1998 Chevrolet K3500 Differentials

Essential 1998 Chevrolet K3500 Differentials

Yukon Gear – Pinion Install Kit For ’88 And Older 10.5" GM 14 Bolt Truck Differential (Part No.13058)

Pinion Install Kit For '88 And Older 10.5" GM 14 Bolt Truck Differential

from

$362.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits 1988 and down GM 10.5″ 14 bolt truck
  • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Dura Grip Positraction For 10.5" GM 14 Bolt Truck, 4.10 & Down (Part No.26030)

Dura Grip Positraction For 10.5" GM 14 Bolt Truck, 4.10 & Down

from

$1099.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

Product Features:
  • Fits GM 10.5″ 14 bolt truck
  • 4.10 ratio and down only
  • Clutch style positraction
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

Motive Gear – Differential Master Bearing Kit – Timken (Part No.R80RMKT)

Differential Master Bearing Kit - Timken

from

$281.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • MSTR KIT DANA 80
See More

Yukon Gear – Dana 60 & Dana 70 Power Lok Clutch Set (Steel & Fiber) (Part No.16155)

Dana 60 & Dana 70 Power Lok Clutch Set (Steel & Fiber)

from

$181.99
Dana 60 & Dana 70 Power Lok clutch set (steel & fiber).

Product Features:
  • Clutch kit
  • Fit Dana Spicer 60, 70, 70U and 70HD Powr Lok positraction
See More

Yukon Gear – Minor Install Kit For ’89-’98 10.5" GM 14 Bolt Truck Differential (Part No.12046)

Minor Install Kit For '89-'98 10.5" GM 14 Bolt Truck Differential

from

$108.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:
  • Fits 1989 and up GM 10.5″ 14 bolt truck
  • Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
See More

Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)

Dana 60, Dana 70 & Dana 80 Cover Bolt

from

$5.99
3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

Product Features:
  • Cover bolt for Dana Spicer 60, 70 and 80
  • 3/8″
See More

Pro-King – Differential Internal Nest Kit (Part No.743B717)

Differential Internal Nest Kit

from

$221.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Dorman – Rear Axle Shaft, Left or Right (Part No.630-136)

Rear Axle Shaft, Left or Right

from

$339.99
Axle shaft damaged or bearings worn out? This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.

Product Features:
  • Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models
  • Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications
  • Durable construction – designed to rigorous standards and tested to ensure performance
  • Trustworthy solution – backed by team of engineers and quality control specialists in the United States
See More

Yukon Gear – Replacement Outer Oil Slinger For Dana 60, 70, 70U & 70HD (Part No.33019)

Replacement Outer Oil Slinger For Dana 60, 70, 70U & 70HD

from

$5.99
Product Features:
  • Outer oil slinger for Dana Spicer 60, 70, 70U and 70HD
See More

ACDelco – Pinion Seal (Part No.J7010211704ACD)

Pinion Seal

from

$40.45
Pinion Seal

Yukon Gear – Adjuster Lock Bolt For Left Hand Case Half Of 7.2" And 9.25" GM IFS (Part No.33244)

Adjuster Lock Bolt For Left Hand Case Half Of 7.2" And 9.25" GM IFS

from

$31.99
Adjuster lock bolt for left hand case half of 7.2″ and 9.25″ GM IFS.

Product Features:
  • Side adjuster lock bolt
  • Fits GM 7.2″ IFS and 9.25″ IFS
See More

Yukon Gear – Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70 (Part No.23007)

Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70

from

$13.99
Product Features:
  • Cover gasket
  • Fits Dana Spicer 60, 70, 70U and 70HD
See More

Motive Gear – Differential Gear Install Kit (Part No.GM10.5IKLA)

Differential Gear Install Kit

from

$52.79
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More

Yukon Gear – Pinion Depth Shims For 10.5" GM 14 Bolt Truck (Part No.55058)

Pinion Depth Shims For 10.5" GM 14 Bolt Truck

from

$37.99
14T GM pinion shim kit.

Product Features:
  • Pinion depth shims for GM 10.5″ 14 bolt truck
See More

Powertrax – Lock Right Locker (Part No.1950-LR)

Lock Right Locker

from

$487.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!

Product Features:
  • Powertrax® proves that you don’t have to choose between the superior traction of a locking differential and smooth handling and drivability of an open differential. Powertrax Lock-Right Lockers, No-Slip Traction Systems and GRIP limited slip differentials and lockers give you the best of both worlds!
  • The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
See More

Yukon Gear – Left Hand Adjuster Lock Nut For 9.25" GM (Part No.33354)

Left Hand Adjuster Lock Nut For 9.25" GM

from

$21.99
Left hand adjuster lock nut for 9.25″ GM.

Product Features:
  • Side adjuster lock nut
  • Fits GM 9.25″
See More

Yukon Gear – 14T Pinion Gear Thrust Washer (Part No.33384)

14T Pinion Gear Thrust Washer

from

$8.99
14T pinion gear Thrust washer.

