1997 Jeep Wrangler Body Parts

Below you will find various in-demand Jeep Body Parts, components and accessories for your 1997 Wrangler. Advance Auto Parts has popular Wrangler parts like Truck Beds, Vehicle Doors, Vehicle Latches and Handles and more. You’ll also find aftermarket and OEM Body Parts for other Wrangler model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 1997 Jeep Wrangler Body Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1997 Jeep Wrangler Body Parts Categories

Body Mounts

Lift Supports

Rear Bumpers

Spare Tire Carrier Mounts

Side Bars and Sideskirts

Windshield and Hardware

Bumper Face Bars

Fender Molding Retainers

Hood Latches

Hood Latch Assemblies

Window Latches

Tailgates

Door Lock Clips

Exterior Door Handles

Interior Door Handles

Splash Guard (Mud Flap)

Body Mount Bushing Assemblies

Windshield Frame Weatherstrip Seals

Custom Mirrors

Front Bumpers

Interior Rear View Mirrors

Convertible Top Relays

Window Handles

Soft Top Wind Screens

Windshield Hinge Screws

Door Footman Loops

Mirror Replacement Glass

Door Jamb Switches

Door Window Belt Weather Strips

Body A-Pillar Trim Panel Plugs

Fender Flare Hardware Kits

Hood Prop Rod Clips

Bumper Extensions

Exterior Trim Fasteners

Trunk Open Warning Switches

Floor Supports

Door Hinge Locks

Door Jamb Switch Connector

Door Lock Cylinder Clip

Door Panel Clip Grommets

Fender Flare Extensions

Body Mount Brackets

Door Seal Kits

Body To Frame Mounting Bolt Kit

Body Corner Guards

Tire Covers

Hood Locks

Windshield Tie Down Bar

Door Lock Cylinder Bracket

Essential Body Parts for 1997 Jeep Wranglers

from

$129.99

New Economy Replacement Front Bumper Face Bar, Black

Product Features:

Black, Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$59.99

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy Installation

from

$20.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy Installation

from

$749.99

Is your Jeep’s hood rusty or dented? Omix-ADA offers high-quality replacements that will restore the original look to your Jeep. Why try to fix your old hood when you can start with a new one?

Product Features:

Steel
OE Style
Direct Fit
Primered
Limited 5 Year Warranty

from

$54.99

Crown Automotive offers the largest line of replacement parts for Jeep(R) and a growing line of replacement parts for Chrysler and Dodge vehicles. Our applications comes with Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.

Product Features:

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy Installation

from

$26.99

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$647.99

The ARIES TrailCrusher Jeep bumper is constructed to outmatch every other bumper in its class. With heavy-duty, welded steel construction, it is a highly functional companion on the trail, featuring winch and shackle capabilities with a 12.5K rating. The TrailCrusher bumper is available for the front and rear, and it installs with no drilling required. Everything about the TrailCrusher Jeep bumper is designed to maximize its strength and utility. It is built with 3/16″ thick all-steel plates, welded together in a stout, high-strength configuration. It also features 1/4″ thick welded shoulder sleeves that add even more strength, particularly to the shackle mounts. Not only does the TrailCrusher bumper provide a 12,500-lb. winch-and-shackle rating, but it also offers excellent versatility. The winch platform of the bumper features industry-standard mounting holes to accept most types of winches, and the shackle mounts accept any pin up to 7/8″ in diameter. ARIES forged steel shackles #2166071 offer a perfect fit and a work load limit to match the 12.5K rating. A number of winch accessories are also available, including a hawse fairlead #2156070, roller fairlead #2156071 and winch fairlead mount #15600FB. For added winch protection and an aggressive look on the Jeep JL, a stinger-style angular brush guard #2156050 is available. The TrailCrusher bumper is fast and easy to install, integrating with the Jeep Wrangler JL like a stock bumper. It uses pre-existing holes in the vehicle frame to eliminate drilling from the install process, and it mounts with 3/8″ steel brackets for added strength. To be ready for whatever the trail has in store, both the front and rear ARIES one-piece bumpers come an E-coat and carbide black powder-coated finish, maximizing rust and scratch resistance. Each comes with all necessary mounting hardware for a complete installation and is covered by a three-year warranty.

Product Features:

Shackle rating of 12,500 lbs. for ultimate off-road functionality
Welded shackle mounts and 1/4″ thick sleeves provide reliable anchoring points
Shackle mounts accept pins up to 7/8″ in diameter (#2166071 recommended)
No-drill install uses factory mounting points
One-piece construction with 3/16″ thick, all-steel plates for maximum strength
Narrow width and high ground clearance for an improved off-road-style design
Highly durable carbide black powder coat with rust-resistant E-coat finish
Center cutout for rear mount trailer hitch receiver tube
Includes mounting hardware and 3/8″ thick brackets for solid installation

from

$243.99

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$66.99

Protect your Jeep Wrangler doors from theft! Simply replace the upper hinge nuts with the easy to install McGard Door Locks. Once installed, the locks match the OEM hinge nuts, but can only be removed with the special key tool.

