1997 Ford F-150 Pickup Drive Shafts and Axles

Essential 1997 Ford F-150 Pickup Drive Shafts and Axles

Spicer – Axle Shft Univ Joint (Part No.5-3226X)

Axle Shft Univ Joint

from

$47.99
Axle Shft Univ Joint

Yukon Gear – Model 20 & Model 35 Axle Stud 1/2"-20 X 1.625" Length, 0.620" Dia – Knurl (Part No.33181)

Model 20 & Model 35 Axle Stud 1/2"-20 X 1.625" Length, 0.620" Dia - Knurl

from

$5.99
Model 20 & Model 35 axle stud 0.620″ Dia. Shank.

Product Features:
  • Axle stud for AMC Model 20 and Model 35
  • 1/2″ x 20 thread
  • 0.620″ knurl diameter
  • 1.625″ long
See More

Yukon Gear – Plug Adapter For Extra-Large Clamshell (Part No.56070)

Plug Adapter For Extra-Large Clamshell

from

$47.99
Plug adapter for extra-large clamshell. No Return.

Product Features:
  • Plug adapter for Extra Large clamshell
  • Fits carrier bearing puller
See More

Driveworks – Drive Shaft Center Support (Part No.S-HB-88508-A)

Drive Shaft Center Support

from

$29.49
Drive Shaft Center Support

SKF – Axle Seal (Part No.K4021285300SKF)

Axle Seal

from

$8.03
SKF’s advanced PTFE oil seal offers optimum performance in extreme temperature and fluid environments. Other benefits of this seal include; reduced friction, longer service life, easier assembly, reduced weight and compact design.

Product Features:
  • Machined rubber sealing edge provides greater accuracy and consistency, as well as a better sealing surface.
  • The flanged design allows for easier and proper installation and helps avoid cocking.
  • The latex bore coat seals the outer diameter leak path and helps compensate for minor bore imperfections.
  • Extra dust lip helps keep harmful contaminants, such as dirt, out of the bearing and protects against rust and corrosion.
See More

FAG US – AXLE BEARING (Part No.FC67147)

AXLE BEARING

from

$36.49
AXLE BEARING

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6106)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$32.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to FORD 97-01;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1997-2001
  • Weight approx: 4 Lbs
  • BEARING ID / BORE: 1.3780 INCH / 35 MM
  • CENTERLINE: 2.75 INCH / 70 MM
  • MOUNT WIDTH: 6.62 INCH / 168 MM
  • STYLE: HORSESHOE
  • WITH PLATE
  • WITHOUT STUDS
See More

Yukon Gear – C/Clip (Part No.33083)

C/Clip

from

$8.99
C/Clip for Chrysler 8.25″, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 8.2″, 8.5″ & 8.6″.

Product Features:
  • c-clip for Chrysler 8.25″, Ford 8.8″, GM 12 bolt car and truck and GM 8.2″, 8.5″ and 8.6″
  • .150″ thick
See More

National – Multi Purpose Seal (Part No.223012)

Multi Purpose Seal

from

$16.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Yukon Gear – Tapered Axle Bearing And Seal Kit, 3.150" Od, For 9" Ford (Part No.10058)

Tapered Axle Bearing And Seal Kit, 3.150" Od, For 9" Ford

from

$111.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Tapered axle bearing and seal kit, 3.150″ OD, for 9″ Ford. This axle bearing & seal kit services one side only.

Product Features:
  • Axle bearing and seal kit for Ford 9″ rear
  • Includes axle bearing and seal
  • Tapered roller design
  • 3.150″ O.D.
  • 1.562″ I.D.
  • Services one side
See More

FAG US – BEARING – CRB (Part No.102549)

BEARING - CRB

from

$64.99
BEARING – CRB

Yukon Gear – Replacement Yoke For Dana 30, 44, And 50 With 26 Spline And A 1350 U/Joint Size (Part No.41021)

Replacement Yoke For Dana 30, 44, And 50 With 26 Spline And A 1350 U/Joint Size

from

$289.99
Yukon replacement yoke for Dana 30, 44, and 50 with 26 spline and a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Dana Spicer 30 and 44
  • 26 spline
  • 1350 u-joint size
  • Outside snap ring design
  • 3.625″ snap ring span
  • 1.188″ cap diameter
  • Strap style
See More

Yukon Gear – 1.250" Pinion Adaptor Sleeve (Stock Pinion Into Large Support) (Part No.32239)

1.250" Pinion Adaptor Sleeve (Stock Pinion Into Large Support)

from

$74.99
1.250″ pinion adaptor sleeve (stock pinion into large support).

