1998 Chevrolet Camaro Performance and Racing Products

Below you will find various in-demand Chevrolet Performance and Racing Products, components and accessories for your 1998 Camaro. Advance Auto Parts has popular Camaro parts like Performance Engines, Performance Oil Filters, Performance Air Filters and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Camaro model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 1998 Chevrolet Camaro Performance and Racing Products below and start saving instantly.

Popular 1998 Chevrolet Camaro Performance and Racing Products Categories

Performance Oil Filters

Performance Engine Coolant Thermostats

Performance Starters

Performance Air Filters

Performance Coils

Performance Exhaust Mufflers

Performance Exhaust Headers

Performance Shifters

Performance Engine and Transmission Mounts

Performance Engine Water Pumps

Performance Engine Cylinder Head Gaskets

Performance Engine Camshaft and Lifter Kits

Performance Engine Timing Sets and Components

Performance Engine Valve Springs

Performance Chassis Bushing Kits

Performance Flywheel and Flexplates

Performance Exhaust Manifold Gaskets

Performance Posi Units and Components

Performance Upper Performance Control Arm Bushings

Performance Engine Rocker Arms

Performance Engine Camshafts

Performance Ring and Pinions

Performance Ignition Parts

Performance Lower Control Arm Bushings

Performance Engine Valve Lifters

Performance Sway Bar Bushings

Performance Tie Rod End Boots

Performance Engine Push Rod Guideplates

Performance Engine Push Rods

Performance Engine Valve Spring Retainer

Performance Torque Converters

Performance Ignition Systems

Performance Nitrous Systems

Performance Engine Camshaft Bolts

Performance Engine Valvetrain Kit

Essential Performance and Racing Products for 1998 Chevrolet Camaros

from

$411.99

Assure a steady, precise metered flow of nitrous and fuel for reliability. Backed with years of laboratory research, as well as dyno and drag strip testing. NOS Injector Plates are available for those who want to build their own system or upgrade their current nitrous system without having to go through the expense of a new complete system. Unless specified, NOS Injector plates incorporate a low profile 1/2 inch thick design and are constructed of solid billet or die cast aluminum with a durable black finish. Included are all applicable gaskets, studs, jets and plumbing.

Product Features:

Convert Existing Nitrous Kit To New Technology

from

$108.99

Product Features:

MINI SPOOL GM12 BOLT CAR & TRUCK STRANGE # 088430

from

$37.99

This Mr. Gasket Water Pump Bolt Set includes chrome plated grade 5 hex head fasteners to install the water pump on your small or big block Chevrolet with the long style water pump. Includes four 3/8 inch-16 x 2 inch bolts with four 3/8 inch AN washers. AN washers have no exposed shoulder which offers a professional appearance.

Product Features:

Chrome Plated
Grade 5
AN washers with no exposed shoulder for a professional appearance

from

$184.99

The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

from

$20.99

Mr. Gasket cam locking plates feature a steel retainer plate designed to secure the cam gear bolts from coming loose and backing out, preventing costly engine damage. Retainer plate fits under bolt heads allowing tabs to be bent against hex head flats creating a secure positive lock.

Product Features:

Black oxide finished steel
Includes (3) grade 5 bolts & locking plate
Fits Chevrolet Small and Big Block without OE roller cam
Tabs bend up around bolt head to secure

from

$1201.99

Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.

Product Features:

Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
Best with aftermarket converters and more rear gear.
Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.

from

$311.99

Product Features:

Incredible Improvement in Control
Maintains Proper Caster and Camber Alignment
Increase in Handling and Control
Greatly Reduce Wheel Hop on Quick Acceleration
Even Braking Control is Improved
Better Suspension Stability

from

$28.99

Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$61.99

For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$9.99

Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$165.99

Magnum Pushrods from COMP Cams offer an affordable solution for your .080″ wall chromemoly pushrod needs. Designed to withstand the stresses of a high performance engine, Magnum Pushrods are head-treated for extended durability and have precision formed, reinforced ends. Magnum Pushrods are black-oxide finished with their part number and length laser etched onto the surface for easy identification.

