1999 BMW 740i Steering and Chassis Parts
More 1999 BMW 740i Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 1999 BMW 740i, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 1999 BMW 740i Steering and Chassis Parts
MOOG – Center Link (Part No.DS80674A)
from
$199.99
MOOG® Problem Solver® products incorporate proven design and engineering features for like new steering ease of installation and longer life. MOOG is the preferred steering and suspension brand of professional technicians and NASCAR crew chiefs.
Product Features:
See More
Product Features:
- Powdered metal gusher bearing design enables grease to flow through bearing
- Engineered steel composition results in a stronger component
- Full ball metal stud provides 360° of smooth consistent rotational movement resulting in more responsive steering
- Loose or worn chassis parts can lead to premature tire wear
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Rein – Ball Joint (Part No.SCB0224)
from
$39.99
Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.
Product Features:
See More
Product Features:
- Produced with high quality materials to ensure maximum life and a smooth ride
- Manufactured to strict engineering standards/specifications in materials and tolerances
- Part has a high corrosion resistance for maximum life
- Matches original equipment design specifications
Cardone – Power Steering Filter (Part No.20-P038F)
from
$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Febi – Ball Joint Snap Ring (Part No.L2027131288FEB)
from
$2.63
Every Febi Ball Joint Snap Ring maintains the OE quality and is to be replaced every time the ball joint is removed or replaced.
Product Features:
See More
Product Features:
- OE expertise and quality
- Precision manufactured
- Corrosion protection
Rein – Power Steering Suction Hose (Part No.PSH0163)
from
$40.99
Rein power steering hoses are manufactured with premium ContiTech OE quality hose material designed to withstand the high pressure demands of automotive power steering systems. Rein power steering hoses are designed to resist excessive heat, oil and ozone factors that breakdown rubber and cause premature failure in power steering systems.
Product Features:
See More
Product Features:
- Manufactured with premium ContiTech hose which offers maximum protection from premature failures.
- Designed as direct-fit replacements to ensure trouble-free proper installation.
- Complete with hardware and seals when necessary for installation to save installation time and additional costs.
- Restores your vehicle to safe and optimal performance levels.
- Replacing both pressure and return hoses together ensures optimal performance and safety levels.
CRP – Hose Clamp (Part No.Y3063860147CRP)
from
$3.55
Hose Clamp
First Equipment Quality – FEQ Idler Arm Bushing (Part No.M304036878FEQ)
from
$3.52
The FEQ idler arm bushing is designed to restore the idler arm to factory-like new condition. The FEQ OE quality replacement idler arm bushing is designed to reduce front-end vibration, shimmy and unsafe handling.
Product Features:
See More
Product Features:
- Improves steering response
- Repairs worn components
- Reduces vibration
- Reduces tire wear
MOOG – Suspension Control Arm and Ball Joint Assembly (Part No.RK90509)
from
$121.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
Rein – P/S Cooler Line (Part No.M2091117988RIN)
from
$92.29
P/S Cooler Line
Maval – Power Steering Pump, Remanufactured (Part No.M2010468168MAV)
from
$489.38
Since its founding in 1987 Maval Manufacturing has been a world leader in the remanufacturing of power rack and pinion systems and related components. Trusted by Original Equipment Service Organizations and Global Distributors alike, Maval has consistently delivered the finest Remanufactured Rack and Pinions, Gear Boxes, and Power Steering Pumps to customers around the globe. Applying OE-experience and standards results in a remanufactured power steering pump that offer like-new quality and dependability.
Product Features:
See More
Product Features:
- OEM-Quality and Direct Fit replacement
- Components are inspected and cleaned of rust and corrosion.
- Shaft and internal surfaces are inspected, reconditioned and polished.
- Seals and O-rings are replaced with new, OE-equivalent parts.
- Assembled units are 100% functionally tested for leaks and performance.
Maval – Steering Gear Box, Remanufactured (Part No.M1050567974MAV)
from
$359.02
Since it’s inception Maval has consistently delivered remanufactured products to customers who demand the highest quality and value.
