1997 Nissan Sentra Clutch Systems

Essential 1997 Nissan Sentra Clutch Systems

LuK – OE Quality Flywheel (Part No.LFW165)

OE Quality Flywheel

from

$74.99
Flywheels Are Engineered & Manufactured To OE Specifications.Manufactured From Premium Grade Materials For Superior-Quality Friction Surface & Excellent Heat-Absorption Capacity.
See More

LuK – OE Quality Dual Mass Flywheel (Part No.DMF040)

OE Quality Dual Mass Flywheel

from

$385.99
LuK: Don’t gamble – stay with the original LuK DMF! The LuK DMF prevents damages solid flywheels may cause. The LUK Dual Mass Flywheel (DMF) is individually fine-tuned for every type of car. The risks of using solid flywheels are numerous – from increased wear of engine mounts through gearbox failure to damaged crankshafts.
See More

LUK – Dual Mass Flywheel (DMF) (Part No.I1000835630LUK)

Dual Mass Flywheel (DMF)

from

$445.89
LuK dual-mass flywheels absorb engine vibrations before they are transmitted to the driveline where they can create gear rattle. These units feature a built-in damper designed to isolate engine torque spikes and prevent transmission damage. By design, dual-mass flywheels cannot be resurfaced. This all makes the LuK dual mass flywheel the ideal solution. With one drawback: the higher the mass reactance of the vibrating masses, the more excessive the resonance increase and associated torque peaks. With the dual mass flywheel, this would be easily perceived when starting and stopping the engine; much more easily than with a conventional clutch system. Additionally: the smaller flymass of the engine has less of a stabilizing effect on the speed fluctuation of the engine. Thanks to decades of experience in clutch building, the LuK specialists were able to find an excellent solution to this problem. An additional damping device effectively prevents resonance overload. In normal operation, however, this additional damping device has no function and the torsional vibrations of the engine are filtered out by spring dampers. Friction and spring rate – the correct ratio is important. For optimal vibration isolation and soft resonance passage when starting and stopping the engine, the ratio between friction and spring rate must be optimal. The length of the springs is a key factor: The softer a spring, the more efficiently vibrations are isolated. The extra-long springs of the latest generation of dual mass flywheels significantly reduce the spring rate compared to a first generation dual mass flywheel. In routine driving operations, excessive resonance increases are kept almost completely away from the gearbox.

Product Features:
  • Top driving comfort
  • Absorbs vibrations
  • Prevents noise
  • Enables comfortable, low-revs driving
  • Saves fuel
  • Relieves crankshaft and gearbox
See More

LuK – OE Quality Flywheel (Part No.LFW172)

OE Quality Flywheel

from

$64.99
LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.
See More

Sachs – Sachs Flywheel (Part No.I1000326946SAC)

Sachs Flywheel

from

$119.42
Sachs Flywheels are made from high quality steel forging and are designed to meet or exceed the manufacturers specifications for quality and performance.

Product Features:
  • OE quality and direct fit application
  • Made from high quality steel
  • Designed to reduce clutch chatter and vibration
  • Dynamically balanced
See More

ATP – Clutch Cable (Part No.Y-581)

Clutch Cable

from

$38.99
Clutch cables connect the clutch pedal to the transmission shift fork. Old cables can bind, break, or just become sluggish. The best repair is to replace the old cable with a new one. ATP Clutch cables are designed to fit and function just like the original part to ensure durability and long life.

Product Features:
  • Includes brackets, grommets, etc to match original
  • Returns clutch petal feel to normal
  • Allows proper clutch engagement
See More

ATP – Clutch Cable (Part No.Y-580)

Clutch Cable

from

$24.99
Clutch cables connect the clutch pedal to the transmission shift fork. Old cables can bind, break, or just become sluggish. The best repair is to replace the old cable with a new one. ATP Clutch cables are designed to fit and function just like the original part to ensure durability and long life.

Product Features:
  • Includes brackets, grommets, etc to match original
  • Returns clutch petal feel to normal
  • Allows proper clutch engagement
See More

ATP – Clutch Cable (Part No.Y-349)

Clutch Cable

from

$26.99
Clutch cables connect the clutch pedal to the transmission shift fork. Old cables can bind, break, or just become sluggish. The best repair is to replace the old cable with a new one. ATP Clutch cables are designed to fit and function just like the original part to ensure durability and long life.

