1998 Volkswagen Beetle Wheels and Tires
More 1998 Volkswagen Beetle Wheels and Tires Categories
If you’re looking for an original Wheels and Tires replacement for a 1998 Volkswagen Beetle, you can search through our selection below. You’ll also find aftermarket and OEM Wheels and Tires to meet your needs.
Essential 1998 Volkswagen Beetle Wheels and Tires
Autel – Adjustable Angle 1-Sensor Rubber (Part No.300020)
from
$41.99
The Adjustable Angle 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber screw-in valve stems. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.
Product Features:
See More
Product Features:
- Maximum Signal Strength, Battery Reliability.
- 15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
- Combined Frequency – 315MHz and 433MHz
- Programmable with Autel TPMS Service Tools
- Program to Replace 99 Percent of OE Sensors
- Meets SAE Standards J1205 and J1206
- Maximum Signal Strength, Battery Reliability
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Huf North America – Programable IntelliSens TPMS with Bartec and ATEQ Program tools; 315MHz (Part No.UVS3041)
from
$47.99
BHsens (Huf) is an OE supplier that provides original replacement sensors in OE quality to the aftermarket for a multitude of vehicles. Huf has also developed the universal sensor IntelliSens UVS of equivalent quality, especially for repair shops, which cover nearly all vehicle models. While developing any products, Huf’s intention is to make it quick and easy for the installers to use. Huf Tire Pressure Sensors have the best coverage, fastest configuration process, and quickest and easiest assembly process in the market while maintaining the OE quality.
Product Features:
See More
Product Features:
- 315 MHz TPMS Universal with rubber valve
- Programmable – Only take 3 seconds to configure to specific application
- Always up-to-date with the new programming function via the TPMS diagnostic tool
- Covers multiple applications with one OE equivalent sensor
- Reprogrammable and Copy Clone Capable
- Have WAL technology for locating tire positon
- Supported by Bartec, ATEQ, Snap On, NAPA, Matco and Corghi TPMS Diagnostic tools
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
NTN – BCA Wheel Bearing (Part No.K800027802NTN)
from
$20.25
Application-Specific Engineering Design to ensure the correct fit, function and high performance of the wheel bearing. BCA supplies premium replacement bearings that meet or exceed the OE specifications. Premium Quality Materials are used for forged steel rings, seals, precision cages, rolling elements and premium grease, to ensure that our customers receive a robust, durable product. Seals are customized for each BCA hub based on application-specific materials and design requirements to minimize the chance of contamination and maximize bearing life. Precision Cage on BCA bearings are designed to keep the rolling elements of the bearing spaced correctly. The cages undergo design verification and production validation testing to ensure high quality. Pre-Lubrication of all BCA wheel bearings with premium grease for your convenience. This is a major advantage so you do not have to worry about grease or seal application.
Product Features:
See More
Product Features:
- For wheel bearings, BCA utilizes Forged Steel in the inner and outer rings that meets our stringent steel quality specifications to optimize bearing life.
- For taper bearings, BCA utilizes Case Carburized Steel for heavy duty shock loads and longer life.
Driveworks – Hub & Bearing Assembly (Part No.NT512319)
from
$150.99
Driveworks hub bearing assembly is designed to meet or exceed original equipment (OE) standards in form, fit and function. The hub bearing assembly is designed to support the vehicle’s weight and reduce resistance so that your wheels maintain contact with the road under any condition. Easy installation, comfortable handling and quiet performance are just a few of the benefits you will find with the installation of Drivework’s hub bearing assembly. The hub bearing comes complete with wheel studs, hub and bearings. Also, includes ABS Wheel Sensors where applicable.
Product Features:
See More
Product Features:
- Constructed from high-quality materials for extended durability
- Integral raceway provides proper clearance between the ball and bearing riding surfaces
- Ensures proper function and quiet operation
- Precision-matched components deliver smooth and quiet operation
- Manufactured to strict engineering quality standards
- Brand may vary by location
McGard – Chrome Bolt Style Radius Seat Lock Bolt Set (M14 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.28018)
from
$59.99
Protecting the world’s finest wheels and tires from theft since 1964. Wheel Lock Bolts are designed in the USA and manufactured in the EU and USA. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use wheel locks function like regular lug bolts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- The bolt stem has a dacromet coating to meet O.E.M. standards.
