1997 Ford F-150 Pickup Performance and Racing Products

Below you will find various in-demand Ford Performance and Racing Products, components and accessories for your 1997 F-150 Pickup. Advance Auto Parts has popular F-150 Pickup parts like Performance Engines, Performance Ignition Products, Performance Steering Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other F-150 Pickup model years including 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996 and more. Select a category of 1997 Ford F-150 Pickup Performance and Racing Products below and start saving instantly.

Popular 1997 Ford F-150 Pickup Performance and Racing Products Categories

Computer Chip Programmers

Performance Air Filters

Performance Coils

Performance Air Intake Kits

Performance Exhaust Mufflers

Engine Cold Air Intakes

Performance Shifters

Performance Throttle Body Spacers

Performance Exhaust System Kits

Performance Body Mounts

Performance Engine Intake Manifold Gaskets

Performance Coil Spring Insulators

Performance Chassis Bushing Kits

Performance Posi Units and Components

Performance Exhaust Tail Pipes

Performance Leaf Spring Bushings

Performance Ignition Kits

Performance Ring and Pinions

Performance Ignition Parts

Performance Sway Bar Link Kits

Performance Lower Control Arm Bushings

Performance Sway Bar Bushings

Performance Tie Rod End Boots

Performance Transmission Shift Kits

Nitrous Oxide Injection System Kit

Essential Performance and Racing Products for 1997 Ford F-150 Pickups

from

$479.99

The B&M Megashifter has it all, form, function and classic style. This all adds up to bring you a quality shifter that’s been one of the most popular automatic shifters of all time. The light truck Megashifter is better suited for truck and bench seat applications with its overall height of 14.85-inches tall (2.25-inches taller than #80690 Megashifter.) The positive ratcheting action won’t allow you to over-shift and miss a gear at that critical moment, along with the reverse lockout feature meets NHRA/IHRA safety rules for those weekend grudge races at the track, while the look and feel of the T-handle and accordion style shift boot really shows off its racing heritage. Other features include a black console that you can trim to match the contour of your vehicle’s floor, 5-foot long shifter cable, cable brackets, transmission shift levers, chrome plated top plate with lighted gear indicator and everything needed for an easy at home installation. An optional T-handle with a 12-volt button is available separately for actuating a trans-brake, nitrous oxide or other accessories for the hard-core performance enthusiast. This shifter fits most popular Chrysler, Ford and GM 3 and 4-speed automatic transmissions. Note: AOD transmissions require optional kit #40496, GM 4L60E through 4L85E transmissions with PRNDL switch will require optional kit #70499. Overall Dimensions – 14.9L x 6.4W x 14.8H

Product Features:

Universal Floor Mount Application
Cable Operated
Quick Installation
Accurate Shifting
NHRA/IHRA Reverse Lockout Meets Requirements
Use w/Reverse Pattern Valve Body
Includes Neutral Safety Switch
Includes Backup Light Switch

from

$87.99

Manufactured from high quality machine finished aluminum, Spectre’s Throttle Body Spacers are engineered to improve engine performance. By providing added volume to the intake manifold and directing air through a tapered internal constriction, this spacer utilizes the Venturi effect to increase the speed of air flowing into your intake manifold. Spectre has designed a number of kits to fit a wide range of specific applications. Each kit includes the necessary gaskets and hardware to bolt directly to the factory components, making installation quick and easy.

Product Features:

Includes the necessary gaskets and hardware to bolt directly to the factory components
Each kit is designed for the applications listed
Manufactured from high quality machine finished aluminum
Can be installed in less than an hour using common hand tools with no drilling or cutting required
Simple to install

from

$89.99

Made of superior Hyper-Flex material. Saves replacing again and again, lasting 3 to 10 times longer. Assemble to chassis the same way as OEM isolators and do not adversely change ride characteristics.

