1998 Isuzu Oasis Cooling and Climate Controls
Find Your Specific 1998 Isuzu Oasis Cooling and Climate Controls
Below you will find various in-demand Isuzu Cooling and Climate Controls, components and accessories for your 1998 Oasis. Advance Auto Parts has popular Oasis parts like Engine Cooling Parts, Heating Parts, Blower Motor and Related Products and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other Oasis model years including
1996,
1997,
1999 and more. Select a category of 1998 Isuzu Oasis Cooling and Climate Controls below and start saving instantly.
Popular 1998 Isuzu Oasis Cooling and Climate Controls Categories
Essential Cooling and Climate Controls for 1998 Isuzu Oases
Carquest Premium – A/C Condenser (Part No.6345)
from
$187.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.
Product Features:
See More
Product Features:
- This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
- The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
- Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
- Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
- All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
- We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
- Our condensers are manufactured from rigid design standards to fit OEM dimensions.
- Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
Carquest Premium – Temperature Sender With Gauge (Part No.WTC1054)
from
$21.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Factory Air – Cap & Valve A/C System Seal Kit (Part No.26783)
from
$17.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- All the seals needed to complete the job
- Compatible with both R12 and R134a refrigerants
- SUV and rear air applications
- Application specific
KAI – A/C System Seal Kit (Part No.FTT010045)
from
$15.99
New Standard Replacement A/C System Seal Kit, MT2560, L3 Engine
Product Features:
See More
Product Features:
- MT2560, L3 Engine
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Valeo – A/C Compressor w/ Clutch, New (Part No.R10001099698VAL)
from
$465.77
Valeo manufactures a new A/C Compressor with clutch assembly that is the same quality fit and performance of the OE compressor it replaces.
Product Features:
See More
Product Features:
- OEM Quality Direct fit Application
- Guarantees OE quality performance, durability and fitment.
- A product 100% ‘new’ developed by Valeo
- Matching quality compressor.
- Equipped with a new clutch assembly.
- Design that associates performance, output and reliability.
KAI – A/C Service Valve (Part No.FTT010751)
from
$10.99
New Standard Replacement A/C Service Cap And Valve Kit, MT2909
Product Features:
See More
Product Features:
- MT2909
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Imperial – Adjustable Thermostatic Fan Control (Part No.226204)
from
$55.99
Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.
Product Features:
See More
Product Features:
- Adjustable thermostatic fan control
- 160-210°F push-in probe
- For use with Imperial electric fans
- Probe installs into radiator fins
Flex A Lite – Trimline Straight Blade Electric Fan (Part No.116)
from
$119.99
Trimline Straight Blade Electric Fan
Sankei Switches – Sankei Switches Radiator Cap (Part No.G101045813SAK)
from
$11.27
The Sankei Switches radiator cap range has been developed to operate within original equipment manufacturer’s specifications. A faulty radiator cap can cause your car to boil-over at a lower temperature. Test or replace the coolant cap when servicing the cooling system.
Product Features:
See More
Product Features:
- Meets Original Equipment specifications.
- Made from premium materials.
- Designed to function on open cooling systems and overflow reservoir type systems.
Carquest Premium – A/C New, with Clutch, with 10PA17C Compressor (Part No.T68315)
from
$308.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
- New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
- The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
- All new compressors must pass a helium leak test and pump up function test prior to packaging.
- O-Rings and gaskets necessary for installation are included.
OPT – Engine Coolant Thermostat Gasket (Part No.G403152541OPT)
from
$3.80
The OPT Engine Coolant Thermostat Gasket is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Seals the thermostat housing and helps prevent coolant from leaking from the engine for proper engine temperature
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Imperial – Electric Fan – 14" Diameter (Part No.226114)
from
$99.99
Product Features:
See More
- Motors built and tested to quality specifications
- 14 in. universal fit reversible fan
- 1250 CFM
- UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)
from
$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.
