1998 Chevrolet Express 3500 Suspension Parts

Please Select your Vehicle to See Exact Fit Parts

Essential Suspension Parts for 1998 Chevrolet Express 3500s

Monroe – OESpectrum Front Suspension Shock Absorber (Part No.911257)

OESpectrum Front Suspension Shock Absorber

from

$103.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe OESpectrum light truck shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference Guarantee
  • CONTROL AND DURABILITY – Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
  • IMPROVES PERFORMANCE – Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration
  • BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
  • BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
  • 5/8 inch Piston Rod: Heavy-duty nitrocarburized rod for long service life. On non-dust shield units only
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

Carquest Premium – Repair Harness (Part No.PTA1176)

Repair Harness

from

$53.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Nolathane – Leaf Spring – Rear Eye Bushing (Part No.REV164.0052)

Leaf Spring - Rear Eye Bushing

from

$25.99
A critical service item for any leaf sprung vehicle. High kilometers and heavy load carrying causes excessive wear on rubber bushings. Nolathane’s signature black bushings are made tough and offer outstanding abrasion resistance, high load bearing capability (4WD¿s, utes and towing), flexibility, increased tensile strength and chemical resistance to oil, grease, ozone and weathering.

Product Features:
  • Kit Contains: 4 bushings, 2 Tubes
See More

MOOG – Coil Spring Set (Part No.81004)

Coil Spring Set

from

$426.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • 100% Load tested
  • Easy to install
  • Provides like-new steering
  • Designed to lower stresses for longer service life
  • Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
See More

Dorman – Leaf Spring Insert (Part No.924-070)

Leaf Spring Insert

from

$14.99
This leaf spring bumper spacer is designed to match the fit, appearance and function of the original spacer on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this leaf spring bumper spacer is designed to match the fit, appearance and function of the original spacer on specified vehicles
  • Restores functionality – this spacer is made to fully restore part functionality after the original part fails
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Suspension Leaf Spring (Part No.22-1209)

Suspension Leaf Spring

from

$712.99
Properly functioning leaf springs hold the weight and payload of a vehicle or trailer and are essential to suspension performance and passenger comfort. Check the product attributes to select the right leaf spring for your application.

Product Features:
  • Direct replacement – these leaf springs are designed to match the fit and function of the original leaf springs on specific vehicles or trailers
  • Ideal solution – seamlessly replaces leaf springs damaged by overloading, collision, cracking or corrosion, or are due for replacement
  • Durable construction – made from quality materials to strict specifications to ensure reliable performance and long service life
  • Trustworthy quality – engineered, manufactured and supported by the premier aftermarket leaf spring provider in the USA
See More

KYB – High Pressure Monotube Gas Shock (Part No.554348)

High Pressure Monotube Gas Shock

from

$106.99
The KYB Gas-a-just monotube shock absorber has additional performance advantages over the traditional twin-tube design: It can instantly, automatically adjust to your performance needs and never experiences fade due to aeration. The KYB Gas-a-just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and control, and a second high-pressure nitrogen gas area with a floating piston that provides a comfortable ride during normal driving and adds instant performance on demand.

Product Features:
  • Adds Up To 25% More Damping Performance Over Original Equipment Shocks
  • Components And Valving Designed Specifically For Gm Vans
  • Gas-A-Just Monotubes Include Additional Damping Over One Design For Vehicles That Work, Tow, And Have Larger, Heavier Tires & Wheels
  • High Pressure Monotube Design Separates The Gas And Oil For Fade Free Operation And Instant Response
  • Fluid Leaking Can Be A Cause Of Shock Failure, The KYB Gas-A-Just Has An Ultra-Smooth Triple Chrome Plated Chrome Piston Rod To Reduce Seal Wear
  • The Higher Gas Pressure Of The KYB Gas-A-Just Responds Quickly To Improve Steering Response
  • Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Gas-A-Just Helps Keep Electronic Safety Systems Performing As Designed.
See More

Rare Parts – Control Arm Bushing (Part No.RP18946)

Control Arm Bushing

from

$139.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • Torsional rubber bushings
  • UV resistant
  • No Squeak
See More

Firestone Ride-Rite – Controls Two Air Springs Individually, Switch Operated (Part No.2168)

Controls Two Air Springs Individually, Switch Operated

from

$1043.00
Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:
  • Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
  • Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
  • Provides An Instant Air Source For The Air Helper Springs Or Accessories
  • Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
See More

Firestone Ride-Rite – Includes Heavy Duty Compressor/3 Gallon Air Tank/25 Foot Extension Hose (Part No.2239)

Includes Heavy Duty Compressor/3 Gallon Air Tank/25 Foot Extension Hose

from

$703.99
Our Air Command systems give customers the ability to conveniently adjust their air springs with the touch of a button thanks to our Air Command Air Compressor Kits. Our designs provide an instant air source to a vehicle air suspension system, giving users the freedom to adjust their air springs to accommodate different loads and road conditions from both inside and outside of the vehicle.