Product Features:

Made of Superior Hyper-Flex+ Material
Lasts from 3 to 10 Times Longer
Assemble to Chassis Same Way as OEM
Maintains Factory Ride Characteristics
Simple Way to Increase Vehicle Height

from

$38.49

Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. This is a low density material that conforms well to irregular surfaces and has very good crush resistance at high flange pressures. They provide excellent sealing and durability as the material is designed for sealing gasoline, oils, water and coolant in applications up to 350 degrees Fahrenheit. While die-cut for an excellent fit, they can be trimmed if necessary for modified port applications. Comes complete with front & rear manifold end seals. For original equipment replacement, high performance street, drag race and oval track.brbrFits all Ford 351M/400 – 4V or 4-Barrel heads.

Product Features:

Manufactured from cellulose/nitrile composition gasket material
Provides excellent sealing and durability
Die-cut for an excellent fit
Can be trimmed if necessary for modified port applications
Complete with manifold end seals
For OE replacement, high performance street, drag race and oval track use

from

$23.99

Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

Product Features:

Made of Superior Hyper-Flex+ Material
Adds Dramatic Amount of Performance/Durability
Helps Vehicle Be in Control
Allows the Suspension to Function Properly

from

$46.99

Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$371.99

The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.

Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.

Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.

Powertrax® = Extreme Traction Systems!

from

$109.99

Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:

Assures Longer Lasting Cab to Bed Alignment
Replace to Restore Ride Height
Gain Durability
Stronger Than Original Rubber Mounts

from

$456.99

The X4 Performance Programmer connects high-performance tunes to your vehicle for an immediate boost in horsepower and torque. Awaken your engine to its maximum real potential with preloaded, dyno-proven tune files through the easy-to-use functionality. Instantly increase horsepower and torque and customizeModify a variety of parameters at the touch of a button, all while monitoring gauges on a customizable display.

Product Features:

Read vehicle performance data on a full-color LCD display for easy viewing, day or night.
Preloaded, street-tested, dyno-proven tunes boost horsepower, torque, and throttle sensitivity.
Reads and clears DTC (Diagnostic Trouble Codes) with ease.
Load up to 10 custom tune files created by any SCT Custom Tuning Dealer.
Full color LCD display
High-speed data logging/monitoring
Dual analog inputs
Most popular vehicles supported
Installs quickly and easily
Easy restoration back to stock
User adjustable vehicle parameters
USB Interface cable included
Product might not be available in all states due to local laws.

from

$344.99

RngPnn

from

$36.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$65.99

Made from quality materials for durability, DynoMax® pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS – Made from stainless steel for durability and long life
BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade

from

$499.99

K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:

GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
IMPROVED ENGINE SOUND: Hear the power under the hood.
WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
HIGH QUALITY: Made in America.

from

$30.49

Product Features:

Service Part
Makes Connections Quick And Easy

from

$245.99

Give your vintage vehicle¿s exhaust system an upgrade with a DynoMax dual header kit. Designed attach to OE headers, it features a special reducer that allows for a variety of mounting options.

Product Features:

COMPATIBILITY — Designed for the 1980-96 Ford Bronco and a variety of F-150, F-250 and F-350 trucks
BUILD IT YOURSELF — Design and custom fabricate your own exhaust system with this kit that attaches to OE headers
FLEXIBLE MOUNTING — Special reducer design allows for a variety of mounting options
IMPROVED FLOW CAPACITY — Smooth bends improve flow capacity over traditional bends
SPECS — Extra-long tailpipes with side exits with a full 2.25-in. diameter; tail pipes exit on passenger side behind rear tire; dual kit runs down right-hand side between frame and driveshaft; does not fit one-ton 4×4 trucks
COMPLETE SOLUTION — Includes all the necessary clamps, hangers, flanges, gaskets, mounting hardware, intermediate, extension and tail pipes
PREMIUM MATERIALS?–?Made from quality aluminized steel for durability and long life
BETTER TOGETHER — Complete your system with premium DynoMax mufflers and DynoMax accessories for a complete performance exhaust system
WARNING — Not legal for use on pollution-controlled motor vehicles; headers are for racing use only and not intended or applicable for highway use

from

$65.99

These new coils mount directly in place of the factory coils and accept the factory connectors. Spark energy is increased thanks to improved materials and windings that were spec’d by MSD engineering.

