1997 Lexus ES300 Fuel and Emissions Systems
More 1997 Lexus ES300 Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 1997 Lexus ES300, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 1997 Lexus ES300 Fuel and Emissions Systems
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Carquest Premium – Fuel Cap Tester Adapter (Part No.12422)
from
$39.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.
Product Features:
See More
Product Features:
- BAR Certified adapters
- Adapter check’s a fuel cap’s ability to hold pressure.
- Adapters meet EPA standards for recommended fleet coverage.
- Check adapter application chart for specific makes and models
Carquest – A/C Compressor Clutch Relay (Part No.R3130)
from
$40.99
Product Features:
See More
- Our units are all pre-aligned & pre-adjusted to save installation time and ensure proper switching.
- A lubricated felt pad that lubricates the cam lobes on the vehicles distributor. This reduces wear on the point set rubbing block, extending the usable life of the part.
- Ventilated where available, tungsten contacts, which run cooler and exhibit less erosion.
- The copper-alloy shunt provides superior resistance to breakage, due to the flexing of the moving arm on the point set. It also significantly increases current conductivity over typical steel, shunts.
Delphi – Fuel Injection Pressure Regulator (Part No.FP10404)
from
$98.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
- Quiet operation, no audible regulator noise
- Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
- Consistent and predictable fuel pressure throughout system range of control provides great drivability
Carquest – HVAC Blower Motor Relay (Part No.R3137)
from
$26.05
The Intermotor brand has built its reputation by engineering and distributing a full line of genuine import parts – parts that are unrivaled for quality, original look, fit, form & function, as well as coverage.
Product Features:
See More
Product Features:
- Points feature one-piece nylon breaker arms where specified providing longer tune-up life
- Featuring brass or copper contacts where specified for extended wear
- All parts are manufactured to stringent quality requirements. Our plants are TS16949 and ISO9001 certified which ensures that every part is the right part for the right vehicle.
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Aisan – Idle Control Valve (Part No.C4030150369AIS)
from
$172.22
The Aisan Idle Control Valve is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Corrosion resistant housing material
- Premium materials for longer service life
- Meets or exceeds OEM specifications
Carquest Premium – Electric Fuel Pump Inertia Switch (Part No.SBA4426)
from
$84.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Spectra Premium – Fuel Filler Neck (Part No.FN992)
from
$145.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank filler necks meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
- Unit is dual coated for enhanced corrosion protection
- Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
- Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
- Tested with OE fuel cap to prevent evaporative emission and check engine light failure
Dorman – Exhaust Gas Recirculation Modulator (Part No.911-609)
from
$47.99
This EGR vacuum modulator is designed to match the fit and function of the original modulator on specified applications, and is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this EGR transducer is designed to match the fit and function of the original modulator on specified application
- Restores functionality – reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Fuel Pump Lock Ring (Part No.579-112)
from
$9.99
Recommended for replacement whenever the sending unit is serviced, this fuel tank sending unit lock ring securely retains the fuel pump assembly to the lock. Made of durable materials for reliable service.
Product Features:
See More
Product Features:
- Direct replacement – this fuel tank sending unit lock ring is made to match the fit and performance of the original ring on specific vehicle applications
- Recommended for replacement whenever the sending unit is serviced, this fuel tank sending unit lock ring securely retains the fuel pump assembly to the lock
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Spectra Premium – Fuel Tank Strap (Part No.ST303)
from
$76.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank straps meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Unit is designed to OE fit, form and function requirements accomplished by leveraging our expertise
- Direct fit ensures safe, secure fuel tank installation
- Product individually packaged and labeled to help reduce product damage prior to installation
- Industry leading coverage on straps for plastic tanks
Carquest Premium – Fuel Cap: 10825, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10825)
from
$14.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Mark Automotive – Fuel Tank Cap Seal (Part No.E206089586MAM)
from
$24.84
Fuel Tank Cap Seal
Spectra Premium – Fuel Pump Tank Seal (Part No.LO112)
from
$8.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel pump seals meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Designed to OE fit, form and function
- Application specific design ensure a perfect fit guarantee
- OEM design ensures corrosion resistance and prevents leakage
- Manufactured with high quality material, ensuring the durability of this part to prevent costly leaks
- Rigorous ISO quality control process
Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.EVA1022)
from
$1.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
AISIN – Vacuum Valve (Part No.B2024321921ASC)
from
$135.72
Vacuum Valve
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61091)
from
$6.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Delphi – Mass Air Flow Sensor (Part No.AF10603)
from
$125.99
100% new; Delphi OE Technology Validated to match the vehicle applications; Manufactured to meet or exceed OE requirements.