Product Features:
  • The Easy To Read Digital Display Is Designed So You Can See It During The Day, But It Does Not Blind You At Night
  • The Wireless Remote Utilizes A New Sleep Cycle And LED Display That Reduces Energy Use And Improves Battery Life
  • Easy Installation
See More

Dorman – Control Arm Bushing Tool (Part No.546-900)

Control Arm Bushing Tool

from

$165.99
This suspension control arm bushing tool is precision-engineered to help easily remove suspension bushings without damaging other components.

Product Features:
  • Handy solution – this suspension control arm bushing tool is precision-engineered to help easily remove suspension bushings
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

PRT – COMPLETESTRUTASSMBLY (Part No.920927)

COMPLETESTRUTASSMBLY

from

$99.99
COMPLETESTRUTASSMBLY

Carquest Premium – COMPLETESTRUTASSMBLY (Part No.28-920909)

COMPLETESTRUTASSMBLY

from

$97.99
COMPLETESTRUTASSMBLY

MOOG – Coil Spring Insulator (Part No.K160045)

Coil Spring Insulator

from

$19.79
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Protects spring and spring seat from damage
  • Replacement helps to reduce noise
  • Includes insulator and bearing
See More

Rare Parts – Coil Spring Insulator (Part No.RP46346)

Coil Spring Insulator

from

$39.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • Reduces road noise
  • UV resistant
  • No Squeak
See More

Dorman – Position Leaf Spring Shackle Kit (Part No.722-006)

Position Leaf Spring Shackle Kit

from

$39.99
Get ahead of fatigued or rusted leaf spring shackles before they become dangerous. Made of sturdy steel with a power coated finish to resist corrosion, this leaf spring shackle is a direct replacement for your vehicle’s stock shackle.

Product Features:
  • Direct replacement – This leaf spring shackle fits and performs like original equipment shackle
  • Quality construction – manufactured from durable steel and powder coated for corrosion resistance and a long service life
  • Excellent value – original equipment quality at a lower price
  • Ready to install – all essential hardware is included for an easy installation
See More

Dorman – Position Leaf Spring Shackle Kit (Part No.722-033)

Position Leaf Spring Shackle Kit

from

$61.99
Get ahead of fatigued or rusted leaf spring shackles before they become dangerous. Made of sturdy steel with a power coated finish to resist corrosion, this leaf spring shackle is a direct replacement for your vehicle’s stock shackle.

Product Features:
  • Direct replacement – This leaf spring shackle fits and performs like original equipment shackle
  • Quality construction – manufactured from durable steel and powder coated for corrosion resistance and a long service life
  • Excellent value – original equipment quality at a lower price
  • Ready to install – all essential hardware is included for an easy installation
See More

Monroe – Shock-Mate Suspension Shock Absorber Bellows (Part No.SA1998)

Shock-Mate Suspension Shock Absorber Bellows

from

$24.99
Monroe Shock-Mate Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:
  • Protects the shock’s piston rod from damage
  • Universal design for easy installation
  • Tie-strap included for a secure fit
  • Constructed from high quality urethane for maximum durability
  • Multiple color choices available
See More

Dorman – Position Leaf Spring Bracket Kit (Part No.722-087)

Position Leaf Spring Bracket Kit

from

$82.99
This leaf spring hanger is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this leaf spring hanger is designed to match the fit and function of the original part on specified vehicles
  • Ideal solution – this hanger is a reliable replacement for an original part that has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Monroe – Shock-Mate Suspension Shock Absorber Bellows (Part No.SA1997)

Shock-Mate Suspension Shock Absorber Bellows

from

$26.99
Monroe Shock-Mate Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:
  • Protects the shock’s piston rod from damage
  • Universal design for easy installation
  • Tie-strap included for a secure fit
  • Constructed from high quality urethane for maximum durability
  • Multiple color choices available
See More

Carquest Premium – Multi-Purpose Relay (Part No.RAA1236)

Multi-Purpose Relay

from

$26.99
Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
See More

GM Genuine Parts – Multi-Purpose Relay (Part No.15-81106)

Multi-Purpose Relay

from

$32.99
GM Genuine Parts Wiring Relays are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These relays help connect or disconnect power to a vehicle accessory when it receives a low voltage signal from a switch. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Helps connect or disconnect power to vehicle accessories
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Carquest Premium – Multi-Purpose Relay (Part No.RAA1243)