Product Features:

Bolt-on Performance
Factory replacement coil

from

$89.99

K&N performance High-Flow Air Filters are engineered to improve engine performance. Unlike disposable paper filters which must be frequently replaced, K&N Air Filters are washable, reusable, and engineered to last for the life of your vehicle or outdoor power small engine. Engineered to fit easily into your factory air box, installation can be completed in a matter of minutes! K&N develops and tests each product on the world┐s toughest race tracks, so we can bring the highest level of performance to your daily driving. Join the millions of customers who have saved money and improved vehicle performance by upgrading to K&N filtration.

Product Features:

ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (based on the average miles driven per year of 15,000 miles)
ULTIMATE LONGEVITY: No-hassle lifetime warranty on stock replacement K&N air filters- limitations apply
EASY INSTALLATION: K&N Air Filters are pre-treated and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
ECO-FRIENDLY: Using a washable, reusable engine air filter helps reduce replacement air filter waste- a K&N air filter is designed to last longer than 10 or more disposable filters
MADE IN USA: K&N Air Filters are proudly made in the USA for trusted quality & reliability

from

$156.99

For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$349.99

GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
IMPROVED ENGINE SOUND: Hear the power under the hood.
WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
HIGH QUALITY: Made in America.

from

$175.99

Shift Improver Kit – 1996 to 1999 Ford, Lincoln, Mercury 4R70W Application: 1996 to 1999 Ford, Lincoln, Mercury 4R70W Recalibrate your automatic transmission for optimum performance and extended life! Select the mode that best suits your application Provides crisp shifts on any stock automatic transmission Eliminates shift overlap and excess wear on clutches and bands due to slippage Application: 1996 to 1999 Ford, Lincoln, Mercury 4R70W The B&M Shift Improver Kit the easiest way to get the stout performance you’ve always wanted out of your automatic transmission – and you get two modes of performance to select from: Heavy Duty, or Street/Strip. It’s our least expensive and simplest to install kit. All you need are some hand tools! In the space of an afternoon, you can turn your transmission into a B&M-tuned unit! Ask the thousands of satisfied customers that have installed one in their transmissions! STAGE 1. HEAVY DUTY Firm positive shifts without loss of driver comfort for improved performance in all street vehicles. Recommended for regular passenger vehicles. STAGE 2. STREET/STRIP Provides positive shifts for high performance street use or for competitive events. This level is for the enthusiast who wants the hardest, quickest possible shift.

Product Features:

Provides Crisp Shifts
On Any Stock Automatic Transmission
Eliminates Soft/Sluggish Shift
Eliminates Shift Overlap
Eliminate Clutch and Band Wear
Improves Transmission Life
Transmission Removal Not Required

from

$176.99

Using MSD’s DIS-4 ignition systems on your coil-on-plug Ford has always been a great upgrade, but honestly, the wiring poses quite a challenge. To ease this install, we now offer a wiring harness kit that’ll make the install nearly a direct plug-in. The harness provides a splice-free installation with connectors that plug directly into the factory unit. They even have corresponding wire colors. When used in conjunction with two DIS-4 ignitions and four dual ignition Adapters, PN 89121, your coil-on-plug Ford will receive all the spark it needs plus a two-step rev limit and step retard. And the best part is wiring will only take about an hour.

