1998 Chevrolet C1500 Performance and Racing Products

Name: Distributor; Chevy V8 with Internal Module
Brand: MSD Ignition
SKU: 8360
Price: 511.99 USD
Rating: 1.0 (1 reviews)

Below you will find various in-demand Chevrolet Performance and Racing Products, components and accessories for your 1998 C1500. Advance Auto Parts has popular C1500 parts like Performance Engines, Performance Ignition Products, Performance Distributors and more. You’ll also find aftermarket and OEM Performance and Racing Products for other C1500 model years including 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1999 and more. Select a category of 1998 Chevrolet C1500 Performance and Racing Products below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1998 Chevrolet C1500 Performance and Racing Products Categories

Performance Intake Manifolds

Performance Coils

Performance Air Intake Kits

Performance Exhaust Mufflers

Performance Distributor Cap and Rotor Kits

Performance Exhaust Headers

Engine Cold Air Intakes

Performance Shifters

Performance Distributors

Performance Valve Covers

Performance Body Mounts

Performance Engine and Transmission Mounts

Performance Radiator Caps

Performance Engine Cylinder Head Gaskets

Performance Distributor Rotors

Performance Distributor Components

Performance Engine Intake Manifold Gaskets

Performance Coil Spring Insulators

Performance Engine Timing Sets and Components

Performance Engine Valve Springs

Performance Engine Valve Cover Gasket Sets

Performance Spark Plug Wires

Performance Flywheel and Flexplates

Performance Exhaust Manifold Gaskets

Performance Posi Units and Components

Performance Exhaust Tail Pipes

Performance Leaf Spring Bushings

Performance Chassis Bump Stops

Performance Distributor Caps

Performance Engine Rocker Arms

Performance Engine Camshafts

Performance Ring and Pinions

Performance Ignition Parts

Performance Lower Control Arm Bushings

Performance Engine Valve Lifters

Performance Sway Bar Bushings

Performance Tie Rod End Boots

Performance Transmission Shift Kits

Performance Shock Mount Kits

Performance Ball Joint Boots

Performance Brake Hose Kits

Performance Torque Converters

Performance Nitrous Systems

Essential Performance and Racing Products for 1998 Chevrolet C1500s

from

$511.99

The Pro-Billet Ready-to-Run distributor is the perfect upgrade for outdated points distributors or bulky HEI. Simply install the distributor in the engine, connect three wires, the coil and fire it up! A maintenance-free magnetic pick-up accurately triggers the module. The increased output of the amplifier easily outperforms stock ignitions and will smooth out the engine’s idle, improve starting and provide a much higher RPM range. The Ready-to-Run features MSD’s adjustable mechanical advance which allows you to custom tailor an ignition curve to match your engine’s needs. There is also a vacuum advance canister to help improve economy. For positive street performance, the Ready-to-Run is the best choice.

Product Features:

Simple and clean three wire installation
Supplied w/An HEI Style Distributor Cap And Rotor
Accepts Cap-A-Dapts
Does not require an MSD Ignition Control
CARB E.O. Approved
Now includes built-in Rev Limiter
O-ring seals can be installed for oil press. control (Mods only)
Special oil tract improves lubrication to the dist./cam gear

from

$511.99

The Hurst truck Pro-Matic 2 ratchet action shifter is ideal for street or strip performance. It features a lighted gear indicator, NHRA approved reverse lockout, chrome stick and a black knob.

Product Features:

Extended Shifter Stick
Forward and Reverse Ratchet Action
Cable Operated
Illuminated Gear Indicator
Neutral Safety and Back Up Light Switch

from

$587.99

Hays aluminum flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. Features replaceable steel surface insert. Precision balanced to either neutral (internal) or Detroit (external) specifications. Meets SFI specification 1.1 for racing.

Product Features:

Certified Billet Material
Borg and Beck Clutch Pattern
Long-Style Clutch Pattern
Ring Gear Securely Mounted To Prevent Spinning

from

$266.99

Product Features:

Non-Rotator
1.500 in. Outside Diameter
1.082 in. Inside Diameter
1.340 in. Coil Blind
Set of 16

from

$13.99

High Energy Hydraulic Flat Lifter Chevrolet SBC, BBC, and 194-292/200-262 V6.

from

$54.99

The cap of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap. To make things easy, we now offer these caps as replacement kits.

