1998 GMC C3500 Performance and Racing Products

Name: Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts
Brand: FEL-PRO Performance
SKU: 1003
Price: 42.49 USD
Rating: 5.0 (1 reviews)

Below you will find various in-demand GMC Performance and Racing Products, components and accessories for your 1998 C3500. Advance Auto Parts has popular C3500 parts like Performance Steering Products, Performance Exhaust Products, Performance Ignition Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other C3500 model years including 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1999 and more. Select a category of 1998 GMC C3500 Performance and Racing Products below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1998 GMC C3500 Performance and Racing Products Categories

Performance Coils

Performance Air Intake Kits

Performance Exhaust Mufflers

Performance Distributor Cap and Rotor Kits

Performance Exhaust Headers

Engine Cold Air Intakes

Performance Shifters

Performance Distributors

Performance Valve Covers

Performance Body Mounts

Performance Engine and Transmission Mounts

Performance Engine Water Pumps

Performance Radiator Caps

Performance Engine Cylinder Head Gaskets

Performance Engine Camshaft and Lifter Kits

Performance Distributor Rotors

Performance Engine Intake Manifold Gaskets

Performance Engine Valve Springs

Performance Engine Valve Cover Gasket Sets

Performance Spark Plug Wires

Performance Exhaust Manifold Gaskets

Performance Posi Units and Components

Performance Leaf Spring Bushings

Performance Chassis Bump Stops

Performance Engine Rocker Arms

Performance Engine Camshafts

Performance Engine Oil Pan Gaskets

Performance Ring and Pinions

Performance Ignition Parts

Performance Sway Bar Link Kits

Performance Lower Control Arm Bushings

Performance Sway Bar Bushings

Performance Engine Main Bearing Gasket Sets

Performance Tie Rod End Boots

Performance Shock Mount Kits

Performance Ball Joint Boots

Performance Engine Timing Cover Gasket Sets

Performance Engine Push Rods

Performance Brake Hose Kits

Performance Engine Valve Spring Retainer

Performance Nitrous Systems

Performance Engine Valve Stem Seal Sets

Essential Performance and Racing Products for 1998 GMC C3500s

from

$42.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$5.99

Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$10.99

Easy to Install
Superior Material
Lasts Longer
Looks Great

from

$60.99

Ultra-Seal intake manifold gaskets are manufactured from cellulose/nitrile composition gasket material. Provides excellent sealing and durability. Incorporates Silicone beading around each intake and water outlet port to provide additional sealing strength on both sides of each gasket. No gasket sealer required. For OE replacement, high performance street, drag race and oval track use. Includes manifold end seals and distributor gasket.

Product Features:

Manufactured from cellulose/nitrile composition gasket material
Provides excellent sealing and durability
Silicone beading on both sides of each gasket
Complete with manifold end seals and distributor gasket
For OE replacement, high performance street, drag race and oval track use
Creates Tight Leak proof Seal

from

$99.99

Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

Product Features:

Made of Superior Hyper-Flex+ Material
Adds Dramatic Amount of Performance/Durability
Helps Vehicle Be in Control
Allows the Suspension to Function Properly

from

$35.99

If you are changing your camshaft or replacing the timing set, make sure to replace this seal at the same time! Made from Nitrile rubber.

Product Features:

Nitrile Rubber And High Density Cork
Will Not Shrink Or Stick

from

$50.99

A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.

Product Features:

Gains Both Performance and Longevity
Will Handle Any and All Torque
Out Lasts Rubber

from

$44.49

Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.

Product Features:

Has A Steel Core With Graphite Facing
Graphite Facing Has Excellent Thermo-conductivity
Can Be Trimmed If Necessary For Modified Port App

from

$124.99

Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:

For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.

from

$59.99

The Edelbrock #4443 Signature Series Valve Covers are designed for Chevrolet 262-400 ’59-86 applications. Engineered for function and styled for great looks, Signature Series valve covers have stock-style breather baffles that prevent oil passage to the PCV valve. These quality valve covers accept all emissions equipment, including PCV valve holes. Rubber grommets for the breather and PCV valve holes are included. Matching breathers sold separately.

Product Features:

Small Block Chevy 262-400 1959-86
Short
Black Steel
Set Of Two
Matching breathers sold separately.

from

$306.99

Reverse lockout meets NHRA and IHRA requirements. Includes neutral safety switch, backup light switch, black T-Handle. Fits most 3 Speed applications.

