1997 Saturn SW Series Ignition and Tune-Up Products

Essential 1997 Saturn SW Series Ignition and Tune-Up Products

Dorman – Help – Spark Plug Non-Foulers – 14mm Gasket Seat Long Reach (Part No.42004)

Spark Plug Non-Foulers - 14mm Gasket Seat Long Reach

from

$9.99
This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
  • Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
  • Durable construction – made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

DENSO – Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, last 100K+ Miles, IK16TT (Part No.4701)

Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, last 100K+ Miles, IK16TT

from

$10.99
Durability of an OE style plug combined with Power & Torque of high performance.

Product Features:
  • 0.4mm Iridium Center Electrode: World’s Smallest Diameter that maximizes firing potential
  • 0.7mm Needle Tip Ground Electrode: Promotes higher spark energy and less heat quenching
  • DENSO Patented Optimized Iridium-Rhodium Alloy Formula: Highest concentration of Iridium vs. competitors for greater durability
  • DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
  • Durability of an OE style plug combined with Power & Torque of high performance.
  • Withstands temperatures greater than 4000┬░ Fahrenheit
  • Iridium TT
  • Ultimate Endurance and Power: The DENSO Iridium TT Spark Plug features a 0.7mm Iridium Tip, ensuring over 100,000 miles of uncompromised performance.
  • Advanced Twin-Tip Technology: Developed from Original Equipment Specification Super Ignition Plug (SIP) design, combining a Fine Wire Iridium Center Electrode with a Needle Tip Platinum Ground Electrode.
  • Enhanced Fuel Economy and Lower Emissions: Drive around the Earth over 4 times with improved fuel efficiency and reduced emissions.
  • Premium Materials: Features an Iridium Center Electrode Tip and a Flat Seat Type for optimal performance and durability.
See More

Champion – Copper Plus Spark Plug: Dependable Performance, OE Replacement, RC14YC (Part No.431)

Copper Plus Spark Plug: Dependable Performance, OE Replacement, RC14YC

from

$2.99
Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.

Product Features:
  • Copper Plus – Dependable Performance and Durability
  • Copper core center electrode allows for accurate control of heat range for longer life
  • Superior corrosion resistance
  • Built to ISO and SAE standards for proven performance
  • Built to ISO and SAE standards for proven performance
See More

Carquest Premium – Ignition Switch (Part No.CSA2083)

Ignition Switch

from

$67.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Ignition Switch (Part No.CSC1372)

Ignition Switch

from

$86.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Spark Plug Wire Set: 4 Wires, Increased performance, Designed for direct fit (Part No.35-4123)

Spark Plug Wire Set: 4 Wires, Increased performance, Designed for direct fit

from

$32.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

Carquest Premium – Spark Plug Wire Set: 4 Wires, Increased performance, Designed for direct fit (Part No.35-4122)

Spark Plug Wire Set: 4 Wires, Increased performance, Designed for direct fit

from

$31.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

Delphi – Ignition Coil (Part No.GN10128)

Ignition Coil

from

$41.49
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.

Product Features:
  • Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
  • Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
  • Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
  • We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
See More

Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1085)

Ignition Coil: Meets OE Specifications, 1 Count

from

$31.99
Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle¿s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Long service life and durable performance
  • High dielectric strength for reliability
  • Corrosion-resistant connections
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
  • High reliability
  • Long service life
See More

Hitachi – Ignition Coil Actual OE Part – New (Part No.IGC0086)

Ignition Coil Actual OE Part - New

from

$41.49
Hitachi’s Ignition Coils (IGCs) provide the needed energy for today’s high efficiency, high power vehicles. High quality materials ensure that even under the most extreme conditions, Hitachi’s IGCs will not deform or malfunction. Our ignition coils help to produce optimal engine efficiency resulting in reliable performance and gas mileage. Electronic connection points are welded to providing durability during heat cycles. Details such as materials, high turns ratios, and protected circuitry provide a durable and reliable product approved by OE manufacturers. Designed to meet the exact needs of each specific vehicle, Hitachi’s ignition coils are the premium choice.

Product Features:
  • Benefits of these quality Ignition Coils include efficient spark and reduced need for wires, long product life, and consistent voltage and amperage output.
See More

DENSO – First Time Fit Ignition Wire (Part No.F1030332892ND)

First Time Fit Ignition Wire

from

$37.78
The Denso First Time Fit ignition wire are identical in form, fit, color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES specifications. The Denso 7 and 8mm ignition wires are SAE J2031 Class E rated, the highest quality wire used in the industry. These wires can withstand temperatures from -40F to 428 F and pass tests covering everything from electrical properties to shrinkage to chemical resistance and accelerated life testing.