Product Features:
  • Pinion gear thrust washer
  • Fits GM 10.5″ 14 bolt truck
See More

Motive Gear – Differential Crush Sleeve (Part No.14012691)

Differential Crush Sleeve

from

$2.99


Product Features:
  • CRUSH SLEEVE 9.5 GM 14BLT MIN ORDER 1000
See More

Motive Gear – Differential Pinion Nut (Part No.1260823)

Differential Pinion Nut

from

$8.49
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both o
See More

Motive Gear – Differential Carrier Bearing Kit – Timken (Part No.R10.5CKT)

Differential Carrier Bearing Kit - Timken

from

$93.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • CARRIER BEARING KIT FRD 10.5″ W/TIM
See More

Yukon Gear – Standard Open Spider Gear Kit For GM 10.5" And 14T With 30 Spline Axles (Part No.16044)

Standard Open Spider Gear Kit For GM 10.5" And 14T With 30 Spline Axles

from

$315.99
Yukon standard open spider gear kit for GM 10.5″ and 14T with 30 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fits GM 10.5″ 14 bolt truck open differential
  • Includes two side gears, four pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

MTC – Differential Drain P (Part No.J70581460602MTC)

Differential Drain P

from

$8.02
Differential Drain P

Yukon Gear – Replacement Yoke For Dana 60 And 70 With A 1410 U/Joint Size (Part No.41030)

Replacement Yoke For Dana 60 And 70 With A 1410 U/Joint Size

from

$266.99
Yukon replacement yoke for Dana 60 and 70 with a 1410 U/joint size. 4.188″ snap ring span, 1.188″ cap diameter. Outside snap ring.This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Dana Spicer 60, 70, 70U and 70HD
  • 29 spline
  • 1410 u-joint size
  • 4.188″ snap ring span
  • 1.188″ cap diameter
  • Outside snap ring design
  • Strap style
See More

Yukon Gear – Steel Spool For GM 14 Bolt Truck With 30 Spline Axles, 4.10 & Down (Part No.32048)

Steel Spool For GM 14 Bolt Truck With 30 Spline Axles, 4.10 & Down

from

$526.99
Yukon Performance steel spool for GM 14T with 30 spline axles. fits 4.10 and down. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.

Product Features:
  • Fits GM 10.5″ 14 bolt truck with 30 spline axles
  • 4.10 and down ratio only or 4.56 and up thick gears
  • Provides 100% traction to both wheels at all times
  • Not recommended for street driven vehicles
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

Redline Synthetic "Shock Proof" Oil - 3 Quarts

from

$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:
  • Includes three quarts of Redline Shockproof oil
See More

National – Bearings (Part No.R-1581-TV)

Bearings

from

$44.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • High radial load capacity makes them suitable for high speed applications
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Driveworks – Taper Bearing Set (Part No.S-A-38)

Taper Bearing Set

from

$13.79
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Yukon Gear – O-Ring For Left Hand Carrier Bearing Adjuster For 9.25" GM IFS (Part No.33133)

O-Ring For Left Hand Carrier Bearing Adjuster For 9.25" GM IFS

from

$15.99
O-ring for left hand carrier bearing adjuster for 9.25″ GM IFS.

Product Features:
  • Axle o-ring
  • Fits Chrysler 9.25″ IFS
See More

1998 Chevrolet K3500 Differentials

Maybe you’re in the middle of a full rebuild of that 1998 Chevrolet K3500. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 283 different Differentials in our inventory ranging from $1.89 to $2,969.99. That means you can find the exact parts or products you need to keep that 1998 Chevrolet K3500 running smoothly.

Differentials are only as good as their brand. We stock 15 different brands to make sure you have plenty of trusted parts to choose from for your 1998 Chevrolet K3500. National, Idemitsu, and Felpro are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1998 Chevrolet K3500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 987 reviews in this category, some of the top rated parts include Multi Purpose Seal with 4.5 stars and Bearings with 4.8 stars.

So if you’re in the market for aftermarket Differentials to keep your 1998 Chevrolet K3500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1998 Chevrolet K3500 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1998 Chevrolet K3500 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your K3500 the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Idemitsu Differentials

We carry Idemitsu parts in our stock across Differential Oil categories, plus more. For a 1998 Chevrolet K3500, our most popular Idemitsu Differentials include:
Type HP Automatic Transmission Fluid - 1 qt
from $13.79
(3)
Type HP Automatic Transmission Fluid – 1 qt
Differential Oil

Top 1998 Chevrolet K3500 Differentials from Dorman

Dorman products are another trusted brand when it comes to Differentials for your 1998 Chevrolet K3500. Popular Dorman parts include:
Ring and Pinion Bearing Installation Kit
from $282.99
(253)
Ring and Pinion Bearing Installation Kit
Differential Bearing Kits
Rear Differential Cover
from $38.49
(15)
Rear Differential Cover
Differential Covers

FAQs for 1998 Chevrolet K3500 Differentials

What are the most purchased Differentials for the 1998 Chevrolet K3500?

Out of 283 Differentials for the 1998 Chevrolet K3500, the most popular in our inventory are:
Bearings
from $22.99
(12)
Bearings
Differential Bearings
Differential Cover Gasket
from $6.79
(13)
Differential Cover Gasket
Rear Differential Cover Gaskets
3 Qt - Penzoil 80W90 Conventional Gear Oil
from $44.99
This product is not rated
3 Qt – Penzoil 80W90 Conventional Gear Oil
Differential Oil

What are the top-rated 1998 Chevrolet K3500 Differentials?

Top-rated Differentials for your 1998 Chevrolet K3500 based on customer reviews/ratings are:
Multi Purpose Seal
from $34.99
(8)
Multi Purpose Seal
“Nicely made. Heavy duty-just like factory parts.”
Bearings
from $16.99
(6)
Bearings
“Fit perfectly. No difficulty replacing my old ones.”
Bearings
from $6.99
(6)
Bearings
“perfect fit”