Product Features:

Base Trims To Custom Fit Floor
NHRA/IHRA Reverse Lockout Meets Requirements
Includes Neutral Safety Switch
Includes Backup Light Switch
Includes Black T-Handle and Cable

from

$351.99

RngPnn

from

$156.99

Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:

Assures Longer Lasting Cab to Bed Alignment
Replace to Restore Ride Height
Gain Durability
Stronger Than Original Rubber Mounts

from

$549.99

Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,

Product Features:

Excellent performance in street fuel injected applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$85.99

When it comes to late model performance parts, nothing beats bolt-on and direct connection components. These new bolt-in coils are designed with improved materials and windings to produce a stronger output. GM single connector coil PN 8231. Used on 1996 to 1999 General Motors vehicles. Installation tip: if you plan to install an MSD Ignition with this coil, use a PN 8877 harness for a direct plug-in installation.

Product Features:

Direct performance replacement coil for GM 1996-1999
80:1 turns ratio
Lower Primary Resistance Produces High Voltage Output
Works w/Stock Ignition As Well As MSD Ignitions

from

$28.49

This Mr. Gasket Rear Main Seal is made from silicone to allow the seal to handle extreme engine oil temperature. It also provides for an upgrade for that leaky rope style seal and is a direct replacement for a rubber main seal. It’s also injection molded for a precise fit.

Product Features:

Repairs That Leaky Rear Main Sail
Silicone Rubber to Withstand Extreme Engine Oil Temperatures
Upgrade for Rope Seal Equipped Cars or Direct Replacement for Rubber Main Seal
Injection Molded for Precise Fit

from

$51.99

Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$314.99

The K&N 57-3014 FIPK air intake system replaces the restrictive factory air filter and air box. K&N intakes are designed to dramatically reduce intake restriction and improve air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 57-3014 air intake comes with a large, round chrome topped K&N high-flow air filter assembly that installs onto the throttle body within the previous air cleaner space. Air is directed through the air filter into the engine’s throttle body for a guaranteed power gain. The oversized air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 60 minutes or less using existing factory mounting points accommodating the factory crank case vent line. The tools needed are a screwdriver, a ratchet set and an 8 millimeter wrench. K&N 57 Series FIPK’s are street legal in all 50 US states and come with K&N’s No-Hassle Lifetime Limited Warranty.

Product Features:

Guaranteed to increase horsepower
Designed to improve throttle response and engine sound
Easy to install, usually in 60 minutes or less
Washable and reusable lifetime air filter
Lasts up to 100,000 miles before service is required (depending on driving conditions)
Replaces entire factory air intake system
DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
HIGH QUALITY: Made in America.

from

$62.99

The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.

Product Features:

Helically wound conductor suppresses electro and radio noise
Kevlar core combination for great strength and durability
Heavy Duty Terminals For Secure Connection
8mm silicone and synthetic jacket resists heat and abrasion
500 Ohms/ft. Resistance For Improved Spark Delivery And Power
Silicone Boots Protect Against High Exhaust Temps

from

$95.99

Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:

Service Part
No Moving Parts To Wear Out
Self Contained Unit
Can Drive OEM
Can Drive High Performance Ignition Coils

from

$101.99

Mr. Gasket competition screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street and race applications.

Product Features:

Black Oxide Coated Grade 8 Steel
Kit Contains 16 Studs
Easy To Install
Heat Treated Steel
Prevents Stud Flexing
Black Plated Finish

from

$12.29

Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Hyper-Flex performance polyurethane bump stops for control arms, traction bars, leaf springs, etc. are guaranteed to last longer and operate more efficiently than original rubber stops. The smaller, general purpose bullet shaped snubber is ideal for control arms. the low profile button head is for use when clearance is limited. Our large competition race style bump stops smooth out compression better and have a large reinforced metal plate welded to the mounting plate and molded-in. Each style is specially designed for a perfect and custom fit and each style has it’s own durometer, hardness, characteristics. Energy’s wide selection of bump stops are available in red or black color.

Product Features:

Made of Superior Hyper-Flex+ Material
Helps Prevent Damage to Control Arm

from

$1300.99

Hooker Truck Force Headers are designed to be a high performance alternative to the stock O.E. manifolds on 2 wheel and 4 wheel drive trucks. These headers are built to accommodate all emission control devices. Please check your application in this section for more information regarding emissions legality.