Product Features:

High security through-hardened steel construction protects against gripping, drilling & cutting.
The external spin-collar feature turns if attacked by gripping tools to protect against unwanted removal.
Manufactured in the U.S.A.

from

$6.99

Crown Automotive offers the largest line of replacement parts for Jeep (R), as well as a growing line of parts for Chrysler and Dodge vehicles. Our applications features Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.

Product Features:

Constructed From Rubber
Restore The Quality, Control, And Feel You Are Used To With Crown Automotive Body Mount Bushings
Right Choice For Frame-Off Restorations
OE Design For Easy Installation And Material Strength

from

$36.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$249.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Improve The Performance
Easy Installation

from

$787.99

The ARIES TrailCrusher Jeep bumper is constructed to outmatch every other bumper in its class. With heavy-duty, welded steel construction, it is a highly functional companion on the trail, featuring a winch and shackle rating of 12,500 lbs. The TrailCrusher bumper is available for the front and rear, and it installs with no drilling required. Everything about the TrailCrusher Jeep bumper is designed to maximize its strength and utility. It is built with 3/16″ thick all-steel plates, welded together in a stout, high-strength configuration. It also features 1/4″ thick welded shoulder sleeves that add even more strength, particularly to the shackle mounts. Not only does the TrailCrusher bumper provide a 12,500-lb. winch and shackle rating, but it also offers excellent versatility. The winch platform of the bumper features industry-standard mounting holes to accept most types of winches, and the shackle mounts accept any pin up to 7/8″ in diameter. ARIES forged steel shackles #2166071 offer a perfect fit and a work load limit to match the 12.5K rating. A number of winch accessories are also available, including a hawse fairlead #2156070 and roller fairlead #2156071. For added winch protection and an aggressive look on the Jeep JL / JT, this bumper also comes with a stinger-style angular brush guard. The TrailCrusher bumper is fast and easy to install, integrating with the Jeep Wrangler JL or Jeep Gladiator like a stock bumper. It uses pre-existing holes in the vehicle frame to eliminate drilling from the install process, and it mounts with 3/8″ steel brackets for added strength. To be ready for whatever the trail has in store, both the front and rear TrailCrusher bumpers come an E-coat and carbide black powder-coated finish, maximizing rust and scratch resistance. Each comes with all necessary mounting hardware for a complete installation (see application info to verify fitment with your Jeep).

Product Features:

Winch and shackle ratings of 12,500 lbs. for ultimate off-road functionality
Standard winch mounting platform accepts most types of winches
Welded shackle mounts and 1/4″ thick sleeves provide reliable anchoring points
Shackle mounts accept pins up to 7/8″ in diameter (#2166071 recommended)
No-drill install uses factory mounting points with no pump relocation required
One-piece construction with 3/16″ thick, all-steel plates for maximum strength
Narrow width and high ground clearance for an improved off-road-style design
Highly durable carbide black powder coat with rust-resistant E-coat finish
Angular brush guard helps protect the winch and adds an aggressive look
Center round cutouts accept OE bumper lights
Includes mounting hardware and 3/8″ thick brackets for solid installation

from

$28.99

New Standard Replacement Driver Side Front Bumper End

Product Features:

Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$91.99

Laser Measured MudFlaps are custom fit and protect your vehicle s fenders and exterior from rocks, mud, road grime and other debris picked up by your vehicle s wheels. No drilling required and installs in Minutes.

Product Features:

Contoured Specifically For Each Application And Molded From A Proprietary Thermoplastic Resin
MudFlap Will Offers Undeniable Vehicle Protection
Features The Patented QuickTurn Hardened Stainless Steel Fastening System
Provides Protection For Your Vehicles Most Vulnerable Areas Protecting The Fender And Rocker Panel From Stone Chips, Slush, Dirt And Debris
Laser Measured For A Perfect Fit Set Literally Mounts In Minutes (In Most Applications) Without The Need For Wheel Or Tire Removal
Most Importantly Mounts Without The Need For Drilling Into The Vehicles Fragile Painted Metal Surface

from

$169.99

Crown Automotive offers the largest line of replacement parts for Jeep (R). Crown Automotive has consistently maintained its commitment to offering only quality parts and exceptional service. Crown Automotive continues to be the leader in quality replacement parts for Jeep (R) vehicles.

