1998 BMW 323is Fuel and Emissions Systems
More 1998 BMW 323is Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 1998 BMW 323is, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 1998 BMW 323is Fuel and Emissions Systems
APA/URO Parts – Ambient Temp Sensor (Part No.P4025743812APA)
from
$39.82
Ambient Temp Sensor
VDO – Fuel Tank Sender Ass (Part No.E2005124653VDO)
from
$219.12
Fuel Tank Sender Ass
MTC – Air Pump Rubber Moun (Part No.B60153351923MTC)
from
$4.88
Air Pump Rubber Moun
Delphi – Fuel Injection Pressure Regulator (Part No.FP10317)
from
$83.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
- Quiet operation, no audible regulator noise
- Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
- Consistent and predictable fuel pressure throughout system range of control provides great drivability
Carquest Premium – Fuel Cap: 10843, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10843)
from
$19.29
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Carquest Premium – Idle Air Control Valve (Part No.ABC3727)
from
$225.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Pierburg – Air Inject Check Val (Part No.B7040269654APG)
from
$42.27
Air Inject Check Val
FAE – Intake Air Temperature Sensor (Part No.C6000274885FAE)
from
$33.76
The FAE Intake Air Temperature Sensor is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Vemo – Purge Valve (Part No.B7080267466VMO)
from
$107.53
Purge Valve
ACDelco – Multi-Purpose Wire Connector with Leads (Part No.PT2164)
from
$16.79
ACDelco Professional Air Charge Temperature Sensor Connector is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, and/or engine fuel management. This premium aftermarket connector is manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Beck/Arnley – New Fuel Injector (Part No.158-0233)
from
$166.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Premium materials and all new components
- High quality construction for durability
- Constructed to withstand an engine environment
- Application specific for this vehicle
Carquest Premium – Multi Purpose Relay (Part No.RAA1749)
from
$36.49
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Beck/Arnley – Fuel Injection Pressure Regulator (Part No.158-0724)
from
$67.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Made with high quality material and componentry
- High quality construction for durability
- Constructed to withstand an underhood environment
- Application specific for this vehicle
Bosch – Fuel Pressure Regulator O-Ring (Part No.C3002290581BOS)
from
$4.63
Bosch is one of the largest global suppliers of automotive products, developing, manufacturing and supplying precision OE components and systems to vehicle manufacturers and the automotive aftermarket. 5mm x 1.5mm
See More
DENSO – First Time Fit Oxygen Sensor (Part No.C5010690449ND)
from
$160.29
Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.
Product Features:
See More
Product Features:
- SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
- DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
- ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
- STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.
Carquest Premium – Fuel Cap Tester Adapter (Part No.12426)
from
$43.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.
Product Features:
See More
Product Features:
- BAR Certified adapters
- Adapter check’s a fuel cap’s ability to hold pressure.
- Adapters meet EPA standards for recommended fleet coverage.
- Check adapter application chart for specific makes and models
Carquest – Fuel Injector Seal Kit (Part No.274838)
from
$8.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- High-quality materials withstand extreme conditions
- Undergoes extensive testing to ensure reliability
- As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process
Bosch – Fuel Injector Seal (Part No.C101016838BOS)
from
$2.05
Bosch is one of the largest global suppliers of automotive products, developing, manufacturing and supplying precision OE components and systems to vehicle manufacturers and the automotive aftermarket.
See More
Pierburg – Air Mass Meter (Part No.B3130118648APG)
from
$220.17
Pierburg manufactures a direct fit Air Mass Meter that guarantees OEM quality, fit and performance.
Product Features:
See More
Product Features:
- OEM Quality Direct fit Application
- Platinum coated sensing element
- Meets or exceeds OEM specifications
- Utilizes the factory style mounts, connectors and fittings
- Provides exceptional reliability
APA/URO Parts – Crankcase Breather Hose (Part No.B2010236628APA)
from
$29.77
Air hoses and lines for diesel and gasoline engines with additional blow-by for crankcase ventilation. Prefabricated modules in raw and clean air duct using injection-molded elastomer and plastic items, and blow-molded items.