Product Features:

Stock GM HEI replacement distributor cap
Red

from

$53.99

Knowing your coolant temperature can help to prevent burn injuries. Thermocap Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermocap Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree F temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges.

Product Features:

Indicates Coolant Temperature
Helps to Prevent Injuries from coolant or steam burns
Integrated Coolant Reclamation Valve
Improves Underhood Appearance
Fahrenheit and centigrade readings
Various valve pressures available

from

$89.99

Product Features:

Large internal flow tubes improve exhaust flow and reduce backpressure
Exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications.
Dyno proven to flow up to 700 SCFM
Dyno proven to flow up to 700 SCFM

from

$351.99

RngPnn

from

$35.49

Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.

Product Features:

Withstands Intense Exhaust Heat
Graphite-Impregnated Facing
Steel Expanded Metal Core
Superior Tensile Strength
Resists Deteriorating
Anti-stick Properties
Easy Removal For Disassembly

from

$66.99

A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.

Product Features:

Gains Both Performance and Longevity
Will Handle Any and All Torque
Out Lasts Rubber

from

$53.99

Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

IMPROVED FLOW CAPACITY : Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
DESIGNED TO PERFORM : Fixture checked to ensure a precise fit for quick and easy installation
AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS: Made from aluminized steel for durability and long life
BETTER TOGETHER : Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade

from

$32.99

ACCEL Hi-Performance rotors offer superior protection from arc-thru and crossfire. Features hi-performance 60,000 volt alkyd compound, stress-relieved at molding to ensure stability and resist centrifugal forces at high racing RPMs.

Product Features:

Max stability for all RPM ranges
Heavy duty for maximum energy transfer
Fits Most Stock And Modified Distributors
Polyester Glass Filled For Durability

from

$121.99

Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:

Assures Longer Lasting Cab to Bed Alignment
Replace to Restore Ride Height
Gain Durability
Stronger Than Original Rubber Mounts

from

$91.99

Made of superior Hyper-Flex material. Saves replacing again and again, lasting 3 to 10 times longer. Assemble to chassis the same way as OEM isolators and do not adversely change ride characteristics.

Product Features:

Made of Superior Hyper-Flex+ Material
Lasts from 3 to 10 Times Longer
Assemble to Chassis Same Way as OEM
Maintains Factory Ride Characteristics
Simple Way to Increase Vehicle Height

from

$94.99

For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$42.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$67.99

The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.

Product Features:

Helically wound conductor suppresses electro and radio noise
Kevlar core combination for great strength and durability
Heavy Duty Terminals For Secure Connection
8mm silicone and synthetic jacket resists heat and abrasion
500 Ohms/ft. Resistance For Improved Spark Delivery And Power
Silicone Boots Protect Against High Exhaust Temps

from

$12.29

Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Hyper-Flex performance polyurethane bump stops for control arms, traction bars, leaf springs, etc. are guaranteed to last longer and operate more efficiently than original rubber stops. The smaller, general purpose bullet shaped snubber is ideal for control arms. the low profile button head is for use when clearance is limited. Our large competition race style bump stops smooth out compression better and have a large reinforced metal plate welded to the mounting plate and molded-in. Each style is specially designed for a perfect and custom fit and each style has it’s own durometer, hardness, characteristics. Energy’s wide selection of bump stops are available in red or black color.

Product Features:

Made of Superior Hyper-Flex+ Material
Helps Prevent Damage to Control Arm

from

$34.49

Product Features:

Service Part
Makes Connections Quick And Easy

from

$75.99

These are high quality nuts with allen set screws to provide you with that positive lock needed for Race or original equipment Rocker Arms.

Product Features:

They Are Zinc Dichromate Plated Steel
They Have Black Oxide Coated Set Screws
Keeps Rocker Arms Positively Locked
(16) Rocker Arm Nuts w/ Locks 3/8″-24 Threads
Includes Locks and Hex Wrench
Shank O.D. .603″

from

$82.99

The Edelbrock #4480 Signature Series Valve Covers are designed for Chevrolet 396-502 V8 ’65 & later applications. Engineered for function and styled for great looks, Signature Series valve covers have stock-style breather baffles that prevent oil passage to the PCV valve. These quality valve covers accept all emissions equipment, including PCV valve holes. Rubber grommets for the breather and PCV valve holes are included. Matching breathers sold separately.

