from

$129.99

This fuel tank sending unit is designed to match the fit and function of the original unit on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this fuel tank sending unit is designed to match the fit and function of the original unit on specified applications
Restores functionality – reliable replacement for an original part that has failed due to internal sensor failure
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$94.99

This fuel tank sending unit is designed to match the fit and function of the original unit on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this fuel tank sending unit is designed to match the fit and function of the original unit on specified applications
Restores functionality – reliable replacement for an original part that has failed due to internal sensor failure
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$41.99

Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest spin-on fuel filters keep fuel clean and engines running at maximum efficiency.

Product Features:

Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
Application engineered media which aids in stripping water in diesel fuels
Patent pending drain, metal end caps, which hold media in place
Rust resistant can, ensuring no leakage from inside
Made in USA
Includes Standpipe
CAUTION: Furnished D-Ring must be installed on post for seal.

from

$33.99

Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest spin-on fuel filters keep fuel clean and engines running at maximum efficiency.

Product Features:

Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
Application engineered media which aids in stripping water in diesel fuels
Patent pending drain, metal end caps, which hold media in place
Rust resistant can, ensuring no leakage from inside
Made in USA
CAUTION: Furnished D-Ring must be installed on post for seal.
Use with 99185

from

$31.99

This repair solution allows for the replacement of broken, melted or damaged connector plugs, which can cause intermittent connections, resulting in engine misfire and hard-starting. New harness connector pigtail ensures proper electrical signals are supplied to the injectors and glow plugs.

Product Features:

Valve cover gasket connector pigtail connects between engine harness and valve cover gasket
Two required per side

from

$232.99

Injection control pressure determines fuel injection quantity under varying engine operating conditions. Improper injection quantity can result in poor engine performance or a no-start condition. New IPR valve is manufactured to meet or exceed original equipment performance specifications to ensure precise control of injection oil pressure.

Product Features:

Original equipment fit, form and function
Manufactured to precise OE performance specifications

from

$244.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Application-specific to ensure the proper fit and form
Precision-engineered pressure regulators for proper fuel delivery and engine performance
As a global manufacturer, we have complete control of the manufacturing process, from components to finished product?

from

$14.29

The injector sleeve provides sealing and cooling between the diesel fuel injector and cylinder head. Improper sealing can lead to combustion gas and coolant leaks into the fuel system, which can result in engine misfire and injector failure. Replacing the sleeve at time of injector service or replacement ensures proper sealing, improving injector longevity.

Product Features:

Original equipment fit, form and function

from

$14.05

Qualities that have made SMP an industry leader for more than 95 years, innovation, engineering expertise, superior quality, meticulous testing, unmatched customer service, competitive pricing, and brand integrity, are at the heart of every TechSmart part.

Product Features:

Direct fit replacement provides proper fit, form, and function
Quality-engineered replacement for faulty OE part, which can fail from improper installation and wear-and-tear from carbon buildup
Constructed from reinforced brass to seal and protect immediate area of injector bore within cylinder head
All TechSmart® parts meet or exceed OE performance, providing today’s technician with the quality parts needed to get the job done right, the first time

from

$11.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation

from

$14.99

The components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles. They are engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged.

Product Features:

Direct replacements – the components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles
Ideal solution – engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$21.99

Complete injector seal kit includes all six components necessary to properly reseal injector when reinstalled. All parts in kit are manufactured using premium OE quality materials.

Product Features:

Includes pink and blue high-pressure oil seals, black square oil seal, steel back-up ring, orange fuel seal and copper combustion seal
Premium OE quality materials
Services one injector

from

$23.05

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
State-of-the-art designs that meet or exceed OE specifications
Top-of-the-line quality and performance
With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
BWD is a global manufacturer of original equipment and aftermarket fuel injection products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$362.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

from

$344.99

CARDONE Remanufactured Fuel Injectors provide an alternative plug and play solution to fuel delivery for diesel applications. All units are flow tested and balanced and replaced with new O-rings and gaskets. Each unit retains OEM duty cycle and pulse width ensuring reliable performance. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.

Product Features:

All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
All components are renewed or replaced as necessary to ensure high quality and durability
When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
Guaranteed fit and function
Meets or exceeds O.E.M. performance

from

$166.99

A critical component in the fuel injection system, the ICP sensor supplies the powertrain control module with injection control pressure, which is used to control injection quantity. Failure can result in poor drivability and/or illumination of the engine malfunction indicator or check engine lamp. New precision sensor is designed to meet or exceed OE performance specifications.