Product Features:
See More
Product Features:
- Sensor-safe, noncorrosive RTV silicone gasket material
- Formulated specifically for water pumps and thermostat housings
- Highest water-glycol resistance available in RTV silicone
- Superior adhesion and flexibility
- Can be used as a gasket maker or dressing
Felpro – Engine Coolant Thermostat Housing Gasket (Part No.35480)
from
$6.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Carquest Premium – Coolant Temperature Sensor (Part No.WTC1012)
from
$29.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
NOK – Water Pipe O-Ring (Part No.G202665192NOK)
from
$3.21
Water Pipe O-Ring
Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)
from
$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.
Product Features:
See More
Product Features:
- Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
- Sensor-safe, non-corrosive, RTV silicone
- Protects against leaks caused by vibration and thermal expansion
- Meets performance specs of OE silicone gaskets
- Quickly returns vehicle to service in just 1 minute
Dorman – Coolant Housing/Water Outlet: With Housing and Gasket, 45 Degree Neck Angle (Part No.902-5032)
from
$25.49
This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
Product Features:
See More
Product Features:
- Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models.
- Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
- Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
- Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings
Carquest Premium – Radiator Cap Tester Adapter (Part No.12024)
from
$16.49
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.
Product Features:
See More
Product Features:
- Machined metal construction
- Works with MT-300 pressure tester
- Tests coolant caps
- Professional quality
NTC – Thermostat (Part No.G4000120400NTC)
from
$27.92
NTC offers a full line of thermostats to replace your original equipment thermostat. This includes a wide variety of temperature ranges all designed to operate within OEM specifications.
Product Features:
See More
Product Features:
- Strict quality control, and functional testing
- Self-cleaning and self-aligning thermostat valve
- Original equipment design provides exact fit and performance
- Precise sealing edges reduce leakage and premature cooling
- Temperature sensitive heat motor provides consistent valve response for smooth performance and precise engine cooling
- Stainless steel assembly and springs are engineered for long life
Nippon Reinz – Engine Coolant Thermostat Housing Gasket (Part No.G4020120278NRZ)
from
$4.21
The Nippon Reinz Engine Coolant Thermostat Housing Gasket is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Seals the thermostat housing and helps prevent coolant from leaking from the engine for proper engine temperature
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Carquest Premium – A/C Plate and Fin Evaporator (Part No.T54978)
from
$178.99
Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.
Product Features:
See More
Product Features:
- The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
- The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
- The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
- The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
- O-Rings and gaskets necessary for installation are included.
Carquest Premium – A/C Compressor Relay Connector (Part No.PTC1099)
from
$52.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – Coolant Housing/Water Outlet: Gasket Included (Part No.85157)
from
$58.99
We are proud to offer this CARQUEST product line: CARQUEST Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.
Product Features:
See More
Product Features:
- Meets and/or exceeds OEM standard
- Includes quality gasket or O-ring to ensure proper seal (where applicable)
- Coated with corrosion and rust inhibitor
- 100% leak tested
- Direct-fit replacement for ease of installation
MTC – MTC ABS Speed Sensor (Part No.N6030227535MTC)
from
$162.10
The MTC OE quality ABS speed sensor is engineered to the exact specifications of the vehicle manufacturer to ensure the replacement sensor is the same in quality and function as the part installed as original equipment.
Product Features:
See More
Product Features:
- OE quality direct fit application
- Manufactured to meet or exceed OE requirements and testing
- Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference
FAE – Engine Cooling Auxiliary Thermo-Fan Switch (Part No.G5030437401FAE)
from
$26.54
The FAE Engine Cooling Thermo-Fan Switch is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Corrosion resistant housings
- Nickel-plated or brass terminals for superior conductivity
- High-temp composite O.E.M.-type connectors designed to mate with vehicle wiring harness without modification
- Thermal switches matched to OEM temperatures to assure consistent performance
NPW – NPW Water Pump (Part No.G300052116NPW)
from
$59.49
The NPW water pump is a 100% new replacement and contains no remanufactured components, assuring original equipment performance, quality and fit.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application.
- 100% new with no remanufactured parts.
- Advanced impeller design.
- Quality cast housing.
- Precision bearings.
- Resistant to corrosion.
- Unitized bearing assembly.
Carquest Premium – Blower Motor: Without Wheel (Part No.35634)
from
$69.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.
