1997 Oldsmobile Cutlass Supreme Steering and Chassis Parts

Below you will find various in-demand Oldsmobile Steering and Chassis Parts, components and accessories for your 1997 Cutlass Supreme. Advance Auto Parts has popular Cutlass Supreme parts like Power Steering Parts, Tie Rods, Ball Joints and more. You’ll also find aftermarket and OEM Steering and Chassis Parts for other Cutlass Supreme model years including 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996 and more. Select a category of 1997 Oldsmobile Cutlass Supreme Steering and Chassis Parts below and start saving instantly.

Popular 1997 Oldsmobile Cutlass Supreme Steering and Chassis Parts Categories

Power Steering Coolers

Suspension Ball Joint Kits

Center Tie Rod Ends

Lower Ball Joints

Power Steering Pumps

Power Steering Filters

Tie Rod Ends

Front Alignment Kits

Power Steering Reservoir Caps

Power Steering Pump Pulleys

Subframe Bushings

Power Steering Pressure Hoses

Camber Kits

Power Steering Pressure Switches

Power Steering Pump Caps

Power Steering Pump Kits

Power Steering Reservoirs

Sway Bar Link Bushing Kits

Power Steering Return Hoses

Rack and Pinion Boots

Rack and Pinion Mounts

Sway Bar Bushings

Rack and Pinion Bushings

Rear Alignment Kits

Power Steering Pump Seal Kits

Chassis Wiring Harness Connectors

Rack and Pinion Rebuild Kits

Pump Shaft Seals

Alignment Camber Bolt Assortments

Essential Steering and Chassis Parts for 1997 Oldsmobile Cutlass Supremes

from

$29.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$88.99

This replacement power steering fluid reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is thoroughly tested to ensure optimum fit on specific vehicle applications.

Product Features:

Direct replacement – this power steering fluid reservoir fits and functions like original equipment for a trouble-free installation
Complete assembly – includes reservoir and reservoir cap
Reliable performance – built to withstand excessive heat and vibration
Quality tested – this part has undergone on-vehicle testing to ensure a quality fit and long service life

from

$27.99

Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

PREMIUM MATERIALS — Made from high-quality thermoplastic material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$64.99

Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$32.99

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element.
Patented built-in bypass that filters up to 190 micron particles.
Designed to extend the life of the steering system.
Sure-grip barb connections are included to ensure proper hose fitment.

from

$9.99

Camber Bolt Kit

from

$11.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial mounting kit system
For installation of transmission coolers and electric fans
Provides quick, effective installation of Imperial products
Contains nylon mounting rods, foam pads and locking buttons
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation

from

$10.49

PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$90.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.

from

$115.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$27.99

Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:

Forged housing from specific materials provides strength and durability to prevent breakage
Coated technology provides a smooth and durable surface to prevent corrosion and rust
Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
A slotted nut and cotter pin for a more secure installation

from

$59.99

This power steering pump pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications
Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$10.49

Rack/Pinion Bushing

from

$47.99

Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.

Product Features:

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Hex formed studs and/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)
Hardware included for easier installation (where applicable)

from

$438.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Can solve excessive tire wear and steering issues
Provides like-new steering, ease of installation and longer life
Can bring vehicles back to factory specification
Shims and bushings provide precise camber, caster and toe adjustments
Incorporates proven design and engineering features

from

$84.99

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100 percent new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100 percent tested and calibrated pressure relief valves.
Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$32.99

This suspension subframe bushing kit is designed to match the original hardware required to repair the subframe to restore ride control on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this suspension subframe bushing kit is designed to match the original hardware required to repair the subframe to restore ride control on specified vehicles
Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$39.99

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

from

$49.49

from

$49.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Improves vehicle handling
Restores OE alignment
Improves steering geometry
Easy camber adjustment

from

$22.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$24.29

Can bring vehicles back to factory specification
Can solve excessive tire wear and steering issues
Shims and bushings provide precise camber, caster and toe adjustments
Incorporates proven design and engineering features
Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles

from

$46.49

DESIGN CHANGE – New and improved follower ball joint design to extend product life and simplify installation
PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$45.49

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$96.99

Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$91.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Power Steering Pressure Switch monitors the hydraulic pressure in the power steering system, enhancing safety and performance by alerting the driver to potential issues such as low fluid levels or system malfunctions. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$6.49

This power steering reservoir cap is a direct replacement for a cracked, worn or missing original equipment cap to prevent fluid leaks and steering system contamination.