Product Features:

Easily install two DIS-4 Ignitions on late model Ford Engines
Easy Connections w/No Splicing Or Cutting Into Factory Wiring
Wiring the system will take only an hour
Multiple direct plug in connectors
Wiring the system will only take and hour

from

$9.99

Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$882.99

Available in different sizes for many different vehicle models/years. Designed for EFI models. Power increases from 50-150 HP. Supplies nitrous directly into the intake system. Not for sale or use on pollution-controlled motor vehicles. In the early days of the automotive performance industry, you either ran what was available or you fabricated something you thought met your needs. Such needs were the building blocks of this industry, and it was through the efforts of many that we have the automotive aftermarket, but it was through the work of one name in particular to which many in the industry owe a great debt, and that name is Edelbrock.

Product Features:

Designed for EFI Fords
80 HP power increase
Supplies Nitrous Directly Into The Intake Stream

from

$175.99

The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

from

$115.99

DynoMax Super Turbo performance mufflers exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow and reduce backpressure. Each muffler uses fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone.

Product Features:

Large internal flow tubes improve exhaust flow and reduce backpressure
Exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications.
Fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone
Dyno proven to flow up to 700 SCFM

from

$549.99

Product Features:

Incredible Improvement in Control
Maintains Proper Caster and Camber Alignment
Increase in Handling and Control
Greatly Reduce Wheel Hop on Quick Acceleration
Even Braking Control is Improved
Better Suspension Stability

from

$549.99

Product Features:

Incredible Improvement in Control
Maintains Proper Caster and Camber Alignment
Increase in Handling and Control
Greatly Reduce Wheel Hop on Quick Acceleration
Even Braking Control is Improved
Better Suspension Stability

from

$248.99

Product Features:

Incredible Improvement in Control
Maintains Proper Caster and Camber Alignment
Increase in Handling and Control
Greatly Reduce Wheel Hop on Quick Acceleration
Even Braking Control is Improved
Better Suspension Stability

Upgrade your 1997 Ford F-150 Pickup with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1997 Ford F-150 Pickup, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Performance and Racing Products are key to keeping your F-150 Pickup functioning at its best. At Advance Auto Parts, we offer a wide selection of 80 Performance and Racing Products for the 1997 Ford F-150 Pickup, designed to meet your needs without breaking the bank. From Performance Engine replacements to Performance Ignition Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1997 Ford F-150 Pickup at great prices. Our Performance and Racing Products inventory for this model ranges from just $9.99 to $882.99, with an average price of $165.41. Our 80 Performance and Racing Products in stock come from 16 trusted brands, so you’re sure to find the right part for your 1997 Ford F-150 Pickup without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1997 Ford F-150 Pickup, we stock popular OEM and aftermarket Performance and Racing Products from top names like Spectre, Energy Suspension, Flowmaster Inc., and more. Spectre Performance and Racing Products start at just $49.99 and boast an impressive 4 stars average rating from customers. Energy Suspension and Flowmaster Inc. also bring quality to the table, with Performance and Racing Products available starting at $9.99, and at an average 4 stars rating. With 193 customer reviews and counting, our 1997 Ford F-150 Pickup Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1997 Ford F-150 Pickup is always ready to roll. We’re committed to providing you with everything you need to keep your F-150 Pickup in top shape, all in one place. Start shopping confidently below for your 1997 Ford F-150 Pickup!

Best-Selling Performance Engines for 1997 Ford F-150 Pickups

Enhance the driving experience in your Ford with 3 quality Performance Engine components, starting at $40.99.

show more show less

from

$87.99

Includes the necessary gaskets and hardware to bolt directly to the factory components
Each kit is designed for the applications listed
Manufactured from high quality machine finished aluminum
Can be installed in less than an hour using common hand tools with no drilling or cutting required
Simple to install

from

$42.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$40.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Fel-Pro performance intake manifold gaskets have been tested with virtually all aftermarket cylinder head and intake manifold combinations.
Performance intake manifold gaskets designed without a metal core, to allow engine builders to trim the gasket for exact fit on modified ports.
5.4L Cobra R; Upper intake
Not intended for use in emission controlled vehicles.

