1997 Lincoln Mark VIII Fuel and Emissions Systems
More 1997 Lincoln Mark VIII Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 1997 Lincoln Mark VIII, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 1997 Lincoln Mark VIII Fuel and Emissions Systems
Carquest Premium – Fuel Injector Seal Kit (Part No.AS055)
DENSO – Original Equipment Quality Electric Fuel Pump (Part No.951-0009)
from
$204.99
As the innovator and leader in fuel supply technology, DENSO has conducted superior testing and inspection processes to insure the highest quality fuel supply product. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the b
Product Features:
See More
Product Features:
- First Time Fit
- Built to DENSO Original Equipment Standards
Carquest Premium – Vapor Canister Purge Solenoid (Part No.CPC1134)
from
$94.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Santech – EGR Valve Position S (Part No.B7006175517SII)
from
$49.90
EGR Valve Position S
DENSO – Oxygen Sensor: 4 Wire, 11.77" Long, Heated, Universal Fit (Part No.234-4210)
from
$80.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity; DENSO gives you the right part and the right fit, the first time.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Accel – Performance Fuel Injector, 24lb, 8-pack (Part No.150824)
from
$420.99
Excellent atomization of fuel. Improved fuel economy and throttle response. Help with problem carbon build up.
Product Features:
See More
Product Features:
- New Quieter Design Outflows The Competition
- Tested For Guaranteed performance And Reliability
- 3/8 in. NPT Inlet/Outlet For Easy Installation
- Universal Fit – Includes Mounting Bracket
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61042)
from
$1.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Delphi – EGR Valve Position Sensor (Part No.TS10163)
from
$96.99
Delphi temperature sensors are built with the latest OE technology; Delphi temperature sensors use durable, one-piece design; Delphi temperature sensors are impervious to electrical noise and interference.
Product Features:
See More
Product Features:
- Delphi temperature sensors are built with the latest OE technology
- Delphi temperature sensors use durable, one-piece design
- Delphi temperature sensors are impervious to electrical noise and interference
- Delphi’s OE line of EGR valves provides accurate exhaust flow and emission control
- All parts used in the manufacture process are Delphi validated, tested and matched to the vehicle application, and manufactured in a Delphi ISO certified facility
- Available in port, back pressure, and linear configurations to cover many engine applications
Carquest Premium – Multi Purpose Relay (Part No.RAC1293)
from
$171.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Mahle – Idle Control Valve Gasket (Part No.C4063195530MAH)
from
$4.07
The Mahle Idle Control Valve Gasket is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Original equipment design and quality
- Utilizes OE equivalent or better materials
- Meets or exceeds OEM specifications
Carquest Premium – Vapor Canister Vent Solenoid (Part No.CPC2103)
from
$89.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Exhaust Gas Recirculation (EGR) Pressure Feedback Hose (Part No.MAC1935)
from
$11.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Wells Vehicle Electronics – Fuel Injection Pressure Regulator (Part No.5G1131)
from
$59.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to
See More
Bosch – Bosch Oxygen Sensor (Part No.C501091453BOS)
from
$49.42
The Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- OE Style connectors and wire lengths.
- Base ceramic probe of Zirconium and Yttrium.
- Patented Platinum Power Grid.
Carquest – Fuel Injector Seal Kit (Part No.274838)
from
$8.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- High-quality materials withstand extreme conditions
- Undergoes extensive testing to ensure reliability
- As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process
Motorcraft – REGULATOR-WINDW (Part No.WPT-359)
from
$63.99
REGULATOR-WINDW
Dorman – Help – Idle Air Valve Gaskets (Part No.90102)
from
$4.79
This fuel injection idle air control valve gasket is designed to match the fit and function of the original gasket on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this fuel injection idle air control valve gasket is designed to match the fit and function of the original gasket on specified vehicles
- Restores functionality – this gasket is made to fit and fully restore part functionality after the original gasket fails
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Coolant Temperature Sensor with Thread Sealant (Part No.WTC1015)
from
$24.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Dorman – Fuel Filler Neck Grommet (Part No.577-502)
from
$28.99
This fuel filler neck seal is designed to match the fit and function of the original seal on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this fuel filler neck seal is designed to match the fit and function of the original seal on specified vehicles
- Restores functionality – this seal is made to fit and fully restore part functionality after the original seal fails
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Delphi – Fuel Injection Pressure Regulator (Part No.FP10049)
from
$75.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
- Quiet operation, no audible regulator noise
- Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
- Consistent and predictable fuel pressure throughout system range of control provides great drivability
Carquest Premium – Fuel Cap Tester Adapter (Part No.12419)
from
$36.49
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.
Product Features:
See More
Product Features:
- BAR Certified adapters
- Adapter check’s a fuel cap’s ability to hold pressure.
- Adapters meet EPA standards for recommended fleet coverage.
- Check adapter application chart for specific makes and models
Carquest Premium – Exhaust Gas Recirculation (EGR) Pressure Feedback Sensor Connector (Part No.PTA1191)
from
$32.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – Exhaust Gas Recirculation (EGR) Valve (Part No.EGC1054)
from
$53.99
The EGR system is an emission control device designed to recirculate exhaust gas into the engines air intake system and back to the combustion chamber to control nitrogen oxides or NOx. The chemical NOx is created when oxygen and nitrogen are heated above 2,800-degree F. Exhaust gas, or gas that is displaced from the combustion chamber, contains little to no oxygen molecules. By recirculating this gas back into the combustion chamber fewer oxygen molecules are available for the combustion event which will therefore create a cooler combustion event. The EGR valve can be actuated by engine vacuum or electronically by the engine control module.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Our EGR valves are designed to match the vehicle specific exhaust gas flow rate as designed by the engine manufacturer to provide clean tail pipe emissions.