Product Features:

Big Block Chevy 396-502 1965 & Up
Short
Chrome Steel
Set Of Two
Rubber Grommets For Breather

from

$195.99

Distributor Cap And Rotor Kit

from

$5.99

Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$367.99

The K&N AirCharger 63-1007-1 air intake system replaces your vehicle’s restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your vehicle’s engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 63-1007-1 air intake places a round K&N high-flow air filter directly on top of the throttle body allowing large volumes of air to be pulled into the engine delivering a guaranteed gain in horse power. The oversized air filter is capped with an impressive chrome lid for added visual appeal under the hood. This air intake is relatively easy to install using commonly available tools. Not legal for sale or use in California on any pollution controlled motor vehicle.

Product Features:

Guaranteed horsepower gain
Designed to improve throttle response and engine sound
Free-flowing high density polyethylene tube
Replaces entire factory air intake system
K&N No-Hassle Lifetime Limited Warranty
Easy to install, usually in 60 minutes or less
DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
HIGH QUALITY: Made in America.

from

$68.99

Russell’s wide variety of lightweight aluminum adapter fittings allow for the connection of Russell hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel f

from

$12.79

Adds performance to any shock. Benefit from better durability over O.E.M. rubber bushings. Important to use for competition of any kind. Great for show vehicles – adds that finishing touch. Made of Energy’s Hyper-Flex performance polyurethane.

Product Features:

Made from HYPER-Flex Polyurethane
Gives Shock Maximum Efficiency
Add to the Performance of Every Shock
Gives Instant Response/Control to Suspension

from

$12.79

Made from HYPER-Flex Polyurethane
Gives Shock Maximum Efficiency
Add to the Performance of Every Shock
Gives Instant Response/Control to Suspension

Upgrade your 1998 Chevrolet C1500 with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1998 Chevrolet C1500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Performance and Racing Products are key to keeping your C1500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 112 Performance and Racing Products for the 1998 Chevrolet C1500, designed to meet your needs without breaking the bank. From Performance Engine replacements to Performance Ignition Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1998 Chevrolet C1500 at great prices. Our Performance and Racing Products inventory for this model ranges from just $5.99 to $1,076.99, with an average price of $222.53. Our 112 Performance and Racing Products in stock come from 19 trusted brands, so you’re sure to find the right part for your 1998 Chevrolet C1500 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1998 Chevrolet C1500, we stock popular OEM and aftermarket Performance and Racing Products from top names like FEL-PRO Performance, MSD Ignition, B & M, and more. FEL-PRO Performance Performance and Racing Products start at just $31.49 and boast an impressive 4.2 stars average rating from customers. MSD Ignition and B & M also bring quality to the table, with Performance and Racing Products available starting at $79.99, and at an average 4.2 stars rating. With 543 customer reviews and counting, our 1998 Chevrolet C1500 Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1998 Chevrolet C1500 is always ready to roll. We’re committed to providing you with everything you need to keep your C1500 in top shape, all in one place. Start shopping confidently below for your 1998 Chevrolet C1500!

Best-Selling Performance Engines for 1998 Chevrolet C1500s

Enhance the driving experience in your Chevrolet with 34 quality Performance Engine components, starting at $8.99.

show more show less

from

$42.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$44.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
Raises combustion sealing force to roughly three times that of standard head gaskets.
Steel wire rings for the greatest combustion seal strength.
Not intended for use in emission controlled vehicles.

from

$31.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
Not intended for use in emission controlled vehicles.

from

$47.99

Product Features:

Clean Positive Seal
Embossed Silicone Bead Surrounding The Port
Matched To Manifolds And Cylinder Heads

from

$23.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Die cut silicone rubber gaskets conform to out-of-flat covers
Great for on-again/off-again situations
Not intended for use in emission controlled vehicles.

from

$18.29

These grade 5 socket head bolts are zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8-16 x 1 inch bolts & washers.

Product Features:

Grade 5 socket head bolts are zinc plated for protection and appearance
Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds
Washers Included

from

$459.99

Similar in performance to the Holeshot series, the Tork Master is B&M’s lowest cost torque converter. The Tork Master is an excellent all-around performance street converter. The best ‘value priced’ street converters available.