Multi-Purpose Relay

from

$23.99
Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
See More

Dorman – Help – Leaf Spring Inserts (Part No.31067)

Leaf Spring Inserts

from

$13.99
This leaf spring insulator is designed to match the fit and function of the original insulator on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this leaf spring insulator is designed to match the fit and function of the original insulator on specified vehicles
  • Restores functionality – reliable replacement for an original part that has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Upgrade your 1998 Chevrolet Express 3500 with Top-Quality Suspension Parts

When it comes to maintaining or upgrading your 1998 Chevrolet Express 3500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Suspension Parts are key to keeping your Express 3500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 45 Suspension Parts for the 1998 Chevrolet Express 3500, designed to meet your needs without breaking the bank. From Suspension Hardware replacements to Air Suspension and Kits upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Suspension Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Suspension Parts for your 1998 Chevrolet Express 3500 at great prices. Our Suspension Parts inventory for this model ranges from just $13.99 to $1,043.00, with an average price of $139.08. Our 45 Suspension Parts in stock come from 11 trusted brands, so you’re sure to find the right part for your 1998 Chevrolet Express 3500 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1998 Chevrolet Express 3500, we stock popular OEM and aftermarket Suspension Parts from top names like Moog, Monroe, Dorman, and more. Moog Suspension Parts start at just $19.79 and boast an impressive 4.5 stars average rating from customers. Monroe and Dorman also bring quality to the table, with Suspension Parts available starting at $13.99, and at an average 4.4 stars rating. With 802 customer reviews and counting, our 1998 Chevrolet Express 3500 Suspension Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Suspension Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1998 Chevrolet Express 3500 is always ready to roll. We’re committed to providing you with everything you need to keep your Express 3500 in top shape, all in one place. Start shopping confidently below for your 1998 Chevrolet Express 3500!

Best-Selling Suspension Hardware for 1998 Chevrolet Express 3500s

Enhance the driving experience in your Chevrolet with 1 quality Suspension Hardware components, starting at $165.99.

Dorman – Control Arm Bushing Tool (Part No.546-900)

Control Arm Bushing Tool

from

$165.99
This suspension control arm bushing tool is precision-engineered to help easily remove suspension bushings without damaging other components.

Product Features:
  • Handy solution – this suspension control arm bushing tool is precision-engineered to help easily remove suspension bushings
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Most Popular 1998 Chevrolet Express 3500 Air Suspension and Kits

Customize your Chevrolet with 8 Air Suspension and Kits products like Active Suspension Relays, Air Suspension Sensor Connectors, and Air Suspensions, all priced under $1,043.00.

Carquest Premium – Multi-Purpose Relay (Part No.RAA1236)

Multi-Purpose Relay

from

$26.99
Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
See More

GM Genuine Parts – Multi-Purpose Relay (Part No.15-81106)

Multi-Purpose Relay

from

$32.99
GM Genuine Parts Wiring Relays are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These relays help connect or disconnect power to a vehicle accessory when it receives a low voltage signal from a switch. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Helps connect or disconnect power to vehicle accessories
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Carquest Premium – Multi-Purpose Relay (Part No.RAA1243)

Multi-Purpose Relay

from

$23.99
Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
See More

Carquest Premium – Multi-Use Connector (Part No.PTA1046)

Multi-Use Connector

from

$54.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Product constructed to meet all design and operating characteristics as intended by the manufacturer.
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

GM Genuine Parts – Multi-Purpose Wire Connector (Part No.PT2784)

Multi-Purpose Wire Connector

from

$46.49
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Protective outer coverings help provide long-lasting durability
  • Color-coded wires allow for easy installation
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – Repair Harness (Part No.PTA1176)

Repair Harness

from

$53.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Firestone Ride-Rite – Controls Two Air Springs Individually, Switch Operated (Part No.2168)

Controls Two Air Springs Individually, Switch Operated

from

$1043.00
Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:
  • Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
  • Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
  • Provides An Instant Air Source For The Air Helper Springs Or Accessories
  • Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
See More

Firestone Ride-Rite – Includes Heavy Duty Compressor/3 Gallon Air Tank/25 Foot Extension Hose (Part No.2239)

Includes Heavy Duty Compressor/3 Gallon Air Tank/25 Foot Extension Hose

from

$703.99
Our Air Command systems give customers the ability to conveniently adjust their air springs with the touch of a button thanks to our Air Command Air Compressor Kits. Our designs provide an instant air source to a vehicle air suspension system, giving users the freedom to adjust their air springs to accommodate different loads and road conditions from both inside and outside of the vehicle.

