1998 Porsche 911 Engine Parts
More 1998 Porsche 911 Engine Parts Categories
If you’re looking for an original Engine Parts replacement for a 1998 Porsche 911, you can search through our selection below. You’ll also find aftermarket and OEM Engine Parts to meet your needs.
Essential 1998 Porsche 911 Engine Parts
Carquest Premium – Camshaft Sensor (Part No.CSC1086)
from
$28.99
A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments, including the
Product Features:
See More
Product Features:
- Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
- Manufactured in an anti-static environment to ensure reliability and stability.
- Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
- Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.
Glyco – Glyco Main Bearing Set (Part No.A201024197GLY)
from
$446.45
Glyco advanced engine bearing technologies withstand heavy loads and cope with the increasingly challenging conditions of modern, environmentally-friendly engines. Glyco is the world’s largest manufacturer of OE-quality bearings. Every year, our engine bearings are fitted on more than 10 million engines around the world – from small bore engines to heavy-duty commercial vehicles and stationary engines. Driven by the need to reduce CO2 emissions, today’s engines extract more power from less fuel. Due to the increased temperature and load, conventional bearings struggle to cope. Thanks to over 100 years of innovation, Glyco provides bearings with advanced metallurgy that can withstand these challenges. Federal-Mogul invented Glyco Sputter Bearings with twice the service life of conventional bearings. Glyco developed G-188, the first intelligent bearing material, and were also first to launch a full lead-free material portfolio. Recent innovations include the highly durable Glyco IROX bearing shells, which address the challenges of hybrid, stop-start and downsized engines.
Product Features:
See More
Product Features:
- Original Equipment Quality
- Excellent wear resistance
- Low propensity to seize
- Reduction in Friction
Original Equipment – Oil Line O-Ring, 6×2.5mm (Part No.A6055184311OEA)
from
$1.62
Oil Line O-Ring, 6×2.5mm
Original Equipment – Oil Filler Cap Gasket (Part No.A615083338OEA)
from
$4.28
Oil Filler Cap Gasket
Original Equipment – Original Equipment Cylinder Head Gasket Set (Part No.A8010117107OEA)
from
$484.31
WARNING: This item cannot be returned for a replacement or refund if opened! The Original Equipment head gasket set is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.
Product Features:
See More
Product Features:
- OE Quality
- Improved reliability, durability, and engine performance
- Reduced oil consumption
- Embossment shapes designed to improve durability
- Adaptable design by number of layers
Elring – Valve Stem Seal (Part No.A80701608701ELR)
from
$3.54
All-around safety and reliability: Elring oil seals are manufactured for a wide range of applications. Whether they are installed in camshafts, crankshafts or axles, the high-precision seals are guaranteed to offer outstanding performance. Elring oil seals are made from tailor-made elastomer compounds to ensure excellent functionality and a long service life. They are available in various sizes and are supplied with detailed installation instructions.
Product Features:
See More
Product Features:
- Premium-quality materials such as FPM, ACM and PTFE for superior operational reliability
- Various designs specifically adapted to the area of application ensure excellent functionality and performance
- High-performance FPM guarantees optimum leak tightness
Original Equipment – Timing Guide Rail (Part No.A5040128362OEA)
from
$74.21
Timing Guide Rail
Aftermarket – Air Intake Hose Clam (Part No.B2008939817AFT)
from
$5.55
Air Intake Hose Clam
National – Shaft Repair Sleeve (Part No.99114)
from
$27.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Original Equipment – Camshaft Gear Spacer (Part No.A4290149822OEA)
from
$22.83
Camshaft Gear Spacer
National – Multi Purpose Seal (Part No.229005)
from
$39.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Iwis – Timing Chain (Part No.A510063364IWI)
from
$129.00
Timing Chain
Sebro – Intermediate Gear, Intermediate Shaft Gear (Part No.A512025363SEB)
from
$87.41
Intermediate Gear, Intermediate Shaft Gear
Original Equipment – Oil Return Tube (Part No.A604632666OEA)
from
$18.99
Oil Return Tube
TRW – TRW Intake Valve (Part No.A4060450500TRW)
from
$152.05
TRW Engine Components is a recognized developer of valves and valve train components. A wide range of materials and material combinations are used to meet the engineering requirements in the different engine applications. Materials vary from ferritic martensitic steels (intake valves) and austentic CrMn based steels to extreme heat and corrosion resistant Nickel base super alloy for exhaust valves. To improve wear and corrosion resistance, valves can be chromium plated or nitrided. These coatings are used to improve the compatibility of the valve stem surface to the valve guide material. If necessary, exhaust valves (and in some cases also intake valves) can be hard-faced. In hard-facing, a more heat and wear resistant material is welded to form the valve seat. Seat hard-facing extends the valve life significantly.