Product Features:
See More
Product Features:
- 100% functional testing on all products produced.
- Computerized tests insure that all products meet the O.E. Performance specification.
- Performance and quality approvals from O.E. steering gear and pump manufacturers world wide.
International Suspension Group – Sway Bar Bushing (Part No.L1050138255ISG)
from
$3.60
Sway Bar Bushing
Lemfoerder – Lemfoerder Idler Arm (Part No.M302046367LEM)
from
$31.45
The Lemfoerder Idler Arm meets OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. The Lemfoerder idler arm is manufactured to exacting OE tolerances for a proper fit and function.
Product Features:
See More
Product Features:
- Original Equipment quality
- Coated surface to prevent corrosion and rust
- Fatigue tested for structural integrity
- Precision made components for an ideal fit and function
Febi – Febi Idler Arm (Part No.M3020144885FEB)
from
$99.62
The Febi Idler Arm meets OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. The Febi idler arm is manufactured to exacting OE tolerances for a proper fit and function.
Product Features:
See More
Product Features:
- Original Equipment quality
- Coated surface to prevent corrosion and rust
- Fatigue tested for structural integrity
- Precision made components for an ideal fit and function
MOOG – Steering Tie Rod End (Part No.ES3639)
from
$73.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Loose or worn chassis parts can lead to premature tire wear
- Exclusive cover plate protects against contaminants leaking into the bearing surface
- Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
- Patented cover plate design allows for tighter tolerances vs traditional designs for a more durable part
- Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
- Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
Rare Parts – Tie Rod End (Part No.RP29451)
from
$62.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Driveworks – Sway Bar Link Kit (Part No.DW-K90107)
from
$21.99
Driveworks chassis parts help to provide powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability. Also cover plate design allows for tighter tolerances vs. traditional cover plate designs, providing a more durable and extended life part. An enlarged ball joint receptacle in the lower control arm can cause a loose ball joint fit.
Product Features:
See More
Product Features:
- Gas Shielded Welding Reinforcement ensure the safety of driving under bad road condition
- Wrench flats at the base of the stud allow for the use of sockets for easy installation
Lemfoerder – Sway Bar Link (Part No.L1030655868LEM)
from
$21.46
The Lemfoerder Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
ZF – Power Steering Reservoir (Part No.M2030422018ZF)
from
$38.05
Power Steering Reservoir
Rein – Power Steering Reservoir (Part No.PSR0027)
from
$24.99
Rein Automotive OE quality power steering reservoirs, install, fit and perform the way the original manufacturer intended. These reservoirs are designed to match or exceed the OE materials used and are produced from virgin plastic with no regrind to prevent cracking from heat cycles and ensure the plastic is durable and will have a long service life.
Product Features:
See More
Product Features:
- Reservoir contains filter that is not-removable and reservoir must be replaced to keep power steering system functioning properly
- Produced from virgin plastic meeting/exceeding OE specifications and ensuring long life
- Direct fitment allows easy installation
- Manufactured to strict engineering standards/specifications in materials and tolerances
Vaico – P/S Pump Pulley (Part No.M2060255584VCO)
from
$47.69
P/S Pump Pulley
Rare Parts – Tie Rod Assembly (Part No.RP27808)
from
$134.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Complete with inner and outer tie rod ends
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Lemfoerder – Lemfoerder Tie Rod Assembly (Part No.M3000392455LEM)
from
$128.31
Tie rod assemblies from Lemfoerder with high grade synthetic socket materials provide not only greater resistance but also outstanding slide properties and excellent damping. Highly demanding requirements are put forward for the design/engineering, production, and assembly of Lemfoerder tie rod assemblies.
Product Features:
See More
Product Features:
- Original Equipment Manufacturer
- High grade synthetic socket materials
- Outstanding slide properties
- High ball stud articulation angles.