Product Features:

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy Installation

from

$47.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Improve The Performance
Easy Installation

from

$2.99

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$934.99

Sailcloth Replace-a-tops are the quietest soft tops on the market. The secret to this Jeep soft top lies in the unique multi-ply Sailcloth fabric. Each ply plays a different role, but together they reflect road sounds, absorb wind noise, and prevent buffeting to create a silencing effect that absolutely must be heard to be believed. The tough, premium fabric dramatically reduces outside noise and enhances insulation. Kits include soft top, windows and optional door skins. Heat-sealed vinyl windows meet U.S. and Europe regulations. Built to factory original quality specifications to ensure a proper fit. Kits with doors skins attach by Velcro over factory original door frames for easy installation. Optional 31 tinted window feature for a customized look. Limited warranty.

Product Features:

Factory-Spec Velcro/Thread/Webbing
Produced Using OEM Specifications
Produced Using OEM Materials
Made In The USA
Many Feature Zip-Out Windows
Fit Only Factory Original Hardware
Easy Installation

from

$109.99

Plastic Construction
Meets Quality Standards
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy To Install

from

$49.99

Original Equipment Manufacturer Style Replacement Side View Mirror. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:

Driver side Mirror, tested to fit and function like the original, Meets or exceeds Original Equipment Manufacturer standards
Mirror glass is adjusted by moving Mirror head
Manual folding for additional clearance
Black
Superior material and manufacturing process ensures the highest quality possible

from

$21.49

Hood no longer opening or closing properly- This replacement hood latch assembly matches the fit and function of the original equipment hood latch and is made of corrosion-resistant materials for reliable service.

Product Features:

Direct replacement – this hood latch assembly matches the fit and function of the original equipment latch
Durable construction – corrosion-resistant housing enhances this latch’s durability and prevents functional deterioration
Easy installation – requires no special tools to replace
Quality tested – this part has undergone vehicle fitment and material testing to ensure proper fit and reliable service

from

$118.99

Crown Automotive offers the largest line of replacement parts for Jeep(R), as well as a growing line of parts for Chrysler and Dodge. Our applications comes with Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.

Product Features:

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$2.29

Screw; Spare Tire Carrier Mounting; 87-06 Wrangler

from

$47.99

Metal And Rubber Construction
Meets Quality Standards
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy To Install

from

$12.99

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$47.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Improve The Performance
Easy Installation

from

$4.99

Crown Automotive offers the largest line of Body replacement parts for Dodge and Jeep(R). Our applications Comes with Fender, Hood, Windshield, Grille, Tailgate, Bumpers, Door and Window for all Dodge and Jeep(R) models.

Product Features:

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy Installation

Upgrade your 1997 Jeep Wrangler with Top-Quality Body Parts

When it comes to maintaining or upgrading your 1997 Jeep Wrangler, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jeep or enhancing its overall performance, Body Parts are key to keeping your Wrangler functioning at its best. At Advance Auto Parts, we offer a wide selection of 193 Body Parts for the 1997 Jeep Wrangler, designed to meet your needs without breaking the bank. From Truck Bed replacements to Vehicle Doors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Body Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Body Parts for your 1997 Jeep Wrangler at great prices. Our Body Parts inventory for this model ranges from just $1.59 to $2,119.00, with an average price of $140.20. Our 193 Body Parts in stock come from 19 trusted brands, so you’re sure to find the right part for your 1997 Jeep Wrangler without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1997 Jeep Wrangler, we stock popular OEM and aftermarket Body Parts from top names like StrongArm Dorman, and more. StrongArm Body Parts start at just $21.49 and boast an impressive 4.5 stars average rating from customers. With 54 customer reviews and counting, our 1997 Jeep Wrangler Body Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Body Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1997 Jeep Wrangler is always ready to roll. We’re committed to providing you with everything you need to keep your Wrangler in top shape, all in one place. Start shopping confidently below for your 1997 Jeep Wrangler!

Best-Selling Truck Beds for 1997 Jeep Wranglers

Enhance the driving experience in your Jeep with 4 quality Truck Bed components, starting at $143.99.

show more show less

from

$254.99

Truck Cab Cooler protects the cockpit area from UV rays and helps reduce heat build-up inside the vehicle. Easy to install, Cab Coolers use hook and loop fasteners under the mirrors and door handles (varies by model). Some patterns include adjustable webbing straps to wheel wells to securely hold the cover in place. Custom patterned for trucks and SUV’s.