Product Features:
  • The Easy To Read Digital Display Is Designed So You Can See It During The Day, But It Does Not Blind You At Night
  • The Wireless Remote Utilizes A New Sleep Cycle And LED Display That Reduces Energy Use And Improves Battery Life
  • Easy Installation
See More

Top Picks for 1998 Chevrolet Express 3500 Coil and Leaf Springs

Upgrade Chevrolet Express 3500s with top-quality Coil and Leaf Springs parts, including 17 OEM and aftermarket selections for your 1998 model.

Dorman – Help – Leaf Spring Inserts (Part No.31067)

Leaf Spring Inserts

from

$13.99
This leaf spring insulator is designed to match the fit and function of the original insulator on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this leaf spring insulator is designed to match the fit and function of the original insulator on specified vehicles
  • Restores functionality – reliable replacement for an original part that has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Monroe – Load Adjusting Rear Suspension Shock Absorber and Coil Spring Assembly (Part No.58612)

Load Adjusting Rear Suspension Shock Absorber and Coil Spring Assembly

from

$213.99
Ideal for light trucks that that tow or carry varying loads, Monroe load adjusting shocks include a heavy gauge calibrated spring that adjusts to road and weight conditions to provide extra control when operating conditions get more demanding.

Product Features:
  • REDUCES SAG UNDER LOAD – Ideal for occasionally hauling or towing varying loads, heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission, see owner’s manual)
  • EXCEPTIONAL HANDLING – Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
  • CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
  • LONGER SERVICE LIFE – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
  • IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • Nitrogen Gas Charged: For Improved Ride & Handling, Helps Maintain Tire To Road Contact By Reducing Aeration – On Most Applications
  • 5/8 nitrocarburized rod for long service life.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
  • Upper Mount Type: Cross Pin Mount – Closed Ended, 5/16″ Hole ID (Both Ends) X 2.7/8″ Pin Length (Hole Center to Center)
See More

Dorman – Position Leaf Spring Shackle Kit (Part No.722-006)

Position Leaf Spring Shackle Kit

from

$39.99
Get ahead of fatigued or rusted leaf spring shackles before they become dangerous. Made of sturdy steel with a power coated finish to resist corrosion, this leaf spring shackle is a direct replacement for your vehicle’s stock shackle.

Product Features:
  • Direct replacement – This leaf spring shackle fits and performs like original equipment shackle
  • Quality construction – manufactured from durable steel and powder coated for corrosion resistance and a long service life
  • Excellent value – original equipment quality at a lower price
  • Ready to install – all essential hardware is included for an easy installation
See More

MOOG – Coil Spring Insulator (Part No.K160045)

Coil Spring Insulator

from

$19.79
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Protects spring and spring seat from damage
  • Replacement helps to reduce noise
  • Includes insulator and bearing
See More

Dorman – Leaf Spring Insert (Part No.924-070)

Leaf Spring Insert

from

$14.99
This leaf spring bumper spacer is designed to match the fit, appearance and function of the original spacer on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this leaf spring bumper spacer is designed to match the fit, appearance and function of the original spacer on specified vehicles
  • Restores functionality – this spacer is made to fully restore part functionality after the original part fails
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Position Leaf Spring Shackle Kit (Part No.722-033)

Position Leaf Spring Shackle Kit

from

$61.99
Get ahead of fatigued or rusted leaf spring shackles before they become dangerous. Made of sturdy steel with a power coated finish to resist corrosion, this leaf spring shackle is a direct replacement for your vehicle’s stock shackle.

Product Features:
  • Direct replacement – This leaf spring shackle fits and performs like original equipment shackle
  • Quality construction – manufactured from durable steel and powder coated for corrosion resistance and a long service life
  • Excellent value – original equipment quality at a lower price
  • Ready to install – all essential hardware is included for an easy installation
See More

MOOG – Coil Spring Set (Part No.81012)

Coil Spring Set

from

$464.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • 100% Load tested
  • Easy to install
  • Provides like-new steering
  • Designed to lower stresses for longer service life
  • Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
See More

Dorman – Position Leaf Spring Bracket Kit (Part No.722-087)

Position Leaf Spring Bracket Kit

from

$82.99
This leaf spring hanger is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this leaf spring hanger is designed to match the fit and function of the original part on specified vehicles
  • Ideal solution – this hanger is a reliable replacement for an original part that has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Suspension Leaf Spring (Part No.22-1209HD)

Suspension Leaf Spring

from

$795.99
Properly functioning leaf springs hold the weight and payload of a vehicle or trailer and are essential to suspension performance and passenger comfort. Check the product attributes to select the right leaf spring for your application.