Product Features:

New Precision Pump Drive Tube
Pressure Tested
Fully Balanced
Needle Thrust Bearing
New Thrust Washer

from

$51.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$51.99

Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. This is a low density material that conforms well to irregular surfaces and has very good crush resistance at high flange pressures. They provide excellent sealing and durability as the material is designed for sealing gasoline, oils, water and coolant in applications up to 350 degrees Fahrenheit. While die-cut for an excellent fit, they can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track.

Product Features:

Manufactured from cellulose/nitrile composition gasket material
Provides excellent sealing and durability
Die-cut for an excellent fit
Can be trimmed if necessary for modified port applications
For OE replacement, high performance street, drag race and oval track use

from

$921.99

The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, New turbine hub and dual pattern drive lugs on some GM Holeshots.

Product Features:

Furnace Brazed Impeller
Steel Alloy Pump Drive Tube
Heavy Duty Needle Bearing
Between Stator and Turbine
Furnace Brazed Turbine

Magnum Computer Controlled 215/220 Hydraulic Roller Cam Chevrolet 262/4.3L V6

from

$815.99

Magnum Computer Controlled 215/220 Hydraulic Roller Cam Chevrolet 262/4.3L V6

Magnum 206/206 Hydraulic Roller Cam for Chevrolet 262/4.3L V6

from

$815.99

Magnum 206/206 Hydraulic Roller Cam for Chevrolet 262/4.3L V6

Magnum Computer Controlled 210/215 Hydraulic Roller Cam Chevrolet 262/4.3L V6

from

$815.99

Magnum Computer Controlled 210/215 Hydraulic Roller Cam Chevrolet 262/4.3L V6

Magnum 224/224 Hydraulic Roller Cam for Chevrolet 262/4.3L V6

from

$815.99

Magnum 224/224 Hydraulic Roller Cam for Chevrolet 262/4.3L V6

Magnum 215/220 Hydraulic Roller Cam For Chevrolet 262/4.3L

from

$611.99

Magnum 215/220 Hydraulic Roller Cam For Chevrolet 262/4.3L

Magnum Computer Controlled 210/215 Hydraulic Roller Cam For Chevrolet 262/4.3L

from

$611.99

Magnum Computer Controlled 210/215 Hydraulic Roller Cam For Chevrolet 262/4.3L

Magnum 224/224 Hydraulic Roller Cam For Chevrolet 262/4.3L

from

$611.99

Magnum 224/224 Hydraulic Roller Cam For Chevrolet 262/4.3L

from

$483.99

Torque Converter – Tork Master 2400 for GM 1993 to 1996 TH700R4 (30 spline) 1984 to 1993 and 4L60E (30 spline) APPLICATION: Tork Master 2400 for GM 1993 to 1996 TH700R4 (30 spline) 1984 to 1993 and 4L60E (30 spline) The Tork Master is B&M’s lowest cost pe

Product Features:

New Precision Pump Drive Tube
Pressure Tested
Fully Balanced
Needle Thrust Bearing
New Thrust Washer

from

$401.99

16 Springs

from

$399.99

ENGINE ROCKER ARM

from

$336.99

16 Springs

Magnum Double Row Timing Set for OE Roller Chevrolet V6 and 305-350 Small Block

from

$119.99

Magnum Double Row Timing Set for OE Roller Chevrolet V6 and 305-350 Small Block

from

$103.99

Engine Valve Spring Kit

from

$74.99

Engine Valve Spring Kit

Most Popular 1998 Chevrolet C1500 Performance Ignition Products

Customize your Chevrolet with 7 Performance Ignition Products products like Performance Coils, Performance Spark Plug Wires, and Performance Ignition Parts, all priced under $219.99.

show more show less

from

$219.99

The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:

Bolt-on Performance
Custom Fit For Make And Model Listed
Wires Are Pre-Cut To Exact Specifications
Conductor core features DuPont Kevlar material for increased tensile strength
Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately

from

$95.99

Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:

Service Part
No Moving Parts To Wear Out
Self Contained Unit
Can Drive OEM
Can Drive High Performance Ignition Coils

from

$79.99

Top off your GM ignition system with these great new replacement coils. The GM coils have MSD performance in factory style housings. MSD designed these coils by combining our blaster coil experience with e-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The coils will work with stock ignition systems as well as MSD equipped cars and trucks. Installation tip: If you plan to install an MSD ignition with your GM dual connector coil, use PN 8876 harness for a direct plug-in installation.

