1998 GMC C1500 Belts and Hoses
Find Your Specific 1998 GMC C1500 Belts and Hoses
Below you will find various in-demand GMC Belts and Hoses, components and accessories for your 1998 C1500. Advance Auto Parts has popular C1500 parts like Serpentine and V Belts, Radiator Hoses, Belt Tensioners and more. You’ll also find aftermarket and OEM Belts and Hoses for other C1500 model years including
1990,
1991,
1992,
1993,
1994,
1995,
1996,
1997,
1999 and more. Select a category of 1998 GMC C1500 Belts and Hoses below and start saving instantly.
Popular 1998 GMC C1500 Belts and Hoses Categories
Essential Belts and Hoses for 1998 GMC C1500s
Gates – Gates Premium Molded Coolant Hose, 21204 (Part No.21204)
from
$28.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
See More
Gates – Gates DriveAlign Belt Drive Idler/Tensioner Pulley, 38006 (Part No.38006)
from
$35.49
Gates is a leading manufacturer of Original Equipment (OE) idler pulleys. Gates DriveAlign(R) Idler Pulleys meet or exceed OE specifications. High quality, high strength bearings run cooler and last longer than original bearings. DriveAlign Idler Pulleys are built to last by resisting dirt, salt, and other under-hood contaminants. Designed for use on automobiles and light trucks as locked center tensioning, automatic belt tensioning and idler pulleys.
See More
Dayco – Dayco Straight Heater Hose EPDM Rubber, 5/8 Inch Diameter (Sold by foot), 80271 (Part No.80271)
from
$2.99
Dayco Standard Heater Hose is designed to carry the heated coolant from the engine block to the heater core under the dashboard and return it to the engine. Note: This hose is NOT suitable for fuel or oil transfer.
See More
Carquest Premium – Carquest Hose Connector, CH8005 (Part No.CH8005)
from
$46.99
Manufactured to the highest OEM quality standards by an OE Supplier, using proprietary material to stand up to even the most demanding automotive cooling systems. Thermal shock validated and 100% leak tested
See More
Gates – Gates Automotive XL High Capacity V-Belt, 7555 (Part No.7555)
from
$30.99
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
See More
Dayco – Idler Pulley, Dayco, 89007 (Part No.89007)
from
$30.49
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.
See More
GM Genuine Parts – GM Genuine Parts Multi-Purpose Fuel Line O-Ring, 19258137 (Part No.19258137)
from
$5.09
GM Genuine Parts Multi Purpose Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
See More
Dayco – Dayco Automatic Belt Tensioner, 89213 (Part No.89213)
from
$60.99
The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage €“ or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.
See More
Gates – Gates Safety Stripe Standard Straight Heater Hose (Sold by foot), 28411 (Part No.28411)
Dayco – Dayco Serpentine Demanding Drive Kit With Belt, Pulley and Tensioner, 3 Piece Set, D60968K1 (Part No.D60968K1)
from
$108.99
Engineered specifically for the most problematic drive systems as an improvement over the OE design, Dayco demanding drive kits come in 14 applications that contain all necessary front-end accessory components to ensure a safe, reliable and noise-free belt drive system. Each kit includes up to two serpentine belts, a premium tensioner with flat spring technology and an idler pulley.
See More
Dorman – Help – Dorman – Help Positive Crankcase Ventilation Elbow, 46024 (Part No.46024)
from
$11.99
Proper crankcase ventilation is key to smooth performance and engine longevity. Made from quality materials to resist cracking and brittleness, this PCV hose replaces a worn or leaking original equipment hose.
See More
GM Genuine Parts – GM Genuine Parts Positive Crank Ventilation (PCV) Valve Hose, 93441238 (Part No.93441238)
from
$31.49
GM Genuine Parts PCV Valve Hoses are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
See More
Yukon Gear – Yukon Gear Seal Puller Tool for Popular Gm, Ford, Toyota, and Dana Differentials, 56063 (Part No.56063)
from
$57.99
Yukon Gear & Axle offers a full line of top quality differential tools to save time and money.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 4.50"" Long, .63"" Diameter, A70785" (Part No.A70785)
from
$11.49
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5"" Long, 1"" Diameter, B72060" (Part No.B72060)
from
$7.49
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Spectra Premium – Spectra Premium Fuel Filler Hose, FNH012 (Part No.FNH012)
from
$33.49
Spectra Premium fuel filler hoses are engineered, developed and validated by our in-house team of engineers ensuring it meet or exceed the OE specifications.