Most Popular 1997 Ford F-150 Pickup Performance Ignition Products

Customize your Ford with 7 Performance Ignition Products products like Performance Coils, Performance Ignition Kits, and Performance Ignition Parts, all priced under $186.99.

show more show less

from

$117.99

Designed to be used with late model Ford waste spark ignition systems. 83:1 turns ratio and lower primary resistance produce high voltage output. Secondary towers designed for snap on spark plug terminals. Primary terminals require Ford style connector. Carb O.E. approved.

Product Features:

Designed to use w/late model Ford waste spark ignition systems
83:1 turns ratio
Lower Primary Resistance Produces High Voltage Output
Secondary towers designed for snap on spark plug terminals
Primary terminals require Ford style connector

from

$85.29

Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:

Service Part
No Moving Parts To Wear Out
Self Contained Unit
Can Drive OEM
Can Drive High Performance Ignition Coils

from

$77.99

Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Results in quicker starts, improved idle quality, and crisper throttle response. Compatible with late model Ford EEC-IV computer controlled ignition system equipped with a TFI distributor. Direct OEM replacement. Can also be used with an ACCEL, Mallory, Crane, Holley or MSD capacitive discharge ignition system. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Brass coil wire contact increases energy efficiency and resists corrosion better than aluminum. High dielectric strength ACCEL Yellow over-molded housing.

Product Features:

Direct Plug In Replacement Direct OE Fit
Advanced Bobbin Technology
Standard Motor Products SMP Fd-478
MSD 5527
Standard Motor Products SMP Fd-478
MSD 5527
Resists Shock And Vibration
Resists Corrosion

from

$116.99

Engineered to be the only true performance Ford 4-tower style EDIS coil. Advanced bobbin technology, highly specialized silicone magnetic steel core, optimized winding, resistance, and turns ratio result in higher energy and voltage outputs, and longer arc duration. Direct OEM replacement. Must use factory firing order. Compatible with Ford EDIS computer controlled ignition system as well as Crane or MSD capacitive discharged (CD) DIS ignition systems. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Secondary towers molded in high dielectric strength ACCEL Yellow. Packaged as single unit: 4 cyls require 1 coil pack, “”twin plug”” 4 cyls require 2 coil packs and 8 cyls require 2 coil packs. No tsuitable for some late 1999 applications.

Product Features:

10-15% More Energy
Direct Plug In Replacement Direct OE Fit
Advanced Bobbin Technology
Highly Specialized Silicone Magnetic Steel Cores
Standard Motor Products SMP Fd-487
MSD 8241

from

$54.39

The improved spark energy and voltage of MSD’s blaster 2 coils, combined with reliability, have made them a favorite for performance enthusiasts. Whether firing a restored BOSS 429 or a Saturday night circle tracker, the blaster 2 has always gotten the job done. MSD is excited to offer blaster coils for late model Ford engines with coil-on-plug technology. The new blaster COPs are designed as a direct bolt-in replacement coil for many SOHC Modular Motors. The housing and installation are the same as the factory, but that’s where the similarity ends. Inside the MSD red housing, engineers spec’d better material to assemble the primary and secondary windings. There is also patented dual magnet technology to step up the output. Together, this combines a coil that produces higher voltage and spark energy. The coil-on-plug design of the blaster COPs puts the spark energy right out of the coil and across the plug gap to improve the combustion and output of the engine. The blaster 2 COPs are available individually or as a complete set of eight.