Product Features:
See More
Product Features:
- OE Quality
- Optimized for strength
- Heat and corrosion resistant
- Chromium plated or nitrided
- Stem optimized to resist wear
Carquest Premium – Barometric Pressure Sensor Connector (Part No.PTA1104)
from
$21.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
National – Redi-Sleeve (Part No.99353)
from
$82.99
Redi-Sleeve
Aftermarket – Valve Cover Gasket (Part No.A8030179448AFT)
from
$9.88
Valve Cover Gasket
Canyon Engine – Manganese Bronze Valve Guide (Part No.A3060169741CEC)
from
$8.05
The Canyon Engine Valve Guide is manufactured using Manganese Bronze and is an exact duplication of the original equipment part. The valve guides are complete with the snap ring installed (Mercedes) and the correct color code indicating the oversize diameter.
Product Features:
See More
Product Features:
- OE Quality
- Same design as the original equipment part
- Manufactured from Manganese Bronze material
- Complete with snap ring (Mercedes)
Original Equipment – Valve Cover Screw (Part No.A3161445220OEA)
from
$1.89
Valve Cover Screw
Dansk – Valve Cover (Part No.A31601318553DSK)
from
$369.05
Valve Cover
Aftermarket – Camshaft O-Ring (Part No.A400349846AFT)
from
$5.76
Camshaft O-Ring
Original Equipment – Connecting Rod Nut (Part No.A212022385OEA)
from
$3.62
Connecting Rod Nut
Original Equipment – Oil Return Tube Kit (Part No.A604425232OEA)
from
$50.05
Oil Return Tube Kit
Original Equipment – Oil Return Tube Seal (Part No.A6045437690OEA)
from
$5.85
Oil Return Tube Seal
Original Equipment – Timing Cover Washer (Part No.A5068668458OEA)
from
$6.69
Timing Cover Washer
Original Equipment – Valve Spring Set (Part No.A4151395260OEA)
from
$18.50
Valve Spring Set
Original Equipment – Valve Spring (Part No.A4150263760OEA)
from
$9.20
Valve Spring
Popular 1998 Porsche 911 Engine Parts Categories
1998 Porsche 911 Engine Parts
You count on your 1998 Porsche 911 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Engine Parts. With 49 Engine Parts ranging in price from $1.58 to $484.31, you’re sure to find everything you need for your 1998 Porsche 911.
Brands matter. If you want to shop a specific Engine Parts brand, we stock 14 different brands like National, Carquest Premium, and NTK. 1998 Porsche 911 Engine Parts start as low as $1.58!
One of the best ways to find top quality OEM or aftermarket Engine Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 8 extensive product reviews on 1998 Porsche 911 Engine Parts.
Did we mention you can order your Engine Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Engine Parts inventory for your 1998 Porsche 911 below to get started!
Top-Rated Engine Parts Brands For Your 1998 Porsche 911
Trusted Engine Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1998 Porsche 911 running right for years to come. In our inventory you’ll find brands like National, Carquest Premium, NTK, and even more.
Popular National Engine Parts
You’ll find popular National brand products across Engine Timing Parts. All are waiting to get your 1998 Porsche 911 back on the road. Some of the top-rated National products in these categories are:
FAQs for 1998 Porsche 911 Engine Parts
What are the most purchased Engine Parts for the 1998 Porsche 911?
Out of 49 Engine Parts for the 1998 Porsche 911, the most popular in our inventory are:
from
$21.99
This product is not rated
Barometric Pressure Sensor Connector
Camshaft Position Sensor Connectors
