1997 Toyota Tacoma Air Conditioning Parts

Essential 1997 Toyota Tacoma Air Conditioning Parts

Santech – Air Conditioning O-Ring Kit (Part No.R1151317332SII)

Air Conditioning O-Ring Kit

from

$12.72
Air Conditioning O-Ring Kit

KAI – A/C System Seal Kit (Part No.FTT010050)

A/C System Seal Kit

from

$19.99
New Standard Replacement A/C System Seal Kit, MT2580, L3 Engine

Product Features:
  • MT2580, L3 Engine
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – A/C Liquid Line Hose Assembly w/o Orifice Tube (Part No.T56541)

A/C Liquid Line Hose Assembly w/o Orifice Tube

from

$27.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.6283)

A/C Condenser and Receiver Drier Assembly

from

$245.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specificat

Product Features:
  • This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
  • This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
  • The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
  • Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
  • Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
  • Our condensers are manufactured from rigid design standards to fit OEM dimensions.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
  • Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges. The package passes the fre
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak. This industry leading process is the most precise method and can detect even the smallest leak. The leak-free condenser is then charged with nitrogen and
  • Our condensers are manufactured from rigid design standards to match OEM dimensions. Each design undergoes a drop fit into the actual vehicle to ensure the final manufactured product provides an easy installation.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
  • vibration testing
  • blast testing
  • and salt spray testing to simulate real world conditions.
See More

DENSO – First Time Fit A/C Expansion Valve (Part No.R1045118917ND)

First Time Fit A/C Expansion Valve

from

$64.84
Denso manufactures an A/C Expansion Valve that is the same quality fit and performance of the OE Expansion Valve it replaces.

Product Features:
  • OEM Quality and Direct fit Application
  • Designed to the exact OEM specifications
See More

Carquest – Multi Purpose Relay (Part No.83A1006)

Multi Purpose Relay

from

$16.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • High-quality products that meet OE appearance and performance to
See More

Carquest – A/C Compressor Control Relay (Part No.R6034)

A/C Compressor Control Relay

from

$15.05
The Intermotor brand has built its reputation by engineering and distributing a full line of genuine import parts – parts that are unrivaled for quality, original look, fit, form & function, as well as coverage.

Product Features:
  • Premium components and our own manufactured circuit board ensure precise operation, reliability, and extra durability for a longer service life
  • Our electronic voltage regulator PC boards are encapsulated in epoxy to deliver improved performance and resistance to failure that may be caused by vibration and corrosion of electrical connections
  • All parts are manufactured to stringent quality requirements. Our plants are TS16949 and ISO9001 certified which ensures that every part is the right part for the right vehicle.
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

DENSO – New Compressor With Clutch (Part No.471-1223)

New Compressor With Clutch

from

$327.99
As one of the world+s largest OE suppliers of A/C compressors DENSO units are specified by most major vehicle manufacturers. DENSO First Time Fit A/C compressors are manufactured and tested to the strictest OE standards for unparalleled performance. At DENSO we bring together everything we know as an air conditioning systems manufacturer to bring you the highest quality line of factory-new compressors available. When it comes to new compressors you can’t do better than going with a unit manufactured by the OE supplier. At DENSO we know these units better than anyone because we originally designed them. Our compressors are built to meet DENSO+s unsurpassed reputation for technological superiority. You can relax knowing DENSO will give you the right part and the right fit the first time.

Product Features:
  • DENSO is the world’s largest OE supplier of A/C compressors
  • Each compressor is precision manufactured for exact replacement
  • Designed for high output and extended durability
  • Highest quality in the Aftermarket
See More

Carquest Premium – A/C Suction Line Hose Assembly (Part No.T56316)

A/C Suction Line Hose Assembly

from

$54.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – A/C Compressor and Component Kit (Part No.1032K)

A/C Compressor and Component Kit

from

$396.99
Save time on installation with everything you need in one box for an air conditioning replacement. The Carquest Premium A/C Compressor and Component Kit includes the necessary compressor, accumulator/receiver drier, and orifice tube/expansion valve, along with the necessary O-rings, gaskets, and oil. The parts are manufactured with strict quality standards from Gilmore, a climate control partner to Advance Auto Parts for over 25 years.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • Accumulators and receiver driers meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators are helium leak tested prior to packaging.
  • Each orifice tube and expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • The specific PAG oil required by your vehicle application is included.
  • O-rings and gaskets for all parts are application specific and packaged with the correct part to save time and eliminate the possibility of a leak from using the wrong O-ring or gasket.
See More

