1998 Toyota Tacoma Air Suspension and Kits

Valvoline Multi-Vehicle Transfer Case Fluid is a full synthetic product meeting the performance needs for transfer cases recommending Ford XL-12 and GM Auto Trak II specifications or ATF fluids (DEX/MERC, ATF +4, etc).

Product Features:

• Recommended for use in most Ford, GM and FCA (Dodge, Jeep) models
• Formulated to help prevent gear wear and protect against rust and corrosion
• Formulated to deliver enhanced protection against deposits
• Helps provide better protection during extreme operating conditions

Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:

• Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
• Enhanced anti-shudder protection for smooth shifting and maximum power transfer
• Developed with anti-wear technology to help improve transmission durability
• Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

Firestone heavy duty Ride Rite air helper springs are the workhorse of our air helper spring line. The double convoluted air springs offer maximum load support as well as years of worry free service. Ride Rite air helper springs can be installed on most light trucks, motor homes, RVs, SUVs and vans. Ride Rite air helper springs are installed between the frame of the vehicle and the suspension, providing load support through the use of air pressure. Firestone is committed to providing the customer with premium air helper spring kits. Ride Rite air helper springs have become synonymous with quality, durability, and customer support. Each application is specifically designed to maximize the safe load carrying capacity, stability, and ride quality of the vehicle. Ride Rite air helper springs utilize a pair of convoluted air springs which can be adjusted for changing loads. These air springs are capable of 3200 to 5000 Pounds of load leveling capacity. Ride Rite air helper springs enhance the ride by reducing inter leaf friction. Please remember that air springs do not increase the Load Carrying capacity of your vehicle. Ride Rite kits are application specific and are designed for hassle free fitment to the OEM suspension.

Product Features:

• Keep The Vehicle Level Improves Steering Control And Braking Effectiveness, Levels Headlight Beams And Reduces Tire Wear
• Level Off Center Loads, Individual Inflation Valves Allow For Adjustment Side To Side
• Reduce Suspension Fatigue Keeps Leaf Springs From Permanent Sagging Under Repeated Or Constant Load
• Reduce Bottoming Out Protective Air Cushion Softens Contact Between The Axle And Frame
• Increase Vehicle Stability, Absorbs Road Shock, Providing Ideal Ride Conditions For Passengers And Load
• Limited Lifetime Warranty

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Timbren suspension enhancement system – The decision is easy, Timbren suspension kits (SES kits) are designed to enhance the suspension of your vehicle. Improve load handling haul heavy loads with ease eliminate sag and sway.

Product Features:

• Eliminate Suspension Sag: When Towing A Heavy Trailer, Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
• Control Trailer Sway, A Condition Which Occurs With Unbalanced Loads, In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
• Control Body Roll, During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
• Improve The Ride, By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesnt Have To Mean Poor Ride Quality
• Economical And Trouble Free
• Simple And Easy To Install

Timbren suspension enhancement system The decision is easy, Timbren suspension kits (SES kits) are designed to enhance the suspension of your vehicle. Improve load handling haul heavy loads with ease eliminate sag and sway.

Product Features:

• Eliminate Suspension Sag: When Towing A Heavy Trailer, Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
• Control Trailer Sway: A Condition Which Occurs With Unbalanced Loads, In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
• Control Body Roll: During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
• Improve The Ride: By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesn’t Have To Mean Poor Ride Quality
• Economical And Trouble Free
• Simple And Easy To Install

Ride Rite(TM) air helper springs mount between the frame and the suspension of light trucks, vans, and motor homes. The heavy duty convoluted air springs will handle all leveling needs with load carrying capacities between 3200 to 5000 Pounds per set.