See More
Dorman – Dorman Fuel Filler Neck Hose, 573-029 (Part No.573-029)
from
$49.99
Fuel filler neck leaking- This replacement fuel filler neck hose is engineered and thoroughly tested to match the original filler neck for specific vehicle years, makes and models for a reliable repair.
See More
Litens – Litens Serpentine Belt Drive Component Kit, LV999010B (Part No.LV999010B)
from
$107.99
This Litens Serpentine Belt Drive Component Kit fits 1996-2003 Chev C1500, C2500, Suburban, Express, Savanna / GMC C1500, C2500, C3500, Yukon w/4.3/5.0/5.7L. These kits make it easy to maintain your entire front end accessory drive system. Eliminate the need to search for individual parts by purchasing this all-in-one solution. Front end accessory drives require maintenance at specific intervals, and parts should be replaced as part of your regularly scheduled tune-up to ensure your vehicle is at its best. Each kit contains a Litens belt tensioner, Bando serpentine belt, and any necessary idler pulley(s). All required hardware is included for the installation . Application specific instructions are also conveniently included. All parts meet or exceed OE fit, function, and performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More
Dayco – Dayco Serpentine Demanding Drive Kit With Belt, Pulley and Tensioner, 3 Piece Set, D60955K1 (Part No.D60955K1)
from
$102.99
Engineered specifically for the most problematic drive systems as an improvement over the OE design, Dayco demanding drive kits come in 14 applications that contain all necessary front-end accessory components to ensure a safe, reliable and noise-free belt drive system. Each kit includes up to two serpentine belts, a premium tensioner with flat spring technology and an idler pulley.
See More
Dorman – Dorman Engine Oil Cooler Line, 625-157 (Part No.625-157)
from
$68.99
This engine oil cooler hose assembly matches the fit and function of the original equipment components for reliable repair and restoration of proper oil circulation between the oil cooler and engine.
See More
Dorman – Dorman Engine Oil Cooler Line, 625-150 (Part No.625-150)
from
$54.99
This engine oil cooler hose assembly matches the fit and function of the original equipment components for reliable repair and restoration of proper oil circulation between the oil cooler and engine.
See More
Dayco – Dayco Poly Rib Belt Serpentine Belt 101 Long, 6 Rib Count, 5061010 (Part No.5061010)
from
$53.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Driveworks – Driveworks Poly Rib Belt Serpentine Belt 102 Long, 6 Rib Count, 1020K6 (Part No.1020K6)
from
$44.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Litens – Litens Idler Pulley: Direct Fit, Thermoplastic, 109mm Diameter, 900006A (Part No.900006A)
from
$31.99
This pulley is manufactured by Litens Automotive the original equipment part supplier and inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made in Canada using the O.E. specified design and meets all performance and durability requirements. Heavy duty polymer construction for long life and trouble-free performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More
Dayco – Idler Pulley, Dayco, 89027 (Part No.89027)
from
$27.49
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.
See More
Dayco – Dayco Flex Radiator Hoses EPDM Rubber, 22 Inch Long, 1.5 Inch Inner Dia., 81191 (Part No.81191)
from
$16.99
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.
See More
Dayco – Dayco Flex Radiator Hoses EPDM Rubber, 25 Inch Long, 1.5 Inch Inner Dia., 81201 (Part No.81201)
from
$27.49
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.
See More
Dayco – Dayco Flex Radiator Hoses EPDM Rubber, 19.5 In. Long, 1.75 In. to 1.5 In. Inner Dia., 81261 (Part No.81261)
from
$15.99
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.
See More
Upgrade your 1998 GMC C1500 with Top-Quality Belts and Hoses
When it comes to maintaining or upgrading your 1998 GMC C1500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Belts and Hoses are key to keeping your C1500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 74 Belts and Hoses for the 1998 GMC C1500, designed to meet your needs without breaking the bank.
From
Serpentine and V Belt
replacements to
Radiator Hoses
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 1998 GMC C1500 at great prices.
Our Belts and Hoses inventory for this model
ranges from just $3.99 to $116.99, with
an average price of $43.92.
Our 74 Belts and Hoses in stock come from 12 trusted brands, so you’re sure to find the right part for your 1998 GMC C1500 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1998 GMC C1500, we stock popular OEM and aftermarket Belts and Hoses from top names
like Litens, Dayco, Dorman, and more.
Litens Belts and Hoses
start at just $29.99 and boast an impressive 4.7 stars average rating from customers.