Product Features:

Fits 1999-2004 4.6L And 5.4L SOHC 2V
Improved Spark Energy And Voltage Output
Patented Winding Design and Materials
Direct Bolt-In to Factory Connectors
CARB approved legal for use in all states

from

$176.99

Easily install two DIS-4 Ignitions on late model Ford Engines
Easy Connections w/No Splicing Or Cutting Into Factory Wiring
Wiring the system will take only an hour
Multiple direct plug in connectors
Wiring the system will only take and hour

from

$186.99

Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:

Glass Filled Polyester Case
Longer Spark Duration
Increased Performance
No Energy Loss Due To Arcing
Includes Brass Contact Terminal

Top Picks for 1997 Ford F-150 Pickup Performance Steering Products

Upgrade Ford F-150 Pickups with top-quality Performance Steering Products parts, including 31 OEM and aftermarket selections for your 1997 model.

show more show less

from

$9.99

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$46.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$46.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$46.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$203.99

Assures Longer Lasting Cab to Bed Alignment
Replace to Restore Ride Height
Gain Durability
Stronger Than Original Rubber Mounts

from

$46.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$31.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$32.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$30.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$30.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$30.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$30.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$32.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$32.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$30.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$214.99

Assures Longer Lasting Cab to Bed Alignment
Replace to Restore Ride Height
Gain Durability
Stronger Than Original Rubber Mounts

from

$30.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$36.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$30.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$32.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$32.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$36.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$30.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$36.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$36.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$36.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$36.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$32.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$30.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$30.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$30.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

In-Demand Performance Air Filters for 1997 Ford F-150 Pickups

Select from 1 premium Performance Air Filters parts for your 1997 Ford F-150 Pickup.

show more show less

from

$49.99

This Spectre OEM replacement air filter is an easy to install performance option for the stock cone shaped air filter in multiple Ford applications. With its HPR (High Performance Replacement) synthetic air filter media, this air filter has been designed to add horsepower and quicker acceleration by allowing more air flow into your engine than ordinary paper filters. Engineered to fit in the stock oval and egg shaped Ford air filter housings, this air filter includes sealing gaskets at the base of the air filter to insure a proper seal for great engine protection.

Product Features:

HPR OE Replacement Air Filter
High flow replacement filter designed to fit perfectly in your stock air box
Engineered for increased flow and greater performance
Fits multiple Ford applications
Factory pre-oiled and ready to use
Easy to install with no special tools or skills required

Most Sold 1997 Ford F-150 Pickup Performance Exhaust Products

Explore our best-selling Ford parts for the 1997 F-150 Pickup among 8 OEM and aftermarket options starting from $65.99.

show more show less

from

$102.99

DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone.

Product Features:

Stainless steel construction for lifelong protection
100% welded design for maximum durability
Straight through design ensures unrestricted exhaust flow and reduces back pressure
CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.

from

$846.99

The MagnaFlow Street Series Cat-Back Performance Exhaust System 15609 brings out the personality of your 4.6L, 5.4L 1997-2004 Ford with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Ford exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15609 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15609 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

Dyno-proven performance
Durable corrosion-resistant stainless steel construction
CNC precision robotic manufacturing techniques

from

$99.99

The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$175.99

from

$115.99

Large internal flow tubes improve exhaust flow and reduce backpressure
Exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications.
Fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone
Dyno proven to flow up to 700 SCFM

from

$156.99

Stainless steel construction for lifelong protection
100% welded design for maximum durability
Straight through design ensures unrestricted exhaust flow and reduces back pressure
CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.

from

$65.99

Made from quality materials for durability, DynoMax® pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS – Made from stainless steel for durability and long life
BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade

from

$81.99

Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS?–?Made from stainless steel for durability and long life
BETTER TOGETHER — Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade

Top-Rated Performance and Racing Products Brands For Your 1997 Ford F-150 Pickup

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1997 Ford F-150 Pickups. Below you’ll find some of our best rated Performance and Racing Products from Spectre, Energy Suspension, and Flowmaster Inc., and more. Performance and Racing Products from these brands that fit a 1997 F-150 Pickup start at just $9.99 and are rated as high as 4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular Spectre 1997 Ford F-150 Pickup Performance and Racing Products

When it comes to maintaining or upgrading your 1997 Ford F-150 Pickup, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Spectre ticks all of those boxes. We offer a wide selection of Spectre Performance and Racing Products, specifically designed for the 1997 Ford F-150 Pickup. With over 2 Spectre brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $49.99, with an average price of just $68.99. Plus, with over 10 customer reviews and an average rating of 4 stars, you can trust that our Spectre Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$49.99