Product Features:

Long Tube Lengths
Long Transition Collectors
Monstrous Low-Mid Range Torque
Keep Top End Horsepower
Provides Finest Fit
Most Durable Design Available

from

$268.99

Everything you need to Super Tune Up your truck, van, or Jeep engine! The kits includes a high performance cap and rotor. A set of 8mm Extreme 9000 Spiral Core wires. This kit also includes the ACCEL classic copper core spark plugs to fire your engine up.

Product Features:

Includes Everything Needed
Resistance High Dielectric Strength Compounds
Race Proven
Improved Performance
Reduced Emissions

from

$93.99

Russell’s wide variety of lightweight aluminum adapter fittings allow for the connection of Russell hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel f

from

$457.99

Edelbrock #8827 Water Pump small block Chevy cartridge style race ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these “super cooling

Product Features:

Standard Impeller Rotation
0.750 in. Pilot Shaft
0.750 in. Ball/Ball Bearing
5.8125 in. Block To Hub Height
Satin Finish

from

$94.99

For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$305.99

SMALL BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – Xtreme Energy: Great for street machines, largest cam for stock converter, better with 2000 stall.

Product Features:

Cam and lifter kit for Small Block Chevy engines
CL-Kit includes cam, lifters, assembly lube, instructions and decals
HYDRAULIC – Xtreme Energy: Great for street machines, largest cam for stock converter, better with 2000 stall.
268/280 Advertised Duration, 224/230 Duration @ .050″, .477″/.480″ Lift, 110 Lobe Separation
Valve spring upgrade required

Upgrade your 1998 GMC C3500 with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1998 GMC C3500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Performance and Racing Products are key to keeping your C3500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 108 Performance and Racing Products for the 1998 GMC C3500, designed to meet your needs without breaking the bank. From Performance Steering Product replacements to Performance Exhaust Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1998 GMC C3500 at great prices. Our Performance and Racing Products inventory for this model ranges from just $5.99 to $1,300.99, with an average price of $141.43. Our 108 Performance and Racing Products in stock come from 18 trusted brands, so you’re sure to find the right part for your 1998 GMC C3500 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1998 GMC C3500, we stock popular OEM and aftermarket Performance and Racing Products from top names like Energy Suspension, FEL-PRO Performance, MSD Ignition, and more. Energy Suspension Performance and Racing Products start at just $5.99 and boast an impressive 4.4 stars average rating from customers. FEL-PRO Performance and MSD Ignition also bring quality to the table, with Performance and Racing Products available starting at $31.49, and at an average 4.2 stars rating. With 423 customer reviews and counting, our 1998 GMC C3500 Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1998 GMC C3500 is always ready to roll. We’re committed to providing you with everything you need to keep your C3500 in top shape, all in one place. Start shopping confidently below for your 1998 GMC C3500!

Best-Selling Performance Steering Products for 1998 GMC C3500s

Enhance the driving experience in your GMC with 10 quality Performance Steering Product components, starting at $5.99.

show more show less

from

$5.99

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$121.99

Assures Longer Lasting Cab to Bed Alignment
Replace to Restore Ride Height
Gain Durability
Stronger Than Original Rubber Mounts

from

$5.99

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$54.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$43.49

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$43.49

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$6.29

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$121.99

Assures Longer Lasting Cab to Bed Alignment
Replace to Restore Ride Height
Gain Durability
Stronger Than Original Rubber Mounts

from

$157.99

Assures Longer Lasting Cab to Bed Alignment
Replace to Restore Ride Height
Gain Durability
Stronger Than Original Rubber Mounts

from

$157.99

Assures Longer Lasting Cab to Bed Alignment
Replace to Restore Ride Height
Gain Durability
Stronger Than Original Rubber Mounts

Most Popular 1998 GMC C3500 Performance Exhaust Products

Customize your GMC with 11 Performance Exhaust Products products like Performance Exhaust Mufflers, Performance Exhaust Manifold Gaskets, and Performance Exhaust Headers, all priced under $1,300.99.

show more show less

from

$31.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
Slotted bolt holes allow for easier header installation.
Not intended for use in emission controlled vehicles.

from

$357.99

Product Features:

Bolt On Quickly And Easily
Top Performance/Clean Machine
Increased Efficiency
Leak Free Seal
Connects To Exhaust Head Pipe
Complete With Premium Gaskets
16-Gauge Tubing For Durability

from

$26.49

Hooker’s precision-matched Super Competition header gaskets provide a sure fit and unmatched exhaust sealing. This OEM quality gasket is constructed of a thick ,.060 inch, high temperature, non-asbestos fiber laminate with a perforated steel core, which provides a superior grip and adhesion. This construction also contributes to exact fit compliance between the cylinder head and header flange, offering excellent sealing properties during extreme temperature and operating conditions.