Product Features:

Direct performance replacement for GM dual connector coil
100:1 Turns Ratio
Lower Primary Resistance Produces High Voltage Output
Works w/Stock Ignition As Well As MSD Ignitions

from

$73.99

These new coils mount directly in place of the factory coils and accept the factory connectors. Spark energy is increased thanks to improved materials and windings that were spec’d by MSD engineering.

Product Features:

Replacement Coil For GM Dual Connector Coil
Improved Turns Ratio
Lower Primary Resistance
Bolt-In replacement coil
Produce More Output Voltage
Smooth Idle

from

$85.99

When it comes to late model performance parts, nothing beats bolt-on and direct connection components. These new bolt-in coils are designed with improved materials and windings to produce a stronger output. GM single connector coil PN 8231. Used on 1996 to 1999 General Motors vehicles. Installation tip: if you plan to install an MSD Ignition with this coil, use a PN 8877 harness for a direct plug-in installation.

Product Features:

Direct performance replacement coil for GM 1996-1999
80:1 turns ratio
Lower Primary Resistance Produces High Voltage Output
Works w/Stock Ignition As Well As MSD Ignitions

from

$34.49

Product Features:

Service Part
Makes Connections Quick And Easy

from

$204.99

Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:

Glass Filled Polyester Case
Longer Spark Duration
Increased Performance
No Energy Loss Due To Arcing
Includes Brass Contact Terminal

Top Picks for 1998 Chevrolet C1500 Performance Distributors

Upgrade Chevrolet C1500s with top-quality Performance Distributors parts, including 5 OEM and aftermarket selections for your 1998 model.

show more show less

from

$614.99

Starting on the inside, a 0.500 In. oversized steel shaft spins in a sealed ball bearing and sintered bushing for long endurance and accurate spark delivery throughout the entire RPM range. Mounted on top of the shaft is an easy-to-adjust chromoly mechanical advance assembly. Different advance springs and stop bushings are supplied so you can choose from 24 curves. A maintenance-free magnetic pick-up provides accurate trigger signals to your MSD Ignition control. A precision-manufactured reluctor that is connected to the shaft is responsible for triggering the pick-up. The distributor is topped off with a high quality black cap and race rotor.

Product Features:

CNC machined billet aluminum housing and billet aluminum base
Will not accept a vacuum advance canister
Must Be Used w/An MSD Ignition Control
O-ring seals can be installed for oil press. control (Mods only)
Supplied w/Socket Style Distributor Cap And Rotor
Special oil tract improves lubrication to the dist./cam gear
Nylon pads ensure smooth operation of the advance weights
Advance weight pins are staked and tig welded to the plate

from

$32.99

Max stability for all RPM ranges
Heavy duty for maximum energy transfer
Fits Most Stock And Modified Distributors
Polyester Glass Filled For Durability

from

$84.99

ACCEL Heavy-Duty Caps offer superior protection from arc-thru and crossfire. Features hi-performance 60,000 volt alkyd compound, stress-relieved at molding to ensure stability.

Product Features:

Fits Most Stock And Modified Distributors
Brass inserts provide for high spark energy flow
Polyester Glass Filled For Durability
Heavy duty for maximum energy transfer

from

$263.99

Everything you need to Super Tune Up your truck, van, or Jeep engine! The kits includes a high performance cap and rotor. A set of 8mm Extreme 9000 Spiral Core wires. This kit also includes the ACCEL classic copper core spark plugs to fire your engine up.

Product Features:

Complete Super Tune Kit
8mm Spiral Core Wires
Accel Classic Core Plugs
High Performance Cap And Rotor
Reduced Emissions

from

$60.99

This gear test fixture features variable rpm and oil pressure control allowing MSD engineers the ability to maintain the exact conditions that they want for gear tests. Severe loads can be placed on the gear and the fixture can spin up to 10,000 rpm. Features increased outer hardened layer thickness (RC 55-60). Micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.