Product Features:

• Level The Vehicle Front-To-Rear And Side-To-Side
• Adjustability 5 To 100 PSI
• Stabilize The Vehicle While Loaded
• Maximize Vehicles Load Carrying Capacity
• Everything Is Included For A Quick, Easy Installation. Brackets, Air Springs, Hardware, Air Line, And Separate Valves For Manual Inflation

Daystar Comfort Ride Suspension systems are truly Driven by Design. Comfort Ride kits are specially designed to work with stock suspension components to keep costs down and quality high. High-density Progressive Polyurethane strut and spring spacers act as isolators to combine moderate amounts of lift without losing the comfortable ride you have come to expect. In torsion bar applications, re-indexed torsion keys allow you to dial-in the desired amount of lift in order to plus-size tire and wheel packages. These front lifts are often combined with Daystar Greaseable Super Shackles, add-a-leafs, or blocks and u-bolts to provide complete front and rear kits. Daystar offers a the most complete line of kits for most of the popular vehicles, including virtually all late-model domestic and import applications Almost all of the lift and leveling kits used on strut applications feature an easy-install design, no disassembly of the strut is required Comfort Ride Kits are the perfect start to achieving that custom look without compromising performance, reliability, or affordability.

Product Features:

• No Metal-On-Metal Contact, Daystar Uses Polyurethane Material In Its Leveling Kits For A Reason, It is An Insulator, Absorbs The Noise, Vibration And Harmonics (NVH) That Come From The Suspension
• Maintains Factory Ride Quality, Daystar Products Work With The Factory Springs With No Preloading Involved, So Vehicle Will Ride Just Like It Did Off The Showroom Floor
• Long Lasting Finish, Polyurethane Is Resistant To The Elements, Road Grime And All Automotive Chemicals, So Comfort Ride Kits Will Look Just Like They Came Out Of The Box For Years To Come
• Top Mount Easy Install Design

TrailFX has produced a line of leveling and rear block kits that are engineered to provide consumers with the very best in quality performance at an attractive price point. TrailFX suspension products allow you to level your vehicle or raise it for additional tire clearance, all while maintaining your factory ride.

Product Features:

• Fastest, Safest, Least Expensive Way To Bring The Front Of Your Vehicle Level With The Rear
• Strut Extension Will Maintain A Smooth OEM Ride Without Adding Pressure To Stock Suspension Components
• Toughest Finish. Safest Way To Level Lift
• Smart Strut Technology Mounts On Top Of The Strut Assembly, Eliminating The Hassle, Time And Danger Of Compressing Springs
• Installation Is Simple And Requires No Strut Preloading, Cutting, Or Modification Of Factory Installed Parts

Quick Strut Kit

Quick Strut Kit

The Air Command Standard Duty Dual Electric Air Compressor System Kit Allows You To Adjust Your Air Springs With The Touch Of A Button. It Offers A Built in Air Source For Your Suspension System, Making It Easy To Alter Your Springs To Align With The Load Type And Environment. When Shopping For Air Accessories, You will Find That Firestone Air Command Standard Duty Dual Electric Air Compressor System Kit Is Designed To Have A Couple Of Special Benefits. First, The Air Command Standard Duty Dual Electric Air Compressor System Kit Comes Ready To Install, So You Can Set It Up And Get Back To The Road where You Want To Be. Just Connect A Few Wires To The Compressor And A Few To Your Vehicle. The Air Lines And Wiring Harness Can Be Plugged Into The Same Side Of The Unit For Smoother Routing Of Lines And Power Supply. After The Air Command Standard Duty Dual Electric Air Compressor System Kit Is Properly Installed, You Can Make Pressure Adjustments By Pressing A Single Button. This Air Command Standard Duty Dual Electric Air Compressor System Kit Component Allows For Side To Side Or Front to rear Leveling, Real time Pressure Readout, And Dual Left And Right PSI And Pressure Control Readouts. The Air Command Standard Duty Dual Electric Air Compressor System Kit Easy to read Needle Gauge Can Be Viewed Day Or Night, Without Straining Or Squinting Your Eyes. Prior To Installing The Air Command Standard Duty Dual Electric Air Compressor System Kit, Review The Instructions And Identify All Of The Components To Help Make Sure You Get Maximum Performance From Both Your Air Springs And Air Command Standard Duty Dual Electric Air Compressor System Kit. The Installation Steps Are Different Depending On Whether You are Enhancing An Existing Air Helper Spring System With The Air Command Standard Duty Dual Electric Air Compressor System Kit Or Installing It With A New Air Spring System.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
• Light Duty Compressor Specs (120 PSI Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