Product Features:

3/8″ Diameter, 7.800″ Length
Magnum Pushrods for Small Block Chevy
One-piece .080″ wall chromemoly steel tubing
Heat-treated for extended durability and guide plate compatibility
Precision formed and reinforced pushrod end

from

$39.99

Reduced Travel OE-Style Hydraulic Roller Lifter for ’87+ SBC, LT/LS and V6

from

$483.99

The B&M Quicksilver features a ratcheting action for positive shifts, Chrome Knob, neutral safety switch, NHRA/IHRA approved Reverse Lockout. Fits Most 3 and 4 speeds.

Product Features:

Universal Floor Mount Application
Base Trimmed For Custom Fit
Cable Operated
Quick Installation
Accurate Shifting

from

$49.99

Fits Chevy small block 265-400 CID, Chevy big block 396-454 CID, & 90 degree Chevy V6. The Starter Motor Heat Shield is built with heat-resistant material sandwiched between two aluminum plates. The shield protects the starter from heat buildup from the exhaust system, especially important when using headers.

Product Features:

Designed to prevent starter overheat due to extreme exhaust temperature
Heat resistant material sandwiched between 2 aluminum plates
Protects Starter From High Temperatures
Made Of 2 Sheets Of Aluminum Heat Resistant Center
Natural Finish

from

$107.99

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$79.99

Stock style replacement modified HEI coil dust cover. Used on 8 cylinder vehicles only.

Product Features:

Externally mounted coil
Increases reliability
Increase performance
High quality plastic
Resist spark loss
Use brass conductors
Low resistance connections
No modifications

from

$92.99

Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:

Service Part
No Moving Parts To Wear Out
Self Contained Unit
Can Drive OEM
Can Drive High Performance Ignition Coils

from

$85.99

This 7° steel retainer for GM Gen III applications with #26915 or #26918 Beehive Valve Springs is precision machined from 4140 chromemoly steel and finished in black oxide. This precision retainer is specifically designed for positive location when combined with COMP Cams high-quality valve springs.

Product Features:

7° angle retainers for 1.055″ diameter valve springs, stock diameter valve stems
O.D. – 1.030″, Step 1 – .640″
Precision machined from 4140 chromemoly steel and finished in black oxide
Designed for positive location when combined with COMP Cams high-quality valve springs

from

$348.99

Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:

For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.

from

$584.99

Ultra Pro Magnum XD Rockers with 1.7 Ratio for Chevrolet Big Block with 7/16" Stud

from

$350.99

HYDRAULIC – Thumpr: High performance street, stock converter ok, best with 2000+ converter and gears. Choppy/thumping idle.

Product Features:

HYDRAULIC – Thumpr: High performance street, stock converter ok, best with 2000+ converter and gears. Choppy/thumping idle.
279/296 Advertised Duration, 227/241 Duration @ .050″, .498″/.483″ Lift, 107 Lobe Separation
Valve spring upgrade required

from

$44.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
Raises combustion sealing force to roughly three times that of standard head gaskets.
Steel wire rings for the greatest combustion seal strength.
Not intended for use in emission controlled vehicles.

from

$365.99

Product Features:

Fuel Economy From The Engine
Leak Test For Max Performance
Mandrel-Formed Power Plenum
Leakproof O-Ringed Port Seals
Include All Mounting Hardware

from

$25.99

Hooker’s precision-matched Super Competition header gaskets provide a sure fit and unmatched exhaust sealing. This OEM quality gasket is constructed of a thick ,.060 inch, high temperature, non-asbestos fiber laminate with a perforated steel core, which provides a superior grip and adhesion. This construction also contributes to exact fit compliance between the cylinder head and header flange, offering excellent sealing properties during extreme temperature and operating conditions.

Product Features:

Tear Resistant
Precisely Cut To Match Header

from

$83.99

K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable and engineered to last for the entire lifespan of your vehicle. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!

Product Features:

REUSABLE K&N FILTER SAVES YOU MONEY: A K&N washable, reusable air filter will save you up to $125 vs. purchasing multiple disposable filters (compared to MSRP in USD of corresponding OE filters for 200,000 miles of highway driving)
CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (5 years based on the average miles driven per year of 15,000 miles)
RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
REDUCES WASTE: Over 200 million disposable air filters and their packaging waste wind up in landfills each year- reusable filters help reduce waste in our landfills
ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
EASY INSTALLATION: K&N Air Filters are pre-oiled and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants

from

$69.99

Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:

For Use With Cast Iron Heads
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Use with Original Equipment Heads Only

from

$44.99

MotorMt

from

$749.99

Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.