Dayco and Dorman also bring quality to the table, with Belts and Hoses available starting at $13.99, and at an average 4.5 stars rating.
With 4,642 customer reviews and counting, our 1998 GMC C1500 Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1998 GMC C1500 is always ready to roll. We’re committed to providing you with everything you need to keep your C1500 in top shape, all in one place.
Start shopping confidently below for your 1998 GMC C1500!
Best-Selling Serpentine and V Belts for 1998 GMC C1500s
Enhance the driving experience in your GMC with 29 quality Serpentine and V Belt components, starting at $31.99.
Driveworks – Driveworks Poly Rib Belt Serpentine Belt 88 Long, 6 Rib Count, 880K6 (Part No.880K6)
from
$51.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Dayco – Dayco Serpentine Demanding Drive Kit With Belt, Pulley and Tensioner, 3 Piece Set, D60960K1 (Part No.D60960K1)
from
$95.99
Engineered specifically for the most problematic drive systems as an improvement over the OE design, Dayco demanding drive kits come in 14 applications that contain all necessary front-end accessory components to ensure a safe, reliable and noise-free belt drive system. Each kit includes up to two serpentine belts, a premium tensioner with flat spring technology and an idler pulley.
See More
Dayco – Dayco Serpentine Demanding Drive Kit With Belt, Pulley and Tensioner, 3 Piece Set, D60950K1 (Part No.D60950K1)
from
$102.99
Engineered specifically for the most problematic drive systems as an improvement over the OE design, Dayco demanding drive kits come in 14 applications that contain all necessary front-end accessory components to ensure a safe, reliable and noise-free belt drive system. Each kit includes up to two serpentine belts, a premium tensioner with flat spring technology and an idler pulley.
See More
Dayco – Dayco Serpentine Demanding Drive Kit With Belt, Pulley and Tensioner, 3 Piece Set, D60968K2 (Part No.D60968K2)
from
$96.99
Engineered specifically for the most problematic drive systems as an improvement over the OE design, Dayco demanding drive kits come in 14 applications that contain all necessary front-end accessory components to ensure a safe, reliable and noise-free belt drive system. Each kit includes up to two serpentine belts, a premium tensioner with flat spring technology and an idler pulley.
See More
Dayco – Idler Pulley, Dayco, 89006 (Part No.89006)
from
$31.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.
See More
Dayco – Dayco Poly Rib Belt Serpentine Belt 95.08 Long, 6 Rib Count, 5060950 (Part No.5060950)
from
$58.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Dayco – Dayco Poly Rib Belt Serpentine Belt 96.06 Long, 6 Rib Count, 5060960 (Part No.5060960)
from
$66.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Driveworks – Driveworks Poly Rib Belt Serpentine Belt 95.08 Long, 6 Rib Count, 950K6 (Part No.950K6)
from
$39.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Driveworks – Driveworks Poly Rib Belt Serpentine Belt 96.06 Long, 6 Rib Count, 960K6 (Part No.960K6)
from
$37.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Driveworks – Driveworks Poly Rib Belt Serpentine Belt 96.85 Long, 6 Rib Count, 968K6 (Part No.968K6)
from
$38.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Dayco – Dayco Poly Rib Belt Serpentine Belt 96.85 Long, 6 Rib Count, 5060968 (Part No.5060968)
from
$64.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Dayco – Dayco Poly Rib Belt Serpentine Belt 87.01 Long, 6 Rib Count, 5060870 (Part No.5060870)
from
$51.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Dayco – Dayco Poly Rib Belt Serpentine Belt 88 Long, 6 Rib Count, 5060880 (Part No.5060880)
from
$48.49
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Driveworks – Driveworks Poly Rib Belt Serpentine Belt 87.01 Long, 6 Rib Count, 870K6 (Part No.870K6)
from
$41.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Gates – Gates FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt, K060875HD (Part No.K060875HD)
from
$96.99
Gates Fleet Runner Micro-V Belts are designed for the toughest applications. Fleet Runner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. Fleet Runner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
See More
Gates – Gates FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt, K060960HD (Part No.K060960HD)
from
$83.99
Gates Fleet Runner Micro-V Belts are designed for the toughest applications. Fleet Runner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. Fleet Runner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
See More
Yukon Gear – Yukon Gear Seal Puller Tool for Popular Gm, Ford, Toyota, and Dana Differentials, 56063 (Part No.56063)
from
$57.99
Yukon Gear & Axle offers a full line of top quality differential tools to save time and money.