Product Features:

Increased outer hardened layer thickness (RC 55-60)
Micro Polished Surface For Smooth Contact
Proprietary formulated ductile iron.
Melonite QPQ coated reduces friction and initial wear
Interstitial carbide improves wear resistance/running properties

In-Demand Performance Steering Products for 1998 Chevrolet C1500s

Select from 6 premium Performance Steering Products parts for your 1998 Chevrolet C1500, with prices ranging from $5.99 to $121.99.

show more show less

from

$5.99

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$121.99

Assures Longer Lasting Cab to Bed Alignment
Replace to Restore Ride Height
Gain Durability
Stronger Than Original Rubber Mounts

from

$5.99

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$54.99

Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$6.29

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$121.99

Assures Longer Lasting Cab to Bed Alignment
Replace to Restore Ride Height
Gain Durability
Stronger Than Original Rubber Mounts

Most Sold 1998 Chevrolet C1500 Performance Exhaust Products

Explore our best-selling Chevrolet parts for the 1998 C1500 among 10 OEM and aftermarket options starting from $28.99.

show more show less

from

$31.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
Slotted bolt holes allow for easier header installation.
Not intended for use in emission controlled vehicles.

from

$204.99

The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$357.99

Product Features:

Bolt On Quickly And Easily
Top Performance/Clean Machine
Increased Efficiency
Leak Free Seal
Connects To Exhaust Head Pipe
Complete With Premium Gaskets
16-Gauge Tubing For Durability

from

$50.99

Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

IMPROVED FLOW CAPACITY : Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
DESIGNED TO PERFORM : Fixture checked to ensure a precise fit for quick and easy installation
AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS: Made from aluminized steel for durability and long life
BETTER TOGETHER : Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade

from

$152.99

The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$28.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
Slotted bolt holes allow for easier header installation.
Not intended for use in emission controlled vehicles.

from

$204.99

from

$224.99

The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

Product Features:

Mild to stock exterior exhaust tone
Minimal interior resonance
Excellent choice for large displacement vehicles
Improved horsepower, torque and potential mileage improvement

from

$53.99

Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

IMPROVED FLOW CAPACITY : Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
DESIGNED TO PERFORM : Fixture checked to ensure a precise fit for quick and easy installation
AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS: Made from aluminized steel for durability and long life
BETTER TOGETHER : Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade

from

$169.99

The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

Product Features:

Durable fully welded 409 stainless steel
Deep aggressive exhaust note
Noticeable interior resonance
Excellent performance on high horsepower vehicles
No internal packing to blowout

Top-Rated Performance and Racing Products Brands For Your 1998 Chevrolet C1500

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1998 Chevrolet C1500s. Below you’ll find some of our best rated Performance and Racing Products from FEL-PRO Performance, MSD Ignition, and B & M, and more. Performance and Racing Products from these brands that fit a 1998 C1500 start at just $31.49 and are rated as high as 4.2 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular FEL-PRO Performance 1998 Chevrolet C1500 Performance and Racing Products

When it comes to maintaining or upgrading your 1998 Chevrolet C1500, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. FEL-PRO Performance ticks all of those boxes. We offer a wide selection of FEL-PRO Performance Performance and Racing Products, specifically designed for the 1998 Chevrolet C1500. With over 3 FEL-PRO Performance brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $31.49, with an average price of just $39.66. Plus, with over 4 customer reviews and an average rating of 4.2 stars, you can trust that our FEL-PRO Performance Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $31.49

(2)

Exhaust Manifold Gasket Set

“Appear to be A-OK on my Chevrolet as far as fitment”

from $44.99

(1)

Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

“Racing application”

from $42.49

(1)

Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

“Real good products”

Popular MSD Ignition 1998 Chevrolet C1500 Performance and Racing Products

MSD Ignition auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1998 Chevrolet C1500 owner should feel confident when installing genuine MSD Ignition parts in their vehicle. To ensure the best fit and performance for your 1998 C1500, Advance Auto Parts carries a full inventory of 3 MSD Ignition Performance and Racing Products. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these MSD Ignition Performance and Racing Products range from $79.99 to $614.99, plus, with more than 8 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

from $219.99

(2)

Wire Set; Super Conductor; Chevy Tahoe; Sub. Vortec V8; 96-97

“the price was good”

from $614.99

(3)

Distributor; Billet; Chevy V6 Even-Fire

“Excelente calidad”

from $79.99

(3)

Coil; GM External HEI Coil; High Performance

“This product is great, I also installed the msd cap and rotor and an msd ingnition 6a These products togeather create performace and a little more pow”

FAQs for 1998 Chevrolet C1500 Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1998 Chevrolet C1500s?

Out of 112 Performance and Racing Products that fit 1998 Chevrolet C1500s, the following parts are the top sellers:

High Performance Transmission Mount for Street & Racing Vehicles (16360003) – $46.49
Intake Manifold Bolts (6120970) – $18.29
Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (5189543) – $42.49

What’s the price range for 1998 Chevrolet C1500 Performance and Racing Products?