Product Features:

3400-3800 RPM
Small And Big Blocks
Serious Performance
Furnace Brazed
Fully Balanced

Upgrade your 1998 Chevrolet Camaro with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1998 Chevrolet Camaro, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Performance and Racing Products are key to keeping your Camaro functioning at its best. At Advance Auto Parts, we offer a wide selection of 125 Performance and Racing Products for the 1998 Chevrolet Camaro, designed to meet your needs without breaking the bank. From Performance Engine replacements to Performance Oil Filters upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1998 Chevrolet Camaro at great prices. Our Performance and Racing Products inventory for this model ranges from just $8.99 to $1,870.00, with an average price of $303.82. Our 125 Performance and Racing Products in stock come from 15 trusted brands, so you’re sure to find the right part for your 1998 Chevrolet Camaro without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1998 Chevrolet Camaro, we stock popular OEM and aftermarket Performance and Racing Products from top names like K&N, Flowmaster Inc., B & M, and more. K&N Performance and Racing Products start at just $17.99 and boast an impressive 4.8 stars average rating from customers. Flowmaster Inc. and B & M also bring quality to the table, with Performance and Racing Products available starting at $99.99, and at an average 4.4 stars rating. With 267 customer reviews and counting, our 1998 Chevrolet Camaro Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1998 Chevrolet Camaro is always ready to roll. We’re committed to providing you with everything you need to keep your Camaro in top shape, all in one place. Start shopping confidently below for your 1998 Chevrolet Camaro!

Best-Selling Performance Engines for 1998 Chevrolet Camaros

Enhance the driving experience in your Chevrolet with 72 quality Performance Engine components, starting at $8.99.

show more show less

from

$528.99

This Beehive Valve Spring Kit for LS engines is designed for hydraulic roller cams and includes carefully matched Beehive Springs, steel retainers, locks, seals and spring seats. With a .625″ maximum lift, these Beehive Valve Springs deliver increased valve train stability and a much lighter valve train. This is achieved with less spring pressure for better valve control and reduced weight of both the spring and retainer. The unique Beehive shape handles valve train stress more efficiently to eliminate damaging harmonics and increases high RPM horsepower and durability. The oval/multi-arc wire shape places the maximum area of the wire at the point of highest stress to handle valve train stress more efficiently and allow better heat dissipation for longer life.Kit Includes:26918-16 Beehive Valve Springs774-16 Steel Retainers623-16 7° Steel Valve Locks511-16 Valve Seals4705-16 Spring Seats

Product Features:

Kit includes part #26918-16 Beehive valve springs and matching steel retainers, 7° valve locks, valve seals and spring seats
Kits designed for hydraulic roller cams
.625″ maximum lift springs

from

$541.99

HYDRAULIC ROLLER – XFI XE-R: High rpm street/strip with XE-R lobe designs. Requires custom tuning.

Product Features:

HYDRAULIC ROLLER – XFI XE-R: High rpm street/strip with XE-R lobe designs. Requires custom tuning.
273/279 Advertised Duration, 224/230 Duration @ .050″, .581″/.588″ Lift, 114 Lobe Separation
Use Beehive Valve Spring part No. 26918-16 with this camshaft

from

$449.99

Similar in performance to the Holeshot series, the Tork Master is B&M’s lowest cost torque converter. The Tork Master is an excellent all-around performance street converter. The best ‘value priced’ street converters available.

Product Features:

New Precision Pump Drive Tube
Pressure Tested
Fully Balanced
Needle Thrust Bearing
New Thrust Washer

from

$36.99

Designed to open at 160 degrees every time, regardless of engine rpm, and it’s high-flow design and brass and copper construction eliminate the damaging effects of cycling when you’re stuck in stop-and-go traffic. It includes the rubber gasket and has a pressure relief valve.