Product Features:
See More
Product Features:
- Meets or exceeds OE design and performance
- Magnetic size and properties compare or exceed OEM
- Windings meet or exceed OEM specifications
- Motor RPM equivalent to or exceeds OEM motor
Upgrade your 1998 Isuzu Oasis with Top-Quality Cooling and Climate Controls
When it comes to maintaining or upgrading your 1998 Isuzu Oasis, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Isuzu or enhancing its overall performance, Cooling and Climate Controls are key to keeping your Oasis functioning at its best. At Advance Auto Parts, we offer a wide selection of 71 Cooling and Climate Controls for the 1998 Isuzu Oasis, designed to meet your needs without breaking the bank.
From
Engine Cooling Part
replacements to
Heating Parts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 1998 Isuzu Oasis at great prices.
Our Cooling and Climate Controls inventory for this model
ranges from just $2.28 to $367.99, with
an average price of $55.78.
Our 71 Cooling and Climate Controls in stock come from 31 trusted brands, so you’re sure to find the right part for your 1998 Isuzu Oasis without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1998 Isuzu Oasis, we stock popular OEM and aftermarket Cooling and Climate Controls from top names
like Permatex, Carquest Premium, Imperial, and more.
Permatex Cooling and Climate Controls
start at just $6.99 and boast an impressive 5 stars average rating from customers.
Carquest Premium and Imperial also bring quality to the table, with Cooling and Climate Controls available starting at $14.79, and at an average 4 stars rating.
With 784 customer reviews and counting, our 1998 Isuzu Oasis Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1998 Isuzu Oasis is always ready to roll. We’re committed to providing you with everything you need to keep your Oasis in top shape, all in one place.
Start shopping confidently below for your 1998 Isuzu Oasis!
Best-Selling Engine Cooling Parts for 1998 Isuzu Oases
Enhance the driving experience in your Isuzu with 49 quality Engine Cooling Part components, starting at $2.28.
Felpro – Engine Coolant Thermostat Housing Gasket (Part No.35480)
from
$6.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Imperial – Adjustable Thermostatic Fan Control (Part No.226203)
from
$22.99
Adjustable Thermostatic Fan Control; Economy Model; 32-248°F. Controls the operating temperature of Imperial electric fans
Product Features:
See More
Product Features:
- Economy adjustable thermostatic fan control
- Economy Model; 32-248°F
- For use with Imperial electric fans
- Probe installs into radiator fins
Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)
from
$26.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.
Product Features:
See More
Product Features:
- High torque and rigidity
- Sensor-safe, non-corrosive formula
- OEM specified
- Low-odor, non-corrosive formula
- Ideal for closed spaced bolt patterns
Carquest – Engine Cooling Fan Switch (Part No.TFS600)
from
$44.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- In manufacturing, we custom form the wax pellets for different temperature range specifications. All units are calibrated & tested to confirm switch actuation at their specified temperature
- The switch is designed using a formed bimetallic contact arm. The bimetal contact movement is achieved using the different expansion rates of two metals fused together. This is a creep action device, provides precise performance
- In production, all thermal switches are factory-calibrated to make electrical contact at the specified lower-temperature set point
- Robust design and high grade materials meet the stringent demands of today’s service professional
Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T1147)
from
$49.99
Carquest Premium drive motor inverter cooler water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, impeller, controller, gaskets, and seals are designed for long-lasting service life. These electric water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium auxiliary water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.
Product Features:
See More
Product Features:
- Built to meet or exceed OE fit, form and function
- All components necessary for installation are supplied with pump
- 100% tested for reliable performance
- Follow all enclosed instructions to maximize pump life and validate warranty
Felpro – WATER OUTLET GASKET (Part No.35469)
from
$5.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design
- Manufactured for the sealing repair environment
- Validated for fit, form, and function
- Quality that you can trust
Sankei Switches – Sankei Switches Radiator Cap (Part No.G101045813SAK)
from
$11.27
The Sankei Switches radiator cap range has been developed to operate within original equipment manufacturer’s specifications. A faulty radiator cap can cause your car to boil-over at a lower temperature. Test or replace the coolant cap when servicing the cooling system.