Product Features:
  • Includes brackets, grommets, etc to match original
  • Returns clutch petal feel to normal
  • Allows proper clutch engagement
See More

TSK – Clutch Cable (Part No.I402087543TSK)

Clutch Cable

from

$27.43
The TSK Clutch Cable is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

TSK – Clutch Cable (Part No.I4020101284TSK)

Clutch Cable

from

$29.44
The TSK Clutch Cable is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Dorman – Clutch Pilot Bushing (Part No.690-004.1)

Clutch Pilot Bushing

from

$2.99
This clutch pilot bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this clutch pilot bushing matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Driveworks – Clutch Release Bearing (Part No.S-PB-22)

Clutch Release Bearing

from

$1.99
Product Features:
  • Brand may vary by location
See More

National – Bearings (Part No.PB-22)

Bearings

from

$3.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel and bronze for outstanding durability and performance
  • Oil impregnated for extended life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Dorman – Clutch Pilot Bushing .629 In. x .816 In. Type A, Length .689 In. (sold by each) (Part No.690-004)

Clutch Pilot Bushing .629 In. x .816 In. Type A, Length .689 In. (sold by each)

from

$2.99
This clutch pilot bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this clutch pilot bushing matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

LuK – Clutch Kit: 8 7/8" Disc Diameter, 15/16" Input Shaft Diameter, 21 Tooth Spline (Part No.06-086)

Clutch Kit: 8 7/8" Disc Diameter, 15/16" Input Shaft Diameter, 21 Tooth Spline

from

$285.99
Voted #1 recommended Clutch products by installers since 2015. Luk, a Schaeffler brand pioneered the way from the conventional and self-adjusting clutch to the innovative double clutch. We carry a comprehensive product portfolio of complete clutch sets, pressure plates, discs, flywheels, slave and master cylinders and release bearings, The Luk product range also includes a large number of available single components, dampers and absorbers and hydraulic clutch lines.

Product Features:
  • Application matched for OE form, fit, and function
  • Manufactured with high-quality materials, using cutting edge technology and processes
  • Stock photo – Actual parts and materials may vary.
See More

LuK – LuK Original Equipment Quality Replacement CLUTCH KIT (Part No.06-040)

LuK Original Equipment Quality Replacement CLUTCH KIT

from

$105.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:
  • Application matched for OE form, fit, and function
  • Manufactured with high-quality materials, using cutting edge technology and processes
  • Stock photo – Actual parts and materials may vary.
See More

LuK – Clutch Kit: 7 1/16" Disc Diameter, 13/16" Input Shaft Diameter, 18 Tooth Spline (Part No.06-021)

Clutch Kit: 7 1/16" Disc Diameter, 13/16" Input Shaft Diameter, 18 Tooth Spline

from

$111.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:
  • Application matched for OE form, fit, and function
  • Manufactured with high-quality materials, using cutting edge technology and processes
  • Stock photo – Actual parts and materials may vary.
See More

LuK – Clutch Kit: 9 7/16" Disc Diameter, 15/16" Input Shaft Diameter, 21 Tooth Spline (Part No.06-084)

Clutch Kit: 9 7/16" Disc Diameter, 15/16" Input Shaft Diameter, 21 Tooth Spline

from

$602.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:
  • Application matched for OE form, fit, and function
  • Manufactured with high-quality materials, using cutting edge technology and processes
  • Stock photo – Actual parts and materials may vary.
See More

LuK – Clutch Kit: 9 7/16" Disc Diameter, 1" Input Shaft Diameter, 24 Tooth Spline (Part No.06-071)

Clutch Kit: 9 7/16" Disc Diameter, 1" Input Shaft Diameter, 24 Tooth Spline

from

$233.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:
  • Application matched for OE form, fit, and function
  • Manufactured with high-quality materials, using cutting edge technology and processes
  • Stock photo – Actual parts and materials may vary.
See More

LuK – LuK Original Equipment Quality Replacement CLUTCH KIT (Part No.06-057)

LuK Original Equipment Quality Replacement CLUTCH KIT

from

$239.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:
  • Application matched for OE form, fit, and function
  • Manufactured with high-quality materials, using cutting edge technology and processes
  • Stock photo – Actual parts and materials may vary.
See More

ATP – FLYWHEEL SHIM (Part No.NS-2)

FLYWHEEL SHIM

from

$18.99
FLYWHEEL SHIM

1997 Nissan Sentra Clutch Systems

You count on your 1997 Nissan Sentra to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Clutch Systems. With 8 Clutch Systems ranging in price from $1.99 to $119.42, you’re sure to find everything you need for your 1997 Nissan Sentra.

Brands matter. If you want to shop a specific Clutch Systems brand, we stock 7 different brands like National, ATP, and Driveworks. 1997 Nissan Sentra Clutch Systems start as low as $1.99!

Did we mention you can order your Clutch Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Clutch Systems inventory for your 1997 Nissan Sentra below to get started!

FAQs for 1997 Nissan Sentra Clutch Systems

What are the most purchased Clutch Systems for the 1997 Nissan Sentra?

Out of 8 Clutch Systems for the 1997 Nissan Sentra, the most popular in our inventory are:
Bearings
from $3.29
This product is not rated
Bearings
Clutch Pilot Bushings
Clutch Cable
from $24.99
This product is not rated
Clutch Cable
Clutch Cables
Clutch Release Bearing
from $1.99
This product is not rated
Clutch Release Bearing
Clutch Pilot Bushings