Product Features:
  • Direct replacement – these leaf springs are designed to match the fit and function of the original leaf springs on specific vehicles or trailers
  • Ideal solution – seamlessly replaces leaf springs damaged by overloading, collision, cracking or corrosion, or are due for replacement
  • Durable construction – made from quality materials to strict specifications to ensure reliable performance and long service life
  • Trustworthy quality – engineered, manufactured and supported by the premier aftermarket leaf spring provider in the USA
  • Durable design – rigorously engineered and carefully manufactured to provide like-new feel and dependable service life
See More

Dorman – Suspension Leaf Spring (Part No.22-1209)

Suspension Leaf Spring

from

$712.99
Properly functioning leaf springs hold the weight and payload of a vehicle or trailer and are essential to suspension performance and passenger comfort. Check the product attributes to select the right leaf spring for your application.

Product Features:
  • Direct replacement – these leaf springs are designed to match the fit and function of the original leaf springs on specific vehicles or trailers
  • Ideal solution – seamlessly replaces leaf springs damaged by overloading, collision, cracking or corrosion, or are due for replacement
  • Durable construction – made from quality materials to strict specifications to ensure reliable performance and long service life
  • Trustworthy quality – engineered, manufactured and supported by the premier aftermarket leaf spring provider in the USA
See More

Dorman – Suspension Leaf Spring (Part No.22-1175)

Suspension Leaf Spring

from

$589.99
Properly functioning leaf springs hold the weight and payload of a vehicle or trailer and are essential to suspension performance and passenger comfort. Check the product attributes to select the right leaf spring for your application.

Product Features:
  • Direct replacement – these leaf springs are designed to match the fit and function of the original leaf springs on specific vehicles or trailers
  • Ideal solution – seamlessly replaces leaf springs damaged by overloading, collision, cracking or corrosion, or are due for replacement
  • Durable construction – made from quality materials to strict specifications to ensure reliable performance and long service life
  • Trustworthy quality – engineered, manufactured and supported by the premier aftermarket leaf spring provider in the USA
See More

PRT – COMPLETESTRUTASSMBLY (Part No.920909)

COMPLETESTRUTASSMBLY

from

$107.99
COMPLETESTRUTASSMBLY

PRT – COMPLETESTRUTASSMBLY (Part No.920927)

COMPLETESTRUTASSMBLY

from

$99.99
COMPLETESTRUTASSMBLY

Carquest Premium – COMPLETESTRUTASSMBLY (Part No.28-920909)

COMPLETESTRUTASSMBLY

from

$97.99
COMPLETESTRUTASSMBLY

Carquest Premium – COMPLETESTRUTASSMBLY (Part No.28-920927)

COMPLETESTRUTASSMBLY

from

$89.99
COMPLETESTRUTASSMBLY

Rare Parts – Coil Spring Insulator (Part No.RP46346)

Coil Spring Insulator

from

$39.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • Reduces road noise
  • UV resistant
  • No Squeak
See More

Nolathane – Leaf Spring – Rear Eye Bushing (Part No.REV164.0052)

Leaf Spring - Rear Eye Bushing

from

$25.99
A critical service item for any leaf sprung vehicle. High kilometers and heavy load carrying causes excessive wear on rubber bushings. Nolathane’s signature black bushings are made tough and offer outstanding abrasion resistance, high load bearing capability (4WD¿s, utes and towing), flexibility, increased tensile strength and chemical resistance to oil, grease, ozone and weathering.

Product Features:
  • Kit Contains: 4 bushings, 2 Tubes
See More

In-Demand Control Arms for 1998 Chevrolet Express 3500s

Select from 9 premium Control Arms parts for your 1998 Chevrolet Express 3500, with prices ranging from $13.99 to $129.99.

Driveworks – Control Arm Bushing (Part No.DW-K6395B)

Control Arm Bushing

from

$13.99
Control Arm Bushing

MOOG – Suspension Control Arm Bushing Kit (Part No.K6395)

Suspension Control Arm Bushing Kit

from

$40.99
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
  • OE-STYLE DESIGN — Engineered to match or exceed OE requirements
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • Metal rib design helps lock the inner tube within frame pocket
  • Metal surfaces are phosphate coated for corrosion protection
See More

MOOG – Suspension Control Arm Bushing Kit (Part No.K6327)

Suspension Control Arm Bushing Kit

from

$33.99
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
  • OE-STYLE DESIGN — Engineered to match or exceed OE requirements
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • Metal rib design helps lock the inner tube within frame pocket
  • Metal surfaces are phosphate coated for corrosion protection
See More

