1998 Mercedes-Benz C280 Engine Cooling Parts

Rein Automotive OE Quality expansion tank caps are designed to be direct replacements for OE caps. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life. Rein Automotive OE quality expansion tank caps keep the coolant system at the proper pressure just like the OE cap.

Product Features:

• Manufactured to strict engineering standards/specifications in materials and tolerances.
• Direct fit.
• Meets or exceeds pressure specifications demanded by the OE manufacturer.
• Produced by an original equipment supplier.

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

• High torque and rigidity
• Sensor-safe, non-corrosive formula
• OEM specified
• Low-odor, non-corrosive formula
• Ideal for closed spaced bolt patterns

Permatex’s The Right Stuff 90 Minute Series offers the fastest return to service in a in just 90 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 90 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

• Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
• Sensor-safe, non-corrosive, RTV silicone
• Protects against leaks caused by vibration and thermal expansion
• Meets performance specs of OE silicone gaskets
• Quickly returns vehicle to service in just 90 minutes

High-tech fan clutches made by SACHS reduce the fan speed by activating or deactivating the fan, depending on the current cooling requirements. That way, they reduce irritating noises and help to save fuel. With a low engine load, the head wind often suffices to dissipate the waste heat from radiator and engine. In this case, a low fan speed or even zero fan speed is sufficient. With rising temperature in the engine compartment and decreasing speed, there is an increasing risk of engine overheating and heat accumulation. This is for instance the case during hill drives or in stop-and-go traffic. Now, the fan clutch is activated and the fan ensures a sufficient air flow through the radiator.

Product Features:

• Out of box, drop in replacements
• Factory mounts for easy install
• Exact fit
• Reduced labor time
• Higher customer satisfaction

OEM specified. Designed specially for high-torque and high vibration applications, like those common in import engines, this premium RTV gasket maker exceeds manufacturers’ performance requirements. Sensor-safe, low odor, and non-corrosive. Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids. Temperature range -65ºF to 500ºF (-54 Deg. C to 260 Deg. C) intermittent.

Product Features:

• Designed specially for high-torque and high vibration applications
• Maximum vibration resistance with outstanding resistance to oils, cooling and shop fluids
• OEM specified
• Low-odor, non-corrosive formula
• Temperature Range: -65 Deg. F to 500 Deg. F (-54 Deg. C to 260 Deg. C)

This engine auxiliary water pump is designed to match the fit and function of the original pump on specified applications, and is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this engine auxiliary water pump is designed to match the fit and function of the original pump on specified applications
• Restores functionality – reliable replacement for an original pump that has failed to provide sufficient water flow
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

The APA/URO expansion tank is made of the highest quality materials and is engineered to meet or exceed the OEM specifications for performance, fit and durability.

Product Features:

• OE-Equivalent and Direct Fit for easy Installation.
• OE style connections and fittings.
• Made of highly durable materials.
• Resistant to thermal wear and cracking.

Tester adapter for the 9300 and MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:

• Machined metal construction
• Works with MT-300 pressure tester
• Tests coolant caps
• Professional quality

Aluminum Core Radiator The Behr replacement radiator guarantees the same quality fit and performance as the OE radiator it replaces. The Behr radiator core is manufactured using high quality anti corrosive aluminum and fiber glass-reinforced polyamide coolant tanks that are highly resistant to cracking and deformation.

Product Features:

• OE-Equivalent
• Direct fit for easy installation.
• High quality corrosion resistant materials.
• OE Style mounting brackets and hose connections.
• Mechanically bonded aluminum core.
• Integrated transmission oil cooler when applicable.

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

• Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

Radiator Drain Plug

The Febi/Bilstein Engine Cooling Fan Blade is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

• Premium aftermarket replacement
• Provides performance and dependability
• Manufactured to meet OE specifications

Rivet

Water Pump Pulley

Rein Automotive OE temperature sensors are made to factory specifications ensuring proper fit, form and function. The temperature sensor is used to report exhaust temperatures to the vehicle’s ECU. The vehicle uses this information to control engine and emission paramaters. Rein temperature sensors include a vehicle specific connector that fits directly into the factory plug. Our quality temperature sensors aim to provide the professional repair technician and vehicle owner the peace of mind and trust that is expected from an OE component.

Product Features:

• Direct OE replacemet
• Designed to meet or exceed factory specifications
• Made using high quality materials
• Uses vehicle specific style connector for quick replacement.

Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

• 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
• Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
• Brass sensor housing precision machined to meet or exceed OE thermal conductivity
• OE precision matched thermistor position for correct output parameters
• Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

The Graf Water Pump contains no remanufactured parts and is produced using an optimized all metal impeller design to assist in cooling under high RPM, and performance demands. Selection of raw materials, reliability of machinery and production processes, stringent controls throughout the production process, from melting to fitting, as well as reliability tests performed using equipment able to determine true performance, go to ensure this product is a real guarantee of safety and long life. The Graf water pump is centrifugal in type and comprises a bladed rotor linked by means of a shaft (which rotates on bearings housed in a support) to the drive gear; the seal between the pump and the motor block is guaranteed by a gasket, while the inside of the pump is guaranteed by a mechanical seal. Component parts: Impeller: supplies the fluid with the necessary energy to cover the entire cooling circuit. Mechanical seal: ensures fluid seal inside the pump. Bearing: transmits movement to the impeller and supports any ventilation parts. Entrainment part: for transmitting movement to the bearing. Pump body: supports the basic pump component parts and conveys the coolant in the motor block.

Product Features:

• All the component parts fitted are pre-tested to evaluate durability, performance and reliability.
• The bearings undergo a durability test equivalent to nominal lifespan and are then inspected to assess integrity.
• The mechanical seals are tested in extreme coolant temperature conditions according to predefined cycles.
• The shape of the impellers is optimized thanks to the use of prototypes on which flow and performance tests are performed.
• On both the entrainment parts and the bodies, the choice of materials and/or technologies different to original ones is made on the basis of structural and mechanical tests.
• After assembly all the pumps undergo seal tests on units that reject those with leaks above set limits.

The Graf Water Pump contains no remanufactured parts and is produced using an optimized all metal impeller design to assist in cooling under high RPM, and performance demands. Selection of raw materials, reliability of machinery and production processes, stringent controls throughout the production process, from melting to fitting, as well as reliability tests performed using equipment able to determine true performance, go to ensure this product is a real guarantee of safety and long life. The Graf water pump is centrifugal in type and comprises a bladed rotor linked by means of a shaft (which rotates on bearings housed in a support) to the drive gear; the seal between the pump and the motor block is guaranteed by a gasket, while the inside of the pump is guaranteed by a mechanical seal. Component parts: Impeller: supplies the fluid with the necessary energy to cover the entire cooling circuit. Mechanical seal: ensures fluid seal inside the pump. Bearing: transmits movement to the impeller and supports any ventilation parts. Entrainment part: for transmitting movement to the bearing. Pump body: supports the basic pump component parts and conveys the coolant in the motor block.

Product Features:

• All the component parts fitted are pre-tested to evaluate durability, performance and reliability.
• The bearings undergo a durability test equivalent to nominal lifespan and are then inspected to assess integrity.
• The mechanical seals are tested in extreme coolant temperature conditions according to predefined cycles.
• The shape of the impellers is optimized thanks to the use of prototypes on which flow and performance tests are performed.
• On both the entrainment parts and the bodies, the choice of materials and/or technologies different to original ones is made on the basis of structural and mechanical tests.
• After assembly all the pumps undergo seal tests on units that reject those with leaks above set limits.

Coolant Level Sensor

Coolant Level Sensor

This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Product Features:

• Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles
• Complete package – assembly is designed with the same materials and components as the original part
• Quality assured – motors are tested in laboratory settings to ensure performance
• Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership

The Vemo Auxiliary Cooling Fan is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

• OE quality
• Quiet operation and dependable performance
• Dual Bearing design technology
• Vibration free operation
• Precision assembled and balanced with all new components
• Tested to OEM specifications

This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

• Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models
• Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
• Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
• Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies

Carquest Premium Integrated Housing Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

• High grade stainless steel and copper construction
• Meets or exceeds OEM standards
• Consistent and precise response to cooling system needs
• Original equipment design for worry-free direct fit replacement
• 100% tested and calibrated

Rein Automotive OE quality thermostat assemblies install, fit and perform the way the original manufacturer intended. These assemblies are designed to meet or exceed the OE materials used. Rein thermostat housings are constructed of metal or plastic based on vehicle specific factory requirements. The housings are constructed from molds cast directly from the OEM parts to meet the strict tolerances of the vehicle’s factory specifications. This ensures a smooth and easy installation, just as one would expect to find with OE quality. Rein thermostats are produced with high-quality metals and components to ensure proper durability and service life. The thermostats are temperature calibrated to have a consistent and precise response suiting cooling system needs. Our quality thermostat assemblies aim to provide the profession repair technician and vehicle owner the peace of mind and trust that is expected from an OE quality component.

Product Features:

• Matches original equipment design specifications
• All gaskets or seals necessary for installation are supplied with thermostats
• Manufactured to strict engineering standards/specifications in materials and tolerances
• Thermostat set to 100 degrees Celsius to maintain optimal running temperature

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

• Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

• High torque and rigidity
• Sensor-safe, non-corrosive formula
• OEM specified
• Low-odor, non-corrosive formula
• Ideal for closed spaced bolt patterns

Water Pump Gasket