Product Features:
See More
Product Features:
- Meets Original Equipment specifications.
- Made from premium materials.
- Designed to function on open cooling systems and overflow reservoir type systems.
Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)
from
$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.
Product Features:
See More
Product Features:
- Sensor-safe, noncorrosive RTV silicone gasket material
- Formulated specifically for water pumps and thermostat housings
- Highest water-glycol resistance available in RTV silicone
- Superior adhesion and flexibility
- Can be used as a gasket maker or dressing
Carquest Premium – Radiator Cap: 16 PSI (Part No.10242)
from
$14.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Driveworks – Coolant Fan Switch (Part No.85232)
from
$35.99
Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.
Product Features:
See More
Product Features:
- Direct-fit OE replacement ensures ease of installation
- Designed to meet OE performance
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
Carquest – Coolant Temperature Sensor (Part No.WT5009)
from
$40.05
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Carquest Premium – Radiator Cap Tester Adapter (Part No.12024)
from
$16.49
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.
Product Features:
See More
Product Features:
- Machined metal construction
- Works with MT-300 pressure tester
- Tests coolant caps
- Professional quality
Imperial – Electric Fan – 12" Diameter (Part No.226112)
from
$94.99
Electric fan with 12″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.
Product Features:
See More
Product Features:
- Rapid-Cool® Thin-Line electric fans
- 12″ Diameter
- 800 CFM
- Use as a pusher or puller fan
Imperial – Adjustable Thermostatic Fan Control (Part No.226204)
from
$55.99
Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.
Product Features:
See More
Product Features:
- Adjustable thermostatic fan control
- 160-210°F push-in probe
- For use with Imperial electric fans
- Probe installs into radiator fins
Imperial – Electric Fan – 14" Diameter (Part No.226114)
from
$99.99
Product Features:
See More
- Motors built and tested to quality specifications
- 14 in. universal fit reversible fan
- 1250 CFM
- UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
Imperial – Thermostatic Fan Control – Preset (Part No.226206)
from
$38.49
Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.
Product Features:
See More
Product Features:
- Preset thermostatic fan control
- 185°F preset
- For use with Imperial electric fans
- Probe installs into radiator fins
Imperial – Thermostatic Fan Control – Adjustable (Part No.226208)
from
$62.99
Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.
Product Features:
See More
Product Features:
- Adjustable thermostatic fan control
- 160°F – 210°F thread-in probe
- For use with Imperial electric fans
- Thread-in probe for installation in water jacket or radiator
Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.431371)
from
$129.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.
Product Features:
See More
Product Features:
- Thermal tested under real-life temperature simulations
- High tensile strength aluminum for maximum crimp strength
- Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
- Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
Carquest Premium – Coolant Temperature Sensor (Part No.WTC1012)
from
$29.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Motorad – Standard Thermostat: 170 Degrees (Part No.242-170)
from
$12.49
Manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Carquest Premium – Temperature Sender With Gauge (Part No.WTC1054)
from
$21.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Motorad UltraStats – Thermostat: 170 Degrees (Part No.5242-170)
from
$15.49
This premium upgraded thermostat is everything you were looking for. UltraStat Thermostats are the toughest thermostats on the market. All heavy gauge stainless steel construction provides long-life durability, as well as complete corrosion resistance. Exclusive BLVT Valve technology minimizes thermal shock to cooling system components. This is the perfect upgrade to help insure your cooling system is working exactly as you need and expect it to for longevity.
Product Features:
See More
Product Features:
- Heavy gauge stainless steel components offer increased reliability and long-lasting durability
- Exclusive BLVT Valve Technology minimizes thermal shock to cooling system components
- Stainless steel thermal element for unmatched corrosion resistance and revolutionary REAX wax mixture provides quicker reaction time
- AccuSpring Design for stable temperature control and increased cabin comfort
Carquest Premium – Multi Purpose Relay (Part No.FCA1004)
from
$17.29
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest – Engine Coolant Temperature Switch (Part No.85A1001)
from
$35.49
The Carquest line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The Coolant Temperature Switch monitors the temperature of the engine’s coolant, activating fans at factory designated temperature set-points ensuring proper engine temperature levels and peak engine performance are maintained.