Product Features:

Opens sooner than stock at 160 degrees
High flow design for performance applications
Includes rubber o-ring seal/gasket
Incorporates pressure relief valve

from

$500.99

VALVE SPRING KIT, FOR LS 1.310″ BEEHIVE 1 KT

from

$534.99

With a .625″ maximum lift, these Beehive Valve Springs were designed for hydraulic roller cams in LS1, LS2 and LS6 engines. COMP Cams Beehive Valve Springs deliver increased valve train stability and a much lighter valve train. This is achieved with less spring pressure for better valve control and reduced weight of both the spring and retainer. The unique Beehive shape handles valve train stress more efficiently to eliminate damaging harmonics and increases high RPM horsepower and durability. The oval/multi-arc wire shape places the maximum area of the wire at the point of highest stress to handle valve train stress more efficiently and allow better heat dissipation for longer life. Because of the unique Beehive design, the valve train can handle more RPM and more aggressive cam profiles.

Product Features:

Seat pressure: 125 lbs. @ 1.800″, Open Pressure: 367 lbs. @ 1.150″
O.D.: 1.075″ (Top) 1.310″ (Bottom), I.D.: .650″ (Top) .885″ (Bottom)
Designed for hydraulic roller cams
.625″ maximum lift, 1.310″ O.D.
Originally designed for LS engine applications but will work in 5.7L Hemi engines and many others

from

$85.99

7° angle retainers for 1.055″ diameter valve springs, stock diameter valve stems
O.D. – 1.030″, Step 1 – .640″
Precision machined from 4140 chromemoly steel and finished in black oxide
Designed for positive location when combined with COMP Cams high-quality valve springs

from

$61.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.

Product Features:

Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
Raises combustion sealing force to roughly three times that of standard head gaskets.
Steel wire rings for the greatest combustion seal strength.
Not intended for use in emission controlled vehicles.

XFI RPM 212/218 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV

from

$1870.00

XFI RPM 212/218 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV

GM LS Dual Valve Spring Kit with Titanium Retainers

from

$1208.00

GM LS Dual Valve Spring Kit with Titanium Retainers

XFI RPM 216/220 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV

from

$1195.00

XFI RPM 216/220 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV

XFI RPM 206/212 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV

from

$1195.00

XFI RPM 206/212 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV

Endure-X Solid Roller Lifter Set for GM LS GEN III LS1/LS2/LS6/LS7/LSX

from

$1161.00

Endure-X Solid Roller Lifter Set for GM LS GEN III LS1/LS2/LS6/LS7/LSX

GM LS Dual Valve Spring Kit with Tool Steel Retainers

from

$1020.00

GM LS Dual Valve Spring Kit with Tool Steel Retainers

from

$868.99

ENGINE VALVE LIFTER

Mutha' Thumpr 227/241 Hydraulic Roller Cam for GM LS GEN III/IV

from

$805.99

Mutha’ Thumpr 227/241 Hydraulic Roller Cam for GM LS GEN III/IV

Big Mutha' Thumpr 235/249 Hydraulic Roller Cam for GM LS GEN III/IV

from

$805.99

Big Mutha’ Thumpr 235/249 Hydraulic Roller Cam for GM LS GEN III/IV

Thumpr 219/233 Hydraulic Roller Cam for GM LS GEN III/IV

from

$805.99

Thumpr 219/233 Hydraulic Roller Cam for GM LS GEN III/IV

Xtreme Energy 191/201 Hydraulic Roller Cam for GM 3800/3.8L V6

from

$787.99

Xtreme Energy 191/201 Hydraulic Roller Cam for GM 3800/3.8L V6

Xtreme Energy 210/220 Hydraulic Roller Cam for GM 3800/3.8L V6

from

$787.99

Xtreme Energy 210/220 Hydraulic Roller Cam for GM 3800/3.8L V6

from

$764.99

ENGINE ROCKER ARM

from

$764.99

ENGINE ROCKER ARM

from

$719.99

COMP Cams GM LS Series RPM Valve Train Upgrade Kits replace stock valve train components for more usable horsepower and a higher rpm operating range. This kit includes Hi-Tech Pushrods, Beehive Valve Springs and Titanium Retainers.

