Name: Fuel Pump Relay
Brand: ACDelco
SKU: P2037620205ACD
Price: 36.27 USD

from

$36.27

Fuel Pump Relay

from

$142.99

A malfunctioning vapor canister vent solenoid can cause the engine light to come on. This vapor canister vent solenoid is engineered of quality materials for durability to ensure proper operation of the vehicle’s evaporative emissions system.

Product Features:

Direct replacement – this vapor canister vent solenoid fits and performs like original equipment with simple plug-and-play installation
Quality construction – manufactured from premium materials for a long service life
Excellent value – original equipment function at a lower price
Quality tested – has undergone simulation and endurance testing to ensure proper fit and performance

from

$233.99

CARQUEST fuel pump sender assemblies feature exact fit, with design improvements, such as upgraded polymers, brushes, and commutators to ensure lasting durability in multiple fuel blends. Also features advanced rust-inhibiting finish for longer life.

Product Features:

Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
Advanced rust-inhibiting finish for long-lasting durability
High-performance pump section assembly provides superior performance
Leading-edge inlet design to reduce friction and increase performance
Gradient density strainer designed for better contamination resistance

from

$14.49

Replace only the damaged connectors instead of the entire fuel line with these direct-replacement fuel line connectors. Designed for easy installation and a precise fit, they are engineered to withstand extreme underhood conditions.

Product Features:

Direct replacement – these fuel line connectors fit and function like the vehicle’s original equipment connectors for reliable, leak-free performance
Quality construction – manufactured from premium materials for a long service life
Saves money – replace only the part, not the entire assembly
Excellent value – original equipment quality at a lower price

from

$12.49

To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye

Product Features:

Helps avoid premature fuel pump failure
Lint free towel included
Low suds formulation
Removes harmful contaminants from the fuel tank

from

$125.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$104.99

CARQUEST enhanced electric in-tank fuel pumps are 100% quality tested and are designed to deliver quiet operation, industry-leading performance and durability. All CARQUEST pumps meet or exceed OE specifications in fit, form and function.

Product Features:

Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
Advanced polymers, brushes and commutators to ensure long life and durability in multiple fuel blends.
High-performance pump section assembly provides superior performance
Leading-edge inlet design to increase performance and efficiency, leading to longer life
High grade outer shell for life-long corrosion resistance
Optimized, precision-wound armature assembly for increased performance

from

$15.99

CARQUEST lock rings are designed to positively seat the fuel pump in proper position inside the tank. These precision stamped rings are made from corrosion-resistant and durable metals for long life.

Product Features:

Precision stamped for perfect fit and pump position
Always replace lock ring as a part of fuel pump service

from

$25.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$116.50

The complete line of Motorcraft sensors and emission components is recommended by Ford Motor Company exclusively for use in Ford and Lincoln vehicles.

Product Features:

Helps ensure optimal performance and durability
Designed for long service life under harsh conditions in under-hood environment
Works with other vehicle emission sensors to deliver optimal fuel efficiency and emissions
Adherence to OE specs helps minimize repeat repairs and false Check Engine warnings
Design includes OE innovations and upgrades
100 percent coverage of Ford and Lincoln vehicles

from

$4.49

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$63.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$45.05

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

Our ignition coils use 100% pure copper windings in the primary and secondary bobbins to improve durability and provide higher resistance to internal shorts and dielectric breakdown
Our premium ignition coils consist of a special blended formula for the best performance, longest life and better heat dissipation
A full E-Lam core of silicon steel and solid brass high voltage terminals protects against corrosion. Our ignition coils are built for maximum output voltage
Primary and Secondary windings feature enamel magnet wire for the highest temperature rating in the aftermarket
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$11.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$69.99

Wire Assembly

from

$56.99

Make better electrical repairs and accessory installations with this pigtail connector. Designed for a clean appearance when installed, it features weatherproof terminals and a locking tab for a reliable quick disconnect electrical connection.

Product Features:

Professional appearance – this electrical pigtail is designed for a clean, professional look when installed
Convenient solution – this pigtail connector allows the circuit to be quickly disconnected for service or occasional use
Durable construction – this pigtail connector features weatherproof seals and a locking tab for a reliable connection
Versatile component – this connector can be used in a variety of repairs and custom installations

from

$110.07

The complete line of Motorcraft sensors and emission components is recommended by Ford Motor Company exclusively for use in Ford and Lincoln vehicles. Motorcraft oxygen sensors are designed for maximum performance.

Product Features:

Same components used in the factory
Units come ready to plug and play, with no need for modifications
OE connectors and wire lengths
Tight tolerance ranges help minimize repeat repairs and false Check Engine warnings
Designed to help provide optimal performance and fuel economy
OE enhancements are included in the most current designs
Vehicle-specific coverage Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install.

from

$24.99

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$41.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$174.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
Metal tubes in Delphi hangers are routed so as to not contact the tank or vehicle underbody at any point eliminating noise and vibration during vehicle operation
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Lower failure rates due to its innovative design and durability
Part is validated, tested and matched to the right vehicle application
Lower amperage draws less load on vehicle’s electrical system
Always be sure to check and clean fuel tank to avoid unnecessary returns

from

$10.29

The ACDelco Professional Fuel Injector Seal Kit contains high quality aftermarket replacement components for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket kit contains components that are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$53.99

The EGR system is an emission control device designed to recirculate exhaust gas into the engines air intake system and back to the combustion chamber to control nitrogen oxides or NOx. The chemical NOx is created when oxygen and nitrogen are heated above 2,800-degree F. Exhaust gas, or gas that is displaced from the combustion chamber, contains little to no oxygen molecules. By recirculating this gas back into the combustion chamber fewer oxygen molecules are available for the combustion event which will therefore create a cooler combustion event. The EGR valve can be actuated by engine vacuum or electronically by the engine control module.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Our EGR valves are designed to match the vehicle specific exhaust gas flow rate as designed by the engine manufacturer to provide clean tail pipe emissions.
Feedback EGR valves and pressure sensors contain a robust circuit board design which increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
Where applicable stainless-steel sleeves used over cold rolled sleeves providing smooth EGR pintle operation under all operating conditions.

from

$62.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Application-specific to ensure the proper fit and form
Precision-engineered pressure regulators for proper fuel delivery and engine performance
As a global manufacturer, we have complete control of the manufacturing process, from components to finished product?

from

$30.99

The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:

OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor

from

$115.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium mass air flow sensors meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE engine management systems design expertise
Platinum connector threads reduce the number of connection points for faster reaction to change
Ceramic-built printed circuit boards are protected by silica gel, providing superior resistance to temperature changes and vehicle vibrations
Ceramic board provides reliable voltage to eliminate engine rough-idle problems
Each new sensor is road tested to ensure real world performance and to verify that each design meets our high standards for quality
Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed

from

$25.06

The Walker Air Charge Temperature Sensor is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$59.05

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Precision-wound and precision-trimmed solenoid windings allow the computer to command efficient delivery of fuel
High-temp Viton® O-rings enable prolonged sealing of injector under extreme heat conditions
Fiber-optic yttrium aluminum garnet “YAG” laser welding and 100 million cycle testing ensure quality in every box

from

$353.99

The only parts recommended by Ford Motor Company for Ford and Lincoln vehicles. Motorcraft Hoses are designed and tested to Ford’s rigorous engineering standards. Motorcraft parts fit right the first time for quicker, easier installation.