1998 Volkswagen Jetta Exhaust Parts

Essential Exhaust Parts for 1998 Volkswagen Jettas

Febi – Exhaust Hanger (Part No.H805038580FEB)

Exhaust Hanger

from

$8.40
Exhaust Hanger

BRExhaust – Exhaust Bracket (Part No.255-054)

Exhaust Bracket

from

$13.79
BRExhaust insulator mounts are high-quality replacements for original equipment hangers¿designed to fit right the first time. They’re conveniently available for a variety of car, truck, and van applications. BRExhaust exhaust insulator mounts are manufactured from premium rubber and steel to help keep your components in the right position, resulting in a longer lifespan for your exhaust system.

Product Features:
  • Designed to facilitate hassle-free exhaust repair
  • Precise fitment
  • Manufactured from quality materials to ensure maximum durability
See More

Flowmaster Inc. – 50 Series Muffler, 2.25in Center Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound (Part No.842452)

50 Series Muffler, 2.25in Center Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound

from

$169.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More

Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.54889)

Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed

from

$817.99
Combining industry-leading coverage with a direct fit OE-style replacement, Walker Quiet-Flow muffler assemblies deliver a precision fit, superior flow and OE-style sound. Quiet-Flow muffler assemblies are available for domestic and foreign vehicles.

Product Features:
  • EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
  • RESISTS CORROSION — Internal drainage system helps reduce moisture collection
  • BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
  • DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
See More

Meyle – Exhaust Stud (Part No.H100525458MEY)

Exhaust Stud

from

$2.21
Exhaust Stud

MAHLE Original – Catalytic Converter Gasket (Part No.F32609)

Catalytic Converter Gasket

from

$5.79
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Beck/Arnley – Exhaust Gasket (Part No.039-6099)

Exhaust Gasket

from

$8.79
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Made with high quality materials designed to resist high heat conditions
  • Reinforced for extra strength
  • Packaged in clear plastic for easy visibility and identification of all components
  • Application specific for this vehicle
See More

BRExhaust – Exhaust Washer (Part No.258-117)

Exhaust Washer

from

$5.99
BRExhaust offers exhaust flange washers for use with their premium exhaust components. BRExhaust washers deliver the strength of steel, a proper fit and an easier install or repair. They’re available for fitment on a variety of year/make/model applications.

Product Features:
  • Designed to facilitate hassle-free exhaust repair
  • Precise fitment
  • Manufactured from quality materials to ensure maximum durability
  • Easy installation
See More

BRExhaust – Exhaust Hanger (Part No.255-084)

Exhaust Hanger

from

$13.99
BRExhaust exhaust insulator mounts are high-quality replacements for original equipment hangers¿designed to fit right the first time. They’re manufactured from premium rubber and available for a variety of car, truck, and van applications. BRExhaust insulator mounts will help to keep your components in the right position, resulting in a longer lifespan for your exhaust system.

Product Features:
  • Exhaust accessory that enables a complete installation process
  • Precise fitment
  • Precise fitment
  • Manufactured according to strict OE standards
  • Reduced Vibration
See More

BRExhaust – Exhaust Hanger (Part No.255-034)

Exhaust Hanger

from

$21.49
BRExhaust exhaust insulator mounts are high-quality replacements for original equipment hangers¿designed to fit right the first time. They’re manufactured from premium rubber and available for a variety of car, truck, and van applications. BRExhaust insulator mounts will help to keep your components in the right position, resulting in a longer lifespan for your exhaust system.

Product Features:
  • Exhaust accessory that enables a complete installation process
  • Precise fitment
  • Precise fitment
  • Manufactured according to strict OE standards
  • Reduced Vibration
See More

BRExhaust – Exhaust Flange Gasket (Part No.256-395)

Exhaust Flange Gasket

from

$13.99
BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.