Product Features:

For GM LS series applications
includes Hi-Tech Pushrods, Beehive Valve Springs and Titanium Retainers
Replaces stock valve train components for more usable horsepower and higher rpm range

from

$670.99

HoleShot 2400 for GM 1993 to 1996 TH700R4 (30 spline) and 1984 to 1993 4L60E (30 spline) Application: HoleShot 2400 for GM 1993 to 1996 TH700R4 (30 spline) and 1984 to 1993 4L60E (30 spline) A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benefits in vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low end power and torque. The high stall converter allows the engine to launch the car at higher rpm where more torque is available. The Holeshot is generally a very good choice for the typical street machine that is looking for better launch capability and more strength. Street rods with modified engines will also benefit from a Holeshot converter. If your vehicle is equipped with a plate type nitrous system, you will need a Nitrous Holeshot!! Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Furnace brazed impeller. New precision steel alloy pump drive tube. New heavy duty needle bearing between stator and impeller (not a thrust washer). Needle bearing between stator and turbine. Furnace brazed turbine. Dual pattern drive lugs on some GM Holeshots. New turbine hub. New springs and rollers in stator.

Product Features:

Furnace Brazed Impeller
Steel Alloy Pump Drive Tube
Heavy Duty Needle Bearing
Between Stator and Turbine
Furnace Brazed Turbine
New Turbine Hub
New Springs/Rollers In Stator

Most Popular 1998 Chevrolet Camaro Performance Oil Filters

Customize your Chevrolet with 2 Performance Oil Filters products like Performance Oil Filters, all priced under $17.99.

show more show less

from

$17.99

K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

Product Features:

HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
EASY TO REMOVE: Fast and easy Wrench-Off removal
HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers

from

$17.99

HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
EASY TO REMOVE: Fast and easy Wrench-Off removal
HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers

Top Picks for 1998 Chevrolet Camaro Performance Air Filters

Upgrade Chevrolet Camaros with top-quality Performance Air Filters parts, including 1 OEM and aftermarket selections for your 1998 model.

show more show less

from

$83.99

K&N performance High-Flow Air Filters are engineered to improve engine performance. Unlike disposable paper filters which must be frequently replaced, K&N Air Filters are washable, reusable, and engineered to last for the life of your vehicle. K&N air filters are backed by our famous 10-Year/Million Mile Limited Warranty, and they provide an environmentally friendly way to reduce landfill waste by avoiding disposable filters. Engineered to fit easily into your factory air box, installation can be completed in a matter of minutes! K&N develops and tests each product on the world┐s toughest race tracks, so we can bring the highest level of performance to your daily driving. Join the millions of customers who have saved money and improved vehicle performance by upgrading to K&N filtration.

Product Features:

ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (based on the average miles driven per year of 15,000 miles)
ULTIMATE LONGEVITY: No-hassle lifetime warranty on stock replacement K&N air filters- limitations apply
EASY INSTALLATION: K&N Air Filters are pre-treated and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
ECO-FRIENDLY: Using a washable, reusable engine air filter helps reduce replacement air filter waste- a K&N air filter is designed to last longer than 10 or more disposable filters
MADE IN USA: K&N Air Filters are proudly made in the USA for trusted quality & reliability

In-Demand Performance Ignition Products for 1998 Chevrolet Camaros

Select from 5 premium Performance Ignition Products parts for your 1998 Chevrolet Camaro, with prices ranging from $33.99 to $316.99.

show more show less

from

$83.99

The updated Fuel Pump Booster is an easy way to maintain the proper fuel pressure on your car after adding a power adder such as a turbo or supercharger. The new model allows you to make your boost adjustments through a PC for improved control and accuracy. The Booster ensures that the engine receives the fuel it needs to make up for the increase in air being pumped into the intake manifold. It will increase the voltage to the factory fuel pump in proportion to manifold boost pressure in order to maintain the proper fuel delivery. The amount of increase is adjustable from a range of an additional 1.5 -22 volts up to 30 psi which can all be set and adjusted from your PC with MSD’s easy to use Windows based software. The MSD Booster will wire to the factory fuel pump relay or with a secondary booster pump.

Product Features:

Direct performance replacement
For GM 2 Tower Coils Used From Mid 1980s To Late 1990s
80:1 turns ratio
Lower Primary Resistance Produces High Voltage Output
Works w/Stock Ignition As Well As MSD Ignitions
CARB E.O. Approved

from

$92.99

Service Part
No Moving Parts To Wear Out
Self Contained Unit
Can Drive OEM
Can Drive High Performance Ignition Coils

from

$33.99

Product Features:

Service Part
Makes Connections Quick And Easy

from

$316.99

For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.