Product Features:

Protects Cab Area From UV & Heat Build-up
Also Good For Snow & Ice Protection
Easy to Install
Stow Behind Seat

from

$254.99

Protects Cab Area From UV & Heat Build-up
Also Good For Snow & Ice Protection
Easy to Install
Stow Behind Seat

from

$143.99

Protects Cab Area From UV & Heat Build-up
Also Good For Snow & Ice Protection
Easy to Install
Stow Behind Seat

from

$143.99

Protects Cab Area From UV & Heat Build-up
Also Good For Snow & Ice Protection
Easy to Install
Stow Behind Seat

Most Popular 1997 Jeep Wrangler Vehicle Doors

Customize your Jeep with 25 Vehicle Doors products like Door Jamb Switches, Door Seals, and Door Lock Clips, all priced under $157.99.

show more show less

from

$12.99

Plastic And Metal Construction
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy Installation

from

$11.99

Fabric Construction
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy Installation

from

$36.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$15.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy Installation

from

$77.99

This door seal is designed to match the fit and function of the original seal on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this door seal is designed to match the fit and function of the original seal on specified vehicles
Restores functionality – this seal is made to fit and fully restore part functionality after the original seal fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$18.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Door Jam Switch detects whether a vehicle door is open or closed, enhancing safety by triggering interior lights and warning systems to prevent accidents or potential damage while driving. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$21.49

This door hinge screw is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this door hinge screw matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this screw is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$78.99

This door seal is designed to match the fit and function of the original seal on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this door seal is designed to match the fit and function of the original seal on specified vehicles
Restores functionality – this seal is made to fit and fully restore part functionality after the original seal fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$93.99

Rubber Construction
Meets Quality Standards
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy To Install

from

$157.99

Long-Lasting, Durable Crown Automotive Products
Offers OE Fit And Function
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts
Easy To Install

from

$93.99

Rubber Construction
Meets Quality Standards
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy To Install

from

$66.99

High security through-hardened steel construction protects against gripping, drilling & cutting.
The external spin-collar feature turns if attacked by gripping tools to protect against unwanted removal.
Manufactured in the U.S.A.

from

$60.99

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Easy To Install

from

$60.99

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Easy To Install

from

$47.99

Metal And Rubber Construction
Meets Quality Standards
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy To Install

from

$47.99

Metal And Rubber Construction
Meets Quality Standards
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy To Install

from

$26.99

Manufactured From High Quality Material
Engineered To The Specifications
Inserts Secure The Upper Window Frame To The Door
Meets The Quality Standards
Easy To Install

from

$26.99

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$25.99

Manufactured From High Quality Material
Engineered To The Specifications
Inserts Secure The Upper Window Frame To The Door
Meets The Quality Standards
Easy To Install

from

$13.99

Long-Lasting, Durable Crown Automotive Products
Offers OE Fit And Function
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts
Easy To Install

from

$8.99

Manufactured From High Quality Material
Finish The Look Of Your Vehicle With RT Off-Road’s Fuel Door
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$6.99

Constructed From Steel
Hazardous Free Material
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts
Easy To Install

from

$5.99

DOORLOCKCYLINDERCLIP

from

$3.99

Long-Lasting, Durable Crown Automotive Products
Offers OE Fit And Function
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts
Easy To Install

Top Picks for 1997 Jeep Wrangler Vehicle Latches and Handles

Upgrade Jeep Wranglers with top-quality Vehicle Latches and Handles parts, including 29 OEM and aftermarket selections for your 1997 model.

show more show less

from

$32.99

Direct replacement – this hood latch assembly matches the fit and function of the original equipment latch
Durable construction – corrosion-resistant housing enhances this latch’s durability and prevents functional deterioration
Easy installation – requires no special tools to replace
Quality tested – this part has undergone vehicle fitment and material testing to ensure proper fit and reliable service

from

$19.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy Installation

from

$52.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy Installation

from

$36.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy Installation

from

$36.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy Installation

from

$10.99

New Standard Replacement Driver Side Front Interior Door Handle, Black Textured

Product Features:

Black Textured, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$84.99

Want a new exterior door handle that matches the original, for far less than going back to the dealership, This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Excellent value – original equipment quality at a lower price
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$49.99

Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Excellent value – original equipment quality at a lower price
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$47.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Improve The Performance
Easy Installation

from

$9.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy Installation

from

$10.99

New Standard Replacement Passenger Side Front Interior Door Handle, Black Textured

Product Features:

Black Textured, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$14.99

Worn or broken window crank handle leading to difficult window operation? Made of durable material for reliable performance, this window crank handle replaces the original equipment handle.