Product Features:
  • OE-Equivalent.
  • OEM style connectors for easy Installation.
  • Carbon fiberglass core for superior conductivity.
  • Fiberglass braiding for strength.
  • Conductive silicone layer for EMI/RFI noise suppression.
  • Silicone insulation for superior dielectric and heat performance.
  • Reinforced Kevlar core.
See More

Carquest Premium – Ignition Module (Part No.CBE1093)

Ignition Module

from

$284.99
CARQUEST Ignition Modules are built by an ignition systems manufacturer with expertise in the entire vehicle spark system.

Product Features:
  • CARQUEST Ignition Modules creates and refines the timing of the engine using various sensors and readings throughout the spark system in order to create an efficiently running engine.
  • CARQUEST Ignition Modules use current and voltage limiting circuitry in order to prevent the ignition coil from over voltage/current. Over voltages can allow for coils to create excessive heat which can damage to the ignition module resulting in check eng
  • CARQUEST Ignition Modules are 100% individually tested for all product functionalities including over voltage, timing and dwell.
See More

ACDelco – GM Original Equipment Ignition Control Module, Remanufactured (Part No.F6000419485ACD)

GM Original Equipment Ignition Control Module, Remanufactured

from

$242.83
An ACDelco GM Original Equipment Remanufactured Vehicle Control Module is a GM-recommended replacement for your vehicle’s original component. It regulates various parts of your vehicle’s engine. Remanufacturing the vehicle control module is an industry standard practice that involves disassembly of existing units, and replacing components that are most prone to wear and failure with new components. Damaged and obsolete parts are replaced and are 100% end of line tested to ensure they perform to ACDelco specifications. In addition, remanufacturing also benefits the environment by returning components back into service rather than processing as scrap or simply disposing of them. This original equipment vehicle control module is engineered to fit your specific GM vehicle and will provide the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Feature electronically welded lead connections to reduce heat stress failure or cold joints
  • Laser trimmed to provide precise values and reduce deterioration and damage
  • Increase voltage in order for the spark plugs to ignite the air/fuel mixture
  • Include a copper slug heat sink to help dissipate heat and create a more stable environment
  • Equipped with a large bus bar for added support and conductivity to address the installation and operating forces that stress terminal tabs
  • Undergo stringent testing, often under extreme or unusual conditions, to help deliver the quality parts you expect from ACDelco
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
See More

Carquest Premium – Ignition Module (Part No.CBG1014)

Ignition Module

from

$187.99
CARQUEST Ignition Modules are built by an ignition systems manufacturer with expertise in the entire vehicle spark system.

Product Features:
  • CARQUEST Ignition Modules creates and refines the timing of the engine using various sensors and readings throughout the spark system in order to create an efficiently running engine.
  • CARQUEST Ignition Modules use current and voltage limiting circuitry in order to prevent the ignition coil from over voltage/current. Over voltages can allow for coils to create excessive heat which can damage to the ignition module resulting in check eng
  • CARQUEST Ignition Modules are 100% individually tested for all product functionalities including over voltage, timing and dwell.
See More

Idemitsu – Power Steering Fluid – 12 oz (Part No.30102-052A)

Power Steering Fluid - 12 oz

from

$6.29
IDEMITSU Premium PSF is specifically engineered to meet the demanding performance requirements of Honda and Acura power steering units. This advanced technology fluid is formulated with premium quality base oils and the latest additive technologies to provide outstanding protection and performance under the most servere environmental and driving conditions.IDEMITSU Premium PSF can also be used in most Asian Original Equipment Manufacturer (OEM) power steering units that do not utilize electronic power steering technology.