Product Features:
See More
Product Features:
- Mount for temperature sensors
- Noise damping
- Folds and ribs for flexibility and vacuum stability
- Molded-on mounts for wires or cables
- Integrated flow divider
- Integrated positioning and attachment of prefabricated hose clamps
- Radial reinforcement for high vacuum stress in tight installation spaces
Delphi – Fuel Pump Module Assembly: With Float Arm (Part No.FG1402)
from
$239.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
- Lower amperage draws less load on vehicle’s electrical system
- Part is validated, tested and matched to the right vehicle application
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Lower failure rates due to its innovative design and durability
APA/URO Parts – Idle Control Valve Gasket (Part No.C4063267578APA)
from
$12.31
APA/URO is an industry leading gasket manufacturer, providing you original equipment design and quality and world class aftermarket service.
Product Features:
See More
Product Features:
- Original equipment design and quality
- Utilizes OE equivalent or better materials
- Meets or exceeds OEM specifications
Pierburg – Electronic Change Over Valve (Part No.B7075343168APG)
from
$60.44
Electronic Change Over Valve
Carquest Premium – Barometric Pressure Sensor Connector (Part No.PTA1104)
from
$21.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Rein – Air Flow Meter Boot (Part No.ABV0208)
from
$44.99
Rein Automotive OE quality boots fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE boots, Rein boots are identical to the OEM.
Product Features:
See More
Product Features:
- Direct fit for easy installation.
- Manufactured with high quality materials.
- Matches original equipment design specifications.
- Resistant to heat, salt, road debris, oil and other contaminants
Pierburg – Secondary Air Pump (Part No.B6010104979APG)
from
$482.70
Pierburg a global supplier to European automakers manufactures an OE-equivalent direct fit Air Pump that maintains the quality and performance of the Original Equipment it replaces. Pierburg designed a modular system of brackets, and vibration absorbing elements to ensure that the secondary air pump does not interact with its mounting location.
Product Features:
See More
Product Features:
- OE design
- Low noise
- Long working life
- High thermal and mechanical resistance
- Sealed bearing design
- Housing sealed to protect against contamination
- High output DC motor
- Exact OE Body and engine mounting
Cardone – Smog Air Pump (Part No.33-2201M)
from
$511.99
CARDONE Remanufactured Smog Pumps are engineered for quick installation and no comebacks. These pumps come with all necessary components for easy installation, while other brands leave out integral components, such as inlets and outlets that commonly break during installation. CARDONE engineers pay special attention to proper vane size and shape on each application to maintain proper flow, while other brands consolidate vane sizes for their own convenience.
Product Features:
See More
Product Features:
- 100% testing of all units guarantees reliable performance every time
- High temperature grease extends bearing life, resulting in longer pump life
- New carbon shoes/vanes on every unit ensure accurate air output to meet today’s stringent emissions standards
- Guaranteed fit and function
- Meets or exceeds O.E.M performance
Popular 1998 BMW 323is Fuel and Emissions Systems Categories
1998 BMW 323is Fuel and Emissions Systems
You count on your 1998 BMW 323is to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 47 Fuel and Emissions Systems ranging in price from $2.05 to $511.99, you’re sure to find everything you need for your 1998 BMW 323is.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 20 different brands like Delphi, Carquest Premium, and Vemo. 1998 BMW 323is Fuel and Emissions Systems start as low as $2.05!
One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 14 extensive product reviews on 1998 BMW 323is Fuel and Emissions Systems. Some of the top-rated Fuel and Emissions Systems products we carry are Mass Air Flow Sensor with 1.5 stars.
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 1998 BMW 323is below to get started!
Top-Rated Fuel and Emissions Systems Brands For Your 1998 BMW 323is
Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1998 BMW 323is running right for years to come. In our inventory you’ll find brands like Delphi, Carquest Premium, Vemo, and even more.
Popular Carquest Premium Fuel and Emissions Systems
You’ll find popular Carquest Premium brand products across Gas Caps. All are waiting to get your 1998 BMW 323is back on the road. Some of the top-rated Carquest Premium products in these categories are:
FAQs for 1998 BMW 323is Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 1998 BMW 323is?
Out of 47 Fuel and Emissions Systems for the 1998 BMW 323is, the most popular in our inventory are:
from
$21.99
This product is not rated
Barometric Pressure Sensor Connector
Mass Air Flow Sensor Connectors
What are the top-rated 1998 BMW 323is Fuel and Emissions Systems?
Top-rated Fuel and Emissions Systems for your 1998 BMW 323is based on customer reviews/ratings are:
from
$339.99
(2)
Mass Air Flow Sensor
“1st rear wheel bearing had a defective wheel speed sensor code CO210. So I contacted Advance customer service. Their representative was very helpful a”
