1999 Chevrolet C1500 Bodies and Fender Parts

Dorman offers a comprehensive line of Clip / Spring Nuts for a range of automotive applications. They are available for use with a large variety of screw sizes, throat depths, and panel ranges.

Product Features:

• Constructed of high-quality materials for long-lasting durability
• Many different styles are available, including threaded and wide panel
• Packaged in a variety of piece counts for use with both small and large projects
• Also suitable for a broad range of industrial and commercial uses

Dorman offers a comprehensive line of Clip / Spring Nuts for a range of automotive applications. They are available for use with a large variety of screw sizes, throat depths, and panel ranges.

Product Features:

• Constructed of high-quality materials for long-lasting durability
• Many different styles are available, including threaded and wide panel
• Packaged in a variety of piece counts for use with both small and large projects
• Also suitable for a broad range of industrial and commercial uses

New Standard Replacement Driver Side Rocker Panel, 75 X 5.38 X 2.88

Product Features:

• 75 X 5.38 X 2.88, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Product Features:

• Required Part For Oval Tubes
• Vehicle Specific Mount Kit Insures Proper Fit

LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforate

Product Features:

• Full front end coverage
• Custom fit exactly to your vehicle
• Installs easily with no drilling or tools
• Leather grain vinyl
• Protect against rock chips, bugs and road tar
• Soft inner layer

New Standard Replacement Driver Side Complete Cab Floor Section, Inner And Outer With Backing Plate, 26 1/2 X 23 X 7 1/2

Product Features:

• Inner And Outer With Backing Plate, 26 1/2 X 23 X 7 1/2, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Westin Molded Running Boards are straight board OE style designs, available in three universal lengths (72in, 79in, 93in). Universal running boards are made of an extruded aluminum base board, feature a 1-piece construction and provide step area grooves for secure footing. Available in lighted or unlighted styles. Universal running boards require a 27-series vehicle specific mounting kit, sold separately.

Product Features:

• OE Style
• UV Resistant Black Molded Polymer
• Extruded Aluminum Base Board
• Cradle Mounted Boards
• Customized Mounting Brackets Sold Separately
• Adds Perfect Finishing Touch To Vehicle

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:

• Assures Longer Lasting Cab to Bed Alignment
• Replace to Restore Ride Height
• Gain Durability
• Stronger Than Original Rubber Mounts

Don’t let worn body mounts ruin your vehicle’s comfortable ride. This body mount includes all the hardware required for an easy replacement. Made with quality materials for a long service life, this vehicle-specific design is a perfect fit.

Product Features:

• Direct replacement – this body mount fits and functions like the original equipment mount
• Quality construction – manufactured from premium materials for a long service life
• Excellent value – original equipment quality at a lower price
• Quality tested – has undergone testing to ensure proper fit and performance

New ProEFX Rear Roll Pan, Stepside, Without License Plate Part

Product Features:

• Stepside, Without License Plate Part
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New ProEFX Rear Roll Pan Without License Plate

Product Features:

• Without License Plate
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New, Standard Replacement Flex Edge, With 3/4 Lip, 36 X 3

Product Features:

• Meets All Federal Motor Safety Standards
• No Drilling Or Modifications Needed For Installation
• Same Form Fit As OE

New Economy Replacement Front Valance, Without Sport Trim, Without Tow Hooks

Product Features:

• Without Sport Trim, Without Tow Hooks, Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New CAPA Certified Standard Replacement Front Valance, Without Sport Trim, Without Tow Hooks

Product Features:

• Without Sport Trim, Without Tow Hooks, Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Needa Parts, a division of the Hillman Group, is an industry leader in all types of automotive body fasteners, retainers, and clips, offering over 400 SKUs of interior, exterior, and underhood fasteners.

Product Features:

• Needa Parts offers a complete assortment for all popular makes and models
• Vehicle make specific fastener kits are available
• All fasteners meet or exceed OEM standards

New Standard Replacement Passenger Side Upper Wheel Arch Patch, 41 X 12 X 2

Product Features:

• 41 X 12 X 2, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Driver Side Upper Wheel Arch Patch, 41 X 12 X 2

Product Features:

• 41 X 12 X 2, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Economy Replacement Rear Step Bumper Assembly, Black, Finish, Without Impact Strips, For Fleetside Models

Product Features:

• Black, Finish, Without Impact Strips, For Fleetside Models, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Premium Replacement Rear Step Bumper Assembly, Chrome, With Impact Strips, For Fleetside Models

Product Features:

• Chrome, With Impact Strips, For Fleetside Models, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Saddle mounted step pad. Molded oval end caps. Features cradle mounted tubes and no drill installation. Black powder coated mild steel finish.

