1998 Mazda Protege Engine Cooling Parts

Essential 1998 Mazda Protege Engine Cooling Parts

Dorman – Coolant Housing/Water Outlet: With Housing and Gasket, 15 Degree Neck Angle (Part No.902-5019)

Coolant Housing/Water Outlet: With Housing and Gasket, 15 Degree Neck Angle

from

$31.49
This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models.
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings
See More

Motorad – Standard Thermostat: 192 Degrees (Part No.414-192)

Standard Thermostat: 192 Degrees

from

$10.49
Manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds Original Equipment Manufacturer standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Ishino Stone – Water Outlet Gasket (Part No.G3045244492ISH)

Water Outlet Gasket

from

$4.52
Water Outlet Gasket

Dorman – Bumper Retainer Head Dia. 0.69 In. Shank Long 0.5 In. Hole Dia. 0.33 In. (Part No.963-557)

Bumper Retainer Head Dia. 0.69 In. Shank Long 0.5 In. Hole Dia. 0.33 In.

from

$3.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T2188)

Engine Water Pump: New, Gasket/Seals Included

from

$44.99
Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:
  • 100% tested for reliable performance
  • Durable housing features precisely machined mounting surface for proper sealing and fitment
  • Equipped with weep chamber or similar feature to help prevent unnecessary replacement
  • Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
  • All gaskets or seals necessary for water pump are included
  • This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
  • This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
  • This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components
See More

Dorman – Non-Pressurized Coolant Reservoir: White, Plastic, Original Equipment Replacement (Part No.603-507)

Non-Pressurized Coolant Reservoir: White, Plastic, Original Equipment Replacement

from

$67.99
This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.

Product Features:
  • Direct replacement – this engine coolant reservoir matches the fit and function of the original part.
  • Ideal solution – engineered for a seamless installation.
  • Durable construction – manufactured from quality materials to withstand underhood heat and vibration
  • Trustworthy design – backed by 100 years of automotive aftermarket experience
See More

Dorman – Help – Engine Coolant Reservoir Cap: Flip Top, Plastic, 1 Pack (Part No.54234)

Engine Coolant Reservoir Cap: Flip Top, Plastic, 1 Pack

from

$25.99
Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:
  • Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap.
  • Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
  • Seamless fit – reverse-engineered from the original equipment to fit perfectly
  • Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership
See More

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

from

$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Imperial – Electric Fan – 12" Diameter (Part No.226112)

Electric Fan - 12" Diameter

from

$94.99
Electric fan with 12″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.

Product Features:
  • Rapid-Cool® Thin-Line electric fans
  • 12″ Diameter
  • 800 CFM
  • Use as a pusher or puller fan
See More

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.432538)

Radiator: With Transmission Oil Cooler

from

$151.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:
  • Thermal tested under real-life temperature simulations
  • High tensile strength aluminum for maximum crimp strength
  • Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
  • Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
See More

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

from

$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:
  • Sensor-safe, noncorrosive RTV silicone gasket material
  • Formulated specifically for water pumps and thermostat housings
  • Highest water-glycol resistance available in RTV silicone
  • Superior adhesion and flexibility
  • Can be used as a gasket maker or dressing
See More

Felpro – Engine Coolant Outlet Gasket (Part No.36103)

Engine Coolant Outlet Gasket

from

$3.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Beck/Arnley – Relay (Part No.203-0095)

Relay

from

$20.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Made with high quality materials for internal coil and switch
  • Includes anti-corrosion terminals
  • Constructed to withstand an underhood environment
  • Application specific for this vehicle
See More

Carquest Premium – Multi Purpose Relay (Part No.RAA1558)

Multi Purpose Relay

from

$24.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Factory Air – Coolant Temp Sensor Switch (Part No.36413)

Coolant Temp Sensor Switch

from

$29.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Contains gaskets, O-rings, or seals to properly replace the product
  • Brass construction for accurate temperature sensing
  • Color coded for easy identification
  • Zinc coated terminal to resist corrosion
See More

NTK – Engine Coolant Temperature Sensor (Part No.EF0089)

Engine Coolant Temperature Sensor

from

$33.99
The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:
  • OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
  • FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
  • THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
See More

Felpro – Engine Coolant Outlet Gasket (Part No.11760)

Engine Coolant Outlet Gasket

from

$2.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Nippon Reinz – Water Pump Housing Gasket (Part No.G3031244475NRZ)

Water Pump Housing Gasket

from

$11.02
NIPPON REINZ engineers work with OEMs to develop complete engine sealing solutions for gasoline, diesel, and alternative energy vehicles. We employ custom sealing solutions through our expert problem solving utilizing our regional research and development centers. As an Integral Partner with Virtually Every major vehicle and engine manufacturer worldwide, NIPPON REINZ offers a comprehensive range of sealing Innovative Systems, INCLUDING Head gaskets, Heat shields, sealing modules, secondary gaskets, Valve stem Seals, and transmission components.
See More

Imperial – Electric Fan – 14" Diameter (Part No.226114)

Electric Fan - 14" Diameter

from

$99.99
Product Features:
  • Motors built and tested to quality specifications
  • 14 in. universal fit reversible fan
  • 1250 CFM
  • UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
See More