Product Features:

Replacement crank trigger wheel for small block Chevy
Absolutely the most accurate way to trigger the ignition
The non-magnetic pickup cannot be false triggered
Powerful magnets are embedded in a billet aluminum trigger wheel

from

$199.99

Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:

Glass Filled Polyester Case
Longer Spark Duration
Increased Performance
No Energy Loss Due To Arcing
Includes Brass Contact Terminal

Most Sold 1998 Chevrolet Camaro Performance Exhaust Products

Explore our best-selling Chevrolet parts for the 1998 Camaro among 9 OEM and aftermarket options starting from $35.49.

show more show less

from

$134.99

Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four-inch case street muffler we’ve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$181.99

The 80 series is a cross-flow design for applications where the muffler is mounted transversely behind the rear end. Delivering an aggressive muscle car sound both inside and outside the vehicle, this is an excellent replacement for Camaros & Firebirds with transverse mufflers. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$99.99

The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$176.99

from

$56.99

Multi-Layered Steel (MLS) exhaust and header collector gaskets are designed for extreme cylinder pressures produced by high horsepower high compression turbo-charged, supercharged and nitrous oxide injected engines. Manufactured from three stainless steel layers, they resist corrosion, will not burn through or push out and maintain maximum fastener torque retention. Stress formed inner and outer layer embossments act like springs that rebound under exhaust flange clamp load, creating force to seal extreme exhaust pressures. Total gasket thickness .075 inch. Will not deteriorate from scrubbing action caused by different expansion rates in aluminum and steel materials.

Product Features:

Multi Layer Stainless Steel 3-Layers
Round Port 1.75″ Diameter
Will not deteriorate from scrubbing action caused by different expansion rates in aluminum and steel materials.
Thickness .072″
Fits GM LS Series Engines 1997-’15

from

$599.99

LS Cast Iron Exhaust Manifold

from

$184.99

The 80 series is a cross-flow design for applications where the muffler is mounted transversely behind the rear end. Delivering an aggressive muscle car sound both inside and outside the vehicle, this is an excellent replacement for Camaros and Firebirds with transverse mufflers. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

from

$479.99

LS Cast Iron Exhaust Manifold

from

$35.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
Slotted bolt holes allow for easier header installation.
Not intended for use in emission controlled vehicles.

Top-Rated Performance and Racing Products Brands For Your 1998 Chevrolet Camaro

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1998 Chevrolet Camaros. Below you’ll find some of our best rated Performance and Racing Products from K&N, Flowmaster Inc., and B & M, and more. Performance and Racing Products from these brands that fit a 1998 Camaro start at just $17.99 and are rated as high as 4.8 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular K&N 1998 Chevrolet Camaro Performance and Racing Products

When it comes to maintaining or upgrading your 1998 Chevrolet Camaro, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. K&N ticks all of those boxes. We offer a wide selection of K&N Performance and Racing Products, specifically designed for the 1998 Chevrolet Camaro. With over 3 K&N brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $17.99, with an average price of just $39.99. Plus, with over 101 customer reviews and an average rating of 4.8 stars, you can trust that our K&N Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $17.99

(50)

Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

“It’s expensive but you can’t beat it plus it has the socket attachment so you can get a nice tight seal in the tight space where the oil filter is loc”

from $83.99

(4)

Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration

“2000 Pontiac Trans Am, 5.7L with automatic transmission, 70,000 miles on the engine. After putting long tube headers and full exhaust on my car, I fin”

from $17.99

(47)

Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

“Good filter that I use regularly”

Popular Flowmaster Inc. 1998 Chevrolet Camaro Performance and Racing Products

Flowmaster Inc. auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1998 Chevrolet Camaro owner should feel confident when installing genuine Flowmaster Inc. parts in their vehicle. To ensure the best fit and performance for your 1998 Camaro, Advance Auto Parts carries a full inventory of 3 Flowmaster Inc. Performance and Racing Products. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Flowmaster Inc. Performance and Racing Products range from $99.99 to $181.99, plus, with more than 5 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

from $181.99

(1)

80 Series Muffler, 3in Offset Inlet 2.5in Dual Offset Outlet, Non-Reversible, Aggressive Sound

“Sounds great, easy install.. Great purchase.”

from $99.99

(3)

40 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound

“Work great on my 1979 corvette”

from $134.99

(1)

Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound

“sounds great just what I WAS LOOKING FOR.”

