1998 Chevrolet Camaro Drivetrains
More 1998 Chevrolet Camaro Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1998 Chevrolet Camaro, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1998 Chevrolet Camaro Drivetrains
Yukon Gear – 7.5 GM Cover Gasket (Part No.23018)
National – Bearings (Part No.HM89446)
from
$36.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Wheel Bearing and Seal Kit (Part No.RA-320)
from
$151.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Spindle bearing and seal kit
- Includes all components required to complete the repair
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Dana 25 / 27 / 30 / 36 / 44 / 53 Pinion Nut Washer Replacement (Part No.33163)
from
$3.99
Replacement pinion nut washer for Dana 25, 27, 30, 36, 44 & 53.
Product Features:
See More
Product Features:
- Pinion nut washer for Dana Spicer 25, 27, 30, 44 and 50
Yukon Gear – Spider Gear Set For GM 7.5" & 7.625" Dura Grip Posi, 26 Spline (Part No.16116)
from
$279.99
Yukon spider gear set for GM 7.5″ & 7.625″ Dura Grip posi, 26 spline. This kit does not include clutches. This kit fits Yukon Dura Grip ONLY.
Product Features:
See More
Product Features:
- Spider gear kit
- Fits GM gm 7.5″ with 26 spline Dura Grip positraction
- Includes two side gears, four pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
Yukon Gear – Pinion Nut (Part No.33150)
from
$11.99
Pinion nut for GM 12 bolt car & truck, 55-62 car & truck, 8.2″, 8.2″ Buick/Olds/Pontiac & 63-79 Corvette. 1 1/8″ socket, 7/8″ x 16 thread.
Product Features:
See More
Product Features:
- Pinion nut for GM 12 bolt car and truck, 8.2″, 8.2″ Buick, Oldsmobile and Pontiac and 1963-1979 Corvette
- 7/8″ x 16 thread
- 1 1/8″ socket
Driveworks – Taper Bearing Cup (Part No.S-LM-501314)
from
$7.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Yukon Gear – Chrome Moly Cross Pin Shaft For Mini-Spool For GM 12 Bolt Car And Truck (Part No.32236)
from
$51.99
Chrome Moly cross pin shaft for Mini-Spool for GM 12P and 12T HD.
Product Features:
See More
Product Features:
- Hardened cross pin shaft
- Fits GM 12 bolt passenger car and truck
Yukon Gear – R1563Tav Rear Axle Bearing And Seal Kit (Part No.10004)
from
$42.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1563TAV axle bearing and seal kit, TorringtonBrand, 2.250″ OD, 1.400″ ID. This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Includes axle bearing and seal
- Services one side
- Torrington Brand
- 2.250″ O.D.
- 1.400″ I.D.
Driveworks – Tapered Roller Bearing (Part No.S-A-9)
National – Shaft Repair Sleeve (Part No.99139)
from
$39.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Yukon Gear – Differential Cover B (Part No.33572)
from
$7.99
Differential Cover B
Yukon Gear – Replacement Carrier Shim Kit For Dana Spicer 44, 30 Spline Axles (Part No.55010)
Yukon Gear – 7.5 & 7.625 Standard Open Pinion Gear Thrust Washer (Part No.33390)
from
$8.99
7.5 & 7.625 Standard Open Pinion gear Thrust Washer.
Product Features:
See More
Product Features:
- Pinion gear thrust washer for GM 7.5″ and 7.625″
- Fits standard open differentials only
USA Standard Gear – Ring & Pinion Gear Set For GM 7.5" In A 3.42 Ratio (Part No.36195)
from
$334.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.
Product Features:
See More
Product Features:
- Fits GM 7.5″ and 7.6″
- 7.50″ ring gear diameter
- 27 spline pinion
- 10 ring gear bolts
- 3.42 ratio
Yukon Gear – Bearing Race Driver (Part No.56016)
from
$188.99
Bearing race driver. No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits HM89210 race
- All steel construction
National – Shaft Repair Sleeve (Part No.99170)
from
$41.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Yukon Gear – Positraction Internals For GM 12 Bolt Car And Truck With 30 Spline Axles (Part No.16039)
from
$425.99
Yukon positraction internals (0.806″ diameter) for GM 12P and 12T with 30 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit does not include clutches. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fit GM 12 bolt passenger car and truck Dura Grip positraction with 30 spline axles
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
Yukon Gear – U/Joint Strap Bolt For 14T, 7.5", And 8.5" GM (Part No.33351)
from
$8.49
U/joint strap bolt for 14T, 7.5″, and 8.5″ GM.
