1997 Jaguar Vanden Plas Fuel and Emissions Systems

Essential 1997 Jaguar Vanden Plas Fuel and Emissions Systems

Delphi – Electric Fuel Pump: With Hose Clamps, Insulating Sleeve, Jump Harnesss, Retaining Clips, Seals (Part No.FE0479)

Electric Fuel Pump: With Hose Clamps, Insulating Sleeve, Jump Harnesss, Retaining Clips, Seals

from

$109.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
  • Improved pump performance as a result of Delphi’s innovative design and durability
  • Restores fast pressure performance and system integrity, translating to better pumping through less energy
  • Part is validated, tested and matched to the right vehicle application
  • Lower amperage draws less load on vehicle’s electrical system
  • Always be sure to check and clean fuel tank to avoid unnecessary returns
  • Always replace the fuel strainer when doing a fuel pump repair
See More

ACDelco – Fuel Injector Fuel Feed and Return Pipe O-Ring Kit with Seals with 2 O-Rings (Part No.217-3414)

Fuel Injector Fuel Feed and Return Pipe O-Ring Kit with Seals with 2 O-Rings

from

$10.29
The ACDelco Professional Fuel Injector Seal Kit contains high quality aftermarket replacement components for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket kit contains components that are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Spectra Premium – Mass Air Flow Sensor (Part No.MA102)

Mass Air Flow Sensor

from

$97.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium mass air flow sensors meet or exceed the performance of the original equipment they replace.

Product Features:
  • Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE engine management systems design expertise
  • Platinum connector threads reduce the number of connection points for faster reaction to change
  • Ceramic-built printed circuit boards are protected by silica gel, providing superior resistance to temperature changes and vehicle vibrations
  • Ceramic board provides reliable voltage to eliminate engine rough-idle problems
  • Each new sensor is road tested to ensure real world performance and to verify that each design meets our high standards for quality
  • Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
  • Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
See More

Carquest Premium – ABS Wheel Speed Sensor Connector (Part No.PTA1615)

ABS Wheel Speed Sensor Connector

from

$55.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

FAE – Intake Air Temperature Sensor (Part No.C600042860FAE)

Intake Air Temperature Sensor

from

$33.47
The FAE Intake Air Temperature Sensor is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Eurospare – Fuel Tank Sender Ass (Part No.E2005240582ESP)

Fuel Tank Sender Ass

from

$109.33
Fuel Tank Sender Ass

Original Equipment – Fuel Tank Sender Ass (Part No.E200542657OEA)

Fuel Tank Sender Ass

from

$99.21
Fuel Tank Sender Ass

Eurospares – Eurospare Fuel Injector (Part No.C1000107056ESP)

Eurospare Fuel Injector

from

$134.58
Eurospare fuel injectors are manufactured to OE requirements that meet federal emissions and fuel economy standards, and provide exact OE fit for ease of installation. Eurospare injectors are manufactured using internal components that are compatible with alternative fuels or fuel blends, including ethanol mixtures.

Product Features:
  • Original Equipment Manufacturer
  • Premium internal components
  • OE Calibrated impedance
  • Fine atomized spray reduces emissions
See More

Carquest Premium – Remanufactured Fuel Injector (Part No.A212-2285)

Remanufactured Fuel Injector

from

$40.49
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:
  • Each unit is 100% tested to OE specifications
  • Includes new O-rings and seals made of premium OE quality materials
  • Includes application specific technical bulletin, where applicable
See More

Ajusa – EGR Valve Gasket (Part No.B7100228877AJU)

EGR Valve Gasket

from

$12.65
The AJUSA EGR Valve Gasket is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.EVA1144)

Exhaust Gas Recirculation (EGR) Valve Gasket

from

$7.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Exhaust Gas Recirculation (EGR) Valve (Part No.EGC1038)

Exhaust Gas Recirculation (EGR) Valve

from

$163.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Exhaust Gas Recirculation (EGR) Valve (Part No.EGC2201)

Exhaust Gas Recirculation (EGR) Valve

from

$554.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Eurospare – Eurospare Idle Control Valve (Part No.C403053363ESP)

Eurospare Idle Control Valve

from

$150.10
The Eurospare Idle Control Valve is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Corrosion resistant housing material
  • Premium materials for longer service life
  • Meets or exceeds OEM specifications
See More

Wells Vehicle Electronics – Fuel Injection Pressure Regulator (Part No.5G1413)

Fuel Injection Pressure Regulator

from

$64.99
The fuel injection system is controlled by the engine control module (ECM) and provides a calculated amount of fuel to the combustion chamber for efficient engine operation.

Product Features:
  • Application matched components ensure fuel injection system meets all emission regulations.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Delphi – Fuel Injection Pressure Regulator (Part No.FP10559)

Fuel Injection Pressure Regulator

from

$109.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:
  • Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
  • Quiet operation, no audible regulator noise
  • Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
  • Consistent and predictable fuel pressure throughout system range of control provides great drivability
See More

APA/URO Parts – Relay (Part No.P20201079840APA)

Relay

from

$13.19
Relay

Carquest Premium – Fuel Pump Relay (Part No.RAA2718)

Fuel Pump Relay

from

$45.99
Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
See More

Carquest Premium – Electric Fuel Pump Inertia Switch (Part No.SBA4426)

Electric Fuel Pump Inertia Switch

from

$84.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Fuel Tank Cleaning Kit

from

$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye

Product Features:
  • Helps avoid premature fuel pump failure
  • Lint free towel included
  • Low suds formulation
  • Removes harmful contaminants from the fuel tank
See More

MTC – Crankcase Breather Hose (Part No.B2010268144MTC)

Crankcase Breather Hose

from

$8.20
Air hoses and lines for diesel and gasoline engines with additional blow-by for crankcase ventilation. Prefabricated modules in raw and clean air duct using injection-molded elastomer and plastic items, and blow-molded items.