(10)

Spectre Replacement Air Filter

“Good as k&n for way less $”

from
$87.99

This product is not rated

Throttle Body Spacer

“”

Popular Energy Suspension 1997 Ford F-150 Pickup Performance and Racing Products

Energy Suspension auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1997 Ford F-150 Pickup owner should feel confident when installing genuine Energy Suspension parts in their vehicle. To ensure the best fit and performance for your 1997 F-150 Pickup, Advance Auto Parts carries a full inventory of 37 Energy Suspension Performance and Racing Products. Plus you will be keeping your Ford in peak condition while saving money because prices on these Energy Suspension Performance and Racing Products range from $9.99 to $549.99, plus, with more than 3 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

from
$46.99

This product is not rated

Sway Bar Bushing Set

“”

from
$46.99

This product is not rated

Sway Bar Bushing Set

“”

from
$86.99

This product is not rated

Leaf Spring Bushing Set

“”

FAQs for 1997 Ford F-150 Pickup Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1997 Ford F-150 Pickups?

Out of 80 Performance and Racing Products that fit 1997 Ford F-150 Pickups, the following parts are the top sellers:

Spectre Replacement Air Filter (10162674) – $49.99
40 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (16120043) – $99.99
Tie Rod Dust Boot (17360821) – $9.99

What’s the price range for 1997 Ford F-150 Pickup Performance and Racing Products?

Performance and Racing Product prices for the 1997 Ford F-150 Pickup start at $9.99 and go up to $882.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1997 Ford F-150 Pickup?

The average price for Performance and Racing Products for the 1997 Ford F-150 Pickup is $165.41. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Ford F-150 Pickup model years?

Yes, we currently carry Performance and Racing Products for 17 model years of Ford F-150 Pickups between 1980 and 1996. Performance and Racing Products are bought most frequently for the following model years: 1996, 1995, 1994, 1993, 1992, 1991, 1990, 1989, and 1988.

What are the cheapest Performance and Racing Products for my 1997 Ford F-150 Pickup?

The cheapest 1997 Ford F-150 Pickup Performance and Racing Products we carry in stock are:

Tie Rod Dust Boot (17360821) – $9.99
Differential Pinion Solid Spacer Kit w/Shims (19640050) – $22.79
Sway Bar Bushing Set (22908684) – $30.99
Sway Bar Bushing Set (22908688) – $30.99
Sway Bar Bushing Set (22908755) – $30.99

What are the top-rated Performance and Racing Products that fit the 1997 Ford F-150 Pickup?

Out of 193 reviews by customers, our 1997 Ford F-150 Pickup Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1997 Ford F-150 Pickup and their top-rated products:

Performance Air Filters
- Spectre Replacement Air Filter (10162674) – $49.99
Performance Air Intake Kits
- Spectre Replacement Air Filter (10162674) – $49.99

What types of Performance and Racing Products do you sell for my 1997 Ford F-150 Pickup?

As of 2/5/25, these are some of the most in-demand types of Performance and Racing Products for a 1997 Ford F-150 Pickup:

Can I get help with 1997 Ford F-150 Pickup Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Performance and Racing Products and more.

What is your return policy for Ford F-150 Pickup Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Ford F-150 Pickup Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1997 Ford F-150 Pickup Performance and Racing Products

B & M – Automatic Shifter, Light Truck Megashifter (Part No.80680)

Spectre – Throttle Body Spacer (Part No.11261)

Energy Suspension – Coil Spring Isolator Set (Part No.4.6106R)

Mr. Gasket – Intake Gasket (Part No.222)

Energy Suspension – Leaf Spring Bushing Set (Part No.4.2133R)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5154G)

Powertrax – Lock Right Locker (Part No.1822-LR)