Product Features:

Tear Resistant
Precisely Cut To Match Header

from

$152.99

The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$45.49

Withstands Intense Exhaust Heat
Graphite-Impregnated Facing
Steel Expanded Metal Core
Superior Tensile Strength
Resists Deteriorating
Anti-stick Properties
Easy Removal For Disassembly

from

$42.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
Slotted bolt holes allow for easier header installation.
Not intended for use in emission controlled vehicles.

from

$37.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
Slotted bolt holes allow for easier header installation.
Not intended for use in emission controlled vehicles.

from

$204.99

The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$1300.99

Long Tube Lengths
Long Transition Collectors
Monstrous Low-Mid Range Torque
Keep Top End Horsepower
Provides Finest Fit
Most Durable Design Available

from

$306.99

The 50 Series Big Block muffler is made for more than just big cubic inch engine applications. Its large case size with internal tuning chamber provides mileage and power gains along with maximum sound control for a quiet interior tone, even under heavy loads. Well suited to heavy duty vehicles such as full size trucks, SUV’s, RVs, and tow vehicles. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$169.99

The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

Product Features:

Durable fully welded 409 stainless steel
Deep aggressive exhaust note
Noticeable interior resonance
Excellent performance on high horsepower vehicles
No internal packing to blowout

Top Picks for 1998 GMC C3500 Performance Ignition Products

Upgrade GMC C3500s with top-quality Performance Ignition Products parts, including 7 OEM and aftermarket selections for your 1998 model.

show more show less

from

$219.99

The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:

Bolt-on Performance
Custom Fit For Make And Model Listed
Wires Are Pre-Cut To Exact Specifications
Conductor core features DuPont Kevlar material for increased tensile strength
Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately

from

$95.99

Service Part
No Moving Parts To Wear Out
Self Contained Unit
Can Drive OEM
Can Drive High Performance Ignition Coils

from

$79.99

Top off your GM ignition system with these great new replacement coils. The GM coils have MSD performance in factory style housings. MSD designed these coils by combining our blaster coil experience with e-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The coils will work with stock ignition systems as well as MSD equipped cars and trucks. Installation tip: If you plan to install an MSD ignition with your GM dual connector coil, use PN 8876 harness for a direct plug-in installation.

Product Features:

Direct performance replacement for GM dual connector coil
100:1 Turns Ratio
Lower Primary Resistance Produces High Voltage Output
Works w/Stock Ignition As Well As MSD Ignitions

from

$73.99

These new coils mount directly in place of the factory coils and accept the factory connectors. Spark energy is increased thanks to improved materials and windings that were spec’d by MSD engineering.

Product Features:

Replacement Coil For GM Dual Connector Coil
Improved Turns Ratio
Lower Primary Resistance
Bolt-In replacement coil
Produce More Output Voltage
Smooth Idle

from

$85.99

Direct performance replacement coil for GM 1996-1999
80:1 turns ratio
Lower Primary Resistance Produces High Voltage Output
Works w/Stock Ignition As Well As MSD Ignitions

from

$34.49

Product Features:

Service Part
Makes Connections Quick And Easy

from

$204.99

Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:

Glass Filled Polyester Case
Longer Spark Duration
Increased Performance
No Energy Loss Due To Arcing
Includes Brass Contact Terminal

In-Demand Performance Engines for 1998 GMC C3500s

Select from 38 premium Performance Engines parts for your 1998 GMC C3500, with prices ranging from $8.99 to $561.99.

show more show less

from

$42.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$44.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
Raises combustion sealing force to roughly three times that of standard head gaskets.
Steel wire rings for the greatest combustion seal strength.
Not intended for use in emission controlled vehicles.

from

$64.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$31.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
Not intended for use in emission controlled vehicles.

from

$51.99

These are high quality gaskets that works well on those hard to seal applications. The low density fiber & rubber blend gasket material seals those minor head imperfections with a low clamp force. At .312 inch, the extra thickness can also offer slightly more clearance for roller rockers. Ideal for all those high performance applications where you take the valve covers off and on a lot, and sticking is a problem.brbrFits all 1965-2000 Chevy Big Blocks: 366,396,402,427,454 including GM (General Motors) Gen VI Crate Engines like the 502 and 572.