Product Features:

Ideal replacement – this window crank handle matches the fit and function of the original equipment component
Durable construction – this window crank handle is made of durable material to withstand extended use
Easy to install – this window crank requires no special tools to install
Versatile design – this window crank handle is suitable for use in various locations in the vehicle

from

$26.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy Installation

from

$17.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy Installation

from

$136.99

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$118.99

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$88.99

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$83.99

Want a new exterior door handle that matches the original, for far less than going back to the dealership- This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Excellent value – original equipment quality at a lower price
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$69.99

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$55.99

Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Excellent value – original equipment quality at a lower price
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$49.99

Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Excellent value – original equipment quality at a lower price
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$47.99

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$44.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy Installation

from

$44.99

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

In-Demand Vehicle Hoods for 1997 Jeep Wranglers

Select from 7 premium Vehicle Hoods parts for your 1997 Jeep Wrangler, with prices ranging from $10.49 to $746.99.

show more show less

from

$21.49

Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:

Heavy Gauge Steel Body
Self-Cleaning Piston Assembly
Rubber O-Ring Piston Seal

from

$746.99

New CAPA Certified Premium Replacement Hood Panel, With One Washer Hole (Replaces Two Hole Version)

Product Features:

With One Washer Hole (Replaces Two Hole Version), Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$637.99

New Economy Replacement Hood Panel, With One Washer Hole (Replaces Two Hole Version)

Product Features:

With One Washer Hole (Replaces Two Hole Version), Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$104.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Improve The Performance
Easy Installation

from

$54.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Improve The Performance
Easy Installation

from

$27.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy Installation

from

$10.49

HOOD ROD CLIP

Most Sold 1997 Jeep Wrangler Bodies and Fender Parts

Explore our best-selling Jeep parts for the 1997 Wrangler among 68 OEM and aftermarket options starting from $1.59.

show more show less

from

$31.99

Dee Zee Flaps Protect your vehicle and trailer from rocks and messy conditions. Wider than most brands for maximum protection. Black Composite material fits any truck, van or SUV. Universal 11 Inch X 15 Inch Notched 1 pair front or rear flaps and mounting hardware. The road can be a scary place for your vehicle. Rocks, sticks and other debris can wreak havoc on your finish and cause hundreds or even thousands of dollars worth of damage.

Product Features:

Protect Your Vehicle And Trailer From Rocks And Messy Conditions
Universal Fitting
Easy No Drill Installation
Perfect Compliment Nerf Bars

from

$79.99

Don’t let worn body mounts ruin your vehicle’s comfortable ride. This body mount includes all the hardware required for an easy replacement. Made with quality materials for a long service life, this vehicle-specific design is a perfect fit.

Product Features:

Direct replacement – this body mount fits and functions like the original equipment mount
Quality construction – manufactured from premium materials for a long service life
Excellent value – original equipment quality at a lower price
Quality tested – has undergone testing to ensure proper fit and performance

from

$7.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy Installation

from

$32.49

This jounce bumper is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$10.99

Limited 12 Month Or 12,000 Mile Warranty

from

$34.99

Don’t let worn body mounts ruin your vehicle’s comfortable ride. This body mount includes all the hardware required for an easy replacement. Made with quality materials for a long service life, this vehicle-specific design is a perfect fit.
Direct replacement – this body mount fits and functions like the original equipment mount
Quality construction – manufactured from premium materials for a long service life

from

$50.99

The oft overlooked mudflap. One of those protective accessories you Do not realize you need until it is too late. Rocks, sticks, and other road debris can wreak havoc on your cars finish and underside. Dee Zee Mud Flaps protect your vehicle and trailer from damage and add a classic stylistic element to your vehicle.

Product Features:

Classic Styling Of Brite-Tread Aluminum
Front Or Rear Wheel Protection
Radius Notch Contours To The Fender Well
Protected By A BriteGard Powder Coat Finish

from

$9.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy Installation

from

$142.99

Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:

Replace to Restore Ride Height
Gain Durability
Stronger Than Original Rubber Mounts

from

$41.99

Dee Zee Flaps Protect your vehicle and trailer from rocks and messy conditions. Wider than most brands for maximum protection. Constructed of powder coated Brite-Tread aluminum.

Product Features:

Protect Your Vehicle And Trailer From Rocks And Messy Conditions
Classic Diamond Style Design
Protected By A BriteGard Powder Coat Finish
Compliment Brite-Tread Running Boards

from

$18.99

Crown Automotive offers the largest line of replacement parts for Jeep(R), as well as a growing line of parts for Chrysler and Dodge. Our applications Comes with Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.

Product Features:

Foam Construction
Meets Quality Standards
Bump Stops Prevent Expensive Body Damage To Lifted Jeep Vehicles
Easy To Install

from

$2.29

Screw; Spare Tire Carrier Mounting; 87-06 Wrangler

from

$188.99

ARIES 3″ side bars are more than a fancy decal for your truck, Jeep or SUV. They are a confident first step on each new adventure. These 3″ nerf bars are constructed from strong carbon steel for superior rigidity, and they feature a sleek semi-gloss black powder coat finish. For an added edge, each nerf bar also goes through an E-coat process, before receiving its black powder coat, to strengthen and protect the final finish against peeling, chipping and scratching. ARIES 3″ round side bars are also available in polished stainless steel or semi-gloss black powder-coated steel. All ARIES 3″ nerf bars come with heavy-duty steel brackets and non-skid step pads. The mounting brackets are strong and custom-designed for specific makes and models to allow the side bars to contour to the lines of your vehicle. They offer easy installation and the strength necessary to provide sound footing. These particular custom nerf bars fit specific years of the Jeep Wrangler TJ (see application info to verify fitment). ARIES 3″ round side bars also come with non-skid step pads made of tough polypropylene. These step pads feature a textured pattern for enhanced safety, and they cover a wide portion of the tubes for a more comfortable step.