See More
Gates – Gates FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt, K060870HD (Part No.K060870HD)
from
$88.99
Gates Fleet Runner Micro-V Belts are designed for the toughest applications. Fleet Runner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. Fleet Runner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
See More
Gates – Gates Micro-V Serpentine Drive Belt, K060875 (Part No.K060875)
from
$63.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
See More
Litens – Litens Serpentine Belt Drive Component Kit, LV999010D (Part No.LV999010D)
from
$116.99
This Litens Serpentine Belt Drive Component Kit fits 1996-2000 Cadillac Escalade / Chev C1500, C2500, C3500, Suburban / GMC C1500, C2500, C3500, Suburban w/5.0/5.7L. These kits make it easy to maintain your entire front end accessory drive system. Eliminate the need to search for individual parts by purchasing this all-in-one solution. Front end accessory drives require maintenance at specific intervals, and parts should be replaced as part of your regularly scheduled tune-up to ensure your vehicle is at its best. Each kit contains a Litens belt tensioner, Bando serpentine belt, and any necessary idler pulley(s). All required hardware is included for the installation . Application specific instructions are also conveniently included. All parts meet or exceed OE fit, function, and performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More
Gates – Gates Micro-V Serpentine Drive Belt, K060966 (Part No.K060966)
from
$70.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
See More
Gates – Gates Micro-V Serpentine Drive Belt, K060960 (Part No.K060960)
from
$63.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
See More
Gates – Gates Micro-V Serpentine Drive Belt, K060870 (Part No.K060870)
from
$49.49
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
See More
Litens – Litens Serpentine Belt Drive Component Kit, LV999010B (Part No.LV999010B)
from
$107.99
This Litens Serpentine Belt Drive Component Kit fits 1996-2003 Chev C1500, C2500, Suburban, Express, Savanna / GMC C1500, C2500, C3500, Yukon w/4.3/5.0/5.7L. These kits make it easy to maintain your entire front end accessory drive system. Eliminate the need to search for individual parts by purchasing this all-in-one solution. Front end accessory drives require maintenance at specific intervals, and parts should be replaced as part of your regularly scheduled tune-up to ensure your vehicle is at its best. Each kit contains a Litens belt tensioner, Bando serpentine belt, and any necessary idler pulley(s). All required hardware is included for the installation . Application specific instructions are also conveniently included. All parts meet or exceed OE fit, function, and performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More
Most Popular 1998 GMC C1500 Radiator Hoses
Customize your GMC with 5 Radiator Hoses products
like Coolant Hoses and
By-Pass Hoses, all
priced under $52.99.
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 27"" Long, 1.25"" Diameter, E71881" (Part No.E71881)
from
$52.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 21.50"" Long, 1.25"" Diameter, E71880" (Part No.E71880)
from
$51.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15.25"" Long, 1.50"" Diameter, D71428" (Part No.D71428)
from
$39.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Gates – Gates Premium Molded Coolant Hose, 21941 (Part No.21941)
from
$32.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
See More
Gates – Gates ThermalPro Premium Molded Heater Hose, 19025 (Part No.19025)
from
$17.49
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
See More
Top Picks for 1998 GMC C1500 Belt Tensioners
Upgrade GMC C1500s with top-quality Belt Tensioners parts, including 4 OEM and aftermarket selections for your 1998 model.
Litens – Litens Accessory Drive Belt Tensioner – Original Equipment Quality, 999010A (Part No.999010A)
from
$53.99
“This Litens tensioner is manufactured by the Original Equipment (O.E.) supplier of this popular General Motors tensioner. This “”O.E. Exact”””
See More
Dayco – Dayco Automatic Belt Tensioner, 89231 (Part No.89231)
from
$53.99
The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage – or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.
See More
Gates – Gates DriveAlign Automatic Belt Drive Tensioner, 38103 (Part No.38103)
from
$57.99
Gates is a global leader in Original Equipment (OE) System Design. With a full line of tensioners globally, you can count on Gates to supply premium quality DriveAlign Automatic Belt Tensioners you can depend on.
See More
Autotecnica – Autotecnica Belt Tensioner, Incl. NTN/NSK bearing, GM1413170 (Part No.GM1413170)
from
$31.49
Autotecnica offers high-quality aftermarket parts for a wide variety of Asian and North American passenger cars and trucks, include braking, cooling, driveline, electrical, engine, fuel, HVAC, steering, and suspension categories. Autotecnica is the smart choice. Whether you’re a DIY enthusiast or professional technician in need of replacement parts that meet OEM specifications, Autotecnica is an excellent alternative to expensive €œGenuine€ components.