Dorman – Radiator Fan Assembly: Single, Cost Effective And Reliable (Part No.620-740)

Radiator Fan Assembly: Single, Cost Effective And Reliable

from

$70.99
This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Product Features:
  • Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles.
  • Complete package – assembly is designed with the same materials and components as the original part.
  • Quality assured – motors are tested in laboratory settings to ensure performance
  • Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership
See More

Carquest Premium – Radiator Cap: 13 PSI (Part No.10327)

Radiator Cap: 13 PSI

from

$18.79
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:
  • Safety lever to vent coolant pressure before removal
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Carquest Premium – Radiator Cap: 13 PSI (Part No.10241)

Radiator Cap: 13 PSI

from

$14.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Ishino – Water Pipe O-Ring (Part No.G2026244351ISH)

Water Pipe O-Ring

from

$1.71
Water Pipe O-Ring

Carquest Premium – Radiator Cap Tester Adapter (Part No.12021)

Radiator Cap Tester Adapter

from

$17.79
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:
  • Machined metal construction
  • Works with MT-300 pressure tester
  • Tests coolant caps
  • Professional quality
See More

Carquest Premium – Radiator Cap Tester Adapter (Part No.12024)

Radiator Cap Tester Adapter

from

$16.49
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:
  • Machined metal construction
  • Works with MT-300 pressure tester
  • Tests coolant caps
  • Professional quality
See More

Imperial – Adjustable Thermostatic Fan Control (Part No.226203)

Adjustable Thermostatic Fan Control

from

$22.99
Adjustable Thermostatic Fan Control; Economy Model; 32-248°F. Controls the operating temperature of Imperial electric fans

Product Features:
  • Economy adjustable thermostatic fan control
  • Economy Model; 32-248°F
  • For use with Imperial electric fans
  • Probe installs into radiator fins
See More

Carquest Premium – Engine Cooling Fan Module (Part No.ACC1313)

Engine Cooling Fan Module

from

$94.99
All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Imperial – Thermostatic Fan Control – Preset (Part No.226206)

Thermostatic Fan Control - Preset

from

$38.49
Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:
  • Preset thermostatic fan control
  • 185°F preset
  • For use with Imperial electric fans
  • Probe installs into radiator fins
See More

1998 Mazda Protege Engine Cooling Parts

Maybe you’re in the middle of a full rebuild of that 1998 Mazda Protege. Maybe you just need a couple of Engine Cooling Parts. Either way, Advance Auto Parts has 48 different Engine Cooling Parts in our inventory ranging from $1.71 to $151.99. That means you can find the exact parts or products you need to keep that 1998 Mazda Protege running smoothly.

Engine Cooling Parts are only as good as their brand. We stock 19 different brands to make sure you have plenty of trusted parts to choose from for your 1998 Mazda Protege. Permatex, Carquest Premium, and Imperial are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Engine Cooling Parts for your 1998 Mazda Protege, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 2,024 reviews in this category, some of the top rated parts include Adjustable Thermostatic Fan Control with 3.4 stars and Radiator Cap: 13 PSI with 4.0 stars.

So if you’re in the market for aftermarket Engine Cooling Parts to keep your 1998 Mazda Protege rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Engine Cooling Parts Brands To Make Your 1998 Mazda Protege Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1998 Mazda Protege demands trusted brand parts and products to keep it running. Many trusted brands of Engine Cooling Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Protege the best it can be. Be sure to browse some of our top Engine Cooling Parts brands and parts.

Popular Felpro Engine Cooling Parts

We carry Felpro parts in our stock across Thermostat and Water Outlet Gaskets categories, plus more. For a 1998 Mazda Protege, our most popular Felpro Engine Cooling Parts include:
WATER OUTLET GASKET
from $3.99
(15)
WATER OUTLET GASKET
Thermostat and Water Outlet Gaskets

FAQs for 1998 Mazda Protege Engine Cooling Parts

What are the most purchased Engine Cooling Parts for the 1998 Mazda Protege?

Out of 48 Engine Cooling Parts for the 1998 Mazda Protege, the most popular in our inventory are:
Radiator Cap: 13 PSI
from $11.99
(193)
Radiator Cap: 13 PSI
Radiator Caps
Adjustable Thermostatic Fan Control
from $22.99
(35)
Adjustable Thermostatic Fan Control
Engine Cooling Fan Controllers
Electric Fan - 12" Diameter
from $94.99
(38)
Electric Fan – 12" Diameter
Radiator Fan Motors

What are the top-rated 1998 Mazda Protege Engine Cooling Parts?

Top-rated Engine Cooling Parts for your 1998 Mazda Protege based on customer reviews/ratings are:
Adjustable Thermostatic Fan Control
from $55.99
(33)
Adjustable Thermostatic Fan Control
“I used this fan control on my 2006 pt cruiser. It’s simple to install and works great. I’m going to get another one for my 1999 jeep Cherokee.”
Radiator Cap: 13 PSI
from $18.79
(21)
Radiator Cap: 13 PSI
“great price, easy install”
Electric Fan - 10" Diameter
from $67.99
(14)
Electric Fan – 10" Diameter
“So, the Air Conditioner Condenser fan motor failed on my 2003 Dodge Ram 1500. It turns out that the 2002 – 2005 Rams all use the same AC Condenser fa”