FAQs for 1998 Chevrolet Camaro Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1998 Chevrolet Camaros?

Out of 125 Performance and Racing Products that fit 1998 Chevrolet Camaros, the following parts are the top sellers:

40 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (16120041) – $99.99
Coil; GM Coil Pack; 2 Tower Style (22360191) – $83.99
Starter Motor Heat Shield (17360071) – $49.99

What’s the price range for 1998 Chevrolet Camaro Performance and Racing Products?

Performance and Racing Product prices for the 1998 Chevrolet Camaro start at $8.99 and go up to $1,870.00 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1998 Chevrolet Camaro?

The average price for Performance and Racing Products for the 1998 Chevrolet Camaro is $303.82. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Chevrolet Camaro model years?

Yes, we currently carry Performance and Racing Products for 49 model years of Chevrolet Camaros between 1967 and 2024. Performance and Racing Products are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Performance and Racing Products for my 1998 Chevrolet Camaro?

The cheapest 1998 Chevrolet Camaro Performance and Racing Products we carry in stock are:

Flat 1 Piece Guide Plate for GM LS with 3/8" Pushrod and 8mm Stud (50288908) – $8.99
Flat 1 Piece Guide Plate for GM LS with 5/16" Pushrod and 8mm Stud (50288903) – $8.99
Tie Rod Dust Boot (17360821) – $9.99
Tie Rod Dust Boot (22906874) – $9.99
7 Degree Steel Retainer for GM GEN III with 26915/26918 Beehive Springs (50289495) – $10.99

What are the top-rated Performance and Racing Products that fit the 1998 Chevrolet Camaro?

Out of 267 reviews by customers, our 1998 Chevrolet Camaro Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1998 Chevrolet Camaro and their top-rated products:

Performance Air Filters
- Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (17400071) – $83.99
Performance Oil Filters
- Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (17400071) – $83.99
Performance Steering Products
- Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (17400071) – $83.99

What types of Performance and Racing Products do you sell for my 1998 Chevrolet Camaro?

As of 11/2/25, these are some of the most in-demand types of Performance and Racing Products for a 1998 Chevrolet Camaro:

Can I get help with 1998 Chevrolet Camaro Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Performance and Racing Products and more.

What is your return policy for Chevrolet Camaro Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Chevrolet Camaro Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1998 Chevrolet Camaro Performance and Racing Products

NOS/Nitrous Oxide Systems – LS1 Injector Plate (Part No.13434NOS)

Motive Gear – Differential Mini Spool (Part No.MS12C)

Mr. Gasket – Bolt Water Pump (Part No.4998)

Flowmaster Inc. – 50 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound (Part No.842453)

Mr. Gasket – Cam Bolt Lock Plate Kit (Part No.948G)

Competition Cams – Thumpr 243/257 Hydraulic Flat Cam K-Kit (Part No.K11-602-4)

Energy Suspension – Hyper-Flex System (Part No.3.18130R)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5203R)

Energy Suspension – Control Arm Bushing Set (Part No.3.3167G)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13102G)

Competition Cams – Magnum 7.800" Long, .080" Wall, 3/8" Diameter Pushrod Set (Part No.7513-16)

Competition Cams – Reduced Travel OE-Style Hydraulic Roller Lifter for ’87+ SBC, LT/LS and V6 (Part No.875-1)

B & M – Automatic Shifter, Quicksilver 4 Speed (Part No.80683)

Mr. Gasket – Starter Motor Heat Shield (Part No.3678)

Energy Suspension – Control Arm Bushing Set (Part No.3.3105G)

MSD Ignition – Mod HEI Dust Cover, V8 & Odd Fire V6 (Part No.8401)

Mallory – Unilite Ignition Module (Part No.605)

Competition Cams – 7 Degree Steel Retainer Set of 16 for GM GEN III w/ 26915/26918 Beehive Springs (Part No.774-16)

Richmond Gear – Differential Ring And Pinion (Part No.69-0378-1)

Competition Cams – Ultra Pro Magnum XD Rockers with 1.7 Ratio for Chevrolet Big Block with 7/16" Stud (Part No.1820-16)

Competition Cams – Thumpr 227/241 Hydraulic Flat Cam (Part No.11-600-4)

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1004)

Flowtech – Standard Header (Part No.11132FLT)