Product Features:
  • Designed to facilitate hassle-free exhaust repair
  • Precise fitment
  • Manufactured from quality materials to ensure maximum durability
  • Designed for a leak free connection
  • OE structure and design
  • Built to OEM specifications
  • Secure gas-tight connection
See More

HJS – Exhaust Gasket (Part No.H4000125941HJS)

Exhaust Gasket

from

$14.86
Exhaust Gasket

Flowtech – Terminator; Exhaust Tips (Part No.59905FLT)

Terminator; Exhaust Tips

from

$85.99


Product Features:
  • Show Quality Chrome Platinum
  • Durable Black Finish
  • Can Be Welded Or Clamped
  • Complete The System
  • Glass-Packed Resonators
See More

BRExhaust – Exhaust Connection Clamp (Part No.265-459)

Exhaust Connection Clamp

from

$17.99
BRExhaust exhaust clamps are a great choice to install on your new BRExhaust exhaust. These clamps will provide the proper fit and function to finish your install. Each clamp is offered in a variety of shapes and sizes to deliver perfect, gas-tight performance for your project. A BRExhaust exhaust plus new exhaust clamps equals longer service life!

Product Features:
  • Stainless steel construction
  • Exhaust accessory that enables a complete installation process.
  • Designed to facilitate hassle-free exhaust repair
  • Precise fitment
  • Manufactured from quality materials to ensure maximum durability
See More

BRExhaust – Exhaust Connection Clamp (Part No.265-687)

Exhaust Connection Clamp

from

$30.99
BRExhaust exhaust clamps are a great choice to install on your new BRExhaust exhaust. These clamps will provide the proper fit and function to finish your install. Each clamp is offered in a variety of shapes and sizes to deliver perfect, gas-tight performance for your project. A BRExhaust exhaust plus new exhaust clamps equals longer service life!

Product Features:
  • Stainless steel construction
  • Exhaust accessory that enables a complete installation process.
  • Designed to facilitate hassle-free exhaust repair
  • Precise fitment
  • Manufactured from quality materials to ensure maximum durability
See More

Walker – Direct Fit Catalytic Converter: No Fabrication Needed, EPA Compliance (Part No.52075)

Direct Fit Catalytic Converter: No Fabrication Needed, EPA Compliance

from

$161.99
Walker Resonators And Welded Resonator Assemblies provide precise tuning technologies to ensure excellent flow characteristics And OE-style sound. They feature 100% aluminized construction for longer life, quality appearance And favorable acoustics. These are OE-style resonators that fit, perform And sound like the original system.

Product Features:
  • EASY TO INSTALL – Meticulous pipe routing and OE-style hardware, flanges, and brackets for fast, easy installation
  • RESISTS CORROSION – Durable aluminized steel construction and helps reduce corrosion
  • FACTORY SOUND – OE-style louvered tubes (where applicable) help reduce radiated noise for factory-style sound quality
  • STRONG AND DURABLE – Features thick OE-style flanges, hardware and brackets for strength
  • GET MORE MILES FROM YOUR RESONATOR ASSEMBLY – Engineered to fit, perform and sound like the original system
See More

Walker – Exhaust Resonator and Pipe Assembly (Part No.55558)

Exhaust Resonator and Pipe Assembly

from

$449.99
Designed to fit, perform and sound like the original system, Walker resonators use precise tuning technologies to deliver excellent flow characteristics and OE-style sound.

Product Features:
  • EASY TO INSTALL — Meticulous pipe routing and OE-style hardware, flanges, and brackets for fast, easy installation
  • RESISTS CORROSION — Durable aluminized steel construction and helps reduce corrosion
  • FACTORY SOUND — OE-style louvered tubes (where applicable) help reduce radiated noise for factory-style sound quality
  • STRONG AND DURABLE — Features thick OE-style flanges, hardware and brackets for strength
  • GET MORE MILES FROM YOUR RESONATOR ASSEMBLY — Engineered to fit, perform and sound like the original system
See More

Walker – Exhaust Clamp (Part No.35337)

Exhaust Clamp

from

$8.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.

Product Features:
  • CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS?–?Made from quality material for durability and long life
  • BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
See More

Rein – Exhaust Clamp (Part No.H8020940847RIN)

Exhaust Clamp

from

$32.94
Exhaust Clamp

Elring – Exhaust Manifold Gasket (Part No.A8111315812ELR)

Exhaust Manifold Gasket

from

$9.30
Exhaust Manifold Gasket

MAHLE Original – Exhaust Manifold Gasket (Part No.MS19638)

Exhaust Manifold Gasket

from

$8.49
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Victor Reinz – Exhaust Manifold Gasket (Part No.71-37533-00)