- Feedback EGR valves and pressure sensors contain a robust circuit board design which increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- Where applicable stainless-steel sleeves used over cold rolled sleeves providing smooth EGR pintle operation under all operating conditions.
Hitachi – Idle Air Control Valve New Actual OE Part (Part No.ABV0015)
from
$66.99
Hitachi’s Air Bypass Valves (ABVs) is designed to accurately regulate the amount of air entering the engine when at idle (also known as an Idle Speed Control (ISC) Valve and Idle Air Control (IAC) Valve). High quality materials ensure that even under the most extreme conditions, Hitachi’s ABVs will not deform or malfunction. Our ABVs are 100% air flow tested for ideal performance and are calibrated for each application ensuring your vehicle meets the strict emission standards set by the OE manufacturer which makes Hitachi’s ABVs the premium choice. The Hitachi designed air bypass valves have precise response time and flexible flow capability to maintain constant system pressure. They create a safer driving experience by suppressing backfire during deceleration and virtually eliminating the chance of hydro-lock. Hitachi is a Tier One OE supplier to the largest automobile manufacturers globally, delivery industry leading quality, and exceeding customer expectations with our products and service. Hitachi is bringing that same knowledge and expertise to the premium products we deliver in the Aftermarket because Quality Matters.
Product Features:
See More
Product Features:
- 100% air flow tested for ideal performance
- 100% NEW, never remanufactured
- Hitachi is a Tier 1 OE supplier for air bypass valves
- Meets the OE performance and durability standards for this application
- O-Ring/Gasket included when applicable
- Precision machined moving components and contact surfaces with a durable cast aluminum body
- Restores original drivability characteristics
- Quick response Time; Flexible flow capability and low current draw.
Carquest Premium – Fuel Tank Pressure Sensor (Part No.ECC1013)
from
$80.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Delphi – Fuel Pump Strainer (Part No.FS0115)
from
$28.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Filtration performance and micron rating meet or exceed OE requirements
- OE replacement strainer designed for use with Delphi electric fuel pumps
- Replacing the strainer is always recommended when replacing a fuel pump
Dorman – 5/16 In. Quick Connector, Straight w/ 18 In. of 3/8 In. Nylon Tube and a Union (Part No.800-054)
from
$26.49
Replace only the damaged connectors instead of the entire fuel line with these direct-replacement fuel line connectors. Designed for easy installation and a precise fit, they are engineered to withstand extreme underhood conditions.
Product Features:
See More
Product Features:
- Direct replacement – these fuel line connectors fit and function like the vehicle’s original equipment connectors for reliable, leak-free performance
- Quality construction – manufactured from premium materials for a long service life
- Saves money – replace only the part, not the entire assembly
- Excellent value – original equipment quality at a lower price
Dorman – SPRINGLOCK FUEL LINE CONNECTOR- 14mm x 5/16In. BARBED MALE (Part No.800-131)
from
$14.29
Replace only the damaged connectors instead of the entire fuel line with these direct-replacement fuel line connectors. Designed for easy installation and a precise fit, they are engineered to withstand extreme underhood conditions.
Product Features:
See More
Product Features:
- Direct replacement – these fuel line connectors fit and function like the vehicle’s original equipment connectors for reliable, leak-free performance
- Quality construction – manufactured from premium materials for a long service life
- Saves money – replace only the part, not the entire assembly
- Excellent value – original equipment quality at a lower price
Popular 1997 Lincoln Mark VIII Fuel and Emissions Systems Categories
1997 Lincoln Mark VIII Fuel and Emissions Systems
You count on your 1997 Lincoln Mark VIII to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 94 Fuel and Emissions Systems ranging in price from $1.99 to $512.99, you’re sure to find everything you need for your 1997 Lincoln Mark VIII.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 22 different brands like Motorcraft, Bosch, and Felpro. 1997 Lincoln Mark VIII Fuel and Emissions Systems start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 950 extensive product reviews on 1997 Lincoln Mark VIII Fuel and Emissions Systems. Some of the top-rated Fuel and Emissions Systems products we carry are Fuel Cap: 10832, Round, Direct Fit, Provides Tight Seal, 1 Pack with 4.0 stars and EGR/EXHAUST AIR SUPPLY GASKET with 4.8 stars.
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 1997 Lincoln Mark VIII below to get started!
Top-Rated Fuel and Emissions Systems Brands For Your 1997 Lincoln Mark VIII
Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1997 Lincoln Mark VIII running right for years to come. In our inventory you’ll find brands like Motorcraft, Bosch, Felpro, and even more.
Popular Carquest Fuel and Emissions Systems
You’ll find popular Carquest brand products across Fuel Injectors. All are waiting to get your 1997 Lincoln Mark VIII back on the road. Some of the top-rated Carquest products in these categories are:
Top-Rated Bosch Fuel and Emissions Systems
If Bosch are what you’re looking for, our inventory holds plenty. We stock Bosch brand Fuel and Emissions Systems for your 1997 Lincoln Mark VIII, and some of our most reviewed Bosch parts include:
FAQs for 1997 Lincoln Mark VIII Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 1997 Lincoln Mark VIII?
Out of 94 Fuel and Emissions Systems for the 1997 Lincoln Mark VIII, the most popular in our inventory are:
What are the top-rated 1997 Lincoln Mark VIII Fuel and Emissions Systems?
Top-rated Fuel and Emissions Systems for your 1997 Lincoln Mark VIII based on customer reviews/ratings are:
from
$33.49
(34)
Locking Fuel Cap: 10502, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack
“none…it’s a gas cap!”