Rein – Power Steering Return Hose (Part No.PSH0204)
from
$37.99
Rein power steering hoses are manufactured with premium ContiTech OE quality hose material designed to withstand the high pressure demands of automotive power steering systems. Rein power steering hoses are designed to resist excessive heat, oil and ozone factors that breakdown rubber and cause premature failure in power steering systems.
Product Features:
See More
Product Features:
- Manufactured with premium ContiTech hose which offers maximum protection from premature failures.
- Designed as direct-fit replacements to ensure trouble-free proper installation.
- Complete with hardware and seals when necessary for installation to save installation time and additional costs.
- Restores your vehicle to safe and optimal performance levels.
- Replacing both pressure and return hoses together ensures optimal performance and safety levels.
Rein – Power Steering Return Hose Assembly (Part No.PSH0192)
from
$65.99
Rein OE Quality power steering return hoses are designed to withstand the harsh environment of the engine bay area from the outside along with the hot power steering oil from within. Rein power steering return hoses are formed to exceed OE blueprints using OE comparable braided rubber compound and include non damaging burr free clamps, bracket bushings, protective jacket(s), and heat sleeves(s) all as specified by the OE manufacturer.
Product Features:
See More
Product Features:
- Manufactured with premium ContiTech hose which offers maximum protection from premature failures.
- Designed as direct-fit replacements to ensure trouble-free proper installation.
- Complete with hardware and seals when necessary for installation to save installation time and additional costs.
- Restores your vehicle to safe and optimal performance levels.
- Replacing both pressure and return hoses together ensures optimal performance and safety levels.
Whiteline – Radius Arm Lower Bushing (Part No.W82977)
from
$80.99
Not many know but worn suspension bushings have an effect on braking performance. In particular these bushings tend to absorb most of the loads under braking resulting in severe wear and reduced braking efficiency over time. Replace these worn parts with Whiteline synthetic elastomer bushings that offer long lasting durability for a safer more predictable vehicle.
Product Features:
See More
Product Features:
- Internal grease reservoirs provide continual self lubrication for optimum friction management.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
Popular 1999 BMW 740i Steering and Chassis Parts Categories
1999 BMW 740i Steering and Chassis Parts
You count on your 1999 BMW 740i to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 63 Steering and Chassis Parts ranging in price from $2.63 to $845.99, you’re sure to find everything you need for your 1999 BMW 740i.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 21 different brands like Cardone, Driveworks, and Moog. 1999 BMW 740i Steering and Chassis Parts start as low as $2.63!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 81 extensive product reviews on 1999 BMW 740i Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Power Steering Return Hose Assembly with 5.0 stars and Suspension Control Arm and Ball Joint Assembly with 4.0 stars.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1999 BMW 740i below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 1999 BMW 740i
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1999 BMW 740i running right for years to come. In our inventory you’ll find brands like Cardone, Driveworks, Moog, and even more.
Popular Cardone Steering and Chassis Parts
You’ll find popular Cardone brand products across Power Steering Parts. All are waiting to get your 1999 BMW 740i back on the road. Some of the top-rated Cardone products in these categories are:
Top-Rated Steering and Chassis Parts
If are what you’re looking for, our inventory holds plenty. We stock brand Steering and Chassis Parts for your 1999 BMW 740i, and some of our most reviewed parts include:
FAQs for 1999 BMW 740i Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 1999 BMW 740i?
Out of 63 Steering and Chassis Parts for the 1999 BMW 740i, the most popular in our inventory are:
What are the top-rated 1999 BMW 740i Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your 1999 BMW 740i based on customer reviews/ratings are:
from
$121.99
(1)
Suspension Control Arm and Ball Joint Assembly
“It was a nice caliper. Had hoped emergency brake pin would have been included. Would have liked a better description of parts included. It was nice th”
from
$40.99
(1)
Power Steering Suction Hose
“Shipping time was as stated. The part was of good quality. Beware, as in my installation on my 740iL. The rubber hose section of the line is approxima”
