1997 Volvo S90 Steering and Chassis Parts

Essential 1997 Volvo S90 Steering and Chassis Parts

MOOG – Suspension Ball Joint (Part No.K9141)

Suspension Ball Joint

from

$31.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • Hardened ball stud made of OE equivalent or better materials to withstand higher loads
  • Easy to install.
  • Construction and design validated by MOOG engineers
  • Premium forged housing with increased cross section of up to 52% more material in key areas
  • Broad coverage for foreign and domestic applications
  • Designed to meet or exceed original equipment performance
See More

Carquest Premium – Bulk – 3/8" I.D. Return Hose CPE (Part No.36219)

Bulk - 3/8" I.D. Return Hose CPE

from

$38.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Rare Parts – Ball Joint (Part No.RP10437)

Ball Joint

from

$53.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Heat treated components
  • Dust seal to prevent contamination
  • Restores vehicle handling
  • Restores OE alignment
See More

Rare Parts – Tie Rod End (Part No.RP26873)

Tie Rod End

from

$146.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Restores OE alignment
  • Reduces tire wear
  • Improves steering response
See More

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Transmission Oil Cooler Reinstallation Kit

from

$20.79
Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.

Product Features:
  • Transmission cooler reinstallation kit
  • Contains part numbers 248001, 226201, 240250 and 4 hose clamps
  • Provides all hardware for reinstallation of Imperial transmission coolers
  • Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
See More

Driveworks – Tapered Roller Bearing (Part No.S-HM-89410)

Tapered Roller Bearing

from

$4.99
Product Features:
  • Brand may vary by location
See More

Maval – Power Steering Pump, Remanufactured (Part No.M2010168399MAV)

Power Steering Pump, Remanufactured

from

$350.80
Since its founding in 1987 Maval Manufacturing has been a world leader in the remanufacturing of power rack and pinion systems and related components. Trusted by Original Equipment Service Organizations and Global Distributors alike, Maval has consistently delivered the finest Remanufactured Rack and Pinions, Gear Boxes, and Power Steering Pumps to customers around the globe. Applying OE-experience and standards results in a remanufactured power steering pump that offer like-new quality and dependability.

Product Features:
  • OEM-Quality and Direct Fit replacement
  • Components are inspected and cleaned of rust and corrosion.
  • Shaft and internal surfaces are inspected, reconditioned and polished.
  • Seals and O-rings are replaced with new, OE-equivalent parts.
  • Assembled units are 100% functionally tested for leaks and performance.
See More

Imperial – Quick Connect Coupler (Part No.240250)

Quick Connect Coupler

from

$11.49
Imperial transmission line fitting kits allow for the installation of auxiliary cooler lines without cutting the vehicle’s original metal lines.

Product Features:
  • Quick Connect coupler
  • Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
  • Simplifies transmission cooler installation
  • Allows for auxiliary transmission cooler installation without cutting OE lines
See More

Driveworks – Camber Bolt Kit (Part No.DW-K90473)

Camber Bolt Kit

from

$17.99
Camber Bolt Kit

Cardone – Power Steering Filter (Part No.20-0058F)

Power Steering Filter

from

$48.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Carquest Premium – Bulk – 3/8" ID Return Hose (CPE) (sold by each) (Part No.34995)

Bulk - 3/8" ID Return Hose (CPE) (sold by each)

from

$2.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Professional Parts Sweden – P/S Hose O-Ring (Part No.M201997565PPS)

P/S Hose O-Ring

from

$1.27
P/S Hose O-Ring

MOOG – Camber Adjusting Kit (Part No.K90473)

Camber Adjusting Kit

from

$30.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can bring vehicles back to factory specification
  • Can solve excessive tire wear and steering issues
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
  • Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
See More

MOOG – Camber Adjusting Kit (Part No.K9757)

Camber Adjusting Kit

from

$42.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can bring vehicles back to factory specification
  • Can solve excessive tire wear and steering issues
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
  • Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
See More

MTC – Sway Bar Link Bushing (Part No.L103115748MTC)

Sway Bar Link Bushing

from

$2.28
The MTC Sway Bar Link Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

MOOG – Rack & Pinion Bellows Kit (Part No.K9882)

Rack & Pinion Bellows Kit

from

$39.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Manufactured using premium materials
  • Engineered to provide long life and dependability
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
See More

EMPI – Steering Rack Boot Kit, 1 Boot + Clamps (Part No.M1030151064EMP)

Steering Rack Boot Kit, 1 Boot + Clamps

from

$19.37
Steering Rack Boot Kit, 1 Boot + Clamps

Rein – Sway Bar Link Bushing (Part No.AVB0658)

Sway Bar Link Bushing

from

$3.49
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts.

Product Features:
  • All Rein automotive bushings are hydraulic or rubber-to-metal based on the original equipment mount, ensuring the parts performs like original.
  • Manufactured to strict engineering standards/specifications in materials and tolerances.
  • Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity.
  • Recommend to replace bushings in pairs to ensure best performance. note: control arm bushing kits contain the needed pair.
See More

Maval – Complete Steering Rack, Remanufactured (Part No.M1000106200MAV)

Complete Steering Rack, Remanufactured

from

$413.10
Maval Manufacturing is a Global leader in the production of remanufactured steering racks that meet or exceed the OE requirements set by the vehicle manufacturers. Maval uses only the highest quality OE parts in the remanufacturing process and each unit goes through a comprehensive inspection process that must meet OE performance specifications.