Product Features:

Ideal replacement – this power steering reservoir cap matches the fit, function and appearance of a damaged or missing original equipment cap
Durable construction – made of quality materials for leak-free performance and a long service life
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable performance

from

$14.29

This power steering reservoir cap is a direct replacement for a cracked, worn or missing original equipment cap to prevent fluid leaks and steering system contamination.

Product Features:

Ideal replacement – this power steering reservoir cap matches the fit, function and appearance of a damaged or missing original equipment cap
Durable construction – made of quality materials for leak-free performance and a long service life
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable performance

Upgrade your 1997 Oldsmobile Cutlass Supreme with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 1997 Oldsmobile Cutlass Supreme, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Oldsmobile or enhancing its overall performance, Steering and Chassis Parts are key to keeping your Cutlass Supreme functioning at its best. At Advance Auto Parts, we offer a wide selection of 88 Steering and Chassis Parts for the 1997 Oldsmobile Cutlass Supreme, designed to meet your needs without breaking the bank. From Power Steering Part replacements to Tie Rods upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 1997 Oldsmobile Cutlass Supreme at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $3.29 to $438.99, with an average price of $60.48. Our 88 Steering and Chassis Parts in stock come from 14 trusted brands, so you’re sure to find the right part for your 1997 Oldsmobile Cutlass Supreme without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1997 Oldsmobile Cutlass Supreme, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Moog, Carquest Premium, DriveWorks, and more. Moog Steering and Chassis Parts start at just $24.29 and boast an impressive 4.5 stars average rating from customers. Carquest Premium and DriveWorks also bring quality to the table, with Steering and Chassis Parts available starting at $8.49, and at an average 4.4 stars rating. With 846 customer reviews and counting, our 1997 Oldsmobile Cutlass Supreme Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1997 Oldsmobile Cutlass Supreme is always ready to roll. We’re committed to providing you with everything you need to keep your Cutlass Supreme in top shape, all in one place. Start shopping confidently below for your 1997 Oldsmobile Cutlass Supreme!

Best-Selling Power Steering Parts for 1997 Oldsmobile Cutlass Supremes

Enhance the driving experience in your Oldsmobile with 48 quality Power Steering Part components, starting at $3.29.

show more show less

from

$13.49

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$50.99

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$47.49

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$135.99

from

$11.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial mounting kit system
For installation of transmission coolers and electric fans
Provides quick, effective installation of Imperial products
Contains nylon mounting rods, foam pads and locking buttons
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation

from

$38.99

from

$98.99

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100 percent new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100 percent tested and calibrated pressure relief valves.
Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$32.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission oil cooler hose
11/32″ x 4-1/2′
Designed for transmission fluid applications
Made for tight-radius applications found in transmission cooler installations
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon

from

$32.99

In-line filter with serviceable filter element.
Patented built-in bypass that filters up to 190 micron particles.
Designed to extend the life of the steering system.
Sure-grip barb connections are included to ensure proper hose fitment.

from

$12.79

Driveworks Brand Bellow kits are made to OE specifications. They work with the steering tie rod end, preventing the entering of dust and prolonging the useful life of the inner parts. Driveworks Brand chassis parts help ensure improved steering response.

Product Features:

Designed to meet or exceeds OE performance specifications
Durable neoprene rubber

from

$28.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Power steering oil cooler
Size: 3/4″ x 2-1/2″ x 9″
For vehicles with 3/8″ I.D. power steering return hose
Removes destructive heat and prolongs power steering system life
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$11.49

Imperial transmission line fitting kits allow for the installation of auxiliary cooler lines without cutting the vehicle’s original metal lines.

Product Features:

Quick Connect coupler
Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
Simplifies transmission cooler installation
Allows for auxiliary transmission cooler installation without cutting OE lines

from

$55.99

Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications
Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$13.49

This power steering reservoir cap is a direct replacement for a cracked, worn or missing original equipment cap to prevent fluid leaks and steering system contamination.

Product Features:

Ideal replacement – this power steering reservoir cap matches the fit, function and appearance of a damaged or missing original equipment cap
Durable construction – made of quality materials for leak-free performance and a long service life
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable performance

from

$85.99

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100 percent new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100 percent tested and calibrated pressure relief valves.
Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$165.99

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100 percent new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100 percent tested and calibrated pressure relief valves.
Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$88.99

Direct replacement – this power steering fluid reservoir fits and functions like original equipment for a trouble-free installation
Complete assembly – includes reservoir and reservoir cap
Reliable performance – built to withstand excessive heat and vibration
Quality tested – this part has undergone on-vehicle testing to ensure a quality fit and long service life

from

$104.99

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100 percent new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100 percent tested and calibrated pressure relief valves.
Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$26.49

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$72.99

Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications
Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$81.99

CARDONE® Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original.