Exhaust Manifold Gasket

from

$10.49
Whether you are a professional technician or a skilled do-it-yourselfer, you need easy access to Victor Reinz quality at every level of the engine all in one box and without any surprises. Protective packaging, informative labels, and state-of-the art electronic cataloging, ensure you receive precisely the gaskets and seals needed for a successful, long-lasting repair.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
  • Able to withstand temperatures of up to 1400 degrees F.
  • Durable against wear and tear between manifolds and cylinder heads.
  • Ensures an effective seal as manifold flanges warp in extreme conditions.
See More

Walker – Ultra EPA Direct Fit Catalytic Converter 2.375" Outlet (OD) (Part No.54751)

Ultra EPA Direct Fit Catalytic Converter 2.375" Outlet (OD)

from

$954.99
Designed to comply with EPA standards while delivering premium performance with assured compliance, Walker Ultra Direct-Fit Catalytic Converters provide premium performance and are available for import and domestic OBDII (1996 and newer) vehicles.

Product Features:
  • EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
  • DIRECT-FIT DESIGN — Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication and/or welding
  • KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
  • STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and durability
  • OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
See More

Walker – Catalytic Converter- EPA Ultra, Direct Replacement, No Fabrication Needed (Part No.54473)

Catalytic Converter- EPA Ultra, Direct Replacement, No Fabrication Needed

from

$731.99
Designed to comply with EPA standards while delivering premium performance with assured compliance, Walker Ultra Direct-Fit Catalytic Converters provide premium performance and are available for import and domestic OBDII (1996 and newer) vehicles.

Product Features:
  • EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO or NY. Legal inME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
  • DIRECT-FIT DESIGN — Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication and/or welding
  • KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
  • STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and durability
  • OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
See More

MagnaFlow – OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.49990)

OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter

from

$1191.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49990. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2005-2014 Volkswagen Jetta, 2012-2014 Volkswagen Passat, and more, this direct-fit catalytic converter also interchanges with OE parts 1K0 253 058 FJ and 1K0 254 510 L, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

Walker – Exhaust Pipe 2.125" Inlet (OD) 2.125" Outlet (OD) (Part No.55648)

Exhaust Pipe 2.125" Inlet (OD) 2.125" Outlet (OD)

from

$78.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
  • EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
  • OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
See More

Walker – Exhaust Pipe 2.125" Inlet (ID) 2" Outlet (OD) (Part No.53051)

Exhaust Pipe 2.125" Inlet (ID) 2" Outlet (OD)

from

$45.49
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
  • EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
  • OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
See More

Walker – Exhaust Pipe 2.25" Inlet (ID) 2.25" Outlet (OD) (Part No.53431)

Exhaust Pipe 2.25" Inlet (ID) 2.25" Outlet (OD)

from

$49.49
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
  • EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
  • OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
See More

Upgrade your 1998 Volkswagen Jetta with Top-Quality Exhaust Parts

When it comes to maintaining or upgrading your 1998 Volkswagen Jetta, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Volkswagen or enhancing its overall performance, Exhaust Parts are key to keeping your Jetta functioning at its best. At Advance Auto Parts, we offer a wide selection of 48 Exhaust Parts for the 1998 Volkswagen Jetta, designed to meet your needs without breaking the bank. From Exhaust Hanger replacements to Exhaust Mufflers upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Exhaust Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Exhaust Parts for your 1998 Volkswagen Jetta at great prices. Our Exhaust Parts inventory for this model ranges from just $1.99 to $450.99, with an average price of $72.17. Our 48 Exhaust Parts in stock come from 14 trusted brands, so you’re sure to find the right part for your 1998 Volkswagen Jetta without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1998 Volkswagen Jetta, we stock popular OEM and aftermarket Exhaust Parts from top names like Walker Flowtech, and more. Walker Exhaust Parts start at just $1.99 and boast an impressive 4 stars average rating from customers. With 556 customer reviews and counting, our 1998 Volkswagen Jetta Exhaust Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Exhaust Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1998 Volkswagen Jetta is always ready to roll. We’re committed to providing you with everything you need to keep your Jetta in top shape, all in one place. Start shopping confidently below for your 1998 Volkswagen Jetta!

Best-Selling Exhaust Hangers for 1998 Volkswagen Jettas

Enhance the driving experience in your Volkswagen with 5 quality Exhaust Hanger components, starting at $6.54.