Product Features:
See More
Product Features:
- The Carquest line of aftermarket switches meet commercial demands and are competitively priced, providing professional technicians and DIY customers with an affordable alternative for repairs.
- Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your Coolant Temperature Switch.
- Designed and manufactured with quality materials, industry leading electronic components and strict quality controls. Engineered to meet OE performance.
NTK – Engine Coolant Temperature Sensor (Part No.EF0069)
from
$39.99
The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.
Product Features:
See More
Product Features:
- OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
- FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
- THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
FAE – Engine Cooling Auxiliary Thermo-Fan Switch (Part No.G5030437401FAE)
from
$26.54
The FAE Engine Cooling Thermo-Fan Switch is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Corrosion resistant housings
- Nickel-plated or brass terminals for superior conductivity
- High-temp composite O.E.M.-type connectors designed to mate with vehicle wiring harness without modification
- Thermal switches matched to OEM temperatures to assure consistent performance
Delphi – Engine Coolant Temperature Sensor (Part No.TS10180)
from
$56.99
Delphi temperature sensors are built with the latest OE technology; Delphi temperature sensors use durable, one-piece design; Delphi temperature sensors are impervious to electrical noise and interference.
Product Features:
See More
Product Features:
- Delphi temperature sensors deliver accurate readings and optimal performance
- Delphi’s one-piece design and automated production process eliminates internal connectors and failure points
- Each sensor is electrically insulated to eliminate interference from other components in the vehicle
- Delphi temperature sensors are impervious to electrical noise and interference
NTC – Thermostat (Part No.G4000120400NTC)
from
$27.92
NTC offers a full line of thermostats to replace your original equipment thermostat. This includes a wide variety of temperature ranges all designed to operate within OEM specifications.
Product Features:
See More
Product Features:
- Strict quality control, and functional testing
- Self-cleaning and self-aligning thermostat valve
- Original equipment design provides exact fit and performance
- Precise sealing edges reduce leakage and premature cooling
- Temperature sensitive heat motor provides consistent valve response for smooth performance and precise engine cooling
- Stainless steel assembly and springs are engineered for long life
Carquest Premium – Coolant Housing/Water Outlet: Gasket Included (Part No.85157)
from
$58.99
We are proud to offer this CARQUEST product line: CARQUEST Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.
Product Features:
See More
Product Features:
- Meets and/or exceeds OEM standard
- Includes quality gasket or O-ring to ensure proper seal (where applicable)
- Coated with corrosion and rust inhibitor
- 100% leak tested
- Direct-fit replacement for ease of installation
NTC – Water Temperature Sender (Part No.P403646668NTC)
from
$13.43
Water Temperature Sender
Felpro – Engine Water Pump Gasket (Part No.35482)
from
$3.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design
- Manufactured for the sealing repair environment
- Validated for fit, form, and function
- Quality that you can trust
Koyo Cooling – Radiator (Part No.G1000106286KCS)
from
$183.55
Plastic Tank / Aluminum Core Radiator Koyo radiators are available in plastic tank and aluminum core. The Nocolok brazing line keeps the highest quality standards, bringing you superior products you can rely on. The Koyo Cooling radiator has been engineered to the highest standards and incorporates application specific mounting locations for all fan shrouds, inlet-outlet hoses and top-bottom mounting pins, ensuring quick and pain-free installs.
Product Features:
See More
Product Features:
- All Aluminum Core and Plastic Tank
- OE Style mounting brackets and hose connections
- Integrated transmission oil cooler when applicable
- Compact and lightweight
Flex A Lite – Trimline Straight Blade Electric Fan (Part No.116)
from
$119.99
Trimline Straight Blade Electric Fan
Carquest Premium – Engine Cooling Fan Module (Part No.ACC1313)
from
$94.99
All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
AISIN – OE Replacement Water Pump (Part No.G300052116ASC)
from
$77.94
The AISIN Water Pump contains no remanufactured parts and provides optimal cooling without creating excess load to the engine. The highest quality materials are used, creating stronger body design and resistance to corrosion.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application.