Product Features:

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.

from

$3.29

from

$35.49

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$47.99

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Hex formed studs and/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)
Hardware included for easier installation (where applicable)

Most Popular 1997 Oldsmobile Cutlass Supreme Tie Rods

Customize your Oldsmobile with 7 Tie Rods products like Tie Rod Ends and Center Tie Rod Ends, all priced under $45.99.

show more show less

from

$45.99

Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Assembled in the USA

from

$27.99

Forged housing from specific materials provides strength and durability to prevent breakage
Coated technology provides a smooth and durable surface to prevent corrosion and rust
Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
A slotted nut and cotter pin for a more secure installation

from

$30.99

When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:

Meets or exceeds OE performance specifications
Performance tested to ensure durability
Forged micro-alloy steel construction for strength and durability
A slotted nut and cotter pin for a more secure installation

from

$43.99

RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$45.99

Carquest Premium tie rods are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium tie rods utilize the same joint technology as the OE part, with either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. We feature a corrosion-resistant coating on all tie rods to reduce rust. Each part number in the Carquest Premium tie rod line is designed and built to deliver the quality that you demand.

Product Features:

Engineered for OE fit, form and function
Corrosion-resistant coating to reduce rust and extend service life
Hex formed studs and/or wrench flats for easier installation (where applicable)
Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
Inner tie rod ends are supplied with thread locking compound
Hardware included for easier installation (where applicable)

from

$38.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$30.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

Top Picks for 1997 Oldsmobile Cutlass Supreme Ball Joints

Upgrade Oldsmobile Cutlass Supremes with top-quality Ball Joints parts, including 3 OEM and aftermarket selections for your 1997 model.

show more show less

from

$47.49

PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$32.99

Driveworks Brand ball joints are made to meet OE specifications. They play a critical role in the safe operation of the vehicle by eliminating unstable front-end suspension. Driveworks Brand chassis parts ensure improved steering response and durability.

Product Features:

Meets or exceeds OE performance specifications
Premium Polychloroprene boot provides extended temperature range and better wear resistance
Test-proven stud material helps prevent premature stud failure
Provides premium gauge steel construction for strength and durability
Performance tested to ensure durability

from

$34.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

In-Demand Steering Shafts for 1997 Oldsmobile Cutlass Supremes

Select from 1 premium Steering Shafts parts for your 1997 Oldsmobile Cutlass Supreme.

show more show less

from

$22.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

Most Sold 1997 Oldsmobile Cutlass Supreme Sway Bars

Explore our best-selling Oldsmobile parts for the 1997 Cutlass Supreme among 17 OEM and aftermarket options starting from $8.29.

show more show less

from

$13.99

PREMIUM MATERIALS — Made from high-quality thermoplastic material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$22.99

PREMIUM MATERIALS — Made from high-quality thermoplastic material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$8.49

Sway Bar Bushing Kit

from

$27.99

PREMIUM MATERIALS — Made from high-quality thermoplastic material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$21.79

PREMIUM MATERIALS — Made from high-quality thermoplastic material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$8.29

Strut Rod Bushing

from

$10.49

Strut Rod Bushing Kit

from

$28.49

PREMIUM MATERIALS — Made from high-quality thermoplastic material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$25.49

PREMIUM MATERIALS — Made from high-quality thermoplastic material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$25.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$52.99

STABILIZER BUSHING

from

$38.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$30.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$18.49

This suspension stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$17.49

This suspension stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$16.99

This suspension stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$9.99

This suspension stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

Top-Rated Steering and Chassis Parts Brands For Your 1997 Oldsmobile Cutlass Supreme

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 1997 Oldsmobile Cutlass Supremes. Below you’ll find some of our best rated Steering and Chassis Parts from Moog, Carquest Premium, and DriveWorks, and more. Steering and Chassis Parts from these brands that fit a 1997 Cutlass Supreme start at just $8.49 and are rated as high as 4.5 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Moog 1997 Oldsmobile Cutlass Supreme Steering and Chassis Parts

When it comes to maintaining or upgrading your 1997 Oldsmobile Cutlass Supreme, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Moog ticks all of those boxes. We offer a wide selection of Moog Steering and Chassis Parts, specifically designed for the 1997 Oldsmobile Cutlass Supreme. With over 3 Moog brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $24.29, with an average price of just $39.26. Plus, with over 10 customer reviews and an average rating of 4.5 stars, you can trust that our Moog Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $24.29

(3)

Alignment Camber Kit

“Also use these bolts in the rear.”

from $47.49

(1)

Suspension Ball Joint

“Easy to install. Make sure you have grease gun as it has grease fitting. Other than that everything included”

from $45.99

(6)

Steering Tie Rod End

“Moog makes a superior product and it was very easy to install.”