Performance and Racing Product prices for the 1998 Chevrolet C1500 start at $5.99 and go up to $1,076.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1998 Chevrolet C1500?

The average price for Performance and Racing Products for the 1998 Chevrolet C1500 is $222.53. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Chevrolet C1500 model years?

Yes, we currently carry Performance and Racing Products for 10 model years of Chevrolet C1500s between 1988 and 1999. Performance and Racing Products are bought most frequently for the following model years: 1999, 1997, 1996, 1995, 1994, 1993, 1992, 1991, and 1990.

What are the cheapest Performance and Racing Products for my 1998 Chevrolet C1500?

The cheapest 1998 Chevrolet C1500 Performance and Racing Products we carry in stock are:

Tie Rod Dust Boot (17360821) – $5.99
Tie Rod Dust Boot (17360833) – $5.99
Tie Rod Dust Boot (22906873) – $6.29
Camshaft Bolt for Chevrolet V8 and V6 (50288779) – $8.99
Shock Bushing Set (22906613) – $9.99

What are the top-rated Performance and Racing Products that fit the 1998 Chevrolet C1500?

Out of 543 reviews by customers, our 1998 Chevrolet C1500 Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1998 Chevrolet C1500 and their top-rated products:

Performance Radiators
- Thermocap Radiator Cap (6900022) – $53.99
Performance Air Intake Kits
- Thermocap Radiator Cap (6900022) – $53.99

What types of Performance and Racing Products do you sell for my 1998 Chevrolet C1500?

As of 3/1/26, these are some of the most in-demand types of Performance and Racing Products for a 1998 Chevrolet C1500:

Can I get help with 1998 Chevrolet C1500 Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Performance and Racing Products and more.

What is your return policy for Chevrolet C1500 Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Chevrolet C1500 Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1998 Chevrolet C1500 Performance and Racing Products

MSD Ignition – Distributor; Chevy V8 with Internal Module (Part No.8360)

Hurst – Automatic Shifter, Pro-Matic 2 Truck (Part No.3838510)

Hays – Power Train (Part No.10-235)

Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 396-402-427-454 V8 (Part No.5895)

Competition Cams – High Energy Hydraulic Flat Lifter Chevrolet SBC, BBC, and 194-292/200-262 V6. (Part No.812-1)

MSD Ignition – Distributor Cap; GM HEI; Red (Part No.8411)

Mr. Gasket – Thermocap Radiator Cap (Part No.2471S)

Dynomax – Super Turbo Exhaust Muffler: Universal Fit, Aluminized Steel, 13" L, 3" In, 2.5" Out, Oval (Part No.17674)

Richmond Gear – RngPnn (Part No.69-0169-1)

Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5901)

Energy Suspension – Motor Mount (Part No.3.1145R)

Dynomax – Exhaust Tail Pipe (Part No.54021)

Accel – High-Performance Distributor Rotor for GM 4.3L-7.4L Engines (Part No.130141)

Energy Suspension – Chevy Pickup Body Mount Set for Improved Ride and Durability (Part No.3.4123R)

Energy Suspension – Coil Spring Isolator Set (Part No.3.6115R)

Energy Suspension – Control Arm Bushing Set (Part No.3.3147R)

FEL-PRO Performance – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.1003)

MSD Ignition – Wire Set; Street Fire; Chevy Truck 305-350; 85-on (Part No.5562)

Energy Suspension – Control Arm Bump Stop Set (Part No.3.9102G)

Mallory – Distributor Wiring Harness (Part No.29349)

Mr. Gasket – Ultra Seal: Sure-Lock Rocker Arm Nuts (Part No.920G)

Edelbrock – Signature Series Valve Covers: Big Block Chevy 396-502 1965 & Up, Chrome Steel (Part No.4480)

Accel – Distributor Cap And Rotor Kit (Part No.8200)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101G)

K&N – Cold Air Intake: Adds Up To 7 Horsepower, With Washable Air Filter (Part No.63-1007-1)

Russell – Street Legal, C1500/C2500 P/U 2WD (Part No.672340)

Energy Suspension – Shock Bushing Set (Part No.9.8138R)

Energy Suspension – Shock Bushing Set (Part No.9.8138G)