Hooker Headers – Super Competition Header Gasket (Part No.10809HKR)

K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.E-1650)

Edelbrock – Sure Seat Valve Springs for S/B Chevy O.E Cast iron Cylinder Heads (Part No.5703)

Energy Suspension – MotorMt (Part No.3.1151R)

B & M – Torque Converter, Nitrous Holeshot 3600 (Part No.20482)

Competition Cams – VALVE SPRING KIT, FOR LS 1.310" BEEHIVE 1 KT (Part No.26918CS-KIT)

Competition Cams – XFI XE-R 224/230 Hydraulic Roller Cam (Part No.54-444-11)

B & M – Tork Master 2000: Value-Priced Street Performance Torque Converter (Part No.70420)

Mr. Gasket – Ls1 Late Thermostat (Part No.6367)

Competition Cams – GM LS Beehive Valve Spring Kit w/ Chromemoly Steel Retainers; .600" Max Lift (Part No.26915CS-KIT)

Competition Cams – VALVE SPRINGS, 1.310" BEEHIVE 1 ST (Part No.26918-16)

Competition Cams – 7 Degree Steel Retainer Set of 16 for GM GEN III w/ 26915/26918 Beehive Springs (Part No.774-16)

FEL-PRO Performance – Performance Cylinder Head Gasket (Part No.1000)

Competition Cams – XFI RPM 212/218 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV (Part No.K54-412-11)

Competition Cams – GM LS Dual Valve Spring Kit with Titanium Retainers (Part No.26926TI-KIT)

Competition Cams – XFI RPM 216/220 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV (Part No.K54-414-11)

Competition Cams – XFI RPM 206/212 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV (Part No.K54-408-11)

Competition Cams – Endure-X Solid Roller Lifter Set for GM LS GEN III LS1/LS2/LS6/LS7/LSX (Part No.8956-16)

Competition Cams – GM LS Dual Valve Spring Kit with Tool Steel Retainers (Part No.26926TS-KIT)

Competition Cams – ENGINE VALVE LIFTER (Part No.15850-16)

Competition Cams – Mutha’ Thumpr 227/241 Hydraulic Roller Cam for GM LS GEN III/IV (Part No.54-601-11)

Competition Cams – Big Mutha’ Thumpr 235/249 Hydraulic Roller Cam for GM LS GEN III/IV (Part No.54-602-11)

Competition Cams – Thumpr 219/233 Hydraulic Roller Cam for GM LS GEN III/IV (Part No.54-600-11)

Competition Cams – Xtreme Energy 191/201 Hydraulic Roller Cam for GM 3800/3.8L V6 (Part No.76-800-9)

Competition Cams – Xtreme Energy 210/220 Hydraulic Roller Cam for GM 3800/3.8L V6 (Part No.76-802-9)

Competition Cams – ENGINE ROCKER ARM (Part No.19025-16)

Competition Cams – ENGINE ROCKER ARM (Part No.19024-16)

Competition Cams – Pushrod, Spring and Retainer Kit for GM LS (Part No.54100)

B & M – Holeshot 2400 (Part No.70419)

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-1007)

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-1001)

K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.33-2118)

MSD Ignition – Coil; GM Coil Pack; 2 Tower Style (Part No.8224)

Mallory – Unilite Ignition Module (Part No.605)

Mallory – Distributor Wiring Harness (Part No.29349)

MSD Ignition – Trigger Wheel; Flying Magnet; Small Block Chevy (Part No.8611)

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942448)

Flowmaster Inc. – 80 Series Muffler, 3in Offset Inlet 2.5in Dual Offset Outlet, Non-Reversible, Aggressive Sound (Part No.43083)

Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.42443)

Flowmaster Inc. – 80 Series Muffler, 2.5in Offset Inlet 2.5in Dual Offset Outlet, Non-Reversible, Aggressive Sound (Part No.42583)

Mr. Gasket – Mls Exhaust Gasket (Part No.4805G)

Hooker Headers – LS Cast Iron Exhaust Manifold (Part No.8501-3HKR)

Flowmaster Inc. – 80 Series Muffler, 2.5in Offset Inlet 2.5in Dual Offset Outlet, Non-Reversible, Aggressive Sound (Part No.842583)

Hooker Headers – LS Cast Iron Exhaust Manifold (Part No.8501HKR)

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1438)