1998 Acura CL Ignition Coils and Boots
More 1998 Acura CL Ignition Coils and Boots
Find your specific 1998 Acura CL original or aftermarket Ignition Coils and Boots below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1998 Acura CL Ignition Coils and Boots
DENSO – Spark Plug Wire Set: Aluminum Steel Core, 6 Wire Set (Part No.671-6189)
from
$104.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
- Identical OE end caps are designed to “click” into place for easy installation and a secure fit
- Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
NGK – Spark Plug Wire Set (Part No.8044)
from
$144.99
NGK variable pitch resistor cables provide uniform resistance and ensure outstanding electrical conductivity in high-quality cables. Outer EPDM/silicone jacket and inner insulation contain high voltage currents for excellent dielectric strength. NGK varia
Product Features:
See More
Product Features:
- PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
- BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
- STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
- PREMIUM ALLOY WINDING: Variable pitch winding over Ferrite magnetic alloy coating delivers ultra low resistance and excellent interference protection
- CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
Carquest Premium – Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit (Part No.35-6057)
from
$96.99
Product Features:
See More
- SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
- Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
- 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
- EPDM inner insulation stops power-robbing voltage leaks.
- With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
- Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
- Excellent interference suppression and consistent performance
- Easy lock terminals for more convenient installation.
- Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
- Broad coverage available for most vehicles on the road today
- Include grease pack to ensure easy installation and removal
NGK – Ignition Wire Set (Part No.F1020115849NGK)
from
$103.44
NGK Resistor Spark Plug Wire Sets utilize a construction method known as variable pitch wire winding to create resistance to radio frequency interference. The variable pitch winding (loose/tight/loose) provides suppression throughout a very wide range by scrambling and breaking up the electrical waves radiated by the firing of the spark plugs. A ferrite magnetic layer consisting of a mixture of rubber, plastic and powdered ferrite magnetic materials, offers uniform resistance and unsurpassed conductivity. NGK wires have a lower resistance than conventional carbon core wires (8k ohm/meter versus 16k ohm/meter). This comparison is important to remember when you consider that many manufacturers recommend wires be replaced when the resistance exceeds 20k ohm/meter. This does not leave much margin for wear when the wire may only meet original standards at the very early stages of its life.
Product Features:
See More
Product Features:
- OE-Equivalent.
- OEM style connectors for easy Installation.
- Superior Firing and Fuel Savings
- Outstanding Durability and Performance
- Excellent Noise Suppression
- Numbered for easy cylinder identification.
- High quality EPDM and Silicone coverings.
Carquest Premium – Ignition Coil (Part No.EBC1638)
from
$45.99
Carquest Premium engine management products provide the right ignition coils for a wide range of domestic and import applications. They deliver the highest performance and durability under demanding conditions. Designed to meet OE quality and performance standards using top-quality components, our ignition coils are the best choice for your maintenance and repair needs.
Product Features:
See More
Product Features:
- Coils are designed and engineered to be an OE quality replacement for fit and performance
- High-strength dielectric epoxy and 100% copper windings used to deliver high-temperature performance and vibration resistance
- High-efficiency laminations produce a high-energy spark and reliable performance
- Factories use ISO 9001 and IATF 16949 standards to deliver products designed to meet or exceed OE voltage output specifications
- Top-quality components and materials used to deliver maximum performance and long service life under tough operating conditions
Delphi – Ignition Coil (Part No.GN10171)
from
$73.99
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.
Product Features:
See More
Product Features:
- Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
- Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
- Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
- We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1734)
from
$89.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Built by IATF 16949 certified manufacturers for consistent durability
- Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
- Segmented secondary bobbins to distribute high voltage and prevent shorting
- Extensive design validation testing to ensure long-lasting reliability
- 100% end-of-line tested to ensure proper performance
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Hitachi – Ignition Coil (Part No.F3000101545HIT)
from
$107.36
The Hitachi Ignition Coil is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application
- Enhances durability and increases energy transfer
- Reduces misfires, rough timing and intermittent starting
- High profile insulation to prevent arching
- Radio-Frequency Interference (RFI) Suppression
- Engineered to withstand extremes in temperatures
Hitachi – Direct Ignition Coil – (Coil on Plug) (Part No.F3005436270HIT)
from
$104.10
The Hitachi Ignition Coil is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application
- Enhances durability and increases energy transfer
- Reduces misfires, rough timing and intermittent starting
- High profile insulation to prevent arching
- Radio-Frequency Interference (RFI) Suppression
- Engineered to withstand extremes in temperatures
Delphi – Ignition Coil (Part No.GN10168)
from
$71.99
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.