Product Features:

These Are A Cork Rubber Blend
Extra Thick 5/16 In Creates Positive Seal
Also Available In Standard Thickness
For OE Replacement And High Performance Apps

from

$47.99

Product Features:

Clean Positive Seal
Embossed Silicone Bead Surrounding The Port
Matched To Manifolds And Cylinder Heads

from

$33.99

COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.

Product Features:

Work with .530″ guides and 3/8″ valve stem diameter
Valve stem oil seals keep unwanted oil from entering the combustion chamber
Several different types of valve seals are offered

from

$33.99

Spectre’s Valve Cover Gasket is designed using extra thick rubber and a steel reinforced core. Engineered for optimum fit and function, this valve cover gasket provides superior sealing and stops leaks.

Product Features:

Extra thick rubber
Steel core reinforced
Superior sealing
Stops leaks

from

$23.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Die cut silicone rubber gaskets conform to out-of-flat covers
Great for on-again/off-again situations
Not intended for use in emission controlled vehicles.

from

$27.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$35.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Rigid core, molded silicone rubber gaskets utilize the one-piece molded rubber technology for a perfect fit, ease of installation and include compression limiters to prevent overtightening.
Not intended for use in emission controlled vehicles.

from

$42.99

These are high quality gaskets that works well on those hard to seal applications. The low density fiber & rubber blend gasket material seals those minor head imperfections with a low clamp force. At .187 inch, the extra thickness can also offer slightly more clearance for roller rockers. Ideal for all those high performance applications where you take the valve covers off and on a lot, and sticking is a problem.brbrFits all 1965-2000 Chevy Big Blocks: 366,396,402,427,454 including GM (General Motors) Gen VI Crate Engines like the 502 and 572.

Product Features:

Manufactured from high-density cork/rubber blend gasket material
A black latex rubber coating is applied to the outside of gasket to help seal minor flange irregularities and eliminate the possibility of oil leakage
Creates a positive seal by controlled swelling of the gasket material when exposed to hot engine oil.
For OE replacement, high performance street, drag race and oval track use.
.187″ thick for additonal valve train clearance
Handles Ex Flange Pressure
Forms Leak Proof Seal
Black Latex Coating

from

$51.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$51.99

Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. This is a low density material that conforms well to irregular surfaces and has very good crush resistance at high flange pressures. They provide excellent sealing and durability as the material is designed for sealing gasoline, oils, water and coolant in applications up to 350 degrees Fahrenheit. While die-cut for an excellent fit, they can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track.

Product Features:

Manufactured from cellulose/nitrile composition gasket material
Provides excellent sealing and durability
Die-cut for an excellent fit
Can be trimmed if necessary for modified port applications
For OE replacement, high performance street, drag race and oval track use

from

$25.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Die cut silicone rubber gaskets conform to out-of-flat covers
Great for on-again/off-again situations
Not intended for use in emission controlled vehicles.

from

$329.99

Product Features:

Designed for Optimum Torque and Acceleration
Maximum Performance From Idle through Mid-Range
Matched to Edelbrock Performer Intakes
Includes Hydraulic Lifters and Assembly Lube
Major Improvement in Throttle Response and Torque
Use For Daily Drivers/Trucks/Vans/RVs/4x4s
Take The Guesswork Out Of Camshaft Selection

from

$53.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
SUPERIOR SEAL – Precise embossed Printo seal sealing beads at all vital areas to eliminate leak paths
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$35.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$35.99

If you are changing your camshaft or replacing the timing set, make sure to replace this seal at the same time! Made from Nitrile rubber.

Product Features:

Nitrile Rubber And High Density Cork
Will Not Shrink Or Stick

Magnum 1.72 Rocker and HE Pushrod Kit for Retro-Fit Roller BBC GEN VI BBC

from

$561.99

Magnum 1.72 Rocker and HE Pushrod Kit for Retro-Fit Roller BBC GEN VI BBC

from

$549.99

Excellent performance in street fuel injected applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$549.99

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$549.99

Excellent performance in street fuel injected applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$512.99

Maximum cooling for street and racing engines. Internal passages are balanced for maximum flow. Impeller is larger than others for maximum pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of block. Only flows in one direction for optimum efficiency. In the early days of the automotive performance industry, you either ran what was available, or you fabricated something you thought met your needs. Such needs were the building blocks of this industry, and it was through the efforts of many that we have the automotive aftermarket, but it was through the work of one name in particular to which many in the industry owe a great debt, and that name is Edelbrock.