Product Features:
  • Unique friction technology provides efficient and noise-free operation
  • Advanced formulation technology provides outstanding protection to the entire power steering system while delivering smooth performance under the most severe operating conditions
  • Superior low temperature performance for easy flow and protection against cavitation and elimination of “squawking” and “squealing”
  • Excellent compatibility with seals, gaskets and internal components to reduce the potential for leaks and ensures smooth performance over extended intervals
  • Robust anti-wear and inhibitor chemistry provides enhanced component and fluid durability and long-life
See More

ACDelco – Specific FitSpark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core (Part No.9764B)

Specific FitSpark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core

from

$46.99
ACDelco Professional Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are a high quality replacement for many vehicles on the road today. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plugs. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

ACDelco – Specific FitSpark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core (Part No.9744QQ)

Specific FitSpark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core

from

$57.99
ACDelco Professional Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are a high quality replacement for many vehicles on the road today. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plugs. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

NGK – Spark Plug Wire Set: Ultra-low Resistance Magnetic Core, Lifetime Warranty (Part No.51117)

Spark Plug Wire Set: Ultra-low Resistance Magnetic Core, Lifetime Warranty

from

$24.79
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding over premium ferrite magnetic core delivers ultra-low resistance, a more powerful spark and excellent EMI/RFI noise suppression. OE or better specified spark plug and distributor boots ensure the highest quality fit, performance and durability in every application. Spark plug boots are glued to NGK cable with a silicone sealer for a watertight seal. Stainless steel terminals utilizing up to 3 serrated crimps bite into cable jacket and inner insulation for the highest terminal retention strength (wherever possible). Locking C-shaped spring clip with corrosion-resistant plating ensures a secure and positive spark plug terminal connection.

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBA3809)

Ignition Knock (Detonation) Sensor

from

$51.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Knock Sensor (Part No.SBC3894)

Knock Sensor

from

$39.99
Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
  • Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBA4097)

Ignition Knock (Detonation) Sensor

from

$41.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Driveworks – Spark Plug Wire Set (Part No.9378)

Spark Plug Wire Set

from

$21.79
Driveworks wire sets are engineered according to OE specifications to assure the same true design, fit and quality of the OE wire.

Product Features:
  • 2 Year replacement on manufacturer defects
See More

NGK – NGK Wire Set (Part No.51160)

NGK Wire Set

from

$21.29
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

NGK – NGK Wire Set (Part No.51165)

NGK Wire Set

from

$22.79
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

1997 Saturn SW Series Ignition and Tune-Up Products

You count on your 1997 Saturn SW Series to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 53 Ignition and Tune-Up Products ranging in price from $2.99 to $242.83, you’re sure to find everything you need for your 1997 Saturn SW Series.

Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 14 different brands like NGK, Champion, and E3. 1997 Saturn SW Series Ignition and Tune-Up Products start as low as $2.99!

One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 1,920 extensive product reviews on 1997 Saturn SW Series Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are Platinum TT Spark Plug with Twin-Tip Design for Enhanced Ignition with 4.6 stars and Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, last 100K+ Miles, IK16TT with 4.8 stars.

Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 1997 Saturn SW Series below to get started!

Top-Rated Ignition and Tune-Up Products Brands For Your 1997 Saturn SW Series

Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1997 Saturn SW Series running right for years to come. In our inventory you’ll find brands like NGK, Champion, E3, and even more.

Popular NGK Ignition and Tune-Up Products

You’ll find popular NGK brand products across Spark Plugs. All are waiting to get your 1997 Saturn SW Series back on the road. Some of the top-rated NGK products in these categories are:

Top-Rated NGK Ignition and Tune-Up Products


If NGK are what you’re looking for, our inventory holds plenty. We stock NGK brand Ignition and Tune-Up Products for your 1997 Saturn SW Series, and some of our most reviewed NGK parts include:

FAQs for 1997 Saturn SW Series Ignition and Tune-Up Products

What are the most purchased Ignition and Tune-Up Products for the 1997 Saturn SW Series?

Out of 53 Ignition and Tune-Up Products for the 1997 Saturn SW Series, the most popular in our inventory are:
Champion Copper Plus- Single Card - RC12YC
from $4.99
(140)
Champion Copper Plus- Single Card – RC12YC
Spark Plugs

What are the top-rated 1997 Saturn SW Series Ignition and Tune-Up Products?

Top-rated Ignition and Tune-Up Products for your 1997 Saturn SW Series based on customer reviews/ratings are:
Platinum TT Spark Plug with Twin-Tip Design for Enhanced Ignition
from $3.99
(105)
Platinum TT Spark Plug with Twin-Tip Design for Enhanced Ignition
“Perfect fit! Excellent product.”
Iridium Power Spark Plug: Maximum Spark Energy, 0.4mm Iridium Tip, IK16
from $11.79
(40)
Iridium Power Spark Plug: Maximum Spark Energy, 0.4mm Iridium Tip, IK16
“Like the headline said, these are the ones that are supposed to be in my vehicle and they worked fine”