Product Features:

Original equipment fit, form and function
Meets or exceeds OE performance specifications
Premium materials ensure trouble-free operation

from

$233.99

Diesel engine idling rough, misfiring or stalling? This replacement injector control pressure sensor matches the fit and function of the original equipment sensor to ensure the control module receives accurate information for smooth running.

Product Features:

Direct replacement – this diesel injector control pressure (IPC) sensor matches the fit, function and performance of the original equipment sensor
Reliable construction – this IPC sensor is built from quality components to deliver an accurate signal to the ECM
Easy installation – this sensor features a factory-style electrical connector
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life

from

$829.99

Automotive diesel engines rely on high pressure oil pumps to circulate oil throughout the engine as well as assist in fuel injection and timing functions. CARDONE Remanufactured High Pressure Oil Pumps are direct O.E. replacement units that have been completely disassembled, cleaned and inspected before renewal. All standard wear items are replaced with brand new components and functional testing is performed on every unit to ensure perfect fit and reliable performance.

Product Features:

Starts as a genuine O.E. core.
Completely disassembled, cleaned and inspected to determine condition of core
All standard wear items are replaced with new components
Functional testing is performed on every unit to assure product matches O.E. performance
Supplied with mounting gasket and injection pressure regulator seal kit, where applicable.

from

$794.99

CARQUEST premium remanufactured high-pressure oil pumps are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each pump is 100% tested on a sophisticated flow bench under multiple operating parameters to meet or exceed OE specifications.

Product Features:

Each unit is 100% tested to OE specifications
Includes pump gasket

from

$81.99

This repair solution allows for the replacement of broken, melted or damaged connector plugs, which can cause intermittent connections, resulting in engine misfire and hard-starting. New harness connector pigtail ensures proper electrical signals are supplied to the injectors and glow plugs.

Product Features:

Harness connects between valve cover gasket connector and fuel injectors and glow plugs
One required per side

from

$322.99

This replacement fuel injector harness matches the fit and function of the original equipment part to restore proper operation of the injection system. Made of quality materials, it features full insulated electrical connectors to prevent corrosion.

Product Features:

Ideal replacement – this fuel injector harness matches the original equipment part on specified vehicle years, makes and models
Durable construction – this harness includes fully insulated electrical connectors to prevent corrosion
Plug and play installation – made with factory-style connectors for quick, reliable installation
Quality tested – this part has undergone try-on, corrosion and material testing to ensure a quality fit and long service life

from

$33.49

This fuel injection pressure regulator seal is designed to match the fit and function of the original seal on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel injection pressure regulator seal is designed to match the fit and function of the original seal on specified vehicles
Restores functionality – this seal is made to fit and fully restore part functionality after the original seal fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$131.99

Recommended for replacement whenever the fuel tank is replaced or serviced, this strap is a direct replacement for the original. Manufactured from durable materials to withstand harsh road and weather conditions.

Product Features:

Direct replacement – this fuel tank strap matches the fit, function and performance of the original part
Ideal solution – recommended for replacement when the fuel tank is serviced or replaced
Durable construction – manufactured from quality materials for superior service and reliability
Trustworthy design – backed by 100 years of automotive aftermarket experience

from

$427.99

CARDONE Remanufactured Fuel Injection Regulating Valves control the pressure in the high pressure oil system which operates your injectors. Vehicle conditions such as poor idle, stalling, and no-start are some of the correctible symptoms. Each individual unit is completely disassembled and undergoes quality testing to ensure proper operating parameters to meet or exceed OEM performance.

Product Features:

Built and 100% tested to perform like the original, with all standard wear items replaced
Air decay tested to ensure on-car performance
Designed for easy installation and setup
Guaranteed fit and function
Meets or exceeds O.E.M. performance

from

$438.99

CARDONE Remanufactured Fuel Injection Regulating Valves control the pressure in the high pressure oil system which operates your injectors. Vehicle conditions such as poor idle, stalling, and no-start are some of the correctible symptoms. Each individual unit is completely disassembled and undergoes quality testing to ensure proper operating parameters to meet or exceed OEM performance.

Product Features:

Built and 100% tested to perform like the original, with all standard wear items replaced
Air decay tested to ensure on-car performance
Designed for easy installation and setup
Guaranteed fit and function
Meets or exceeds O.E.M. performance