Popular Carquest Premium 1997 Oldsmobile Cutlass Supreme Steering and Chassis Parts

Carquest Premium auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 1997 Oldsmobile Cutlass Supreme owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 1997 Cutlass Supreme, Advance Auto Parts carries a full inventory of 2 Carquest Premium Steering and Chassis Parts. Plus you will be keeping your Oldsmobile in peak condition while saving money because prices on these Carquest Premium Steering and Chassis Parts range from $38.99 to $135.99, plus, with more than 9 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.

from $135.99

(1)

Power Steering Return Hose Assembly, 16mm Male "O" Ring x 3/8" I.D. Hose

“replaced bad part exact fit”

from $38.99

(8)

3/8" I.D. Return Hose CPE

“Hose”

FAQs for 1997 Oldsmobile Cutlass Supreme Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 1997 Oldsmobile Cutlass Supremes?

Out of 88 Steering and Chassis Parts that fit 1997 Oldsmobile Cutlass Supremes, the following parts are the top sellers:

New Power Steering Filter (10417593) – $32.99
3/8" ID Return Hose (sold by each) (18070570) – $3.29
Tie Rod End (15530285) – $27.99

What’s the price range for 1997 Oldsmobile Cutlass Supreme Steering and Chassis Parts?

Steering and Chassis Part prices for the 1997 Oldsmobile Cutlass Supreme start at $3.29 and go up to $438.99 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 1997 Oldsmobile Cutlass Supreme?

The average price for Steering and Chassis Parts for the 1997 Oldsmobile Cutlass Supreme is $60.48. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other Oldsmobile Cutlass Supreme model years?

Yes, we currently carry Steering and Chassis Parts for 29 model years of Oldsmobile Cutlass Supremes between 1967 and 1996. Steering and Chassis Parts are bought most frequently for the following model years: 1996, 1995, 1994, 1993, 1992, 1991, 1990, 1989, and 1988.

What are the cheapest Steering and Chassis Parts for my 1997 Oldsmobile Cutlass Supreme?

The cheapest 1997 Oldsmobile Cutlass Supreme Steering and Chassis Parts we carry in stock are:

3/8" ID Return Hose (sold by each) (18070570) – $3.29
Power Steering Filter (50167394) – $7.99
Strut Rod Bushing (10640955) – $8.29
Sway Bar Bushing Kit (10577298) – $8.49
Camber Bolt Kit (10361666) – $9.99

What are the top-rated Steering and Chassis Parts that fit the 1997 Oldsmobile Cutlass Supreme?

Out of 846 reviews by customers, our 1997 Oldsmobile Cutlass Supreme Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 1997 Oldsmobile Cutlass Supreme and their top-rated products:

Tie Rods
- Steering Tie Rod End (20973407) – $45.99
- Steering Tie Rod End (15530185) – $30.99
- Tie Rod End (15530285) – $27.99

What types of Steering and Chassis Parts do you sell for my 1997 Oldsmobile Cutlass Supreme?

As of 11/2/25, these are some of the most in-demand types of Steering and Chassis Parts for a 1997 Oldsmobile Cutlass Supreme:

Can I get help with 1997 Oldsmobile Cutlass Supreme Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Oldsmobile Steering and Chassis Parts and more.

What is your return policy for Oldsmobile Cutlass Supreme Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new Oldsmobile Cutlass Supreme Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1997 Oldsmobile Cutlass Supreme Steering and Chassis Parts

Powercraft – Pump Complete Rebuild Kit (Part No.7910)

Dorman – Power Steering Reservoir (Part No.603-905)

MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K6453)

MOOG – Suspension Ball Joint (Part No.K6145T)

Cardone – New Power Steering Filter (Part No.20-0038F)

Driveworks – Camber Bolt Kit (Part No.DW-K90476)

Imperial – Mounting Kit System (Part No.226201)

MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K5227)

Carquest Premium – Multi-Use Connector (Part No.PTA2913)

Powercraft – Rack Pinion Seal Kit (Part No.8786)

Driveworks – Tie Rod End (Part No.DW-EV195)

Dorman – Power Steering Pump Pulley (Part No.300-123)