Product Features:
  • Mount for temperature sensors
  • Noise damping
  • Folds and ribs for flexibility and vacuum stability
  • Molded-on mounts for wires or cables
  • Integrated flow divider
  • Integrated positioning and attachment of prefabricated hose clamps
  • Radial reinforcement for high vacuum stress in tight installation spaces
See More

MTC – Crankcase Breather Hose (Part No.B2010268143MTC)

Crankcase Breather Hose

from

$44.23
Air hoses and lines for diesel and gasoline engines with additional blow-by for crankcase ventilation. Prefabricated modules in raw and clean air duct using injection-molded elastomer and plastic items, and blow-molded items.

Product Features:
  • Mount for temperature sensors
  • Noise damping
  • Folds and ribs for flexibility and vacuum stability
  • Molded-on mounts for wires or cables
  • Integrated flow divider
  • Integrated positioning and attachment of prefabricated hose clamps
  • Radial reinforcement for high vacuum stress in tight installation spaces
See More

Eurospares – Crankcase Breather Hose (Part No.B2010144341ESP)

Crankcase Breather Hose

from

$28.31
Air hoses and lines for diesel and gasoline engines with additional blow-by for crankcase ventilation. Prefabricated modules in raw and clean air duct using injection-molded elastomer and plastic items, and blow-molded items.

Product Features:
  • Mount for temperature sensors
  • Noise damping
  • Folds and ribs for flexibility and vacuum stability
  • Molded-on mounts for wires or cables
  • Integrated flow divider
  • Integrated positioning and attachment of prefabricated hose clamps
  • Radial reinforcement for high vacuum stress in tight installation spaces
See More

Delphi – Fuel Pump Strainer (Part No.FS0092)

Fuel Pump Strainer

from

$35.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Filtration performance and micron rating meet or exceed OE requirements
  • OE replacement strainer designed for use with Delphi electric fuel pumps
  • Replacing the strainer is always recommended when replacing a fuel pump
See More

Delphi – Fuel Pump Strainer (Part No.FS0120)

Fuel Pump Strainer

from

$11.49
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Filtration performance and micron rating meet or exceed OE requirements
  • OE replacement strainer designed for use with Delphi electric fuel pumps
  • Replacing the strainer is always recommended when replacing a fuel pump
See More

1997 Jaguar Vanden Plas Fuel and Emissions Systems

You count on your 1997 Jaguar Vanden Plas to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 21 Fuel and Emissions Systems ranging in price from $2.49 to $325.99, you’re sure to find everything you need for your 1997 Jaguar Vanden Plas.

Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 11 different brands like Delphi, DENSO, and Carquest Premium. 1997 Jaguar Vanden Plas Fuel and Emissions Systems start as low as $2.49!

One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 4 extensive product reviews on 1997 Jaguar Vanden Plas Fuel and Emissions Systems. Some of the top-rated Fuel and Emissions Systems products we carry are Turbine Electric Fuel Pump with 1.0 stars.

Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 1997 Jaguar Vanden Plas below to get started!

Top-Rated Fuel and Emissions Systems Brands For Your 1997 Jaguar Vanden Plas

Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1997 Jaguar Vanden Plas running right for years to come. In our inventory you’ll find brands like Delphi, DENSO, Carquest Premium, and even more.

Popular DENSO Fuel and Emissions Systems

You’ll find popular DENSO brand products across Fuel Pumps. All are waiting to get your 1997 Jaguar Vanden Plas back on the road. Some of the top-rated DENSO products in these categories are:
Original Equipment Quality Electric Fuel Pump
from $124.99
(3)
Original Equipment Quality Electric Fuel Pump
Fuel Pumps

FAQs for 1997 Jaguar Vanden Plas Fuel and Emissions Systems

What are the most purchased Fuel and Emissions Systems for the 1997 Jaguar Vanden Plas?

Out of 21 Fuel and Emissions Systems for the 1997 Jaguar Vanden Plas, the most popular in our inventory are:
Fuel Tank Cleaning Kit
from $12.49
This product is not rated
Fuel Tank Cleaning Kit
Fuel Tank Cleaning Kits
Fuel Injector Seal Kit
from $8.99
This product is not rated
Fuel Injector Seal Kit
Fuel Injector Seal Kits
Exhaust Gas Recirculation (EGR) Valve Gasket
from $2.49
This product is not rated
Exhaust Gas Recirculation (EGR) Valve Gasket
EGR Valve Gaskets

What are the top-rated 1997 Jaguar Vanden Plas Fuel and Emissions Systems?

Top-rated Fuel and Emissions Systems for your 1997 Jaguar Vanden Plas based on customer reviews/ratings are:
Turbine Electric Fuel Pump
from $134.14
(1)
Turbine Electric Fuel Pump
“First of all, this pump does not come with the return pipe and the pressure sensor. So you need to swap your old parts onto the pump. HOWEVER, they ”