- 100% new with no remanufactured parts.
- Advanced technological design.
- Carbon ceramic sealing.
- Resistant to corrosion.
- Optimum cooling performance and longevity.
NPW – NPW Water Pump (Part No.G300052116NPW)
from
$59.49
The NPW water pump is a 100% new replacement and contains no remanufactured components, assuring original equipment performance, quality and fit.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application.
- 100% new with no remanufactured parts.
- Advanced impeller design.
- Quality cast housing.
- Precision bearings.
- Resistant to corrosion.
- Unitized bearing assembly.
NTC – Tama Engine Coolant Temperature Sensor (Part No.C602060805NTC)
from
$50.81
The NTC-Tama Engine Coolant Temperature Sensor is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Gates – Thermostat Housing C (Part No.G4011120687GAT)
from
$42.63
Thermostat Housing C
Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)
from
$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.
Product Features:
See More
Product Features:
- Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
- Sensor-safe, non-corrosive, RTV silicone
- Protects against leaks caused by vibration and thermal expansion
- Meets performance specs of OE silicone gaskets
- Quickly returns vehicle to service in just 1 minute
FAE – Engine Coolant Temperature Sensor (Part No.C602060805FAE)
from
$32.00
The FAE Engine Coolant Temperature Sensor is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Sankei Switches – Auxiliary Fan Switch (Part No.G5030437401SAK)
from
$31.60
Auxiliary Fan Switch
Dorman – Coolant Housing/Water Outlet: With Housing and Gasket, 45 Degree Neck Angle (Part No.902-5032)
from
$25.49
This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
Product Features:
See More
Product Features:
- Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models.
- Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
- Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
- Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings
Sankei Switches – Water Temperature Se (Part No.P403646668SAK)
from
$14.93
Water Temperature Se
Aisan – Thermostat Gasket (Part No.G4031928197ASC)
from
$4.47
Thermostat Gasket
Nippon Reinz – Engine Coolant Thermostat Housing Gasket (Part No.G4020120278NRZ)
from
$4.21
The Nippon Reinz Engine Coolant Thermostat Housing Gasket is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Seals the thermostat housing and helps prevent coolant from leaking from the engine for proper engine temperature
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
OPT – Engine Coolant Thermostat Gasket (Part No.G403152541OPT)
from
$3.80
The OPT Engine Coolant Thermostat Gasket is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Seals the thermostat housing and helps prevent coolant from leaking from the engine for proper engine temperature
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
OPT – Water Pump Gasket (Part No.G304058063OPT)
from
$3.46
Water Pump Gasket
NOK – Water Pipe O-Ring (Part No.G202665192NOK)
from
$3.21
Water Pipe O-Ring
Most Popular 1998 Isuzu Oasis Heating Parts
Customize your Isuzu with 1 Heating Parts products
like Heater Valves, all
priced under $72.40.
Santech – Heater Valve (Part No.R30203350771SII)
from
$72.40
Heater Valve
Top Picks for 1998 Isuzu Oasis Blower Motor and Related Products
Upgrade Isuzu Oases with top-quality Blower Motor and Related Products parts, including 5 OEM and aftermarket selections for your 1998 model.
Carquest Premium – Blower Motor: Without Wheel (Part No.35634)
from
$69.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.
Product Features:
See More
Product Features:
- Meets or exceeds OE design and performance
- Magnetic size and properties compare or exceed OEM
- Windings meet or exceed OEM specifications
- Motor RPM equivalent to or exceeds OEM motor
Carquest Premium – HVAC Blower Motor Resistor (Part No.RUC1169)
from
$49.99
Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.
Product Features:
See More
Product Features:
- Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
- Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
- Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
- Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor
Metrix – Blower Motor Resistor (Part No.R20321070359MTX)
from
$33.33
The Metrix Blower Motor Resistor is manufactured to meet or exceed the OE specifications for performance, fit and function.
Product Features:
See More
Product Features:
- Excellent electrical and thermal performance
- Direct OE replacement
- Built to strict quality control standards
- 100% tested
Carquest Premium – HVAC Blower Motor Resistor (Part No.RUC1759)
from
$52.99
Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.
Product Features:
See More
Product Features:
- Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
- Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
- Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
- Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor
DENSO – Blower Mtr Resistor (Part No.R20321070359ND)
from
$41.11
Blower Mtr Resistor
In-Demand Air Conditioning Parts for 1998 Isuzu Oases
Select from 16 premium Air Conditioning Parts parts for your 1998 Isuzu Oasis, with prices ranging from $10.99 to $367.99.
Factory Air – Cap & Valve A/C System Seal Kit (Part No.26783)
from
$17.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- All the seals needed to complete the job
- Compatible with both R12 and R134a refrigerants
- SUV and rear air applications
- Application specific
Carquest Premium – A/C Block Type Flange Expansion Valve (Part No.T38884)
from
$46.49
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
- Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
- Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
- O-Rings necessary for installation are included.
KAI – A/C Service Valve (Part No.FTT010751)
from
$10.99
New Standard Replacement A/C Service Cap And Valve Kit, MT2909
Product Features:
See More
Product Features:
- MT2909
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Carquest Premium – A/C Compressor Relay Connector (Part No.PTC1099)
from
$52.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
DENSO – First Time Fit A/C Expansion Valve (Part No.R1045118917ND)
from
$71.52
Denso manufactures an A/C Expansion Valve that is the same quality fit and performance of the OE Expansion Valve it replaces.
Product Features:
See More
Product Features:
- OEM Quality and Direct fit Application
- Designed to the exact OEM specifications
KAI – A/C Receiver Drier (Part No.ACM010157)
from
$16.99
New Standard Replacement A/C Receiver Drier
Product Features:
See More
Product Features:
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Carquest Premium – A/C New, with Clutch, with 10PA17C Compressor (Part No.T68315)
from
$308.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
- New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
- The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
- All new compressors must pass a helium leak test and pump up function test prior to packaging.
- O-Rings and gaskets necessary for installation are included.
Carquest Premium – A/C Condenser (Part No.6345)
from
$187.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.
Product Features:
See More
Product Features:
- This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
- The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
- Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
- Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
- All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
- We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
- Our condensers are manufactured from rigid design standards to fit OEM dimensions.
- Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
KAI – A/C System Seal Kit (Part No.FTT010045)
from
$15.99
New Standard Replacement A/C System Seal Kit, MT2560, L3 Engine
Product Features:
See More
Product Features:
- MT2560, L3 Engine
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Carquest Premium – A/C New, without Clutch, with 10PA17C Compressor (Part No.T58362)
from
$367.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
- New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
- The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
- All new compressors must pass a helium leak test and pump up function test prior to packaging.
- O-Rings and gaskets necessary for installation are included.
Carquest Standard – Reman Nippondenso 10PA17C Compressor w/ Clutch (Part No.DW67315)
from
$227.99
Carquest Standard compressors offer reliable, long-lasting performance for a leak-free, dependable repair.
Product Features:
See More
Product Features:
- Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function and durability
- All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
- All units have new seals, O-rings, gaskets and clutch bearings
- Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
Carquest Premium – A/C Plate and Fin Evaporator (Part No.T54978)
from
$178.99
Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.
Product Features:
See More
Product Features:
- The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
- The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
- The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
- The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
- O-Rings and gaskets necessary for installation are included.
MTC – MTC ABS Speed Sensor (Part No.N6030227535MTC)
from
$162.10
The MTC OE quality ABS speed sensor is engineered to the exact specifications of the vehicle manufacturer to ensure the replacement sensor is the same in quality and function as the part installed as original equipment.
Product Features:
See More
Product Features:
- OE quality direct fit application
- Manufactured to meet or exceed OE requirements and testing
- Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference
Santech – A/C O-Ring Kit (Part No.R1151317326SII)
from
$20.34
A/C O-Ring Kit
Autopart International Inc – A/C Receiver Drier (Part No.R10401964415API)
from
$19.08
A/C Receiver Drier
Carquest Premium – Aluminum Filter Drier w/ Pad Mount (Part No.T33596)
Top-Rated Cooling and Climate Controls Brands For Your 1998 Isuzu Oasis
Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 1998 Isuzu Oases. Below you’ll find some of our best rated Cooling and Climate Controls from Permatex, Carquest Premium, and Imperial, and more. Cooling and Climate Controls from these brands that fit a 1998 Oasis start at just $6.99 and are rated as high as 5 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.