FEL-PRO Performance – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.1003)

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1004)

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1603)

Edelbrock – Intake Manifold Gasket for E-Tec 170 Small-Block Chevy (Part No.7235)

FEL-PRO Performance – PERFORMANCE VALVE COVER GASKET SET (Part No.1602)

Mr. Gasket – Intake Manifold Bolts (Part No.955G)

B & M – Tork Master 2000: Value-Priced Street Performance Torque Converter (Part No.70420)

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1010)

Mr. Gasket – Intake Gasket (Part No.136G)

B & M – Torque Converter, Holeshot 3000 (Part No.70421)

Competition Cams – Magnum Computer Controlled 215/220 Hydraulic Roller Cam Chevrolet 262/4.3L V6 (Part No.56-460-8)

Competition Cams – Magnum 206/206 Hydraulic Roller Cam for Chevrolet 262/4.3L V6 (Part No.56-410-8)

Competition Cams – Magnum Computer Controlled 210/215 Hydraulic Roller Cam Chevrolet 262/4.3L V6 (Part No.56-450-8)

Competition Cams – Magnum 224/224 Hydraulic Roller Cam for Chevrolet 262/4.3L V6 (Part No.56-430-8)

Competition Cams – Magnum 215/220 Hydraulic Roller Cam For Chevrolet 262/4.3L (Part No.09-422-8)

Competition Cams – Magnum Computer Controlled 210/215 Hydraulic Roller Cam For Chevrolet 262/4.3L (Part No.09-415-8)

Competition Cams – Magnum 224/224 Hydraulic Roller Cam For Chevrolet 262/4.3L (Part No.09-430-8)

B & M – Tork Master 2400 (Part No.70418)

Competition Cams – 16 Springs (Part No.26986-16)

Competition Cams – ENGINE ROCKER ARM (Part No.1617-12)

Competition Cams – 16 Springs (Part No.26981-16)

Competition Cams – Magnum Double Row Timing Set for OE Roller Chevrolet V6 and 305-350 Small Block (Part No.2136)

Competition Cams – Engine Valve Spring Kit (Part No.983-16)

Competition Cams – Engine Valve Spring Kit (Part No.980-16)

MSD Ignition – Wire Set; Super Conductor; Chevy Tahoe; Sub. Vortec V8; 96-97 (Part No.32169)

Mallory – Unilite Ignition Module (Part No.605)

MSD Ignition – Coil; GM External HEI Coil; High Performance (Part No.8226)

MSD Ignition – Direct-Fit Replacement Coil with Improved Energy Output and Easy Installation (Part No.5526)

MSD Ignition – Coil; GM; External Single Connector; 96-97 (Part No.8231)

Mallory – Distributor Wiring Harness (Part No.29349)

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

MSD Ignition – Distributor; Billet; Chevy V6 Even-Fire (Part No.8597)

Accel – High-Performance Distributor Rotor for GM 4.3L-7.4L Engines (Part No.130141)

Accel – Chevy/GMC Vortec V6 High Performance Distributor Cap (Part No.120142)

Accel – Tst GM 96-00 5.0/5.7L Vortech (Part No.TST3)

MSD Ignition – Distributor Gear; MSD Chevy Distributor; .500 ID; Iron (Part No.8531)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

Energy Suspension – Hyper-Flex Polyurethane Body Cab Mount Set for Improved Ride and Durability (Part No.3.4123G)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101G)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5178G)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13102R)

Energy Suspension – Chevy Pickup Body Mount Set for Improved Ride and Durability (Part No.3.4123R)

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1444)

Flowmaster Inc. – 50 Series Muffler, 2.25in Dual Offset Inlet 3in Center Outlet, Non-Reversible, Moderate Sound (Part No.524553)

Flowtech – Shorty; Smog Headers (Part No.91832FLT)

Dynomax – Exhaust Tail Pipe (Part No.53068)

Flowmaster Inc. – Super 40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.953048)

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1402)

Flowmaster Inc. – 50 Series Muffler, 3in Offset Inlet 3in Offset Outlet, 17in long, Non-Reversible, Moderate Sound (Part No.53058)

Flowmaster Inc. – Super 50 Muffler, 2.5in Dual Offset Inlet 3in Center Outlet, Non-Reversible, Moderate Sound (Part No.8524553)

Dynomax – Exhaust Tail Pipe (Part No.54021)