Walker – Exhaust 35460 Exhaust System Hanger Insulator (Part No.35460)

Exhaust 35460 Exhaust System Hanger Insulator

from

$6.79
Complete your exhaust repair with Walker® insulators. Available in a variety of styles and sizes, they’re designed to work with Walker aftermarket replacement parts for quick and easy installation.

Product Features:
  • OE DESIGN — Designed with OE-style features for easy installation and fit
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

BRExhaust – Exhaust Hanger (Part No.255-047)

Exhaust Hanger

from

$8.29
BRExhaust exhaust insulator mounts are high-quality replacements for original equipment hangers¿designed to fit right the first time. They’re manufactured from premium rubber and available for a variety of car, truck, and van applications. BRExhaust exhaust insulator mounts will help keep your components in the right position, resulting in a longer lifespan for your exhaust system.

Product Features:
  • Designed to facilitate hassle-free exhaust repair
  • Precise fitment
  • Manufactured from quality materials to ensure maximum durability
  • OE-style design for quality fit
  • Secure sealing for superior durability
  • Manufactured from quality materials to ensure maximum durability
  • Reduced vibration
See More

BRExhaust – Exhaust Hanger (Part No.255-034)

Exhaust Hanger

from

$21.49
BRExhaust exhaust insulator mounts are high-quality replacements for original equipment hangers¿designed to fit right the first time. They’re manufactured from premium rubber and available for a variety of car, truck, and van applications. BRExhaust insulator mounts will help to keep your components in the right position, resulting in a longer lifespan for your exhaust system.

Product Features:
  • Exhaust accessory that enables a complete installation process
  • Precise fitment
  • Precise fitment
  • Manufactured according to strict OE standards
  • Reduced Vibration
See More

Febi – Exhaust Hanger (Part No.H805038580FEB)

Exhaust Hanger

from

$8.40
Exhaust Hanger

HJS – Exhaust Hanger (Part No.H8050946675HJS)

Exhaust Hanger

from

$6.54
Exhaust Hanger

Most Popular 1998 Volkswagen Jetta Exhaust Mufflers

Customize your Volkswagen with 4 Exhaust Mufflers products like Mufflers and Exhaust Muffler Washer, all priced under $227.99.

Walker – Quiet-Flow Direct Fit Exhaust Muffler Assembly 2" Inlet (OD) 2" Outlet (OD) (Part No.52171)

Quiet-Flow Direct Fit Exhaust Muffler Assembly 2" Inlet (OD) 2" Outlet (OD)

from

$211.99
Combining industry-leading coverage with a direct fit OE-style replacement, Walker Quiet-Flow muffler assemblies deliver a precision fit, superior flow and OE-style sound. Quiet-Flow muffler assemblies are available for domestic and foreign vehicles.

Product Features:
  • EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
  • RESISTS CORROSION — Internal drainage system helps reduce moisture collection
  • BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
  • DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
See More

Walker – SoundFX Muffler, Direct Replacement, No Fabrication Needed (Part No.18470)

SoundFX Muffler, Direct Replacement, No Fabrication Needed

from

$92.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.

Product Features:
  • RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
  • BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and/or welding
  • FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
  • GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
See More

Flowmaster Inc. – DBX Muffler, 2.25in Center Inlet 2.25in Center Outlet, 14in long, Non-Reversible, Moderate Sound (Part No.12414310)

DBX Muffler, 2.25in Center Inlet 2.25in Center Outlet, 14in long, Non-Reversible, Moderate Sound

from

$227.99
dBX series mufflers – this Laminar Flow internal configuration muffler features the revolutionary HP core design delivering excellent sound control for a wide variety of engine types where vehicle under-chassis space is limited. Utilizing cool shell technology to minimize radiant heat from the muffler body, they are perfect for sport compact imports as well as muscle cars and other performance applications. Constructed with 409S stainless steel internal components and wrapped with a proprietary insulation material and finally a polishable 304 stainless steel casing, these mufflers are as attractive as they are functional delivering a moderate to aggressive tone.
See More

BRExhaust – Exhaust Washer (Part No.258-117)

Exhaust Washer

from

$5.99
BRExhaust offers exhaust flange washers for use with their premium exhaust components. BRExhaust washers deliver the strength of steel, a proper fit and an easier install or repair. They’re available for fitment on a variety of year/make/model applications.