Product Features:
See More
Product Features:
- Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
- Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
- Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
- We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
Hitachi – Ignition Coil Actual OE Part – New (Part No.IGC0066)
from
$73.99
Hitachi’s Ignition Coils (IGCs) provide the needed energy for today’s high efficiency, high power vehicles. High quality materials ensure that even under the most extreme conditions, Hitachi’s IGCs will not deform or malfunction. Our ignition coils help to produce optimal engine efficiency resulting in reliable performance and gas mileage. Electronic connection points are welded to providing durability during heat cycles. Details such as materials, high turns ratios, and protected circuitry provide a durable and reliable product approved by OE manufacturers. Designed to meet the exact needs of each specific vehicle, Hitachi’s ignition coils are the premium choice.
Product Features:
See More
Product Features:
- Benefits of these quality Ignition Coils include efficient spark and reduced need for wires, long product life, and consistent voltage and amperage output.
Carquest – Ignition Coil (Part No.E420)
from
$57.05
Intermotor® is a complete engine management import line that includes ignition and electrical relays, switches and sensors with a concentration on high technology categories such as computerized engine controls, fuel injection, and emission controls with coverage for every part number with an import nameplate. Intermotor® parts are unrivalled for quality, original fit, form, function, and coverage providing a genuine import part in every box. Intermotor® is the import leader by design.
Product Features:
See More
Product Features:
- 100% pure copper windings in primary and secondary bobbins improve durability and provide higher resistance to internal shorts and dielectric breakdown
- Electronic ignition module profile and feedback signal ensures proper OE fit, form, and function
- Thermoplastic housing withstands heat stress for enhanced durability
- Internal core made from grain-oriented electrical steel limits loss factor within magnetic circuit to reduce heat that may reduce coil endurance
- External core made from oriented silicon steel ensures durability and longevity
- Neodymium magnet produces max high voltage output at all speeds
- Stainless steel spring resists corrosion
- Tin-plated brass terminals improve electrical contact and protect against corrosion
DENSO – Original Equipment Quality Direct Ignition Coil (Part No.673-2310)
from
$72.99
As the innovator and leader in stick coil technology DENSO has conducted superior testing and inspection processes to insure the highest quality ignition coil. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.
Product Features:
See More
Product Features:
- First Time Fit
- Built to DENSO Original Equipment Standards
Popular 1998 Acura CL Ignition Coils and Boots Categories
1998 Acura CL Ignition Coils and Boots
Maybe you’re in the middle of a full rebuild of that 1998 Acura CL. Maybe you just need a couple of Ignition Coils and Boots. Either way, Advance Auto Parts has 10 different Ignition Coils and Boots in our inventory ranging from $45.99 to $144.99. That means you can find the exact parts or products you need to keep that 1998 Acura CL running smoothly.
Ignition Coils and Boots are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 1998 Acura CL. Carquest Premium, NGK, and Delphi are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Ignition Coils and Boots for your 1998 Acura CL, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Ignition Coils and Boots to keep your 1998 Acura CL rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Ignition Coils and Boots Brands To Make Your 1998 Acura CL Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1998 Acura CL demands trusted brand parts and products to keep it running. Many trusted brands of Ignition Coils and Boots make up Advance Auto Parts’ inventory, and all are ready to help make your CL the best it can be. Be sure to browse some of our top Ignition Coils and Boots brands and parts.
Popular NGK Ignition Coils and Boots
We carry NGK parts in our stock across Ignition Coil Boots categories, plus more. For a 1998 Acura CL, our most popular NGK Ignition Coils and Boots include:
Top 1998 Acura CL Ignition Coils and Boots from Hitachi
Hitachi products are another trusted brand when it comes to Ignition Coils and Boots for your 1998 Acura CL. Popular Hitachi parts include:
FAQs for 1998 Acura CL Ignition Coils and Boots
What are the most purchased Ignition Coils and Boots for the 1998 Acura CL?
Out of 10 Ignition Coils and Boots for the 1998 Acura CL, the most popular in our inventory are:
from
$96.99
This product is not rated
Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit
Ignition Coil Boots