Energy Suspension – Hyper-Flex Polyurethane Cab & Body Mount Set for Improved Ride and Alignment (Part No.4.4107G)

SCT Performance – Preloaded Performance Programmer for Increased Horsepower & Torque (Part No.7015)

Richmond Gear – RngPnn (Part No.69-0179-1)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5129G)

Dynomax – 54678 Exhaust Tail Pipe (Part No.54678)

K&N – Cold Air Intake: Adds Up To 6 Horsepower, With Million Mile Air Filter (Part No.77-2550KP)

Mallory – Distributor Wiring Harness (Part No.29349)

Dynomax – 89016 Exhaust System Kit (Part No.89016)

MSD Ignition – Coil; Street Fire; Ford TFI (Part No.5527)

K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.E-1570)

Energy Suspension – Control Arm Bushing Set (Part No.4.3145G)

K&N – Cold Air Intake: Adds Up To 10 Horsepower, With Million Mile Air Filter (Part No.57-2514-4)

B & M – Shift Improver Kit (Part No.40266)

MSD Ignition – Harness; Ford 4.6L Modular to DIS-4 Ignition (Part No.88813)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

Edelbrock – Performer Ford EFI Nitrous Systems for 1986-95 Mustang 5.0L/1996-98 4.6L (80 Hp) (Part No.70400)

Flowmaster Inc. – 50 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Moderate Sound (Part No.842451)

Dynomax – Super Turbo Muffler Universal Fit Aluminized Steel, 18" L, 3" In, 3" Out, Round (Part No.17698)

Energy Suspension – Hyper-Flex System (Part No.4.18123R)

Energy Suspension – Hyper-Flex System (Part No.4.18122G)

Energy Suspension – Hyper-Flex System (Part No.4.18101R)

Spectre – Throttle Body Spacer (Part No.11261)

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 2 Piece Set (Part No.1343)

FEL-PRO Performance – Upper Intake Manifold (Plenum) Gasket Set: 2 Piece Set (Part No.1236)

MSD Ignition – Coil; Ford DIS Coil Pack; 4 Tower; Stock (Part No.8241)

Mallory – Unilite Ignition Module (Part No.605)

Accel – Ford 1984-98 Eec-Iv Supercoil (Part No.140012)

Accel – Ford 4-Twr.Dis Supercoil Pack (Part No.140018)

MSD Ignition – Coil; Ford 4.6/5.4L 2-Valve 98-14 Single (Part No.8242)

MSD Ignition – Harness; Ford 4.6L Modular to DIS-4 Ignition (Part No.88813)

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5172R)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5147G)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5154G)

Energy Suspension – Body Cab Mount Set (Part No.4.4114R)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5147R)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5104R)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5105R)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5125R)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5123R)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5118G)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5123G)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5107R)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5103R)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5122R)

Energy Suspension – Body Cab Mount Set (Part No.4.4113G)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5117G)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5127R)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5124G)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5107G)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5102G)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5115R)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5125G)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5115G)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5128G)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5129G)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5129R)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5105G)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5121G)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5120G)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5120R)

Spectre – Spectre Replacement Air Filter (Part No.HPR8039)

Dynomax – Ultra Flo Muffler: Universal Fit, Stainless Steel, 14" L, 3" In, 3" Out, Oval (Part No.17220)

MagnaFlow – Street Series Cat-Back Performance Exhaust System (Part No.15609)

Flowmaster Inc. – 40 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.42543)

Flowmaster Inc. – 50 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Moderate Sound (Part No.842553)

Dynomax – Super Turbo Muffler Universal Fit Aluminized Steel, 18" L, 3" In, 3" Out, Round (Part No.17698)

Dynomax – Ultra Flo Muffler: Universal Fit, Stainless Steel, 14" L, 3" In, 2.5" Out, Oval (Part No.17228)

Dynomax – 54678 Exhaust Tail Pipe (Part No.54678)

Dynomax – Exhaust Tail Pipe (Part No.55522)