Product Features:
  • Designed to facilitate hassle-free exhaust repair
  • Precise fitment
  • Manufactured from quality materials to ensure maximum durability
  • Easy installation
See More

Top Picks for 1998 Volkswagen Jetta Exhaust Pipes

Upgrade Volkswagen Jettas with top-quality Exhaust Pipes parts, including 11 OEM and aftermarket selections for your 1998 model.

Walker – 3 Bolt Exhaust Pipe Flange Gasket: Graphite with Steel, Heat Resistant, Premium Materials (Part No.31611)

3 Bolt Exhaust Pipe Flange Gasket: Graphite with Steel, Heat Resistant, Premium Materials

from

$11.99
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they¿re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • HEAT RESISTANT — Designed to resist heat for long-lasting performance
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – Exhaust Pipe 2.125" Inlet (ID) 2" Outlet (OD) (Part No.53051)

Exhaust Pipe 2.125" Inlet (ID) 2" Outlet (OD)

from

$45.49
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
  • EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
  • OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
See More

Walker – Exhaust Pipe Flange Gasket (Part No.31559)

Exhaust Pipe Flange Gasket

from

$8.99
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they¿re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • HEAT RESISTANT — Designed to resist heat for long-lasting performance
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – Direct Fit Catalytic Converter: No Fabrication Needed, EPA Compliance (Part No.52075)

Direct Fit Catalytic Converter: No Fabrication Needed, EPA Compliance

from

$161.99
Walker Resonators And Welded Resonator Assemblies provide precise tuning technologies to ensure excellent flow characteristics And OE-style sound. They feature 100% aluminized construction for longer life, quality appearance And favorable acoustics. These are OE-style resonators that fit, perform And sound like the original system.

Product Features:
  • EASY TO INSTALL – Meticulous pipe routing and OE-style hardware, flanges, and brackets for fast, easy installation
  • RESISTS CORROSION – Durable aluminized steel construction and helps reduce corrosion
  • FACTORY SOUND – OE-style louvered tubes (where applicable) help reduce radiated noise for factory-style sound quality
  • STRONG AND DURABLE – Features thick OE-style flanges, hardware and brackets for strength
  • GET MORE MILES FROM YOUR RESONATOR ASSEMBLY – Engineered to fit, perform and sound like the original system
See More

BRExhaust – Exhaust Flange Gasket (Part No.256-395)

Exhaust Flange Gasket

from

$13.99
BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.

Product Features:
  • Designed to facilitate hassle-free exhaust repair
  • Precise fitment
  • Manufactured from quality materials to ensure maximum durability
  • Designed for a leak free connection
  • OE structure and design
  • Built to OEM specifications
  • Secure gas-tight connection
See More

BRExhaust – Exhaust Connection Clamp (Part No.265-687)

Exhaust Connection Clamp

from

$30.99
BRExhaust exhaust clamps are a great choice to install on your new BRExhaust exhaust. These clamps will provide the proper fit and function to finish your install. Each clamp is offered in a variety of shapes and sizes to deliver perfect, gas-tight performance for your project. A BRExhaust exhaust plus new exhaust clamps equals longer service life!

Product Features:
  • Stainless steel construction
  • Exhaust accessory that enables a complete installation process.
  • Designed to facilitate hassle-free exhaust repair
  • Precise fitment
  • Manufactured from quality materials to ensure maximum durability
See More

BRExhaust – Exhaust Flange Gasket (Part No.256-909)

Exhaust Flange Gasket

from

$19.79
BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.

Product Features:
  • Designed to facilitate hassle-free exhaust repair
  • Precise fitment
  • Manufactured from quality materials to ensure maximum durability
  • Designed for a leak free connection
  • OE structure and design
  • Built to OEM specifications
  • Secure gas-tight connection
See More

Victor Reinz – Exhaust Pipe Flange Gasket (Part No.71-15787-00)

Exhaust Pipe Flange Gasket

from

$16.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Victor Reinz – Exhaust Pipe Flange Gasket (Part No.71-27331-30)

Exhaust Pipe Flange Gasket

from

$15.79
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

HJS – Exhaust Gasket (Part No.H4000125941HJS)

Exhaust Gasket

from

$14.86
Exhaust Gasket

Victor Reinz – Exhaust Pipe Flange Gasket (Part No.71-28461-00)

Exhaust Pipe Flange Gasket

from

$11.79
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

In-Demand Exhaust Fittings for 1998 Volkswagen Jettas

Select from 9 premium Exhaust Fittings parts for your 1998 Volkswagen Jetta, with prices ranging from $1.99 to $29.87.