- For use with steel or aluminum wheels with a ball-shaped seat.
McGard – Black Bolt Style Radius Seat Lock Set (M14 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.28318)
from
$84.99
Protecting the world’s finest wheels and tires from theft since 1964. Wheel Lock Bolts are designed in the USA and manufactured in the EU and USA. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use wheel locks function like regular lug bolts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- The bolt stem has a dacromet coating to meet O.E.M. standards.
- For use with steel or aluminum wheels with a ball-shaped seat.
Dorman – Wheel Bolt: M14-1.50 Thread Size, Ball Seat Style, 19 mm Hex Size, Silver, 1 Pack (Part No.610-250.1)
from
$8.99
This replacement wheel lug bolt matches the original equipment hard wear dimensions for a reliable fit. Made of quality materials to ensure safe installation of the wheel under all conditions.
Product Features:
See More
Product Features:
- Ideal replacement – this wheel lug bolt is a direct replacement for the original hardware
- Durable construction – made of quality materials for safe, reliable service
- Cost-effective solution – offers original equipment quality at a competitive price
- Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life
Dorman – M14-1.50 Wheel Bolt – 17mm Hex, 26mm Thread Length (Part No.610-318)
from
$3.49
This replacement wheel lug bolt matches the original equipment hard wear dimensions for a reliable fit. Made of quality materials to ensure safe installation of the wheel under all conditions.
Product Features:
See More
Product Features:
- Ideal replacement – this wheel lug bolt is a direct replacement for the original hardware
- Durable construction – made of quality materials for safe, reliable service
- Cost-effective solution – offers original equipment quality at a competitive price
- Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life
Dorman – Wheel Lug Nut Cover: Push Type, 21 mm Depth, Plastic, Black, 1 Pack (Part No.611-644.1)
from
$1.49
This wheel fastener cover is designed to precisely fit the factory wheel hardware while providing a clean, finished appearance. Made of quality materials for durability, this cover has been dimensionally validated for specific applications.
Product Features:
See More
Product Features:
- Correct fit – this wheel fastener cover is designed to precisely fit the factory wheel hardware while providing a clean, finished appearance
- Quality materials – manufactured for durability and a quality finish
- Simple installation – no special tools required
- Quality tested – this part has undergone dimensional testing to ensure a quality fit
Dorman – Wheel Lug Nut Cover: Push Type, 21 mm Depth, Plastic, Black (Sold by each) (Part No.611-644)
from
$2.79
This wheel fastener cover is designed to precisely fit the factory wheel hardware while providing a clean, finished appearance. Made of quality materials for durability, this cover has been dimensionally validated for specific applications.
Product Features:
See More
Product Features:
- Correct fit – this wheel fastener cover is designed to precisely fit the factory wheel hardware while providing a clean, finished appearance
- Quality materials – manufactured for durability and a quality finish
- Simple installation – no special tools required
- Quality tested – this part has undergone dimensional testing to ensure a quality fit
REDI-Sensor – VDO Metal Clamp-in Stem REDI-Sensor (Part No.SE10003A)
from
$56.99
REDI-Sensor sensors offer maximum application coverage, ease of use, and OE validation for fit, performance and reliability. REDI-Sensor replaces a host of OE sensors, including banded, snap-in and clamp-in type sensors. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Then, now, and into the future we will be there for you, our customer.
Product Features:
See More
Product Features:
- Installs right out of the box
- No sensor programing required
- Works with all major TPMS scan tools
- No training required – designed to follow existing OE vehicle relearn procedures
- Faster TPMS scan tool hunt mode
- Reduces SKUs
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Autel – 1 Boxed MX-Sensor 1-Sensor Press-in Aluminum Valve Stem (Part No.1-SENSORM)
from
$44.49
The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with aluminum valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 & J1206. Replacement valve stems are available for purchase in rubber or metal.