Product Features:

Unique bends to contour to the body of the vehicle
Custom, non-skid step pads for safe entry and exit
3″ diameter, heavy-wall tube design
High-strength carbon steel construction
Highly rust-resistant semi-gloss black powder coat and E-coat finish
No-drill, vehicle-specific application for a custom fit
Heavy-duty steel mounting brackets for a solid step

from

$8.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy Installation

from

$283.99

Replace to Restore Ride Height
Gain Durability
Stronger Than Original Rubber Mounts

from

$62.99

New Standard Replacement Passenger Side Fender Flare, Textured Black

Product Features:

Textured Black, Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$271.99

Plastic Construction
Meets Quality Standards
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy To Install

from

$253.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy Installation

from

$283.99

Replace to Restore Ride Height
Gain Durability
Stronger Than Original Rubber Mounts

from

$181.99

New Standard Replacement Passenger Side Fender Flare, Paint To Match

Product Features:

Paint To Match, Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$181.99

New Standard Replacement Driver Side Fender Flare, Paint To Match

Product Features:

Paint To Match, Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$63.99

Plastic Construction
Meets Quality Standards
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy To Install

from

$49.99

New Standard Replacement Passenger Side Fender Extension, Textured Matte-Black

Product Features:

Textured Matte-Black, Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$46.99

New Standard Replacement Driver Side Fender Extension, Textured Matte-Black

Product Features:

Textured Matte-Black, Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

Top-Rated Body Parts Brands For Your 1997 Jeep Wrangler

Shop for the best-rated brands offering Body Parts and other products for your 1997 Jeep Wranglers. Below you’ll find some of our best rated Body Parts from StrongArm and Dorman, and more. Body Parts from these brands that fit a 1997 Wrangler start at just $21.49 and are rated as high as 4.5 stars. OEM and aftermarket Body Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular StrongArm 1997 Jeep Wrangler Body Parts

When it comes to maintaining or upgrading your 1997 Jeep Wrangler, using quality Body Parts is essential to ensure durability and a perfect fit. StrongArm ticks all of those boxes. We offer a wide selection of StrongArm Body Parts, specifically designed for the 1997 Jeep Wrangler. With over 1 StrongArm brand Body Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $21.49. Plus, with over 10 customer reviews and an average rating of 4.5 stars, you can trust that our StrongArm Body Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $21.49

(10)

Back Glass Lift Support: 25.39" Ext Length, 10.82" Travel, 33 Lbs of Force, 1 Pk

“Great lift supports and easy to install, no more tailgate hitting me in the head!”

Popular Dorman 1997 Jeep Wrangler Body Parts

Dorman auto parts is one of the highest quality Body Part brands in the market. Any 1997 Jeep Wrangler owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 1997 Wrangler, Advance Auto Parts carries a full inventory of 1 Dorman Body Parts. Plus you will be keeping your Jeep in peak condition while saving money because prices on these Dorman Body Parts range up to $32.99, plus, with more than 1 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Body Parts below will deliver on both quality and value.

from $32.99

(1)

Hood Hold-Down Latch

“Good part, good price for my JK”

FAQs for 1997 Jeep Wrangler Body Parts

Which Body Parts are best-sellers for 1997 Jeep Wranglers?

Out of 193 Body Parts that fit 1997 Jeep Wranglers, the following parts are the top sellers:

OE Replacement (12067590) – $7.99
Hood Hold-Down Latch (22149575) – $32.99
Position Control Arm Bumper (11250770) – $32.49

What’s the price range for 1997 Jeep Wrangler Body Parts?

Body Part prices for the 1997 Jeep Wrangler start at $1.59 and go up to $2,119.00 for the most premium parts.

What’s the average price of a Body Part for a 1997 Jeep Wrangler?

The average price for Body Parts for the 1997 Jeep Wrangler is $140.20. Keep in mind the variety of part types within our Body Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Body Parts for other Jeep Wrangler model years?

Yes, we currently carry Body Parts for 37 model years of Jeep Wranglers between 1987 and 2026. Body Parts are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Body Parts for my 1997 Jeep Wrangler?