Product Features:
  • OE quality and direct fit replacement
  • Remanufacture based on highest quality standards
  • Computerized tests insure that all products meet the OE performance specification.
  • Performance and quality approvals from OE steering gear and pump manufacturers world wide
See More

MOOG – Stabilizer Bar Link (Part No.K750825)

Stabilizer Bar Link

from

$42.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Improves upon OE designs
  • Quiet, dependable operation
  • Provides like-new steering, ease of installation and longer life
  • Incorporates proven design and engineering features
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

MOOG – Suspension Stabilizer Bar Link (Part No.K90709)

Suspension Stabilizer Bar Link

from

$42.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Improves upon OE designs
  • Quiet, dependable operation
  • Provides like-new steering, ease of installation and longer life
  • Incorporates proven design and engineering features
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

MOOG – Stabilizer Bar Link (Part No.K750818)

Stabilizer Bar Link

from

$38.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Improves upon OE designs
  • Quiet, dependable operation
  • Provides like-new steering, ease of installation and longer life
  • Incorporates proven design and engineering features
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

MOOG – Stabilizer Bar Link (Part No.K750819)

Stabilizer Bar Link

from

$38.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Improves upon OE designs
  • Quiet, dependable operation
  • Provides like-new steering, ease of installation and longer life
  • Incorporates proven design and engineering features
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

Driveworks – Camber Bolt Kit (Part No.DW-K9757)

Camber Bolt Kit

from

$24.99
Driveworks Brand Camber Cam Bolt Kit is mainly used for car chassis suspension system

Product Features:
  • Meets or exceeds OE performance specifications
  • Precision engineered for improved ride and superior performance
  • Performance tested to ensure durability
See More

1997 Volvo S90 Steering and Chassis Parts

You count on your 1997 Volvo S90 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 42 Steering and Chassis Parts ranging in price from $1.27 to $413.10, you’re sure to find everything you need for your 1997 Volvo S90.

Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 17 different brands like Imperial, Cardone, and Carquest Premium. 1997 Volvo S90 Steering and Chassis Parts start as low as $1.27!

One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 304 extensive product reviews on 1997 Volvo S90 Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Bulk – 3/8" I.D. Return Hose CPE with 4.4 stars and Camber Bolt Kit with 4.7 stars.

Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1997 Volvo S90 below to get started!

Top-Rated Steering and Chassis Parts Brands For Your 1997 Volvo S90

Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1997 Volvo S90 running right for years to come. In our inventory you’ll find brands like Imperial, Cardone, Carquest Premium, and even more.

Popular Cardone Steering and Chassis Parts

You’ll find popular Cardone brand products across Power Steering Parts. All are waiting to get your 1997 Volvo S90 back on the road. Some of the top-rated Cardone products in these categories are:
Power Steering Filter
from $46.99
(1)
Power Steering Filter
Power Steering Filters
Power Steering Filter
from $48.49
(2)
Power Steering Filter
Power Steering Filters
Power Steering Filter
from $31.99
(59)
Power Steering Filter
Power Steering Filters

Top-Rated Imperial Steering and Chassis Parts


If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Steering and Chassis Parts for your 1997 Volvo S90, and some of our most reviewed Imperial parts include:
Transmission Oil Cooler Hose
from $32.49
(94)
Transmission Oil Cooler Hose
Power Steering Pressure Hoses
Power Steering Oil Cooler
from $28.49
(83)
Power Steering Oil Cooler
Power Steering Coolers
Mounting Kit System
from $11.49
(27)
Mounting Kit System
Power Steering Coolers

FAQs for 1997 Volvo S90 Steering and Chassis Parts

What are the most purchased Steering and Chassis Parts for the 1997 Volvo S90?

Out of 42 Steering and Chassis Parts for the 1997 Volvo S90, the most popular in our inventory are:
Bulk - 3/8" ID Return Hose (CPE) (sold by each)
from $2.99
This product is not rated
Bulk – 3/8" ID Return Hose (CPE) (sold by each)
Power Steering Return Hoses
Quick Connect Coupler
from $11.49
(3)
Quick Connect Coupler
Power Steering Pressure Hoses
Transmission Oil Cooler Reinstallation Kit
from $20.79
(4)
Transmission Oil Cooler Reinstallation Kit
Power Steering Coolers

What are the top-rated 1997 Volvo S90 Steering and Chassis Parts?

Top-rated Steering and Chassis Parts for your 1997 Volvo S90 based on customer reviews/ratings are:
Bulk - 3/8" I.D. Return Hose CPE
from $38.99
(8)
Bulk – 3/8" I.D. Return Hose CPE
“Hose”
Camber Bolt Kit
from $17.99
(7)
Camber Bolt Kit
“Worked perfect!”
Camber Adjusting Kit
from $30.99
(5)
Camber Adjusting Kit
“Works as designed to adjust camber to spec”