Product Features:
See More
Product Features:
- u-joint strap bolt for GM 10.5″ 14 bolt truck, 7.5″ and 8.5″
Driveworks – Taper Bearing Cup (Part No.S-M-88010)
from
$5.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Yukon Gear – Dura Grip Positraction For GM 12 Bolt Car With 30 Spline Axles, 4.10 & Up (Part No.26013)
from
$823.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.
Product Features:
See More
Product Features:
- Fits GM 12 bolt passenger car with 30 spline axles
- 4.10 and up ratio only
- 4-spring, clutch style positraction
- Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
- Fully rebuildable
- Assembled in the USA
- 30 spline
National – Bearings (Part No.32207)
from
$34.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Matched cup and cone components ensures consistent quality and outstanding performance
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Replacement Ring Gear Bolt For Model 35, Dana 25, 27, 30 & 44 – 3/8" X 24 (Part No.33038)
from
$11.99
Replacement ring gear bolt for Model 35, Dana 25, 27, 30 & 44. 3/8″ x 24.
Product Features:
See More
Product Features:
- Ring gear bolt for Dana Spicer 25, 27, 30, 44 and AMC Model 35
- 3/8″ x 24 thread
Powertrax – No-Slip Traction System (Part No.9207752605)
from
$518.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles. Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction. Powertrax® = Extreme Traction Systems!
See More
Yukon Gear – 1310, U/Jnt Straps & Bolts, 8.5" Front, 12P & 12T GM (Part No.41196)
from
$61.99
1310, U/Jnt straps & bolts, 8.5″ front, 12P & 12T GM.
Product Features:
See More
Product Features:
- u-joint strap kit
- Fits GM 12 bolt passenger car and truck and 8.5″ front
- 1310 u-joint size
- Includes two straps and four bolts
Pro-King – Crush Sleeve (Part No.721A034)
from
$2.89
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)
from
$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.
Product Features:
See More
Product Features:
- Includes three quarts of Redline Shockproof oil
Idemitsu – Type HP Automatic Transmission Fluid – 1 qt (Part No.30040099-75000C)
from
$13.79
Formulated to meet the specific requirements of Subaru vehicles equipped with conventional (non-CVT) transmissions up to model year 2005. Recommended for service-fill in all Subaru automatic transmissions where SUBARU ATF HP is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.
Product Features:
See More
Product Features:
- Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
- Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
- Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
- Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
- Advanced anti-wear technology provides maximum protection to gears and bearings
Popular 1998 Chevrolet Camaro Drivetrains Categories
1998 Chevrolet Camaro Drivetrains
You count on your 1998 Chevrolet Camaro to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 214 Drivetrains ranging in price from $1.99 to $1,839.99, you’re sure to find everything you need for your 1998 Chevrolet Camaro.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 22 different brands like Moog, DriveWorks, and National. 1998 Chevrolet Camaro Drivetrains start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 1,779 extensive product reviews on 1998 Chevrolet Camaro Drivetrains. Some of the top-rated Drivetrains products we carry are Oil Seal with 4.8 stars and Rear Differential Cover with 4.5 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1998 Chevrolet Camaro below to get started!
Top-Rated Drivetrains Brands For Your 1998 Chevrolet Camaro
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1998 Chevrolet Camaro running right for years to come. In our inventory you’ll find brands like Moog, DriveWorks, National, and even more.
Popular Felpro Drivetrains
You’ll find popular Felpro brand products across Differentials. All are waiting to get your 1998 Chevrolet Camaro back on the road. Some of the top-rated Felpro products in these categories are:
Top-Rated MOOG Driveline Products Drivetrains
If MOOG Driveline Products are what you’re looking for, our inventory holds plenty. We stock MOOG Driveline Products brand Drivetrains for your 1998 Chevrolet Camaro, and some of our most reviewed MOOG Driveline Products parts include:
FAQs for 1998 Chevrolet Camaro Drivetrains
What are the most purchased Drivetrains for the 1998 Chevrolet Camaro?
Out of 214 Drivetrains for the 1998 Chevrolet Camaro, the most popular in our inventory are:
What are the top-rated 1998 Chevrolet Camaro Drivetrains?
Top-rated Drivetrains for your 1998 Chevrolet Camaro based on customer reviews/ratings are:
from
$20.99
(38)
Rear Differential Cover
“Looks great, face lift for the rear differential. Old one was rusted & in bad shape. Just remember to get the correct size.”