Product Features:

• Vehicle Specific Mounting Kit Required; Sold Separately
• 4 in. Oval Tube
• Injection Molded Polymer Step Pad
• Molded Oval End Caps
• Bolt-On Installation; No Drilling Required
• Limited Lifetime Warranty

ARIES 3″ side bars add a custom look and dependable footing to your truck, Jeep or SUV. They feature a classic style, a strong design and non-skid step pads. ARIES nerf bars are all made vehicle-specific for a custom, no-drill fit, and they are available in multiple finish options. This set of nerf bars is constructed from 304 stainless steel with a polished finish. Our 304 stainless steel is a true stainless with high nickel content, offering better corrosion resistance and a long-lasting finish. The polish is a triple application, resulting in a mirror-like shine to complement your vehicle. ARIES 3″ round side bars also come with high-strength steel brackets and non-skid step pads. The mounting brackets — as well as the side bars and step pads — are custom-designed for specific makes and models to allow the nerf bars to contour to the lines of your vehicle. This ensures easy, no-drill installation and the strength necessary to provide solid footing. This particular set of custom nerf bars fits specific years of the Chevy or GMC C1500, C2500, C3500, K1500, K2500 and K3500 (see application info to verify fitment). ARIES 3″ round side bars also come with non-skid step pads made of polypropylene. These wide, custom-positioned step pads feature a textured pattern and cover a wide portion of the tubes to be more comfortable and high-traction, even in wet conditions.

Product Features:

• Unique bends to contour to the body of the vehicle
• Custom, non-skid step pads for safe entry and exit
• 3″ diameter, heavy-wall tube design
• 304 stainless steel construction to be strong and truly rust-resistant
• Mirror-like polished stainless steel finish for a bright, clean accent
• No-drill, vehicle-specific application for a custom fit
• Heavy-duty steel mounting brackets for a solid step

Westin introduces their new Premier 6 Oval Tube Steps in a highly Polished Stainless Steel or Black Powdercoat Mild Steel finish. The new Premier 6 Oval Side Bars offer tough solid construction with a sleek 5 step pad. Available in 4 lengths 53 75 85 and 91. To ensure a perfect fit Vehicle-Specific Mounting Kits are required and are purchased separately. Each mounting kit is exactly machined for a No-Drill Installation.

Product Features:

• Unique Style w/Tough Construction
• Sleek Style And Finish
• OE Style Look
• UV Stable 5 in. Wide Step Pad
• Stylized End Caps
• Contoured Step Pad

Westin(TM) E-Series Nerf Bars are made of 3in. diameter round tubing and are vehicle specific designs. Step design and mounting technique varies by application (mounting kit included). They feature recessed area mounted step pads unique to E-Series Nerf Bars feature the Westin(TM) brand name and are UV resistant.

Product Features:

• Mount Kit Included
• 3 in. Round Step Bars
• Economical Step-Up Solution
• Vehicle Specific Applications
• Injection Molded Polymer Step Pad
• Recessed Step Area
• Bolt-On Installation; No Drilling Required

For solid footing, a comfortable step and a bold look for your truck, ARIES 6″ oval side bars are a step up. They are designed to mimic the style popular original equipment side bars and running boards, featuring two professional finish options, large non-skid step pads and tapered end caps. This particular pair of 6″ ovals is made with 304 stainless steel, meaning they are high in nickel content to be truly resistant to rust and corrosion. For a lasting shine and a bright accent on your vehicle, they are given a highly polished, mirror-like finish. They are also available in semi-gloss black powder-coated aluminum. To protect the interior of the tubes, all 6″ oval sides are equipped with hard ABS plastic end caps. The end caps come pre-attached to the tubes and feature a tapered design, lending to the overall OE look of the side bars and providing a professional finishing touch on your truck or SUV. For a sure step every time you climb into your vehicle, ARIES 6″ ovals are equipped with extra-wide step pads. The step pads are made from tough polypropylene and provide a generous 5″ width. The large, flat surface offers comfortable footing and has a textured surface to prevent slipping, even when wet. The polypropylene construction makes the step pads durable and crack-resistant for long-lasting use. ARIES 6″ oval side bars are also made for easy, no-drill installation. The boards themselves feature a track system for versatile application, and they mount using vehicle-specific brackets for a custom fit. The mounting brackets are made from high-strength carbon steel and use pre-existing holes to eliminate drilling during the installation process (NOTE: Mounting brackets for these side bars are sold separately. See the application information to find which brackets and side bars fit your vehicle).

Product Features:

• 6″ wide, OE-style tube with hard ABS plastic end caps
• 304 stainless steel construction to be strong and truly rust-resistant
• Mirror-like polished stainless steel finish for a bright, clean accent
• Extra-wide, non-skid step pads for safe, comfortable entry and exit
• Universal track mounting system for easy, secure installation
• No-drill, vehicle-specific application for a custom fit
• Heavy-duty, powder-coated steel mounting brackets for a solid step

Westin(TM) E-Series Nerf Bars are made of 3in. diameter round tubing and are vehicle specific designs. Step design and mounting technique varies by application (mounting kit included). They feature recessed area mounted step pads unique to E-Series Nerf Bars feature the Westin(TM) brand name and are UV resistant.

Product Features:

• Mount Kit Included
• 3 in. Round Step Bars
• Economical Step-Up Solution
• Vehicle Specific Applications
• Injection Molded Polymer Step Pad
• Recessed Step Area
• Bolt-On Installation; No Drilling Required

Saddle mounted step pad. Molded oval end caps. Features cradle mounted tubes and no drill installation. Black powder coated mild steel finish.

Product Features:

• Vehicle Specific Mounting Kit Required; Sold Separately
• 4 in. Oval Tube
• Injection Molded Polymer Step Pad
• Molded Oval End Caps
• Bolt-On Installation; No Drilling Required
• 3 Year Warranty