MOOG – Suspension Control Arm Bushing Kit (Part No.K6417)

Suspension Control Arm Bushing Kit

from

$76.99
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
  • OE-STYLE DESIGN — Engineered to match or exceed OE requirements
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • Metal rib design helps lock the inner tube within frame pocket
  • Metal surfaces are phosphate coated for corrosion protection
See More

Rare Parts – Control Arm Bushing (Part No.RP17073)

Control Arm Bushing

from

$129.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • Torsional rubber bushings
  • UV resistant
  • No Squeak
See More

Dorman – Suspension Control Arm Bushing Kit (Part No.533-462)

Suspension Control Arm Bushing Kit

from

$76.99
This suspension control arm bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Rare Parts – Control Arm Bushing (Part No.RP17010)

Control Arm Bushing

from

$64.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • Torsional rubber bushings
  • UV resistant
  • No Squeak
See More

Rare Parts – Control Arm Bushing (Part No.RP22205)

Control Arm Bushing

from

$24.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • Torsional rubber bushings
  • UV resistant
  • No Squeak
See More

Dorman – Suspension Control Arm Bushing (Part No.533-456)

Suspension Control Arm Bushing

from

$16.49
This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment bushing on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Most Sold 1998 Chevrolet Express 3500 Shocks and Struts

Explore our best-selling Chevrolet parts for the 1998 Express 3500 among 10 OEM and aftermarket options starting from $24.99.

Monroe – Reflex Suspension Shock Absorber (Part No.911086)

Reflex Suspension Shock Absorber

from

$109.99
Ideal for vehicles with a higher center of gravity, Monroe Reflex light truck shock absorbers feature ASD valving technology that automatically adjusts the unit to absorb the impact, helping to reduce vehicle roll and dive.

Product Features:
  • IMPROVES STABILITY – ASD (Acceleration Sensitive Damping) valving technology adjusts to impacts, reducing roll and dive for vehicles with a higher center of gravity
  • EXCEPTIONAL HANDLING – Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
  • CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown while larger reserve tube holds more fluid to run cooler
  • CONTROL AND DURABILITY – Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
  • IMPROVES PERFORMANCE – Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration
  • BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
  • BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
  • 5/8 inch Piston Rod: Heavy-duty nitrocarburized rod for long service life. On non-dust shield units only
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

Monroe – Gas-Magnum Suspension Shock Absorber (Part No.34756)

Gas-Magnum Suspension Shock Absorber

from

$69.99
Designed for midsize and full-size trucks and vans, Monroe Gas-Magnum shock absorbers provide firm control without a harsh ride. With up to twice the fluid capacity of standard 1-in. bore shocks, they work more efficiently with less effort.

Product Features:
  • DESIGNED FOR TRUCKS AND VANS – Engineered for hardworking full-size trucks and vans and features full-displaced valving on compression cycles to deliver controlled ride and handling
  • BUILT TO LAST – Heavy-duty nitrocarburized rod (non-dust shield units only) and sintered iron piston enhance durability for longer service life while self-lubricating fluid seal reduces friction against piston rod to reduce wear
  • CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
  • IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • LONGER SERVICE LIFE – Larger bore and bigger 2-in. reserve tube work together to hold more oil for greater capacity to allow the shock to work efficiently for controlled ride and longer service life
  • BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
  • Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

KYB – Gas Shock (Part No.344265)

Gas Shock

from

$86.99
Ride Comfort may be important, but restoring a vehicles Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicles original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.

Product Features:
  • KYB Recommended Orem Replacement Shock
  • The KYB Excel-G Helps Restore The Designed Control And Handling Of Your Gm Van
  • The KYB Excel-G Uses A Triple Lip Fluid Seal To Reduce The Chance Of Oil And Gas Leaking Out
  • Vehicle Specific, Hand Assembled, In-House Damping Valves Correctly Manage Tire Contact, Steering Response And Body Movement
  • Made In Use
  • Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Excel-G Helps Keep Electronic Safety Systems Performing As Designed.
  • KYB Has The Strongest And Thickest Strut Bodies And Brackets In The Industry; Minimizing Flex To Maintain Correct Alignment In All Conditions
See More

Monroe – Gas-Matic LT Suspension Shock Absorber (Part No.59519)

Gas-Matic LT Suspension Shock Absorber

from

$41.99
Gas-charged shock absorber that provides improved vehicle control for today’s light trucks, vans, full-size picks-ups and 4×4’s at an economical price.

