1998 Subaru Legacy Sway Bars

Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

• PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
• EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
• HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
• RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
• COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
• Inner sleeve is phosphate coated for corrosion protection

The kit utilises a high tensile extruded alloy link fitted with ultra low compliance synthetic elastomer bushings. Critical hardware is replaced with high tensile components to match the higher loads. The result is much more precise and direct roll control with up to 25% more effective bar rate available at lower wheel deflection points. This does NOT mean an outright increase in your bar rate but rather a quickening of its effect allowing more bar rate earlier. Link shape and bush mounts are designed to allow maximum sway bar articulation to ensure full suspension travel while acting more directly under vertical load. Standard length maintains correct sway bar operation.

Product Features:

• By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
• Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
• Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.

The kit utilises a high tensile extruded alloy link fitted with ultra low compliance synthetic elastomer bushings. Critical hardware is replaced with high tensile components to match the higher loads. The result is much more precise and direct roll control with up to 25% more effective bar rate available at lower wheel deflection points. This does NOT mean an outright increase in your bar rate but rather a quickening of its effect allowing more bar rate earlier. Link shape and bush mounts are designed to allow maximum sway bar articulation to ensure full suspension travel while acting more directly under vertical load. Standard length maintains correct sway bar operation.

Product Features:

• By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
• Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
• Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.

Worn or deteriorated link bushings although small can have considerable influence over sway bar performance and more notably vehicle handling behaviour. Whiteline bushings are engineered to last and deliver improved driving performance.

Product Features:

• Internal grease reservoirs provide continual self lubrication for optimum friction management.
• Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
• Internal grease reservoirs provide continual self lubrication for optimum friction management.

Worn or deteriorated link bushings although small can have considerable influence over sway bar performance and more notably vehicle handling behaviour. Whiteline bushings are engineered to last and deliver improved driving performance.

Product Features:

• Internal grease reservoirs provide continual self lubrication for optimum friction management.
• Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
• Internal grease reservoirs provide continual self lubrication for optimum friction management.

Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:

• Gas shielded welding reinforcement ensure the safety of driving under poor road conditions
• Wrench flats at the base of the stud allow for the use of sockets for easy installation

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• Improves upon OE designs
• Quiet, dependable operation
• Provides like-new steering, ease of installation and longer life
• Incorporates proven design and engineering features
• Incorporates proven design and engineering features

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• Improves upon OE designs
• Quiet, dependable operation
• Provides like-new steering, ease of installation and longer life
• Incorporates proven design and engineering features
• Incorporates proven design and engineering features

Not many enthusiasts are aware that OEM and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.

Product Features:

• By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
• Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
• Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.

Not many enthusiasts are aware that OEM and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.

Product Features:

• Articulation voids deliver necessary suspension articulation and/or compression under loads.
• Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.
• Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Rubber or Thermoplastic material
• No Squeak
• Restores vehicle handling
• Improves body roll

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Rubber or Thermoplastic material
• No Squeak
• Restores vehicle handling
• Improves body roll

Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 22mm 2 point adjustable sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.

Product Features:

• DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
• Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
• DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.

Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 22mm 3 point adjustable sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.

Product Features:

• DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
• Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
• DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.

Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 20mm fixed position sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.

Product Features:

• DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
• DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
• Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.

Whiteline heavy duty rear sway bar mounting saddle kits are designed to replace the original equipment mounts with a stronger more rigid forged alloy version. This Whiteline kit improves sway bar response and should be used for large diameter or adjustable sway bars especially when running the stiffer sway bar settings as factory mounts will twist/ flex and potentially fail prematurely.

Product Features:

• Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
• Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
• Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.

Whiteline heavy duty rear sway bar mounting saddle kits are designed to replace the original equipment mounts with a stronger more rigid forged alloy version. This Whiteline kit improves sway bar response and should be used for large diameter or adjustable sway bars especially when running the stiffer sway bar settings as factory mounts will twist/ flex and potentially fail prematurely.

Product Features:

• Install guide included providing detailed instructions on how to install your new Whiteline purchase.
• Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
• PTFE lining provides an extraordinary low coefficient of friction eliminating the need to lubricate the bushing.

Whiteline heavy duty rear sway bar mounting saddle kits are designed to replace the original equipment mounts with a stronger more rigid forged alloy version. This Whiteline kit improves sway bar response and should be used for large diameter or adjustable sway bars especially when running the stiffer sway bar settings as factory mounts will twist/ flex and potentially fail prematurely.

Product Features:

• Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
• Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
• Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.

Whiteline heavy duty rear sway bar mounting saddle kits are designed to replace the original equipment mounts with a stronger more rigid forged alloy version. This Whiteline kit improves sway bar response and should be used for large diameter or adjustable sway bars especially when running the stiffer sway bar settings as factory mounts will twist/ flex and potentially fail prematurely.

Product Features:

• Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
• Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
• Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Rubber or Thermoplastic material
• No Squeak
• Restores vehicle handling
• Improves body roll

Designed to fit a 19mm sway bar. Whiteline’s sway bar mount bushings not only boasts the latest in bushing material technology but feature a knurled ID specifically designed to retain grease. Whiteline bushings are made from the latest highest quality synthetic elastomer and designed to synchronize your suspension system for optimal safety, handling, performance, ride quality, longevity and reduced maintenance. They are the most positive link between your vehicles body, springs, struts, arms, bars and shocks.

Product Features:

• Internal grease reservoirs provide continual self lubrication for optimum friction management.
• Internal grease reservoirs provide continual self lubrication for optimum friction management.

Designed to fit a 20mm sway bar. Whiteline’s sway bar mount bushings not only boasts the latest in bushing material technology but feature a knurled ID specifically designed to retain grease. Whiteline bushings are made from the latest highest quality synthetic elastomer and designed to synchronize your suspension system for optimal safety, handling, performance, ride quality, longevity and reduced maintenance. They are the most positive link between your vehicles body, springs, struts, arms, bars and shocks.

Product Features:

• Internal grease reservoirs provide continual self lubrication for optimum friction management.
• Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
• Internal grease reservoirs provide continual self lubrication for optimum friction management.