1998 Chevrolet Express 3500 Differentials

Essential 1998 Chevrolet Express 3500 Differentials

Yukon Gear – Replacement Outer Oil Baffle For Dana 80 (Part No.33004)

Replacement Outer Oil Baffle For Dana 80

from

$19.99
Product Features:
  • Oil baffle
  • Fits Dana Spicer 80
See More

Motive Gear – Differential Carrier Shim Kit (Part No.GM9.5SSK)

Differential Carrier Shim Kit

from

$21.99


Product Features:
  • KIT SHIM SIDE 9.5″ GM
See More

Yukon Gear – GM 10.5′ 14 Bolt Truck Cover Gasket (Part No.23016)

GM 10.5' 14 Bolt Truck Cover Gasket

from

$13.99
14T cover gasket.

Product Features:
  • Cover gasket
  • Fits GM 10.5″ 14 bolt truck
See More

Richmond Gear – RngPnn (Part No.79-0041-1)

RngPnn

from

$613.99
RngPnn

Yukon Gear – Steel Cover For Dana 70 (Part No.32322)

Steel Cover For Dana 70

from

$149.99
Product Features:
  • Fits Dana Spicer 70
  • Steel
See More

FAG US – CUP (Part No.M802011)

CUP

from

$15.29
CUP

Yukon Gear – Pinion Install Kit For ’99 & Newer 10.5" GM 14 Bolt Truck Differential (Part No.13106)

Pinion Install Kit For '99 & Newer 10.5" GM 14 Bolt Truck Differential

from

$449.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits 1998 and up GM 10.5″ 14 bolt truck
  • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Motive Gear – Differential Pinion Shim Kit (Part No.1102)

Differential Pinion Shim Kit

from

$9.49


Product Features:
  • KIT SHIM PINION
See More

Yukon Gear – Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (Part No.33164)

Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement

from

$3.99
Product Features:
  • Pinion nut washer for Chrysler 7.25″, 8.25″, 8.75″ with 29 spline pinion, Jeep JK rear, Dana Spicer 60, 70, 70U and 70HD and 2007-2010 Ford 10.5″
See More

Pro-King – Differential Cross Shaft (Part No.742G930)

Differential Cross Shaft

from

$2.79
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

USA Standard Gear – Master Overhaul Kit Dana 60 and 61 Rear Differential (Part No.37021)

Master Overhaul Kit Dana 60 and 61 Rear Differential

from

$253.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits Dana Spicer 60 rear
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, oil baffles and slingers, thread locker, marking compound with brush and gasket.
See More

Motive Gear – Differential Master Bearing Kit – Timken (Part No.R9.5GRMKT)

Differential Master Bearing Kit - Timken

from

$191.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • MASTER KIT GM 9.5″ 14 BOLT
See More

Valvoline – Transfer Case Fluid, 1 Quart (Part No.855459)

Transfer Case Fluid, 1 Quart

from

$14.99
Valvoline Multi-Vehicle Transfer Case Fluid is a full synthetic product meeting the performance needs for transfer cases recommending Ford XL-12 and GM Auto Trak II specifications or ATF fluids (DEX/MERC, ATF +4, etc).

Product Features:
  • Recommended for use in most Ford, GM and FCA (Dodge, Jeep) models
  • Formulated to help prevent gear wear and protect against rust and corrosion
  • Formulated to deliver enhanced protection against deposits
  • Helps provide better protection during extreme operating conditions
See More

Yukon Gear – Bearing Race Driver (Part No.56012)

Bearing Race Driver

from

$215.99
Bearing race driver for rear GM 9.5″, 9.25″ IFS, and Ford 9″ HD. (TK HM804810). No return.

Product Features:
  • Bearing race driver
  • Fits HM804810 race
  • All steel construction
See More

Powertrax – No-Slip Traction System (Part No.9207053000)

No-Slip Traction System

from

$591.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Yukon Gear – Differential (Part No.26045)

    Differential

    from

    $1175.00
    Differential

    Yukon Gear – Differential Carrier (Part No.57015)

    Differential Carrier

    from

    $251.99
    Differential Carrier

    Yukon Gear – Replacement Cross Pin Shaft For Dana 60, Fits Standard Open And Trac Loc Posi (Part No.33314)

    Replacement Cross Pin Shaft For Dana 60, Fits Standard Open And Trac Loc Posi

    from

    $26.99
    Product Features:
    • Cross pin shaft
    • Fits Dana Spicer 60
    See More

    Yukon Gear – Dana 60 & Dana 70 Power Lok Case Bolt (Part No.33236)

    Dana 60 & Dana 70 Power Lok Case Bolt

    from

    $7.99
    Dana 60 & Dana 70 Power Lok case bolt.

