1997 Ford F Super Duty Drivetrains
More 1997 Ford F Super Duty Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1997 Ford F Super Duty, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1997 Ford F Super Duty Drivetrains
National – Bearings (Part No.HM88510)
from
$14.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng (Part No.33327)
from
$7.99
Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225″ DIA, for X/P shaft, 1.87″ LNG.
Product Features:
See More
Product Features:
- Roll pin for Dana Spicer 50, 60, 70, 70U, 70HD and 80
- 0.225″ diameter
- 1.870″ long
Yukon Gear – Side Gear Thrust Washer For Dana 60, 70 & 80 (Part No.33532)
from
$4.99
Product Features:
See More
- Side gear thrust washer for Dana Spicer 60, 70, 70U, 70HD and 80
- Fits standard open differentials only
Yukon Gear – Replacement Yoke For Dana 80 With A 1480 U/Joint Size (Part No.41035)
from
$235.99
Yukon replacement yoke for Dana 80 with a 1480 U/joint size. 4.188″ snap ring span, 1.375″ cap diameter. Outside snap ring.This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 80
- 37 spline
- 1480 u-joint size
- 4.188″ snap ring span
- 1.375″ cap diameter
- Outside snap ring design
- Strap style
Yukon Gear – Pinion Install Kit For Dana 80 Differential (4.125" OD Only) (Part No.13036)
from
$319.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits Dana Spicer 80 with 4.125″ O.D. pinion bearing
- Included are pinion bearings and races, pinion seal, pinion nut, complete pinion shim kit, and marking compound with brush.
Driveworks – Tapered Roller Bearing (Part No.S-HM-803146)
Yukon Gear – Replacement Standard Open Carrier Case For Dana 80, 3.73 & Down (Part No.20049)
from
$529.99
Yukon replacement standard open carrier case for Dana 80, 3.73 & down, (incl ABS) 35 & 37 spline.
Product Features:
See More
Product Features:
- Standard open carrier case
- Fits Dana Spicer 80
- 3.73 and down ratio only
- Does not include spider gears
Yukon Gear – Replacement Pinion Nut For Dana 80 (Part No.33145)
from
$26.99
Replacement pinion nut for Dana 80, 1 7/8″ socket.
Product Features:
See More
Product Features:
- Pinion nut for Dana Spicer 80
- 1 7/8″ socket
Yukon Gear – 1410 Lifetime Series U/Joint (Part No.42022)
from
$84.99
Yukon 1410 Lifetime Series U/Joint. 4.188″ span ring span. 1.188″ cap diameter. Outside snap ring.
See More
Dorman – Transfer Case Gasket (Part No.917-522)
from
$10.79
Transfer case gasket warped and cracked? This replacement gasket restores a tight seal to prevent fluid leaks on certain vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – this transfer case gasket matches the fit and performance of the original gasket on specific vehicle applications
- Effective fix – restores a tight seal in the transfer case after original gasket fails
- Durable construction – built for reliable longevity, free of defects in materials and workmanship
- Trustworthy quality – backed by team of designers and engineers in the United States
National – Shaft Repair Sleeve (Part No.99139)
from
$39.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
National – Multi Purpose Bearing (Part No.HB-88508-AA)
from
$58.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)
from
$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.
Product Features:
See More
Product Features:
- Includes three quarts of Redline Shockproof oil
Yukon Gear – Replacement Shim Kit For Dana 80 (Part No.55025)
from
$89.99
Product Features:
See More
- Complete shim kit for Dana Spicer 80
- 4.125″ O.D. pinion bearing application only
Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)
from
$5.99
3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.
Product Features:
See More
Product Features:
- Cover bolt for Dana Spicer 60, 70 and 80
- 3/8″
Milemarker – Hub Conversion Kit (Part No.95-32721)
National – Multi Purpose Seal (Part No.710413)
from
$23.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
USA Standard Gear – Bearing Kit For Dana 80 (4.125" OD Only) (Part No.58003)
from
$329.99
This kit uses Koyo bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. USA Standard Gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.
Product Features:
See More
Product Features:
- Fits Dana Spicer 80 with 4.125″ O.D. pinion bearing
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, pinion nut, marking compound and brush.
Yukon Gear – High Performance Replacement Ring & Pinion Gear Set For Dana 80 In A 3.31 Ratio (Part No.24323)
from
$1010.00
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.
Product Features:
See More
Product Features:
- Fits Dana Spicer 80
- 11.25″ ring gear diameter
- 37 spline pinion
- 12 ring gear bolts
- 3.31 ratio
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
Spicer – Universal Joint (Part No.5-160X)
from
$40.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More
Motive Gear – Differential Pinion Solid Spacer Kit w/Shims (Part No.4105)
Milemarker – MileMarker Supreme; Manual Hub (Part No.449S/S)
from
$428.99
Ultimate in style and service. Latest patented technology. Smooth operation. Limited lifetime warranty. 10 spline, 6 bolts. Chrome.
Product Features:
See More
Product Features:
- Ultimate In Style And Service
- Latest Patented Technology
- Smooth Operation
- Limited Lifetime Warranty
National – Shaft Repair Sleeve (Part No.99187)
from
$41.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Dorman – Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm (Part No.615-073.1)
from
$4.99
This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm (sold by each) (Part No.615-073)
from
$4.99
This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Repleacement Ring Gear Bolt For Dana 80 (Part No.33039)
from
$7.99
Repleacement ring gear bolt for Dana 80. 9/16″ x 18.
Product Features:
See More
Product Features:
- Ring gear bolt for Dana Spicer 80
- 9/16″ x 18 thread
Motive Gear – Ring Gear Bolt (Part No.E5TZ4216A)
Popular 1997 Ford F Super Duty Drivetrains Categories
1997 Ford F Super Duty Drivetrains
You count on your 1997 Ford F Super Duty to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 197 Drivetrains ranging in price from $2.99 to $1,884.99, you’re sure to find everything you need for your 1997 Ford F Super Duty.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 17 different brands like Valvoline, Moog, and National. 1997 Ford F Super Duty Drivetrains start as low as $2.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 1,374 extensive product reviews on 1997 Ford F Super Duty Drivetrains. Some of the top-rated Drivetrains products we carry are MileMarker Supreme; Manual Hub with 4.1 stars and Greaseable Premium Universal Joint with 4.7 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1997 Ford F Super Duty below to get started!
Top-Rated Drivetrains Brands For Your 1997 Ford F Super Duty
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1997 Ford F Super Duty running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, National, and even more.
Popular Driveworks Drivetrains
You’ll find popular Driveworks brand products across Differentials and Transfer Cases. All are waiting to get your 1997 Ford F Super Duty back on the road. Some of the top-rated Driveworks products in these categories are:
Top-Rated Drivetrains
If are what you’re looking for, our inventory holds plenty. We stock brand Drivetrains for your 1997 Ford F Super Duty, and some of our most reviewed parts include:
FAQs for 1997 Ford F Super Duty Drivetrains
What are the most purchased Drivetrains for the 1997 Ford F Super Duty?
Out of 197 Drivetrains for the 1997 Ford F Super Duty, the most popular in our inventory are:
What are the top-rated 1997 Ford F Super Duty Drivetrains?
Top-rated Drivetrains for your 1997 Ford F Super Duty based on customer reviews/ratings are:
from
$428.99
(36)
MileMarker Supreme; Manual Hub
“Attractive, affordable option. Easy installation, works well so far.”