Product Features:
  • Available for import and domestic trucks, vans, full-size pick-ups and 4×4’s
  • Gas-charged unit
  • Improved handling and control
  • Economical OE replacement
  • Meets OE product specifications
See More

Monroe – Gas-Magnum Suspension Shock Absorber (Part No.34763)

Gas-Magnum Suspension Shock Absorber

from

$104.99
Designed for midsize and full-size trucks and vans, Monroe Gas-Magnum shock absorbers provide firm control without a harsh ride. With up to twice the fluid capacity of standard 1-in. bore shocks, they work more efficiently with less effort.

Product Features:
  • DESIGNED FOR TRUCKS AND VANS – Engineered for hardworking full-size trucks and vans and features full-displaced valving on compression cycles to deliver controlled ride and handling
  • BUILT TO LAST – Heavy-duty nitrocarburized rod (non-dust shield units only) and sintered iron piston enhance durability for longer service life while self-lubricating fluid seal reduces friction against piston rod to reduce wear
  • CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
  • IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • LONGER SERVICE LIFE – Larger bore and bigger 2-in. reserve tube work together to hold more oil for greater capacity to allow the shock to work efficiently for controlled ride and longer service life
  • BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
  • Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

Monroe – Gas-Magnum Suspension Shock Absorber (Part No.34741)

Gas-Magnum Suspension Shock Absorber

from

$69.99
Designed for midsize and full-size trucks and vans, Monroe Gas-Magnum shock absorbers provide firm control without a harsh ride. With up to twice the fluid capacity of standard 1-in. bore shocks, they work more efficiently with less effort.

Product Features:
  • DESIGNED FOR TRUCKS AND VANS – Engineered for hardworking full-size trucks and vans and features full-displaced valving on compression cycles to deliver controlled ride and handling
  • BUILT TO LAST – Heavy-duty nitrocarburized rod (non-dust shield units only) and sintered iron piston enhance durability for longer service life while self-lubricating fluid seal reduces friction against piston rod to reduce wear
  • CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
  • IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • LONGER SERVICE LIFE – Larger bore and bigger 2-in. reserve tube work together to hold more oil for greater capacity to allow the shock to work efficiently for controlled ride and longer service life
  • BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
  • Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

Monroe – Shock-Mate Suspension Shock Absorber Bellows (Part No.SA1997)

Shock-Mate Suspension Shock Absorber Bellows

from

$26.99
Monroe Shock-Mate Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:
  • Protects the shock’s piston rod from damage
  • Universal design for easy installation
  • Tie-strap included for a secure fit
  • Constructed from high quality urethane for maximum durability
  • Multiple color choices available
See More

Monroe – Shock-Mate Suspension Shock Absorber Bellows (Part No.SA1998)

Shock-Mate Suspension Shock Absorber Bellows

from

$24.99
Monroe Shock-Mate Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:
  • Protects the shock’s piston rod from damage
  • Universal design for easy installation
  • Tie-strap included for a secure fit
  • Constructed from high quality urethane for maximum durability
  • Multiple color choices available
See More

Monroe – Gas-Matic LT Suspension Shock Absorber (Part No.59511)

Gas-Matic LT Suspension Shock Absorber

from

$53.99
Gas-charged shock absorber that provides improved vehicle control for today’s light trucks, vans, full-size picks-ups and 4×4’s at an economical price.

Product Features:
  • Available for import and domestic trucks, vans, full-size pick-ups and 4×4’s
  • Gas-charged unit
  • Improved handling and control
  • Economical OE replacement
  • Meets OE product specifications
See More

KYB – High Pressure Monotube Gas Shock (Part No.KG5478)

High Pressure Monotube Gas Shock

from

$103.99
The KYB Gas-a-just monotube shock absorber has additional performance advantages over the traditional twin-tube design: It can instantly, automatically adjust to your performance needs and never experiences fade due to aeration. The KYB Gas-a-just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and control, and a second high-pressure nitrogen gas area with a floating piston that provides a comfortable ride during normal driving and adds instant performance on demand.

Product Features:
  • Adds Up To 25% More Damping Performance Over Original Equipment Shocks
  • Components And Valving Designed Specifically For Gm Trucks
  • Gas-A-Just Monotubes Include Additional Damping Over One Design For Vehicles That Work, Tow, And Have Larger, Heavier Tires & Wheels
  • High Pressure Monotube Design Separates The Gas And Oil For Fade Free Operation And Instant Response
  • Fluid Leaking Can Be A Cause Of Shock Failure, The KYB Gas-A-Just Has An Ultra-Smooth Triple Chrome Plated Chrome Piston Rod To Reduce Seal Wear
  • The Higher Gas Pressure Of The KYB Gas-A-Just Responds Quickly To Improve Steering Response
  • Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Gas-A-Just Helps Keep Electronic Safety Systems Performing As Designed.
See More