CRP – Exhaust Clamp (Part No.H8020570170CRP)

Exhaust Clamp

from

$29.87
Exhaust Clamp

BRExhaust – Exhaust Clamp (Part No.250-254)

Exhaust Clamp

from

$19.49
Sourcing mounting parts from the manufacturer that designs and makes the exhaust system is the only way to guarantee the perfect fit. That’s why, whilst developing the exhaust system, BRExhaust also develops the installation hardware to the same standards.

Product Features:
  • whilst developing the exhaust system
  • BRExhaust also develops the installation hardware to the same standards.
  • Manufactured from quality materials to ensure maximum durability
  • Proper fit and functionality to finish your install
  • Perfect, gas-tight performance
  • Exhaust accessory that facilitates a complete installation process.
  • Built to OEM specifications
See More

Rein – 50X95 Dual Clamp (Part No.EXC0022)

50X95 Dual Clamp

from

$18.99
Rein exhaust clamps are direct-fit OE replacements designed and manufactured to exact standards. Clamps come complete with bolts and hardware to ensure proper fit and function.

Product Features:
  • Rein exhaust clamps are designed as direct-fit replacements to ensure trouble-free proper installation.
  • Rein exhaust clamps come complete with bolts and hardware when necessary for installation to save installation time and additional costs.
  • Replace leaking, damaged or noisy exhaust clamps with Rein premium components to restore your vehicle to safe and optimal performance levels.
  • Replace worn-out exhaust clamps to prevent damage to costly catalytic converters and other exhaust components.
See More

BRExhaust – Exhaust Clamp (Part No.250-354)

Exhaust Clamp

from

$5.79
Sourcing mounting parts from the manufacturer that designs and makes the exhaust system is the only way to guarantee the perfect fit. That’s why, whilst developing the exhaust system, BRExhaust also develops the installation hardware to the same standards.

Product Features:
  • whilst developing the exhaust system
  • BRExhaust also develops the installation hardware to the same standards.
  • Manufactured from quality materials to ensure maximum durability
  • Proper fit and functionality to finish your install
  • Perfect, gas-tight performance
  • Exhaust accessory that facilitates a complete installation process.
  • Built to OEM specifications
See More

Walker – Clamp Band, Butt Joint Bolt Dia 0.4375 Length Nut Type Hex Pipe Dia 2.25 (Part No.33979)

Clamp Band, Butt Joint Bolt Dia 0.4375 Length Nut Type Hex Pipe Dia 2.25

from

$25.49
Complete your exhaust repair with the MEGA clamp. Designed to seal muffler inlets, outlets, elbow joints and pipe, the MEGA clamp is manufactured from durable and robust aluminized steel or T-304 stainless steel for long service life.

Product Features:
  • KEEPS EXHAUST PARTS IN PLACE — Designed to connect undercar exhaust components
  • SUPERIOR SEAL ┐ Lap joint clamps provides superior sealing in connecting ID to OD pipes, while butt joint clamps provide superior sealing in connecting OD to OD
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for your vehicle repair needs
  • BETTER TOGETHER — Use Walker accessories when installing mufflers and exhaust systems for a complete exhaust system upgrade
See More

BRExhaust – Exhaust Clamp (Part No.250-260)

Exhaust Clamp

from

$24.99
Sourcing mounting parts from the manufacturer that designs and makes the exhaust system is the only way to guarantee the perfect fit. That’s why, whilst developing the exhaust system, BRExhaust also develops the installation hardware to the same standards.

Product Features:
  • whilst developing the exhaust system
  • BRExhaust also develops the installation hardware to the same standards.
  • Manufactured from quality materials to ensure maximum durability
  • Proper fit and functionality to finish your install
  • Perfect, gas-tight performance
  • Exhaust accessory that facilitates a complete installation process.
  • Built to OEM specifications
See More

HJS – Exhaust Clamp (Part No.H802056162HJS)

Exhaust Clamp

from

$7.14
Exhaust Clamp

Walker – Exhaust Clamp (Part No.35336)

Exhaust Clamp

from

$2.49
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.

