melling – Stock Replacement Engine Assembly Lubricant (Part No.M-10012G)

Delphi – Engine Camshaft Position Sensor (Part No.SS10004)

National – Shaft Repair Sleeve (Part No.99176)

Dorman – Magnetic Camshaft Position Sensor (Part No.907-812)

Felpro – CYLINDER HEAD BOLT SET (Part No.ES 72170)

Felpro – Cylinder Head Gasket Set (Part No.HS 9170 PT-1)

Sealed Power – Engine Valve Lifter (Part No.HT-2270)

Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.9170 PT-1)

Sealed Power – Engine Push Rod (Part No.RP-3341)

Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.9059 PT)

Spartan – Engine Cylinder Head; Chev 2.2 99-03 Cyl Head (Part No.2CV7)

Felpro – Cylinder Head Gasket Set (Part No.HS 9059 PT)

Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-283)

National – Engine Harmonic Balancer Repair Sleeve (Part No.88176)

National – Multi Purpose Seal (Part No.9845)

Felpro – Engine Timing Cover Repair Sleeve (Part No.16202)

Carquest Premium – Complete Timing Set (Part No.76103)

Carquest Premium – Chain Tensioner (Part No.9356)

Cloyes Gear – Engine Timing Chain Kit (Part No.9-0370S)