Product Features:
See More
Product Features:
- Combined Frequency: 315MHz and 433MHz
- Programmable with Autel TPMS Service Tools
- Exclusive Press Release Button to Easily Replace Valve Stems
- Program to Replace 99% of OE Sensors
- Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
- Meets SAE Standards J1205 & J1206
- Maximum Signal Strength / Battery Reliability
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Autel – MX-Sensor 1-SensorM Bulk Box (20) (Part No.300060)
from
$525.99
Product Features:
See More
- Bulk Box of (20) Individually Bagged 1-Sensors with Metal Press-in Valve
- Combined Frequency: 315MHz & 433MHz
- Programmable with Autel TPMS Service Tools
- Exclusive Press Release Button to Easily Replace Valve Stems
- Program to Replace 99% of OE Sensors
- Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
- Meets SAE Standards J1205 & J1206
- Maximum Signal Strength / Battery Reliability
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Driveworks – Wheel Hub (Part No.930-800)
from
$46.49
DRIVEWORKS Wheel Hubs are designed to support the vehicle’s weight and reduce resistance so that your wheels maintain contact with the road under any condition. These wheel hubs are set to the appropriate tolerances to ensure smooth rotation, maximum longevity, and wear resistance. Easy installation, comfortable handling and quiet performance are just a few of the benefits you will find with the installation of DRIVEWORKS Wheel Hubs.
Product Features:
See More
Product Features:
- Constructed from quality materials for extended durability
- Precision-matched components deliver smooth and quiet operation
- Manufactured to strict engineering quality standards
- Brand may vary by location
NTN – BCA Wheel Bearing (Part No.K8000183248NTN)
from
$15.34
Application-Specific Engineering Design to ensure the correct fit, function and high performance of the wheel bearing. BCA supplies premium replacement bearings that meet or exceed the OE specifications. Premium Quality Materials are used for forged steel rings, seals, precision cages, rolling elements and premium grease, to ensure that our customers receive a robust, durable product. Seals are customized for each BCA hub based on application-specific materials and design requirements to minimize the chance of contamination and maximize bearing life. Precision Cage on BCA bearings are designed to keep the rolling elements of the bearing spaced correctly. The cages undergo design verification and production validation testing to ensure high quality. Pre-Lubrication of all BCA wheel bearings with premium grease for your convenience. This is a major advantage so you do not have to worry about grease or seal application.
Product Features:
See More
Product Features:
- For wheel bearings, BCA utilizes Forged Steel in the inner and outer rings that meets our stringent steel quality specifications to optimize bearing life.
- For taper bearings, BCA utilizes Case Carburized Steel for heavy duty shock loads and longer life.
Driveworks – Taper Bearing Cone (Part No.S-LM-300849)
from
$17.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
FAG US – HUB ASSEMBLY (Part No.WB61002K)
from
$39.99
HUB ASSEMBLY
MOOG Hub Assemblies – Suspension Knuckle Assembly (Part No.LK007)
from
$399.99
Backed by superior materials and rigorous testing, MOOG complete knuckle assemblies deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- COMPLETE SOLUTION — Pre-assembled for convenience and includes premium parts like a MOOG knuckle, MOOG wheel hub with studs, bearing, axle nut, backing plate and premium ball joint (where applicable) for a complete solution
- EASY TO INSTALL — Innovative bolt-on, pre-assembled solution designed to make troublesome bearing replacement easier and eliminate the need for special tools or a press
- CORROSION PROTECTION — e-Coated backing plate and knuckle provides long-lasting corrosion resistance
- STRONG AND DURABLE — Engineered with high-quality materials to provide long life and dependability
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Dorman – Wheel Bearing Retaining Ring (Part No.933-801)
from
$11.79
This wheel bearing retaining ring is designed to match the fit and function of the original ring on specified applications, and is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this wheel bearing retaining ring is designed to match the fit and function of the original ring on specified applications
- Restores functionality – this retaining ring is made to fit and fully restore part functionality after the original ring fails
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
COAST TO COAST – 16 Inch, 8 Spoke, Silver, Plastic, Set Of 4, Spring Steel Clip (Part No.IWC18016S)
from
$77.99
Coast to Coast International Wheel Covers are a quick and cost effective alternative to replacing factory OEM wheel covers that have been lost, stolen or worn over time. With a wide variety of designs and finishes, it is easy to find a style that is right for any vehicle. All Coast to Coast International products feature a limited lifetime warranty.