Carquest Premium – ABS sensor (Part No.ARC1067)

ABS sensor

from

$167.99
Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:
  • High grade materials that are equal to or better than OE provide durability and long service life
  • All ABS sensors are tested for proper fit, form, and function
  • Wire diameter and sheathing same or larger than OE to ensure product quality
  • Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
  • Includes all necessary brackets and hardware
See More

KAI – A/C Service Valve (Part No.FTT010751)

A/C Service Valve

from

$9.99
New Standard Replacement A/C Service Cap And Valve Kit, MT2909

Product Features:
  • MT2909
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – A/C Condenser (Part No.CNDDPI3393)

A/C Condenser

from

$134.99
New Platinum Pro A/C Condenser, Models Up To Production Date 3/2012

Product Features:
  • Models Up To Production Date 3/2012, Made Of Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – A/C Clutch Cycle Switch (Part No.ABA1029)

A/C Clutch Cycle Switch

from

$12.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26816)

O-Ring & Gasket A/C System Seal Kit

from

$32.49
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All the seals needed to complete the job
  • Compatible with both R134a and R12 refrigerants
  • Application specific
  • SUV and rear air applications
See More

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26749)

O-Ring & Gasket A/C System Seal Kit

from

$18.49
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All the seals needed to complete the job
  • Compatible with both R12 and R134a refrigerants
  • Application specific
  • SUV and rear air applications
See More

Carquest Premium – A/C Compressor Relay Connector (Part No.PTC1099)

A/C Compressor Relay Connector

from

$52.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest – Electrical Connector (Part No.PT914)

Electrical Connector

from

$54.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Utilizing high grade materials to ensure peak conductivity and perfect connections
  • Decades of industry leading research and development focused on meeting the technician’s needs
  • With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
See More

KAI – A/C Evaporator Core (Part No.EVA010463)

A/C Evaporator Core

from

$119.99
New Standard Replacement A/C Evaporator Core

Product Features:
  • Made Of Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – A/C Plate and Fin Evaporator (Part No.T44050)

A/C Plate and Fin Evaporator

from

$107.99
Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
  • The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
  • The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
  • The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
  • O-Rings and gaskets necessary for installation are included.
See More

Carquest Premium – A/C Discharge Line Hose Assembly (Part No.T55176)

A/C Discharge Line Hose Assembly

from

$43.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – A/C Discharge Line Hose Assembly (Part No.T56302)

A/C Discharge Line Hose Assembly

from

$60.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
  • O-Rings necessary for installation are included.
See More

Santech – A/C Pressure Switch (Part No.R1054268883SII)

A/C Pressure Switch

from

$24.22
A/C Pressure Switch

Autopart International Inc – A/C Compressor (Part No.R10003199983API)

A/C Compressor

from

$284.06
A/C Compressor

KAI – A/C Compressor, L4 Engine (Part No.ACP010670)

A/C Compressor, L4 Engine

from

$419.99
New Standard Replacement A/C Compressor, L4 Engine

Product Features:
  • L4 Engine
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Standard – A/C Remanufactured; w/ Clutch; w/ 10PA15C Compressor (Part No.DW77360)

A/C Remanufactured; w/ Clutch; w/ 10PA15C Compressor

from

$279.99
Carquest Standard Remanufactured Compressors are manufactured to meet original equipment specifications. All components are either remanufactured to strict standards or are replaced with new components to ensure performance and durability. All compressors are 100% end of line tested.

Product Features:
  • O-Rings and gaskets necessary for installation are included.
  • All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
  • All units have new seals, O-rings, gaskets and clutch bearings
  • Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
See More

Carquest Standard – Reman Nippondenso 10PA15C Compressor w/ Clutch (Part No.DW77335)

Reman Nippondenso 10PA15C Compressor w/ Clutch

from

$179.99
Carquest Standard compressors offer reliable, long-lasting performance for a leak-free, dependable repair.