Product Features:
  • CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS?–?Made from quality material for durability and long life
  • BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – Exhaust Clamp (Part No.35335)

Exhaust Clamp

from

$1.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.

Product Features:
  • CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS?–?Made from quality material for durability and long life
  • BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
See More

Most Sold 1998 Volkswagen Jetta Exhaust Manifold and Headers

Explore our best-selling Volkswagen parts for the 1998 Jetta among 1 OEM and aftermarket options starting from $2.21.

Meyle – Exhaust Stud (Part No.H100525458MEY)

Exhaust Stud

from

$2.21
Exhaust Stud

Top-Rated Exhaust Parts Brands For Your 1998 Volkswagen Jetta

Shop for the best-rated brands offering Exhaust Parts and other products for your 1998 Volkswagen Jettas. Below you’ll find some of our best rated Exhaust Parts from Walker and Flowtech, and more. Exhaust Parts from these brands that fit a 1998 Jetta start at just $1.99 and are rated as high as 4 stars. OEM and aftermarket Exhaust Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Walker 1998 Volkswagen Jetta Exhaust Parts

When it comes to maintaining or upgrading your 1998 Volkswagen Jetta, using quality Exhaust Parts is essential to ensure durability and a perfect fit. Walker ticks all of those boxes. We offer a wide selection of Walker Exhaust Parts, specifically designed for the 1998 Volkswagen Jetta. With over 12 Walker brand Exhaust Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $1.99, with an average price of just $71.27. Plus, with over 69 customer reviews and an average rating of 4 stars, you can trust that our Walker Exhaust Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Direct Fit Catalytic Converter: No Fabrication Needed, EPA Compliance
from
$161.99
This product is not rated

Direct Fit Catalytic Converter: No Fabrication Needed, EPA Compliance

“”

Popular Flowtech 1998 Volkswagen Jetta Exhaust Parts

Flowtech auto parts is one of the highest quality Exhaust Part brands in the market. Any 1998 Volkswagen Jetta owner should feel confident when installing genuine Flowtech parts in their vehicle. To ensure the best fit and performance for your 1998 Jetta, Advance Auto Parts carries a full inventory of 1 Flowtech Exhaust Parts. Plus you will be keeping your Volkswagen in peak condition while saving money because prices on these Flowtech Exhaust Parts range up to $85.99, plus, with more than 5 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Exhaust Parts below will deliver on both quality and value.

Terminator; Exhaust Tips
from
$85.99

(5)

Terminator; Exhaust Tips

“very nice…worth the money.”

FAQs for 1998 Volkswagen Jetta Exhaust Parts

Which Exhaust Parts are best-sellers for 1998 Volkswagen Jettas?

Out of 48 Exhaust Parts that fit 1998 Volkswagen Jettas, the following parts are the top sellers:

What’s the price range for 1998 Volkswagen Jetta Exhaust Parts?

Exhaust Part prices for the 1998 Volkswagen Jetta start at $1.99 and go up to $450.99 for the most premium parts.

What’s the average price of a Exhaust Part for a 1998 Volkswagen Jetta?

The average price for Exhaust Parts for the 1998 Volkswagen Jetta is $72.17. Keep in mind the variety of part types within our Exhaust Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Exhaust Parts for other Volkswagen Jetta model years?

Yes, we currently carry Exhaust Parts for 44 model years of Volkswagen Jettas between 1980 and 2024. Exhaust Parts are bought most frequently for the following model years: 2023, 2022, 2024, 2021, 2020, 2019, 2018, 2017, and 2016.

What are the cheapest Exhaust Parts for my 1998 Volkswagen Jetta?

The cheapest 1998 Volkswagen Jetta Exhaust Parts we carry in stock are:

What are the top-rated Exhaust Parts that fit the 1998 Volkswagen Jetta?

Out of 556 reviews by customers, our 1998 Volkswagen Jetta Exhaust Parts have an average customer rating of . These are some of the highest-rated Exhaust Part types for the 1998 Volkswagen Jetta and their top-rated products:

What types of Exhaust Parts do you sell for my 1998 Volkswagen Jetta?

Can I get help with 1998 Volkswagen Jetta Exhaust Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Volkswagen Exhaust Parts and more.

What is your return policy for Volkswagen Jetta Exhaust Parts?

Advance Auto Parts keeps returns simple. For new Volkswagen Jetta Exhaust Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.