Product Features:
See More
Product Features:
- Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
- Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
- Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
- All parts are calibrated and tested to match the OE part
- Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube
- Delphi OE technology validated to match the vehicle applications
Carquest – Fuel Injector (Part No.57849)
from
$138.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- Precision-wound and precision-trimmed solenoid windings allow the computer to command efficient delivery of fuel
- High-temp Viton® O-rings enable prolonged sealing of injector under extreme heat conditions
- Fiber-optic yttrium aluminum garnet “YAG” laser welding and 100 million cycle testing ensure quality in every box
Victor Reinz – Fuel Injector O-Ring Kit (Part No.15-11974-01)
from
$7.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Ishino – Fuel Injector O-Ring (Part No.C1012184276ISH)
from
$1.74
Fuel Injector O-Ring
Carquest – Fuel Injector Connector (Part No.PT2318)
from
$4.29
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
- Offering thousands of high-quality pigtails & sockets for nearly every electrical job
Bosch – Oxygen Sensor: 4 Wire, 14.57" Long, Heated, Exact Fit (Part No.13355)
from
$104.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation advancements. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance. Bosch oxygen sensors deliver exceptional OE level reliability, performance and durability, further improving service life of the product.
Product Features:
See More
Product Features:
- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Direct Fit includes OE Connector for easy installation
- Performance meets or exceeds OE specifications
- True Direct-fit OE connectors and harness
Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Position Sensor (Part No.EGC1137)
from
$44.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
MAHLE Original – Injector O-Rings (Part No.GS33654)
from
$7.49
MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.
Product Features:
See More
Product Features:
- All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
- MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
- MAHLE gaskets is the leader in Domestic, Asian and European applications
- The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
Carquest Premium – Vapor Canister Purge Solenoid (Part No.CPC1536)
from
$64.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Vapor Canister Purge Solenoid (Part No.CPA1351)
from
$163.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Vapor Canister Purge Solenoid (Part No.CPA1081)
from
$59.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Popular 1997 Lexus ES300 Fuel and Emissions Systems Categories
1997 Lexus ES300 Fuel and Emissions Systems
You count on your 1997 Lexus ES300 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 82 Fuel and Emissions Systems ranging in price from $1.74 to $291.03, you’re sure to find everything you need for your 1997 Lexus ES300.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 23 different brands like Bosch, Carquest Premium, and Delphi. 1997 Lexus ES300 Fuel and Emissions Systems start as low as $1.74!
One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 641 extensive product reviews on 1997 Lexus ES300 Fuel and Emissions Systems. Some of the top-rated Fuel and Emissions Systems products we carry are Locking Fuel Cap: 10595, Screw On, Direct Fit, Provides Tight Seal, 1 Pack with 4.5 stars and Oxygen Sensor: 4 Wire, 14.57" Long, Heated, Exact Fit with 3.8 stars.
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 1997 Lexus ES300 below to get started!
Top-Rated Fuel and Emissions Systems Brands For Your 1997 Lexus ES300
Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1997 Lexus ES300 running right for years to come. In our inventory you’ll find brands like Bosch, Carquest Premium, Delphi, and even more.
Popular Cardone Fuel and Emissions Systems
You’ll find popular Cardone brand products across Fuel Injectors. All are waiting to get your 1997 Lexus ES300 back on the road. Some of the top-rated Cardone products in these categories are:
Top-Rated DENSO Fuel and Emissions Systems
If DENSO are what you’re looking for, our inventory holds plenty. We stock DENSO brand Fuel and Emissions Systems for your 1997 Lexus ES300, and some of our most reviewed DENSO parts include:
FAQs for 1997 Lexus ES300 Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 1997 Lexus ES300?
Out of 82 Fuel and Emissions Systems for the 1997 Lexus ES300, the most popular in our inventory are:
What are the top-rated 1997 Lexus ES300 Fuel and Emissions Systems?
Top-rated Fuel and Emissions Systems for your 1997 Lexus ES300 based on customer reviews/ratings are:
from
$21.99
(16)
Locking Fuel Cap: 10595, Screw On, Direct Fit, Provides Tight Seal, 1 Pack
“Locking Gas Cap works great!”
from
$104.99
(15)
Oxygen Sensor: 4 Wire, 14.57" Long, Heated, Exact Fit
“I actually installed two oxygen sensors in my 6 cyl Toyota. One was on the backside manifold near the firewall and difficult to get to, but installed”
from
$113.82
(15)
Bosch Oxygen Sensor
“I had the check engine light on my dash and diagnosed it as code p0155 and sensor bank2 sensor1 defective.
Used this part to fix the issue. now it h”