While your car, truck, or SUV depends on Firestone Ride-Rite (TM) air springs to deliver in-cabin comfort, confidence, and control, you turn to Firestone Air Command (TM) products to take your experience to the next level. You count on air accessories like the Air Command Heavy-Duty Air Compressor System with Single Analog Gauge. The Air Command Heavy-Duty Air Compressor System with Single Analog Gauge makes inflating or deflating your air springs easy with the touch of a button. It provides an on-the-spot air source to your vehicle suspension system, letting you modify your springs to match the load and driving conditions. Firestone Air Command Heavy-Duty Air Compressor System with Single Analog Gauge, in particular, features a handful of distinct advantages. The Air Command Heavy-Duty Air Compressor System with Single Analog Gauge’s easy installation is chief among them, so you can get it hooked up and hop on the road in no time. Connect one wire to the compressor and three to the vehicle. The wiring harness and air lines can be plugged into the same side of the unit for uncluttered routing of power supply and lines.

Product Features:

• Designed To Provide Inflation Control Of Your Air Helper Springs
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Single Point Fill (Both Air Springs Fill To The Same Pressure)
• Heavy-Duty Compressor Specs (150 Pounds Per Square Inch Max Air Pressure, 30 Percent Duty Cycle, 0.40 CFM)

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)

While your vehicle trusts Firestone Ride-Rite (TM) air helper springs to deliver on-the-road control, confidence, and comfort, you trust Firestone Air Command (TM) products to take your experience to the next level. You look to air accessories like the Xtreme Air Cmd-S Compressor System. With the Xtreme Air Cmd-S Compressor System, you can easily modify your air spring inflation by pressing a button. It equips your vehicle suspension system with an instant air source, making it easy to modify your springs to fit the road conditions and load type. You’ll find that the Firestone Xtreme Air Cmd-S Compressor System features some very user-friendly advantages. Unpackage the Xtreme Air Cmd-S Compressor System and enjoy an easy installation, so you can get it set up and be back on the move. Connect one wire to the compressor and three to the vehicle. The wiring harness and air lines can be plugged into the same side of the unit for cleaner routing of power supply and lines.

Product Features:

• Controls Two Air Springs Simultaneously
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Single Point Fill (Both Air Springs Fill To The Same Pressure)
• Extreme Duty Compressor Specs (150 Pounds Per Square Inch Max Air Pressure, 100 Percent Duty Cycle, 0.94 CFM)

Our Air Command systems give customers the ability to conveniently adjust their air springs with the touch of a button thanks to our Air Command Air Compressor Kits. Our designs provide an instant air source to a vehicle air suspension system, giving users the freedom to adjust their air springs to accommodate different loads and road conditions from both inside and outside of the vehicle.

Product Features:

• The Easy To Read Digital Display Is Designed So You Can See It During The Day, But It Does Not Blind You At Night
• The Wireless Remote Utilizes A New Sleep Cycle And LED Display That Reduces Energy Use And Improves Battery Life
• Easy Installation

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)

aFe Control introduces these Sway-A-Way High Performance replacement shock absorbers for the 2005-2020 Toyota Tacoma.. These 2.0″ diameter shocks feature all the same race winning engineering and components that have 20+ years of testing into a specifically designed kit that will bolt directly into your daily driven vehicle. This kit offers adjustable ride height and better off road damping curves without sacrificing any on road comfort or handling. These rear shocks are 100% designed and built in the USA that feature bright zinc plated steel cylinder bodies and CNC machined aluminum components. This package is designed as a direct fit application and requires no modifications to the vehicle.

Product Features:

• CNC Machined Components Made To The Strictest Tolerances
• Polished Nitro Steel Shaft for Strength And Durability
• Teflon Lined Steel Spherical Bearings
• Multi-Seal Carrier To Ensure Zero Leakage

Shock Kit

Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:

• PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
• REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
• REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
• RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
• EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:

• PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
• REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
• REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
• RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
• EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily