1998 GMC Yukon Engine Cooling Parts

Essential 1998 GMC Yukon Engine Cooling Parts

ACDelco – GM Original Equipment Expansion Tank Cap (Part No.G1040465619ACD)

GM Original Equipment Expansion Tank Cap

from

$21.02
An ACDelco GM Original Equipment Expansion Tank Cap is a spring loaded cap that seals the radiator filler neck or surge tank, and is a GM-recommended replacement for your vehicle’s original component. It maintains pressure on the cooling system while the engine is operating, which raises the boiling point of the engine coolant. It also replenishes the system with coolant from the expansion tank (if equipped) when the engine cools off. This original equipment radiator cap has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors. Get the GM quality you know and trust with ACDelco GM Original Equipment Thermostats and Caps. Stay with the brand of parts your General Motors vehicle came with and get peace of mind that the fit, form, and function is up to the high standards and specifications of General Motors. ACDelco GM Original Equipment Thermostats and Caps are engineered for virtually every model of GM car, light duty truck, and sport utility vehicle.

Product Features:
  • Seal and maintain pressure on the cooling system for vehicle safety
  • Raise the boiling point of the engine coolant to maintain efficiency
  • Fit most models of GM vehicles for expanded coverage
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – Coolant Temperature Sensor (Part No.WTC1002)

Coolant Temperature Sensor

from

$20.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Felpro – Engine Water Pump Gasket (Part No.36109)

Engine Water Pump Gasket

from

$19.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Carquest Premium – COOLANT HOUSING (Part No.CH5169)

COOLANT HOUSING

from

$13.99
COOLANT HOUSING

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

from

$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

ACDelco – GM Original Equipment Engine Cooling Fan Clutch (Part No.G5010446142ACD)

GM Original Equipment Engine Cooling Fan Clutch

from

$527.76
ACDelco GM Original Equipment Engine Cooling Fan Clutches control the speed of the radiator fan based on the temperature of the air after it passes through the radiator fins. This original equipment engine cooling fan clutch is a GM-recommended replacement for your vehicle’s original components and has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Quiets noisy cooling fans with stuck fan clutches, restores fuel economy
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – Radiator Cap Tester Adapter (Part No.12552)

Radiator Cap Tester Adapter

from

$14.29
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:
  • Machined metal construction
  • Works with MT-300 pressure tester
  • Tests coolant caps
  • Professional quality
See More

Dorman – Water Pump Mounting Hardware Kit (Part No.902-804)

Water Pump Mounting Hardware Kit

from

$14.99
This engine water pump stud kit is designed to match the original hardware required to repair the water pump on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this engine water pump stud kit is designed to match the original hardware required to repair the water pump on specified vehicles.
  • Ideal solution – this kit is a reliable replacement for original hardware that is missing or damaged.
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Koyo Cooling – Radiator (Part No.G1000142063KCS)

Radiator

from

$285.11
Plastic Tank / Aluminum Core Radiator Koyo radiators are available in plastic tank and aluminum core. The Nocolok brazing line keeps the highest quality standards, bringing you superior products you can rely on. The Koyo Cooling radiator has been engineered to the highest standards and incorporates application specific mounting locations for all fan shrouds, inlet-outlet hoses and top-bottom mounting pins, ensuring quick and pain-free installs.

Product Features:
  • All Aluminum Core and Plastic Tank
  • OE Style mounting brackets and hose connections
  • Integrated transmission oil cooler when applicable
  • Compact and lightweight
See More

Imperial – Electric Fan – 14" Diameter (Part No.226114)

Electric Fan - 14" Diameter

from

$99.99
Product Features:
  • Motors built and tested to quality specifications
  • 14 in. universal fit reversible fan
  • 1250 CFM
  • UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
See More

Motorad – Thermostat Kit: Includes Inlet, Thermostat and Seal, 187 Degrees (Part No.524KT)

Thermostat Kit: Includes Inlet, Thermostat and Seal, 187 Degrees

from

$45.49
Kit includes thermostat, housing, and all necessary seals/gaskets to do the complete job. These individual parts are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat and housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

ACDelco – Relay (Part No.P2020846897ACD)

Relay

from

$110.00
Relay

Dorman – Radiator Fan Assembly: Dual, Brushless Motor, Cost Effective & Reliable (Part No.621-619)

Radiator Fan Assembly: Dual, Brushless Motor, Cost Effective & Reliable

from

$684.99
This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Product Features:
  • Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles.
  • Complete package – assembly is designed with the same materials and components as the original part.
  • Quality assured – motors are tested in laboratory settings to ensure performance
  • Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership
See More

Imperial – Thermostatic Fan Control – Adjustable (Part No.226208)

Thermostatic Fan Control - Adjustable

from

$62.99
Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:
  • Adjustable thermostatic fan control
  • 160°F – 210°F thread-in probe
  • For use with Imperial electric fans
  • Thread-in probe for installation in water jacket or radiator
See More

ACDelco – 15-10595 GM Original Equipment Engine Coolant Water Outlet (Part No.G4010349243ACD)

15-10595 GM Original Equipment Engine Coolant Water Outlet

from

$18.46
ACDelco GM Original Equipment Engine Coolant Water Outlets are housings that connect the radiator hoses to the engine, typically housing the engine coolant thermostat. For certain applications, the water outlet contains threaded holes or ports for sensors and switches. These original equipment engine coolant water outlets are GM-recommended replacements for your vehicle’s original components and have been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

ACDelco – 12587397 GM Original Equipment Engine Coolant Water Inlet Seal (Part No.G4030310258ACD)

12587397 GM Original Equipment Engine Coolant Water Inlet Seal

from

$10.84
An ACDelco GM Original Equipment Engine Coolant Water Inlet Seal is a GM-recommended replacement for your vehicle’s original component. It seals and helps prevent coolant from leaking out of cooling system components. This original equipment engine coolant water inlet seal has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Seals and helps prevent coolant from leaking out of cooling system components to maintain the proper engine temperature
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

KAI – Coolant Reservoir (Part No.GM3014113)

Coolant Reservoir

from

$36.99
New Platinum Pro Coolant Recovery Tank, With Cap

Product Features:
  • With Cap, Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Clutch Fan Blade: Plastic, Cost Effective And Reliable (Part No.621-104)

Clutch Fan Blade: Plastic, Cost Effective And Reliable

from

$61.99
Replace your damaged cooling fan blade with this direct replacement. This vehicle-specific application is engineered for a perfect fit and is made from quality materials to ensure durability and restore proper cooling system operation.

Product Features:
  • Direct replacement – this engine cooling fan blade fits and functions like the original equipment fan blade.
  • Quality construction – manufactured from premium materials for a long service life.
  • Excellent value – original equipment quality at a lower price
  • Quality tested – has undergone testing to ensure proper fit and performance
See More

Victor Reinz – Engine Water Pump Installation Kit (Part No.18-10020-01)

Engine Water Pump Installation Kit

from

$9.49
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Felpro – Engine Water Pump Gasket (Part No.13032)

Engine Water Pump Gasket

from

$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

ACDelco – GM Original Equipment Engine Coolant Thermostat (Part No.G4000202671ACD)

GM Original Equipment Engine Coolant Thermostat

from

$28.42
An ACDelco GM Original Equipment Engine Coolant Thermostat is a temperature controlled valve located in the engine coolant outlet to, or the inlet from, the radiator, and is a GM-recommended replacement for your vehicle’s original component. It controls the flow of coolant through the radiator to enable the engine to reach and maintain its normal operating temperature. This original equipment engine coolant thermostat has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Control the flow of coolant through the radiator to enable the engine to reach and maintain its normal operating temperature
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Felpro – Engine Water Pump Gasket (Part No.36110)

Engine Water Pump Gasket

from

$7.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

US MOTOR WORKS – Water Pump with Fan Clutch (Part No.MCK1037)

Water Pump with Fan Clutch

from

$102.99
US Motor Works Professional Series Water Pump with Fan Clutch are designed to replace the mechanical components of a cooling system. A proper water pump replacement should include a new fan clutch as the two are connected to the same shaft and work together to move the air and cooling fluid. Replacing one without the other can damage the new part and cause repeat work or engine trouble. This matched set will allow your vehicle continued operation in the demanding environment of today’s engine. All components are brand new and QA inspected for perfect fit and function. Restore your cooling power by installing a US Motor Works Professional Series Water Pump with Fan Clutch.

Product Features:
  • Fan clutch mounts to the water pump and should be replaced at the same time.
  • Matched set for proper water pump or fan clutch replacement
  • Includes mounting hardware, gaskets and accessories as required.
  • Complete mechanical cooling parts replacement
  • Factory tested and 100% new product
  • Meets or exceeds OEM quality
See More

Felpro – Multi-Purpose O-Ring (Part No.35710)

Multi-Purpose O-Ring

from

$3.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Dorman – Help – Drain Cock-Brass-Screw In Style-1/8 In. NPT (Part No.61103)

Drain Cock-Brass-Screw In Style-1/8 In. NPT

from

$2.99
This radiator drain petcock is a direct replacement for the original equipment plug that may have deteriorated or corroded. Made of quality materials, this petcock is engineered to strict standards for durable use over time.

Product Features:
  • Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part.
  • Durable construction – this part is made of quality materials for a long service life
  • Saves money – offers original equipment quality at a competitive price
  • Quality assured – this petcock has undergone virtual testing to assure proper fit and function
See More

Carquest Premium – Engine Cooling Fan Switch Connector (Part No.PTA1441)

Engine Cooling Fan Switch Connector

from

$22.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

KAI – Cooling Fan Shroud (Part No.GM3110135)

Cooling Fan Shroud

from

$29.99
New Platinum Pro Upper Fan Shroud, With Rear Air Conditioning

Product Features:
  • With Rear Air Conditioning
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Driveworks Water Pumps – New Water Pump (Part No.58-521)

New Water Pump

from

$57.99
This replacement engine water pump is leak and flow tested. Gaskets and seals are included where applicable.

Product Features:
  • This pump is used on accessory belt driven applications
  • Used mostly on models equipped with a fan clutch
  • It is highly recommended that the fan clutch be replaced with the water pump
  • All gaskets or seals necessary for installation are supplied with pump
  • Durable housing features precisely machined mounting surfaces for proper sealing
See More

1998 GMC Yukon Engine Cooling Parts

Maybe you’re in the middle of a full rebuild of that 1998 GMC Yukon. Maybe you just need a couple of Engine Cooling Parts. Either way, Advance Auto Parts has 71 different Engine Cooling Parts in our inventory ranging from $2.04 to $787.49. That means you can find the exact parts or products you need to keep that 1998 GMC Yukon running smoothly.

Engine Cooling Parts are only as good as their brand. We stock 20 different brands to make sure you have plenty of trusted parts to choose from for your 1998 GMC Yukon. Carquest Premium, Permatex, and FELPRO are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Engine Cooling Parts for your 1998 GMC Yukon, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 1,820 reviews in this category, some of the top rated parts include Radiator: With Engine and Transmission Oil Coolers with 4.2 stars and Engine Cooling Fan Clutch: Reverse Rotation Severe Duty Thermal Clutch with 4.4 stars.

So if you’re in the market for aftermarket Engine Cooling Parts to keep your 1998 GMC Yukon rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Engine Cooling Parts Brands To Make Your 1998 GMC Yukon Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1998 GMC Yukon demands trusted brand parts and products to keep it running. Many trusted brands of Engine Cooling Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Yukon the best it can be. Be sure to browse some of our top Engine Cooling Parts brands and parts.

FAQs for 1998 GMC Yukon Engine Cooling Parts

What are the most purchased Engine Cooling Parts for the 1998 GMC Yukon?

Out of 71 Engine Cooling Parts for the 1998 GMC Yukon, the most popular in our inventory are:
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from $6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Water Pump Housing Gaskets
Engine Water Pump Gasket
from $2.99
(68)
Engine Water Pump Gasket
Water Pump Gaskets

What are the top-rated 1998 GMC Yukon Engine Cooling Parts?

Top-rated Engine Cooling Parts for your 1998 GMC Yukon based on customer reviews/ratings are:
Radiator: With Engine and Transmission Oil Coolers
from $227.99
(137)
Radiator: With Engine and Transmission Oil Coolers
“The radiator was fine.”
Engine Cooling Fan Clutch: Reverse Rotation Severe Duty Thermal Clutch
from $95.99
(129)
Engine Cooling Fan Clutch: Reverse Rotation Severe Duty Thermal Clutch
“Works great. No issues so far”
New Water Pump
from $57.99
(120)
New Water Pump
“Perfect fit, good part at a good price.”