The cheapest 1997 Jeep Wrangler Body Parts we carry in stock are:

Rivet-Push In-Hole Diameter .250 In. (sold by each) (22142348) – $1.59
OE Replacement, Black, Nylon, Single (50074585) – $1.99
5 Millimeter X 0.8 Thread, Single (50074784) – $1.99
OE Replacement, Single (11900755) – $1.99
Hood Insulation Pad: OE Replacement, Single (50263144) – $1.99

What are the top-rated Body Parts that fit the 1997 Jeep Wrangler?

Out of 54 reviews by customers, our 1997 Jeep Wrangler Body Parts have an average customer rating of . These are some of the highest-rated Body Part types for the 1997 Jeep Wrangler and their top-rated products:

Vehicle Hoods
- Back Glass Lift Support: 25.39" Ext Length, 10.82" Travel, 33 Lbs of Force, 1 Pk (19940090) – $21.49

What types of Body Parts do you sell for my 1997 Jeep Wrangler?

As of 3/1/26, these are some of the most in-demand types of Body Parts for a 1997 Jeep Wrangler:

Can I get help with 1997 Jeep Wrangler Body Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jeep Body Parts and more.

What is your return policy for Jeep Wrangler Body Parts?

Advance Auto Parts keeps returns simple. For new Jeep Wrangler Body Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1997 Jeep Wrangler Body Parts

KAI – Bumper Face Bar (Part No.CH1002251)

Crown Auto Jeep Replacmnt – Cowl To Windshield Frame, Mounts With Adhesive Backing, Black Rubber (Part No.55009127)

Crown Auto Jeep Replacmnt – Black, Plastic, Front Right (Part No.55155756AB)

Omix – Hood (Part No.12003.08)

Crown Auto Jeep Replacmnt – 6 Nuts/ 6 Screws With Washers (Part No.6506825K6)

Carquest Premium – Multi-Purpose Relay (Part No.RAA1734)

ARIES – TrailCrusher Jeep JL Rear Bumper (Part No.2157002)

Crown Auto Jeep Replacmnt – Primer, Black, Steel, Set Of 2, Installs With Rivets (Part No.55175664K)

McGard – Jeep Wrangler 2 Door Lock Set(M6 x 1.0 Thread Size) – Set of 2 Locks & 1 Key (Part No.76058)

Crown Auto Jeep Replacmnt – Rubber, Black (Part No.52002660)

Carquest Premium – Multi-Use Connector (Part No.PTA1077)

Crown Auto Jeep Replacmnt – OE Replacement, With Center High Mount Stop Light (Part No.55397217AJ)

ARIES – TrailCrusher Jeep JL Front Bumper with Brush Guard (Part No.2186002)

KAI – Bumper End (Part No.CH1004128)

WeatherTech – Direct-Fit, Pair, Contoured, Black, Thermoplastic, Quickturn ┐ Fastening System (Part No.120097)

Crown Auto Jeep Replacmnt – OE Replacement (Part No.52058121AB)

Crown Auto Jeep Replacmnt – Oem Replacement, Painted, Black, Steel, Single (Part No.5013723AB)

Crown Auto Jeep Replacmnt – OE Replacement (Part No.6504212)

Bestop – Soft Top: Replace-a-Top(tm); Sailcloth (Part No.79136-35)

Crown Auto Jeep Replacmnt – Black, Plastic, Single (Part No.5KF09RXFAG)

K-Source – Mirror Assembly: Driver Side, Manual Adjustment, Foldable, 1 Pk (Part No.60024C)

Dorman – Help – Hood Catch (Part No.42401)

Crown Auto Jeep Replacmnt – Bumper Guard: Black, Steel, Set of 2 (Part No.5355457K)

Omix – Screw; Spare Tire Carrier Mounting; 87-06 Wrangler (Part No.17258.09)

Crown Auto Jeep Replacmnt – Direct-Fit, Window Glass Strip, Black, Left Door Kit (Part No.55176565AC)

Crown Auto Jeep Replacmnt – Black, Plastic, Single (Part No.55007317)

Crown Auto Jeep Replacmnt – Oem Replacement, Painted, Black, Steel, Single (Part No.5013722AB)

Crown Auto Jeep Replacmnt – Used On Floor Drain, Black, Metal/ Rubber (Part No.55360966AA)

Covercraft – Truck Cab Cooler – Tan Flannel, Tan (Part No.CP11664TF)

Covercraft – Truck Cab Cooler – Tan Flannel, Tan (Part No.CP11665TF)

Covercraft – Truck Cab Cooler – Polycotton, Gray (Part No.CP11665PD)

Covercraft – Truck Cab Cooler – Polycotton, Gray (Part No.CP11664PD)

Crown Auto Jeep Replacmnt – Straight, Non Adjustable, Single (Part No.4687558)