Product Features:
  • Adapter sleeve
  • Fits Ford 9″
  • Adapts 28 spline pinion into 35 spline pinion support
See More

Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-984)

Drive Shaft Repair Kit - Only Fits Dorman Driveshafts

from

$50.99
This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle.
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue.
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV11123)

CV Axle Shaft Assembly

from

$136.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

EMPI – Axle Shaft Nut (Part No.K4030200387EMP)

Axle Shaft Nut

from

$4.57
The EMPI Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Dorman – Axle Spindle Nut (Part No.K4030212888DOR)

Axle Spindle Nut

from

$3.93
Dorman’s Spindle Nut is manufactured for high corrosion resistance and a long service life. Depending on the application, it is also available in a kit that includes the nut, washer, and retainer.

Product Features:
  • Direct replacement for a proper fit every time
  • High quality steel construction
  • Conveniently available in many styles and in packs of different quantities
  • Dorman’s Spindle Nuts are constructed to strict engineering quality standards
See More

Cardone – Drive Shaft: Not Greasable, Direct Replacement (Part No.65-9445)

Drive Shaft: Not Greasable, Direct Replacement

from

$383.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.

Product Features:
  • Built to match O.E. form, fit and function.
  • 100% NEW universal joints are installed to ensure proper fit and optimal performance.
  • All slip yokes are lubricated to prevent premature wear.
  • Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
See More

Dorman – Rear Drive Shaft: Adjustable (Part No.946-747)

Rear Drive Shaft: Adjustable

from

$849.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

MOOG – Axle Support Bushing (Part No.K202054)

Axle Support Bushing

from

$20.29
Axle Support Bushing

Dorman – Axle Support Bushing (Part No.905-540)

Axle Support Bushing

from

$32.49
This axle support bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles.
  • Reliable fit – precision-engineered to match the design and dimensions of original components.
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Dorman – Help – Driveshaft Flange Bolts (Part No.80992)

Driveshaft Flange Bolts

from

$20.29
This drive shaft bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine mount bolt matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this drive shaft bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Rear Axle Differential Vent (Part No.924-263)

Rear Axle Differential Vent

from

$9.49
This axle vent is designed to match the fit and function of the original vent on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this axle vent is designed to match the fit and function of the original vent on specified vehicles.
  • Restores functionality – reliable replacement for an original vent that has failed due to blockage or fatigue.
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

1997 Ford F-150 Pickup Drive Shafts and Axles

Maybe you’re in the middle of a full rebuild of that 1997 Ford F-150 Pickup. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 62 different Drive Shafts and Axles in our inventory ranging from $3.93 to $1,123.99. That means you can find the exact parts or products you need to keep that 1997 Ford F-150 Pickup running smoothly.

Drive Shafts and Axles are only as good as their brand. We stock 18 different brands to make sure you have plenty of trusted parts to choose from for your 1997 Ford F-150 Pickup. Spicer, Carquest Premium, and Dorman are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Drive Shafts and Axles for your 1997 Ford F-150 Pickup, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 340 reviews in this category, some of the top rated parts include Universal Joint with 4.0 stars and Bearings with 5.0 stars.

So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 1997 Ford F-150 Pickup rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Drive Shafts and Axles Brands To Make Your 1997 Ford F-150 Pickup Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1997 Ford F-150 Pickup demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your F-150 Pickup the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.

Popular Dorman – Help Drive Shafts and Axles

We carry Dorman – Help parts in our stock across Drive Shaft Support Bolts and Axle Vents categories, plus more. For a 1997 Ford F-150 Pickup, our most popular Dorman – Help Drive Shafts and Axles include:
Driveshaft Flange Bolts
from $20.29
(1)
Driveshaft Flange Bolts
Drive Shaft Support Bolts
Rear Axle Differential Vent
from $9.49
(6)
Rear Axle Differential Vent
Axle Vents

Top 1997 Ford F-150 Pickup Drive Shafts and Axles from Carquest Premium

Carquest Premium products are another trusted brand when it comes to Drive Shafts and Axles for your 1997 Ford F-150 Pickup. Popular Carquest Premium parts include:
CV Axle Shaft Assembly
from $136.99
(41)
CV Axle Shaft Assembly
Drive Shaft and Axles

FAQs for 1997 Ford F-150 Pickup Drive Shafts and Axles

What are the most purchased Drive Shafts and Axles for the 1997 Ford F-150 Pickup?

Out of 62 Drive Shafts and Axles for the 1997 Ford F-150 Pickup, the most popular in our inventory are:
Universal Joint
from $42.99
(5)
Universal Joint
Axle Shaft Universal Joints
Center Support Bearing Motor Mount: Center, 1 Piece
from $22.79
(13)
Center Support Bearing Motor Mount: Center, 1 Piece
Center Support Bearings
Oil Seal
from $9.49
(7)
Oil Seal
Axle Shaft Seals

What are the top-rated 1997 Ford F-150 Pickup Drive Shafts and Axles?

Top-rated Drive Shafts and Axles for your 1997 Ford F-150 Pickup based on customer reviews/ratings are:
Universal Joint
from $44.99
(7)
Universal Joint
“Good product; easier to install; one bad thing is caps fall off easy, seems lite on greese”
Bearings
from $10.79
(2)
Bearings
“Perfect fit and worked appeared to match OEM quality.”