    Product Features:
    • Power Lok case bolt for Dana Spicer 60 and 70
    • 7/16 x 14 thread
    • 3.5″ long
    • 9/16″ hex head
    See More

    Yukon Gear – Differential (Part No.26046)

    Differential

    from

    $994.99
    Differential

    Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)

    Dana 60, Dana 70 & Dana 80 Cover Bolt

    from

    $5.99
    3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

    Product Features:
    • Cover bolt for Dana Spicer 60, 70 and 80
    • 3/8″
    See More

    Yukon Gear – Set Up Bearing (Part No.56080)

    Set Up Bearing

    from

    $198.99
    NO RETURN HM807046 SET-UP Bearing (1 SINGLE Bearing) for Dana 80 , 11.5AAM , 4.125″ OD .

    Product Features:
    • Set up bearing
    • Fits HM807046 pinion bearing
    • Easily slips on and off pinion journal to allow for pinion depth adjustment
    See More

    Motive Gear – Differential Crush Sleeve (Part No.14012691)

    Differential Crush Sleeve

    from

    $2.99


    Product Features:
    • CRUSH SLEEVE 9.5 GM 14BLT MIN ORDER 1000
    See More

    Yukon Gear – 10.5" GM 14 Bolt Truck Ring Gear Bolt (Part No.33050)

    10.5" GM 14 Bolt Truck Ring Gear Bolt

    from

    $11.99
    10.5″ GM 14 bolt truck ring gear bolt 4.56 & up. 9/16″ x 18. 2.522″ overall length.

    Product Features:
    • Ring gear bolt for GM 10.5″ 14 bolt truck
    • 4.56 and up ratio
    • 1/2″ x 18 thread
    • 2.522″ overall length
    See More

    Yukon Gear – Standard Open Spider Gear Kit For GM 10.5" And 14T With 30 Spline Axles (Part No.16044)

    Standard Open Spider Gear Kit For GM 10.5" And 14T With 30 Spline Axles

    from

    $315.99
    Yukon standard open spider gear kit for GM 10.5″ and 14T with 30 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

    Product Features:
    • Spider gear kit
    • Fits GM 10.5″ 14 bolt truck open differential
    • Includes two side gears, four pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
    See More

    Yukon Gear – Steel Spool For Dana 80 With 35 Spline Axles, 4.10 & Up (Part No.32172)

    Steel Spool For Dana 80 With 35 Spline Axles, 4.10 & Up

    from

    $747.99
    Yukon Performance steel spool for 8Dana 80 with 35 spline axles, 4.10 & up. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.

    Product Features:
    • Fits Chrysler Dana Spicer 80 with 35 spline axles
    • 4.10 and up ratio only
    • Provides 100% traction to both wheels at all times
    • Not recommended for street driven vehicles
    See More

    Motive Gear – Differential Gear Install Kit (Part No.GM11.5IK)

    Differential Gear Install Kit

    from

    $74.99
    All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
    See More

    Motive Gear – Differential Gear Install Kit (Part No.GM9.5IKL)

    Differential Gear Install Kit

    from

    $79.99


    Product Features:
    • MINI INSTALL KIT-GM9.5/CHRY9.25 FRT
    See More

    1998 Chevrolet Express 3500 Differentials

    Maybe you’re in the middle of a full rebuild of that 1998 Chevrolet Express 3500. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 266 different Differentials in our inventory ranging from $1.89 to $2,324.99. That means you can find the exact parts or products you need to keep that 1998 Chevrolet Express 3500 running smoothly.

    Differentials are only as good as their brand. We stock 18 different brands to make sure you have plenty of trusted parts to choose from for your 1998 Chevrolet Express 3500. Valvoline, Royal Purple, and Driveworks are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

    We know you’ll find the perfect Differentials for your 1998 Chevrolet Express 3500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 3,387 reviews in this category, some of the top rated parts include Ring and Pinion Bearing Installation Kit with 3.8 stars and Rear Differential Cover with 4.4 stars.

    So if you’re in the market for aftermarket Differentials to keep your 1998 Chevrolet Express 3500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

    Differentials Brands To Make Your 1998 Chevrolet Express 3500 Last

    Simple repair, complete replacement, or a full rebuild. No matter the job, your 1998 Chevrolet Express 3500 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Express 3500 the best it can be. Be sure to browse some of our top Differentials brands and parts.

    FAQs for 1998 Chevrolet Express 3500 Differentials

    What are the most purchased Differentials for the 1998 Chevrolet Express 3500?

    Out of 266 Differentials for the 1998 Chevrolet Express 3500, the most popular in our inventory are:
    Tapered Cone/Cup Wheel Bearing Set
    from $13.99
    (14)
    Tapered Cone/Cup Wheel Bearing Set
    Front Differential Pinion Bearings
    Differential Cover Gasket
    from $6.79
    (13)
    Differential Cover Gasket
    Rear Differential Cover Gaskets

    What are the top-rated 1998 Chevrolet Express 3500 Differentials?

    Top-rated Differentials for your 1998 Chevrolet Express 3500 based on customer reviews/ratings are:
    Ring and Pinion Bearing Installation Kit
    from $282.99
    (255)
    Ring and Pinion Bearing Installation Kit
    “good price”
    Rear Differential Cover
    from $36.99
    (15)
    Rear Differential Cover
    “For as it should”
    Bearings
    from $23.99
    (7)
    Bearings
    “Good price”