See More
In-Demand Fuel Hoses for 1998 GMC C1500s
Select from 2 premium Fuel Hoses parts for your 1998 GMC C1500, with prices ranging from $5.09 to $33.49.
Spectra Premium – Spectra Premium Fuel Filler Hose, FNH012 (Part No.FNH012)
from
$33.49
Spectra Premium fuel filler hoses are engineered, developed and validated by our in-house team of engineers ensuring it meet or exceed the OE specifications.
See More
GM Genuine Parts – GM Genuine Parts Multi-Purpose Fuel Line O-Ring, 19258137 (Part No.19258137)
from
$5.09
GM Genuine Parts Multi Purpose Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
See More
Most Sold 1998 GMC C1500 Heater Hoses
Explore our best-selling GMC parts for the 1998 C1500 among 10 OEM and aftermarket options starting from $13.99.
Dorman – Dorman Heater Hose Connector, 800-401 (Part No.800-401)
from
$14.99
Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance._
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5"" Long, .63"" Diameter, A71877" (Part No.A71877)
from
$29.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Dorman – Dorman Coolant Connector – Inlet/Outlet 3/4In. Tube x 5/8In. Hose, 800-409 (Part No.800-409)
from
$13.99
Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 5/8 Inch Diameter, 6 Inch Length, 80400 (Part No.80400)
from
$31.99
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Dorman – Dorman Molded Heater Hose: Rubber, 626-105 (Part No.626-105)
from
$52.99
This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
See More
Dorman – Dorman Coolant Connector – Inlet/Outlet 3/4In. Tube x 5/8In. Hose (OE Fix), 800-409HP (Part No.800-409HP)
from
$27.49
HVAC heater hose connectors fail when the plastic material fatigues from heat and vibration. This upgraded Dorman OE FIX replacement connector is made from corrosion-resistant stainless steel for greater durability.
See More
Gates – Gates Molded 90 Degree Heater Hose, 28479 (Part No.28479)
from
$22.99
Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
See More
Carquest Premium – Carquest Hose Connector, CH8005 (Part No.CH8005)
from
$46.99
Manufactured to the highest OEM quality standards by an OE Supplier, using proprietary material to stand up to even the most demanding automotive cooling systems. Thermal shock validated and 100% leak tested
See More
Gates – Gates Molded 90 Degree Heater Hose, 28466 (Part No.28466)
from
$21.29
Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
See More
Carquest Premium – Carquest Hose Connector, CH8004 (Part No.CH8004)
from
$14.99
Manufactured to the highest OEM quality standards by an OE Supplier, using proprietary material to stand up to even the most demanding automotive cooling systems. Thermal shock validated and 100% leak tested
See More
Top-Rated Belts and Hoses Brands For Your 1998 GMC C1500
Shop for the best-rated brands offering Belts and Hoses and other products for your 1998 GMC C1500s. Below you’ll find some of our best rated Belts and Hoses from Litens, Dayco, and Dorman, and more. Belts and Hoses from these brands that fit a 1998 C1500 start at just $13.99 and are rated as high as 4.7 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.
Popular Litens 1998 GMC C1500 Belts and Hoses
When it comes to maintaining or upgrading your 1998 GMC C1500, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Litens ticks all of those boxes. We offer a wide selection of Litens Belts and Hoses, specifically designed for the 1998 GMC C1500. With over 3 Litens brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $29.99, with an average price of just $38.66. Plus, with over 49 customer reviews and an average rating of 4.7 stars, you can trust that our Litens Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$29.99
(5)
Litens Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 70mm Diameter, 900031A
“Works perfectly! The old one was squeaking and it was time to be replaced.”
from
$31.99
(39)
Litens Idler/Tensioner Pulley: Direct Fit, Steel, 90mm Diameter, 900052A
“good part.”
from
$53.99
(5)
Litens Accessory Drive Belt Tensioner – Original Equipment Quality, 999010A
“The right part for my vehicle.”