Driveworks – Rack/Pinion Bushing (Part No.DW-K6349B)

Carquest Premium – Rack/Pinion Boot Kit (Part No.250-71956)

MOOG – Alignment Camber Bolt Assortment (Part No.CAM1A)

Cardone – Remanufactured Power Steering Pump (Part No.20-7911)

Dorman – Subframe Bushing Kit (Part No.924-004)

Carquest Premium – 3/8" I.D. Return Hose J189 (Part No.36196)

Carquest Premium – Power Steering Pressure Hose Assembly, 16mm Male "O" Ring x 18mm Male "O" Ring (Part No.36749)

Rare Parts – Cam Bolt Kit (Part No.RP17386)

National – Multi-Purpose Seal (Part No.7013S)

MOOG – Alignment Camber Kit (Part No.K928)

MOOG – Suspension Ball Joint (Part No.K5108)

Powercraft – Pump Seal Kit (Part No.8754)

MOOG – Steering Tie Rod End (Part No.ES406R)

Carquest Premium – Power Steering Pressure Switch (Part No.PSA1022)

Dorman – Help – Power Steering Caps (Part No.82581)

Dorman – Help – Power Steering Cap (Part No.82573)

Powercraft – Pump Drive Shaft Seal Kit (Part No.8709)

Cardone – Power Steering Filter (Part No.20-0058F)

Cardone – Power Steering Filter (Part No.20-0012F)

Carquest Premium – Power Steering Return Hose Assembly, 16mm Male "O" Ring x 3/8" I.D. Hose (Part No.37136)

Imperial – Mounting Kit System (Part No.226201)

Carquest Premium – 3/8" I.D. Return Hose CPE (Part No.36219)

Cardone – Remanufactured Power Steering Pump (Part No.20-57888)

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Cardone – New Power Steering Filter (Part No.20-0038F)

Driveworks – Rack/Pinion Boot Kit (Part No.DW-K6298)

Imperial – Power Steering Oil Cooler (Part No.241009)

Imperial – Quick Connect Coupler (Part No.240250)

Dorman – Power Steering Pump Pulley (Part No.300-201)

Dorman – Help – Power Steering Cap (Part No.82574)

Cardone – Remanufactured Power Steering Pump (Part No.20-888)

Cardone – Remanufactured Power Steering Pump (Part No.20-57830VB)

Dorman – Power Steering Reservoir (Part No.603-905)

Cardone – Remanufactured Power Steering Pump (Part No.20-57830)

Powercraft – Pump Seal Kit (Part No.8624)

Dorman – Power Steering Pump Pulley (Part No.300-202)

Cardone – Remanufactured Power Steering Pump with Reservoir (Part No.20-57888F)

Carquest Premium – 3/8" ID Return Hose (sold by each) (Part No.34995)

Cardone – Power Steering Filter (Part No.20-P038F)

Carquest Premium – Rack/Pinion Boot Kit (Part No.250-71956)

MOOG – Steering Tie Rod End (Part No.EV195)

Driveworks – Tie Rod End (Part No.DW-EV195)

Driveworks – Steering Tie Rod End (Part No.DW-ES2912RL)

MOOG – Steering Tie Rod End (Part No.ES2912RL)

Carquest Premium – Tie Rod End (Part No.700-71349)

Rare Parts – Tie Rod End (Part No.RP27056)

Rare Parts – Tie Rod End (Part No.RP26954)

MOOG – Suspension Ball Joint (Part No.K5301)

Driveworks – Ball Joint (Part No.DW-K5301)

Rare Parts – Ball Joint (Part No.RP10530)

National – Multi-Purpose Seal (Part No.7013S)

MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K5288)

MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K6457)

Driveworks – Sway Bar Bushing Kit (Part No.DW-K6641B)

MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K6453)

MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K5248)

Driveworks – Strut Rod Bushing (Part No.DW-K6455B)

Driveworks – Strut Rod Bushing Kit (Part No.DW-K6451B)

MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K6451)

MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K6459)

Rare Parts – Sway Bar Bushing (Part No.RP15882)

Rare Parts – STABILIZER BUSHING (Part No.RP17952)

Rare Parts – Sway Bar Bushing (Part No.RP17527)

Rare Parts – Sway Bar End Bushing (Part No.RP19051)

Dorman – Suspension Stabilizer Bar Bushing Kit (Part No.533-466)

Dorman – Suspension Stabilizer Bar Bushing Kit (Part No.533-468)

Dorman – Suspension Stabilizer Bar Bushing Kit (Part No.533-467)