Top-Rated Suspension Parts Brands For Your 1998 Chevrolet Express 3500

Shop for the best-rated brands offering Suspension Parts and other products for your 1998 Chevrolet Express 3500s. Below you’ll find some of our best rated Suspension Parts from Moog, Monroe, and Dorman, and more. Suspension Parts from these brands that fit a 1998 Express 3500 start at just $13.99 and are rated as high as 4.5 stars. OEM and aftermarket Suspension Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Moog 1998 Chevrolet Express 3500 Suspension Parts

When it comes to maintaining or upgrading your 1998 Chevrolet Express 3500, using quality Suspension Parts is essential to ensure durability and a perfect fit. Moog ticks all of those boxes. We offer a wide selection of Moog Suspension Parts, specifically designed for the 1998 Chevrolet Express 3500. With over 3 Moog brand Suspension Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $19.79, with an average price of just $31.59. Plus, with over 11 customer reviews and an average rating of 4.5 stars, you can trust that our Moog Suspension Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Suspension Control Arm Bushing Kit
from $33.99
(3)
Suspension Control Arm Bushing Kit
“Excellent fit for my 01 express van, had to buy a new tool to remove and install them, but it was worth it”
Suspension Control Arm Bushing Kit
from $40.99
(5)
Suspension Control Arm Bushing Kit
“Yes”
Coil Spring Insulator
from $19.79
(3)
Coil Spring Insulator
“Good Quality.. good ride.”

Popular Monroe 1998 Chevrolet Express 3500 Suspension Parts

Monroe auto parts is one of the highest quality Suspension Part brands in the market. Any 1998 Chevrolet Express 3500 owner should feel confident when installing genuine Monroe parts in their vehicle. To ensure the best fit and performance for your 1998 Express 3500, Advance Auto Parts carries a full inventory of 3 Monroe Suspension Parts. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Monroe Suspension Parts range from $69.99 to $213.99, plus, with more than 16 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Suspension Parts below will deliver on both quality and value.
Reflex Suspension Shock Absorber
from $109.99
(7)
Reflex Suspension Shock Absorber
“Put these on my 2007 box van ,really made a difference. Great shock”
Load Adjusting Rear Suspension Shock Absorber and Coil Spring Assembly
from $213.99
(8)
Load Adjusting Rear Suspension Shock Absorber and Coil Spring Assembly
“I put these Sensa-Trac Load Adjusters on the sagging rear of my 97 Yukon. They raised it back up about 1.5″ and stiffened the ride just the way I like”
Gas-Magnum Suspension Shock Absorber
from $69.99
(1)
Gas-Magnum Suspension Shock Absorber
“Good value and work well”

FAQs for 1998 Chevrolet Express 3500 Suspension Parts

Which Suspension Parts are best-sellers for 1998 Chevrolet Express 3500s?

Out of 45 Suspension Parts that fit 1998 Chevrolet Express 3500s, the following parts are the top sellers:

What’s the price range for 1998 Chevrolet Express 3500 Suspension Parts?

Suspension Part prices for the 1998 Chevrolet Express 3500 start at $13.99 and go up to $1,043.00 for the most premium parts.

What’s the average price of a Suspension Part for a 1998 Chevrolet Express 3500?

The average price for Suspension Parts for the 1998 Chevrolet Express 3500 is $139.08. Keep in mind the variety of part types within our Suspension Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Suspension Parts for other Chevrolet Express 3500 model years?

Yes, we currently carry Suspension Parts for 28 model years of Chevrolet Express 3500s between 1996 and 2025. Suspension Parts are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Suspension Parts for my 1998 Chevrolet Express 3500?

The cheapest 1998 Chevrolet Express 3500 Suspension Parts we carry in stock are:

What are the top-rated Suspension Parts that fit the 1998 Chevrolet Express 3500?

Out of 802 reviews by customers, our 1998 Chevrolet Express 3500 Suspension Parts have an average customer rating of . These are some of the highest-rated Suspension Part types for the 1998 Chevrolet Express 3500 and their top-rated products:

What types of Suspension Parts do you sell for my 1998 Chevrolet Express 3500?

As of 3/1/26, these are some of the most in-demand types of Suspension Parts for a 1998 Chevrolet Express 3500:

Can I get help with 1998 Chevrolet Express 3500 Suspension Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Suspension Parts and more.

What is your return policy for Chevrolet Express 3500 Suspension Parts?

Advance Auto Parts keeps returns simple. For new Chevrolet Express 3500 Suspension Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.