Product Features:
See More
Product Features:
- Designed And Manufactured To Fit Steel Wheels And Emulate OEM Designs
- Constructed From High-Quality, Durable, Automotive Grade ABS
- Two Layers Of Clear Coat Enhance And UV Protect The Finish
- A Cost Effective Alternative To Replace OEM Wheel Covers That Have Been Lost, Stolen Or Worn Over Time
- Installs In Minutes Without Tools
- Spring steel clip retention, Easier to install, better wheel retention
Popular 1998 Volkswagen Beetle Wheels and Tires Categories
1998 Volkswagen Beetle Wheels and Tires
You count on your 1998 Volkswagen Beetle to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Wheels and Tires. With 30 Wheels and Tires ranging in price from $1.49 to $399.99, you’re sure to find everything you need for your 1998 Volkswagen Beetle.
Brands matter. If you want to shop a specific Wheels and Tires brand, we stock 12 different brands like Schrader, Dorman, and DriveWorks. 1998 Volkswagen Beetle Wheels and Tires start as low as $1.49!
One of the best ways to find top quality OEM or aftermarket Wheels and Tires is by asking professionals. Short of that, you can shop with confidence thanks to our 262 extensive product reviews on 1998 Volkswagen Beetle Wheels and Tires. Some of the top-rated Wheels and Tires products we carry are Wheel Bearing: Direct Fit, 1 Piece with 3.9 stars and Wheel Hub Assembly with 4.0 stars.
Did we mention you can order your Wheels and Tires from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Wheels and Tires inventory for your 1998 Volkswagen Beetle below to get started!
Top-Rated Wheels and Tires Brands For Your 1998 Volkswagen Beetle
Trusted Wheels and Tires OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1998 Volkswagen Beetle running right for years to come. In our inventory you’ll find brands like Schrader, Dorman, DriveWorks, and even more.
Popular Dorman – Pik-a-Nut Wheels and Tires
You’ll find popular Dorman – Pik-a-Nut brand products across Wheel Hardware and Wheel Spacers. All are waiting to get your 1998 Volkswagen Beetle back on the road. Some of the top-rated Dorman – Pik-a-Nut products in these categories are:
from
$4.29
(4)
Wheel Bolt: M14-1.50 Thread Size, Ball Seat Style, 17 mm Hex Size, Black, 1 Pack
Wheel Bolts
Top-Rated Wheels and Tires
If are what you’re looking for, our inventory holds plenty. We stock brand Wheels and Tires for your 1998 Volkswagen Beetle, and some of our most reviewed parts include:
from
$41.99
(69)
Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece
Tire Pressure Sensors
FAQs for 1998 Volkswagen Beetle Wheels and Tires
What are the most purchased Wheels and Tires for the 1998 Volkswagen Beetle?
Out of 30 Wheels and Tires for the 1998 Volkswagen Beetle, the most popular in our inventory are:
from
$51.99
This product is not rated
Programmable Tire Pressure Sensor (TPMS): Adj. Angle Clamp-In Alum Valve, 1 Pc
Tire Pressure Sensors
What are the top-rated 1998 Volkswagen Beetle Wheels and Tires?
Top-rated Wheels and Tires for your 1998 Volkswagen Beetle based on customer reviews/ratings are:
from
$71.99
(13)
Wheel Bearing: Direct Fit, 1 Piece
“These bearings are not the easiest to replace. It is important how the bearing is supported when pressing in the hub and tightening the cv shaft nut t”