Popular Permatex 1998 Isuzu Oasis Cooling and Climate Controls
When it comes to maintaining or upgrading your 1998 Isuzu Oasis, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Cooling and Climate Controls, specifically designed for the 1998 Isuzu Oasis. With over 3 Permatex brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $24.32. Plus, with over 295 customer reviews and an average rating of 5 stars, you can trust that our Permatex Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$26.99
$26.99
(7)
High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ
“it worked great,thank you marv and your crew.”
Popular Carquest Premium 1998 Isuzu Oasis Cooling and Climate Controls
Carquest Premium auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 1998 Isuzu Oasis owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 1998 Oasis, Advance Auto Parts carries a full inventory of 19 Carquest Premium Cooling and Climate Controls. Plus you will be keeping your Isuzu in peak condition while saving money because prices on these Carquest Premium Cooling and Climate Controls range from $14.79 to $367.99, plus, with more than 241 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.
FAQs for 1998 Isuzu Oasis Cooling and Climate Controls
Which Cooling and Climate Controls are best-sellers for 1998 Isuzu Oases?
Out of 71 Cooling and Climate Controls that fit 1998 Isuzu Oases, the following parts are the top sellers:
- Radiator Cap: 16 PSI (17110029) – $14.99
- Cap & Valve A/C System Seal Kit (15890310) – $17.99
- Coolant Fan Switch (10703907) – $35.99
What’s the price range for 1998 Isuzu Oasis Cooling and Climate Controls?
Cooling and Climate Control prices for the 1998 Isuzu Oasis start at $2.28 and go up to $367.99 for the most premium parts.
What’s the average price of a Cooling and Climate Control for a 1998 Isuzu Oasis?
The average price for Cooling and Climate Controls for the 1998 Isuzu Oasis is $55.78. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Cooling and Climate Controls for other Isuzu Oasis model years?
What are the cheapest Cooling and Climate Controls for my 1998 Isuzu Oasis?
The cheapest 1998 Isuzu Oasis Cooling and Climate Controls we carry in stock are:
- Water Outlet Gasket (10792950) – $2.28
- Water Pipe O-Ring (10792985) – $3.21
- Water Pump Gasket (10791599) – $3.46
- Engine Water Pump Gasket (20688831) – $3.79
- Engine Coolant Thermostat Gasket (10748524) – $3.80
What are the top-rated Cooling and Climate Controls that fit the 1998 Isuzu Oasis?
Out of 784 reviews by customers, our 1998 Isuzu Oasis Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 1998 Isuzu Oasis and their top-rated products:
- Engine Cooling Parts
- Sankei Switches Radiator Cap (10743822) – $11.27
- Engine Coolant Thermostat Housing Gasket (3504875) – $6.79
- Engine Water Pump: New, Gasket/Seals Included (3130177) – $49.99
- Blower Motor and Related Products
- Sankei Switches Radiator Cap (10743822) – $11.27
- Engine Coolant Thermostat Housing Gasket (3504875) – $6.79
- Engine Water Pump: New, Gasket/Seals Included (3130177) – $49.99
- Air Conditioning Parts
- Sankei Switches Radiator Cap (10743822) – $11.27
- Engine Coolant Thermostat Housing Gasket (3504875) – $6.79
- Engine Water Pump: New, Gasket/Seals Included (3130177) – $49.99
What types of Cooling and Climate Controls do you sell for my 1998 Isuzu Oasis?
As of 2/5/25, these are some of the most in-demand types of Cooling and Climate Controls for a 1998 Isuzu Oasis:
Can I get help with 1998 Isuzu Oasis Cooling and Climate Control orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Isuzu Cooling and Climate Controls and more.
What is your return policy for Isuzu Oasis Cooling and Climate Controls?
Advance Auto Parts keeps returns simple. For new Isuzu Oasis Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