Product Features:

Maximum Cooling for Street and Racing Engines
Internal Passages Are Balanced for Maximum Flow
Impeller is Larger than Others For Max Pressure
Impeller Vanes Dramatically Increase Flow Rates
Equal Distribution to Both Sides of Block
Only Flows in One-Direction for Optimum Efficiency

Most Sold 1998 GMC C3500 Performance Distributors

Explore our best-selling GMC parts for the 1998 C3500 among 4 OEM and aftermarket options starting from $32.99.

show more show less

from

$32.99

ACCEL Hi-Performance rotors offer superior protection from arc-thru and crossfire. Features hi-performance 60,000 volt alkyd compound, stress-relieved at molding to ensure stability and resist centrifugal forces at high racing RPMs.

Product Features:

Max stability for all RPM ranges
Heavy duty for maximum energy transfer
Fits Most Stock And Modified Distributors
Polyester Glass Filled For Durability

from

$263.99

Complete Super Tune Kit
8mm Spiral Core Wires
Accel Classic Core Plugs
High Performance Cap And Rotor
Reduced Emissions

from

$511.99

The Pro-Billet Ready-to-Run distributor is the perfect upgrade for outdated points distributors or bulky HEI. Simply install the distributor in the engine, connect three wires, the coil and fire it up! A maintenance-free magnetic pick-up accurately triggers the module. The increased output of the amplifier easily outperforms stock ignitions and will smooth out the engine’s idle, improve starting and provide a much higher RPM range. The Ready-to-Run features MSD’s adjustable mechanical advance which allows you to custom tailor an ignition curve to match your engine’s needs. There is also a vacuum advance canister to help improve economy. For positive street performance, the Ready-to-Run is the best choice.

Product Features:

Simple and clean three wire installation
Supplied w/An HEI Style Distributor Cap And Rotor
Accepts Cap-A-Dapts
Does not require an MSD Ignition Control
CARB E.O. Approved
Now includes built-in Rev Limiter
O-ring seals can be installed for oil press. control (Mods only)
Special oil tract improves lubrication to the dist./cam gear

from

$306.99

Fits 1996-00 7.4 V8 Vortec engines. Includes everything you need to Super Tune your pickup truck, van and SUV! All kits consist of matched ACCEL custom fit wire set, ACCEL distributor cap & rotor and get the ACCEL U-Groove spark plugs…FREE. Kits include 8mm custom fit Extreme 9000 wire set with Heat reflective Coat sparkplug boots rated at 1200 degrees F, and Ferro-Spiral core. Some in-line 6cylinder applications use 5000 series wire set where extreme heat is not a problem. ACCEL uses the finest distributor cap and rotors available: precision molded in impact resistance high dielectric strength compounds. Most applications in tan with brass or copper inserts and stainless steel contact springs. Renowned, race-proven U-Groove copper core spark plugs are used to maximize burn efficiency for improved performance and reduced emissions. * Kits designated with the suffix HP are available with ACCEL Shorty Header Spark Plugs for added plug clearance on vehicles equipped with headers.

Product Features:

Includes everything you need to Super Tune your vehicle
Matched components for best reliability
Great for daily driver or extreme heavy duty use
Improved Performance
Reduced Emissions

Top-Rated Performance and Racing Products Brands For Your 1998 GMC C3500

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1998 GMC C3500s. Below you’ll find some of our best rated Performance and Racing Products from Energy Suspension, FEL-PRO Performance, and MSD Ignition, and more. Performance and Racing Products from these brands that fit a 1998 C3500 start at just $5.99 and are rated as high as 4.4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular Energy Suspension 1998 GMC C3500 Performance and Racing Products

When it comes to maintaining or upgrading your 1998 GMC C3500, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Energy Suspension ticks all of those boxes. We offer a wide selection of Energy Suspension Performance and Racing Products, specifically designed for the 1998 GMC C3500. With over 3 Energy Suspension brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $5.99, with an average price of just $21.59. Plus, with over 22 customer reviews and an average rating of 4.4 stars, you can trust that our Energy Suspension Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $12.29

(2)

Control Arm Bump Stop Set

“good quality part”

from $5.99

(3)

Tie Rod Dust Boot

“Replaced the old torn boot and added a bit of color for a low cost.”