Product Features:
  • Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function and durability
  • All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
  • All units have new seals, O-rings, gaskets and clutch bearings
  • Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
See More

Metrix – A/C Compressor w/ Clutch, New (Part No.R1000143387MTX)

A/C Compressor w/ Clutch, New

from

$300.84
METRIX A/C compressors provide OE quality, high efficiency, and reliable performance, combined with superior features including an exact fit, higher pumping capacity and an advanced clutch design for longer life. All METRIX A/C compressors are 100% new and contain NO remanufactured parts. All compressors are equipped with a new clutch assembly, and include O-rings and installation instructions.

Product Features:
  • OE-Quality – Exact Fit
  • Low Power Demand
  • Guarantees OE quality performance, durability and fitment.
  • 100% Brand new with no remanufactured parts.
  • Equipped with a new clutch assembly.
  • Manufactured using the highest quality components
  • Meets or exceeds the manufacturers specifications for fit quality and durability.
See More

1997 Toyota Tacoma Air Conditioning Parts

Maybe you’re in the middle of a full rebuild of that 1997 Toyota Tacoma. Maybe you just need a couple of Air Conditioning Parts. Either way, Advance Auto Parts has 45 different Air Conditioning Parts in our inventory ranging from $9.99 to $409.99. That means you can find the exact parts or products you need to keep that 1997 Toyota Tacoma running smoothly.

Air Conditioning Parts are only as good as their brand. We stock 9 different brands to make sure you have plenty of trusted parts to choose from for your 1997 Toyota Tacoma. Factory Air, Carquest Premium, and Carquest are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Air Conditioning Parts for your 1997 Toyota Tacoma, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 208 reviews in this category, some of the top rated parts include A/C Plate and Fin Evaporator with 4.5 stars and Reman Nippondenso 10PA15C Compressor w/ Clutch with 3.0 stars.

So if you’re in the market for aftermarket Air Conditioning Parts to keep your 1997 Toyota Tacoma rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Air Conditioning Parts Brands To Make Your 1997 Toyota Tacoma Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1997 Toyota Tacoma demands trusted brand parts and products to keep it running. Many trusted brands of Air Conditioning Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Tacoma the best it can be. Be sure to browse some of our top Air Conditioning Parts brands and parts.

Popular Factory Air Air Conditioning Parts

We carry Factory Air parts in our stock across AC Line O-Rings and AC Caps and Valve Core Kits categories, plus more. For a 1997 Toyota Tacoma, our most popular Factory Air Air Conditioning Parts include:
O-Ring & Gasket A/C System Seal Kit
from $18.49
(3)
O-Ring & Gasket A/C System Seal Kit
AC Line O-Rings
Cap & Valve A/C System Seal Kit
from $17.99
(29)
Cap & Valve A/C System Seal Kit
AC Caps and Valve Core Kits

FAQs for 1997 Toyota Tacoma Air Conditioning Parts

What are the most purchased Air Conditioning Parts for the 1997 Toyota Tacoma?

Out of 45 Air Conditioning Parts for the 1997 Toyota Tacoma, the most popular in our inventory are:
A/C Filter Drier w/ Pad Mount
from $21.99
(7)
A/C Filter Drier w/ Pad Mount
Accumulator and Receiver Driers
Multi Purpose Relay
from $16.99
This product is not rated
Multi Purpose Relay
AC Compressor Cut-Out Relays
A/C Block Type Flange Expansion Valve
from $46.49
(9)
A/C Block Type Flange Expansion Valve
Expansion Valve and Orifice Tubes

What are the top-rated 1997 Toyota Tacoma Air Conditioning Parts?

Top-rated Air Conditioning Parts for your 1997 Toyota Tacoma based on customer reviews/ratings are:
A/C Plate and Fin Evaporator
from $139.99
(2)
A/C Plate and Fin Evaporator
“Accurate fit no leaks”
Reman Nippondenso 10PA15C Compressor w/ Clutch
from $179.99
(2)
Reman Nippondenso 10PA15C Compressor w/ Clutch
“Ordered the part online, picked up at store in less than 1 hour. Great price and customer service. Part performed excellent. Will do business again”
A/C Condenser
from $133.99
(1)
A/C Condenser
“Good price and fit”