1997 Ford LNT9000 Fuel and Emissions Systems

Essential 1997 Ford LNT9000 Fuel and Emissions Systems

Delphi – Fuel Injector (Part No.EX631763)

Fuel Injector

from

$439.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:
  • 100% O-ring replacement
  • All Delphi injectors are tested utilizing OE methodologies
  • Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
  • No internal seal rings equals minimized leakage
  • Recessed fuel exit minimizing possible plugging
  • Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
  • Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock
See More

Cardone – Fuel Injector (Part No.2J-602)

Fuel Injector

from

$609.99
CARDONE Remanufactured Fuel Injectors provide an alternative plug and play solution to fuel delivery for diesel applications. All units are flow tested and balanced and replaced with new O-rings and gaskets. Each unit retains OEM duty cycle and pulse width ensuring reliable performance. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.

Product Features:
  • All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
  • Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
  • All components are renewed or replaced as necessary to ensure high quality and durability
  • When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
  • Guaranteed fit and function
  • Meets or exceeds O.E.M. performance
See More

Cardone – Fuel Injector (Part No.2J-900)

Fuel Injector

from

$493.99
CARDONE Remanufactured Fuel Injectors provide an alternative plug and play solution to fuel delivery for diesel applications. All units are flow tested and balanced and replaced with new O-rings and gaskets. Each unit retains OEM duty cycle and pulse width ensuring reliable performance. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.

Product Features:
  • All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
  • Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
  • All components are renewed or replaced as necessary to ensure high quality and durability
  • When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
  • Guaranteed fit and function
  • Meets or exceeds O.E.M. performance
See More

Delphi – Fuel Injector (Part No.EX631767)

Fuel Injector

from

$439.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:
  • 100% O-ring replacement
  • All Delphi injectors are tested utilizing OE methodologies
  • Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
  • No internal seal rings equals minimized leakage
  • Recessed fuel exit minimizing possible plugging
  • Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
  • Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock
See More

Delphi – Fuel Injector (Part No.EX631756)

Fuel Injector

from

$476.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:
  • 100% O-ring replacement
  • All Delphi injectors are tested utilizing OE methodologies
  • Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
  • No internal seal rings equals minimized leakage
  • Recessed fuel exit minimizing possible plugging
  • Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
  • Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock
See More

Delphi – Fuel Injector (Part No.EX631766)

Fuel Injector

from

$439.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:
  • 100% O-ring replacement
  • All Delphi injectors are tested utilizing OE methodologies
  • Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
  • No internal seal rings equals minimized leakage
  • Recessed fuel exit minimizing possible plugging
  • Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
  • Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock
See More

Carquest Premium – Heavy Duty Fuel Cap: 10603, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10603)

Heavy Duty Fuel Cap: 10603, Screw On, Direct Fit, Provides Tight Seal, 1 Pack

from

$39.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – HD Locking Fuel Cap (Part No.10413)

HD Locking Fuel Cap

from

$59.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Dorman – HD Solutions – Ambient Air Pressure Sensor (Part No.904-7126)

Ambient Air Pressure Sensor

from

$126.99
This barometric pressure sensor is designed to match the fit and function of the original sensor on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this barometric pressure sensor is designed to match the fit and function of the original sensor on specified vehicles
  • Ideal solution – this sensor is a reliable replacement for an original part that has failed due to fatigue or electrical malfunction
  • Durable construction – this sensor is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Fuel/Water Separator Spin-on with Drain (Part No.86406)

Fuel/Water Separator Spin-on with Drain

from

$41.99
Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest spin-on fuel filters keep fuel clean and engines running at maximum efficiency.

Product Features:
  • Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
  • Application engineered media which aids in stripping water in diesel fuels
  • Patent pending drain, metal end caps, which hold media in place
  • Rust resistant can, ensuring no leakage from inside
  • Made in USA
  • Includes Standpipe
  • CAUTION: Furnished D-Ring must be installed on post for seal.
See More

Carquest Premium – Fuel/Water Separator Spin-on with Drain (Part No.96064)

Fuel/Water Separator Spin-on with Drain

from

$33.99
Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest spin-on fuel filters keep fuel clean and engines running at maximum efficiency.

Product Features:
  • Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
  • Application engineered media which aids in stripping water in diesel fuels
  • Patent pending drain, metal end caps, which hold media in place
  • Rust resistant can, ensuring no leakage from inside
  • Made in USA
  • CAUTION: Furnished D-Ring must be installed on post for seal.
  • Use with 99185
See More

Carquest Premium – Fuel Spin-on with Drain (Part No.86405)

Fuel Spin-on with Drain

from

$27.49
Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest spin-on fuel filters keep fuel clean and engines running at maximum efficiency.

Product Features:
  • Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
  • Made in USA
  • CAUTION: Furnished D-Ring must be installed on post for seal.
See More

1997 Ford LNT9000 Fuel and Emissions Systems

You count on your 1997 Ford LNT9000 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 11 Fuel and Emissions Systems ranging in price from $27.49 to $609.99, you’re sure to find everything you need for your 1997 Ford LNT9000.

Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 4 different brands like Carquest Premium, Cardone, and Delphi. 1997 Ford LNT9000 Fuel and Emissions Systems start as low as $27.49!

One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 5 extensive product reviews on 1997 Ford LNT9000 Fuel and Emissions Systems.

Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 1997 Ford LNT9000 below to get started!

Top-Rated Fuel and Emissions Systems Brands For Your 1997 Ford LNT9000

Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1997 Ford LNT9000 running right for years to come. In our inventory you’ll find brands like Carquest Premium, Cardone, Delphi, and even more.

Popular Carquest Premium Fuel and Emissions Systems

You’ll find popular Carquest Premium brand products across Fuel Pumps. All are waiting to get your 1997 Ford LNT9000 back on the road. Some of the top-rated Carquest Premium products in these categories are:
Fuel/Water Separator Spin-on with Drain
from $33.99
(1)
Fuel/Water Separator Spin-on with Drain
Fuel and Water Separators
Fuel/Water Separator Spin-on with Drain
from $41.99
(1)
Fuel/Water Separator Spin-on with Drain
Fuel and Water Separators
Fuel Spin-on with Drain
from $27.49
(1)
Fuel Spin-on with Drain
Fuel and Water Separators