from $46.49

(17)

High Performance Transmission Mount for Street & Racing Vehicles

“The best you can buy. Don’t be a cheap skate. Spend a little extra and get the good stuff. I used in 72′ chevy C-10. Has been restrored has 425 hp wit”

Popular FEL-PRO Performance 1998 GMC C3500 Performance and Racing Products

FEL-PRO Performance auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1998 GMC C3500 owner should feel confident when installing genuine FEL-PRO Performance parts in their vehicle. To ensure the best fit and performance for your 1998 C3500, Advance Auto Parts carries a full inventory of 3 FEL-PRO Performance Performance and Racing Products. Plus you will be keeping your GMC in peak condition while saving money because prices on these FEL-PRO Performance Performance and Racing Products range from $31.49 to $44.99, plus, with more than 4 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

from $44.99

(1)

Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

“Racing application”

from $31.49

(2)

Exhaust Manifold Gasket Set

“Appear to be A-OK on my Chevrolet as far as fitment”

from $42.49

(1)

Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

“Real good products”

FAQs for 1998 GMC C3500 Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1998 GMC C3500s?

Out of 108 Performance and Racing Products that fit 1998 GMC C3500s, the following parts are the top sellers:

High Performance Transmission Mount for Street & Racing Vehicles (16360003) – $46.49
Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (5189543) – $42.49
Coil; GM External HEI Coil; High Performance (17350179) – $79.99

What’s the price range for 1998 GMC C3500 Performance and Racing Products?

Performance and Racing Product prices for the 1998 GMC C3500 start at $5.99 and go up to $1,300.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1998 GMC C3500?

The average price for Performance and Racing Products for the 1998 GMC C3500 is $141.43. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other GMC C3500 model years?

Yes, we currently carry Performance and Racing Products for 18 model years of GMC C3500s between 1979 and 1999. Performance and Racing Products are bought most frequently for the following model years: 1999, 1997, 1996, 1995, 1994, 1993, 1992, 1991, and 1990.

What are the cheapest Performance and Racing Products for my 1998 GMC C3500?

The cheapest 1998 GMC C3500 Performance and Racing Products we carry in stock are:

Tie Rod Dust Boot (17360821) – $5.99
Tie Rod Dust Boot (17360833) – $5.99
Tie Rod Dust Boot (22906873) – $6.29
High Energy 8.684" Long, 3/8" Diameter Pushrod (50289273) – $8.99
Shock Bushing Set (22906613) – $9.99

What are the top-rated Performance and Racing Products that fit the 1998 GMC C3500?

Out of 423 reviews by customers, our 1998 GMC C3500 Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1998 GMC C3500 and their top-rated products:

Performance Radiators
- Thermocap Radiator Cap (6900022) – $53.99
Performance Air Intake Kits
- Thermocap Radiator Cap (6900022) – $53.99

What types of Performance and Racing Products do you sell for my 1998 GMC C3500?

As of 3/1/26, these are some of the most in-demand types of Performance and Racing Products for a 1998 GMC C3500:

Can I get help with 1998 GMC C3500 Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Performance and Racing Products and more.

What is your return policy for GMC C3500 Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new GMC C3500 Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1998 GMC C3500 Performance and Racing Products

FEL-PRO Performance – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.1003)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101G)

Energy Suspension – Ball Joint Dust Boot Set (Part No.9.13126R)

Mr. Gasket – Gskt Intake (Part No.5812)

Energy Suspension – Leaf Spring Bushing Set (Part No.3.2128R)

Mr. Gasket – Timing Cover Seal (Part No.17)

Energy Suspension – Motor Mount (Part No.3.1121G)

Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5911)

Richmond Gear – Differential Mini Spool (Part No.78-1028-1)

Edelbrock – Signature Series Valve Covers: Small Block Chevy 262-400 1959-86, Black Steel (Part No.4443)

B & M – Automatic Shifter, Z-Gate (Part No.80681)

Richmond Gear – RngPnn (Part No.69-0169-1)

Energy Suspension – Body Cab Mount Set (Part No.3.4140G)

Competition Cams – XE Computer Controlled 206/212 Hydraulic Roller Cam (Part No.01-410-8)

MSD Ignition – Coil; GM; External Single Connector; 96-97 (Part No.8231)

Mr. Gasket – Rear Main Seal Gasket (Part No.1960)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5177R)

K&N – Cold Air Intake: Adds Up To 18 Horsepower, With Washable Air Filter (Part No.57-3014)