Popular Dayco 1998 GMC C1500 Belts and Hoses
Dayco auto parts is one of the highest quality Belts and Hose brands in the market. Any 1998 GMC C1500 owner should feel confident when installing genuine Dayco parts in their vehicle. To ensure the best fit and performance for your 1998 C1500, Advance Auto Parts carries a full inventory of 3 Dayco Belts and Hoses. Plus you will be keeping your GMC in peak condition while saving money because prices on these Dayco Belts and Hoses range from $29.99 to $95.99, plus, with more than 60 customer reviews and an impressive 4.5 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.
from
$52.99
(15)
"Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 27"" Long, 1.25"" Diameter, E71881"
“Fit right”
from
$29.99
(44)
"Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5"" Long, .63"" Diameter, A71877"
“Perfect fit.”
from
$95.99
(1)
Dayco Serpentine Demanding Drive Kit With Belt, Pulley and Tensioner, 3 Piece Set, D60960K1
“had a squeeky belt pulley and decided to change out belt tensioner and pulley, this kit did the trick,
Did not use the tensioner bolt that cam with th”
FAQs for 1998 GMC C1500 Belts and Hoses
Which Belts and Hoses are best-sellers for 1998 GMC C1500s?
Out of 74 Belts and Hoses that fit 1998 GMC C1500s, the following parts are the top sellers:
- Litens Idler/Tensioner Pulley: Direct Fit, Steel, 90mm Diameter, 900052A (10457738) – $31.99
- Dorman Coolant Connector – Inlet/Outlet 3/4In. Tube x 5/8In. Hose, 800-409 (22149402) – $13.99
- Idler Pulley, Dayco, 89015 (5160000) – $32.99
What’s the price range for 1998 GMC C1500 Belts and Hoses?
Belts and Hose prices for the 1998 GMC C1500 start at $3.99 and go up to $116.99 for the most premium parts.
What’s the average price of a Belts and Hose for a 1998 GMC C1500?
The average price for Belts and Hoses for the 1998 GMC C1500 is $43.92. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Belts and Hoses for other GMC C1500 model years?
What are the cheapest Belts and Hoses for my 1998 GMC C1500?
The cheapest 1998 GMC C1500 Belts and Hoses we carry in stock are:
- Gates Safety Stripe Standard Straight Heater Hose (Sold by foot), 28411 (10505038) – $3.99
- Gates Safety Stripe Standard Straight Heater Hose (Sold by foot), 28412 (10505007) – $4.99
- GM Genuine Parts Multi-Purpose Fuel Line O-Ring, 19258137 (11930867) – $5.09
- Dorman – Help Positive Crankcase Ventilation Elbow, 46024 (10097661) – $11.99
- Dorman Coolant Connector – Inlet/Outlet 3/4In. Tube x 5/8In. Hose, 800-409 (22149402) – $13.99
What are the top-rated Belts and Hoses that fit the 1998 GMC C1500?
Out of 4,642 reviews by customers, our 1998 GMC C1500 Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 1998 GMC C1500 and their top-rated products:
- Serpentine and V Belts
- Dayco Serpentine Demanding Drive Kit With Belt, Pulley and Tensioner, 3 Piece Set, D60960K1 (11333806) – $95.99
- Dayco Serpentine Demanding Drive Kit With Belt, Pulley and Tensioner, 3 Piece Set, D60950K1 (11333803) – $102.99
- Dayco Serpentine Demanding Drive Kit With Belt, Pulley and Tensioner, 3 Piece Set, D60968K2 (11333824) – $96.99
- Belt Tensioners
- Dayco Serpentine Demanding Drive Kit With Belt, Pulley and Tensioner, 3 Piece Set, D60960K1 (11333806) – $95.99
- Dayco Serpentine Demanding Drive Kit With Belt, Pulley and Tensioner, 3 Piece Set, D60950K1 (11333803) – $102.99
- Dayco Serpentine Demanding Drive Kit With Belt, Pulley and Tensioner, 3 Piece Set, D60968K2 (11333824) – $96.99
- Radiator Hoses
- Dayco Serpentine Demanding Drive Kit With Belt, Pulley and Tensioner, 3 Piece Set, D60960K1 (11333806) – $95.99
- Dayco Serpentine Demanding Drive Kit With Belt, Pulley and Tensioner, 3 Piece Set, D60950K1 (11333803) – $102.99
- Dayco Serpentine Demanding Drive Kit With Belt, Pulley and Tensioner, 3 Piece Set, D60968K2 (11333824) – $96.99
What types of Belts and Hoses do you sell for my 1998 GMC C1500?
As of 8/2/26, these are some of the most in-demand types of Belts and Hoses for a 1998 GMC C1500:
Can I get help with 1998 GMC C1500 Belts and Hose orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Belts and Hoses and more.
What is your return policy for GMC C1500 Belts and Hoses?
Advance Auto Parts keeps returns simple. For new GMC C1500 Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