Crown Auto Jeep Replacmnt – OE Replacement (Part No.55176339AC)

Carquest Premium – Multi-Use Connector (Part No.PTA1077)

Crown Auto Jeep Replacmnt – OE Replacement, Hood Mount, Single (Part No.55176422)

Dorman – Driver Door Seal (Part No.924-443)

Carquest Premium – Door Jamb Switch (Part No.SAA1175)

Dorman – Door Hinge Screw Kit (Part No.926-888)

Dorman – Passenger Door Seal (Part No.924-444)

Crown Auto Jeep Replacmnt – Direct-Fit, Full Steel Door Strip, Black (Part No.5017462AF)

Crown Auto Jeep Replacmnt – Direct-Fit, Full Steel Door Strip, Black (Part No.5017462K)

Crown Auto Jeep Replacmnt – Direct-Fit, Full Steel Door Strip, Black (Part No.5017463AF)

McGard – Jeep Wrangler 2 Door Lock Set(M6 x 1.0 Thread Size) – Set of 2 Locks & 1 Key (Part No.76058)

Crown Auto Jeep Replacmnt – Direct Fit, Black Rubber (Part No.5017010AB)

Crown Auto Jeep Replacmnt – Direct Fit, Black Rubber (Part No.5017011AB)

Crown Auto Jeep Replacmnt – Direct-Fit, Window Glass Strip, Black, Right Door Kit (Part No.55176564AC)

Crown Auto Jeep Replacmnt – Direct-Fit, Window Glass Strip, Black, Left Door Kit (Part No.55176565AC)

Crown Auto Jeep Replacmnt – To Replace Upper Door Mounts, Set Of 3 Mount Pins, Spice (Part No.5FB63RTBK)

Crown Auto Jeep Replacmnt – Door/ Tailgate, OE Replacement, Without Key, Single (Part No.4778123)

Crown Auto Jeep Replacmnt – To Replace Upper Door Mounts, Set Of 3 Mount Pins, Charcoal (Part No.5FB63JS1K)

Crown Auto Jeep Replacmnt – OE Replacement (Part No.55076307)

Crown Auto Jeep Replacmnt – OE Replacement (Part No.4658677)

Crown Auto Jeep Replacmnt – OE Replacement (Part No.55295904)

Crown Auto Jeep Replacmnt – DOORLOCKCYLINDERCLIP (Part No.2583377)

Crown Auto Jeep Replacmnt – OE Replacement, Orange (Part No.4658445)

Dorman – Help – Hood Hold-Down Latch (Part No.42422)

Crown Auto Jeep Replacmnt – Black, Plastic/ Rubber, Single, With Fender Mounted Piece Only (Part No.55176636AD)

Crown Auto Jeep Replacmnt – Black, Plastic/ Rubber, Set Of 2 (Part No.55176636K2)

Crown Auto Jeep Replacmnt – Oem Replacement, Black, Steel, Single (Part No.55076223)

Crown Auto Jeep Replacmnt – Oem Replacement, Black, Steel, Single (Part No.55076222)

KAI – Interior Door Handle (Part No.CH1352106)

Dorman – Help – Exterior Door Handle (Part No.79398)

Dorman – Help – Exterior Door Handle (Part No.79334)

Crown Auto Jeep Replacmnt – Oem Replacement, Painted, Black, Steel, Single (Part No.5013723AB)

Crown Auto Jeep Replacmnt – Black, Plastic, Single (Part No.55176428AC)

KAI – Interior Door Handle (Part No.CH1353106)

AutoCraft – Window Handle (Part No.76932)

Crown Auto Jeep Replacmnt – Black, Single (Part No.55176477AB)

Crown Auto Jeep Replacmnt – Black, Single (Part No.55176476AB)

Crown Auto Jeep Replacmnt – Oem, With 2 Exterior Handles/ 2 Interior Handles/ Installation Hardware (Part No.5758172MK)

Crown Auto Jeep Replacmnt – Oem Replacement, Black, Steel, Set Of 2, With 2 Interior Handles (Part No.55076222MK)

Crown Auto Jeep Replacmnt – Oem Replacement, Black, Steel, Set Of 2 (Part No.55076222K)

Dorman – Help – Exterior Door Handle Full Door (Part No.93588)

Crown Auto Jeep Replacmnt – Textured, Black, Zinc, Without Lock (Part No.55176547AB)

Dorman – Help – Exterior Door Handle Half Door and Gate (Part No.93583)

Dorman – Help – Exterior Door Handle Half Door (Part No.93584)

Crown Auto Jeep Replacmnt – Oem Replacement, Black, Steel, Single (Part No.55176548AB)

Crown Auto Jeep Replacmnt – Oem Replacement, Chrome:, Single (Part No.J5758173)