MSD Ignition – Wire Set; Street Fire; Small Block Chevy 350; HEI (Part No.5554)

Mallory – Unilite Ignition Module (Part No.605)

Mr. Gasket – Ultra Seal: Competition Screw-In Rocker Arm Studs (Part No.1074)

Energy Suspension – Control Arm Bump Stop Set (Part No.3.9102G)

Hooker Headers – Truck Force; Emissions Compatible Header (Part No.2021-1HKR)

Accel – Tst GM 87-95 5.0/5.7L Tbi (Part No.TST4HP)

Russell – Street Legal, K1500 P/U w/4" lift (Part No.695700)

Edelbrock – Water Pump Cartridge for Small-Block Chevy (Race Style) (Part No.8827)

Energy Suspension – Control Arm Bushing Set (Part No.3.3147R)

Competition Cams – Xtreme Energy 224/230 Hydraulic Flat Cam and Lifter Kit (Part No.CL12-242-2)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

Energy Suspension – Hyper-Flex Polyurethane Body Cab Mount Set for Improved Ride and Durability (Part No.3.4123G)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101G)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5178G)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5136G)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5136R)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13102R)

Energy Suspension – Chevy Pickup Body Mount Set for Improved Ride and Durability (Part No.3.4123R)

Energy Suspension – Body Cab Mount Set (Part No.3.4121R)

Energy Suspension – Body Cab Mount Set (Part No.3.4121G)

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1444)

Flowtech – Shorty; Smog Headers (Part No.91832FLT)

Hooker Headers – Super Competition Header Gasket (Part No.10809HKR)

Flowmaster Inc. – Super 40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.953048)

Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5910)

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1411)

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1410)

Flowmaster Inc. – 50 Series Muffler, 3in Offset Inlet 3in Offset Outlet, 17in long, Non-Reversible, Moderate Sound (Part No.53058)

Hooker Headers – Truck Force; Emissions Compatible Header (Part No.2021-1HKR)

Flowmaster Inc. – 50 Series Muffler, 2.75in Dual Offset Inlet 2.5in Dual Offset Outlet, Non-Reversible, Mild Sound (Part No.527504)

Flowmaster Inc. – Super 40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.853048)

MSD Ignition – Wire Set; Super Conductor; Chevy Tahoe; Sub. Vortec V8; 96-97 (Part No.32169)

Mallory – Unilite Ignition Module (Part No.605)

MSD Ignition – Coil; GM External HEI Coil; High Performance (Part No.8226)

MSD Ignition – Direct-Fit Replacement Coil with Improved Energy Output and Easy Installation (Part No.5526)

MSD Ignition – Coil; GM; External Single Connector; 96-97 (Part No.8231)

Mallory – Distributor Wiring Harness (Part No.29349)

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

FEL-PRO Performance – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.1003)

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1004)

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1037)

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1603)

Mr. Gasket – Ultra Seal: Valve Cover Gasket Set (Part No.5863)

Edelbrock – Intake Manifold Gasket for E-Tec 170 Small-Block Chevy (Part No.7235)

Competition Cams – VALVE SEALS, TEFLON 3/8" 1 ST (Part No.505-16)

Spectre – Valve Cover Gasket Steel/Rubber Bbc (Part No.586)

FEL-PRO Performance – PERFORMANCE VALVE COVER GASKET SET (Part No.1602)

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 9 Piece Set (Part No.1212)

FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1866)

Mr. Gasket – Ultra Seal: Valve Cover Gasket Set (Part No.5862)

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1010)

Mr. Gasket – Intake Gasket (Part No.136G)

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1605)

Edelbrock – Performer-Plus Camshaft Kit for Big-Block Chevy 396-427-454 V8 (Part No.2162)

FEL-PRO Performance – Stainless steel core laminate Engine Cylinder Head Gasket (Part No.1047)

FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2920)

Mr. Gasket – Timing Cover Seal (Part No.17)

Competition Cams – Magnum 1.72 Rocker and HE Pushrod Kit for Retro-Fit Roller BBC GEN VI BBC (Part No.RPS302)

Competition Cams – XE Computer Controlled 206/212 Hydraulic Roller Cam (Part No.01-410-8)

Competition Cams – Xtreme Energy 224/230 Hydraulic Roller Cam (Part No.01-416-8)

Competition Cams – XE Computer Controlled 212/218 Hydraulic Roller Cam (Part No.01-412-8)