1997 Ford Expedition Suspension Parts

Below you will find various in-demand Ford Suspension Parts, components and accessories for your 1997 Expedition. Advance Auto Parts has popular Expedition parts like Coil and Leaf Springs, Control Arms, Trailing Arms and more. You’ll also find aftermarket and OEM Suspension Parts for other Expedition model years including 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 and more. Select a category of 1997 Ford Expedition Suspension Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1997 Ford Expedition Suspension Parts Categories

Shock Absorber and Coil Spring Assemblies

Rear Shock and Struts

Front Shock and Struts

Air-Coil Spring Conversion Kits

Active Suspension Relays

Front and Rear Shock or Strut Kits

Suspension Air Compressor Line Repair Kits

Lower Control Arms

Suspension Kits

Suspension Air Springs

Shock Conversion Kits

Lower Control Arm Bumpers

Air Suspension Helper Springs

Air Suspensions

Air Suspension Spring Sets

Trailing Arms

Suspension Complete Bushing Kits

Lower Control Arm Bushings

Coil Spring Insulators

Suspension Air Bag and Bellows

Suspension Air Compressor Isolators

Essential Suspension Parts for 1997 Ford Expeditions

from

$97.99

Made of superior Hyper-Flex material. Saves replacing again and again, lasting 3 to 10 times longer. Assemble to chassis the same way as OEM isolators and do not adversely change ride characteristics.

Product Features:

Made of Superior Hyper-Flex+ Material
Lasts from 3 to 10 Times Longer
Assemble to Chassis Same Way as OEM
Maintains Factory Ride Characteristics
Simple Way to Increase Vehicle Height

from

$117.99

SuspAirBag/Bellows

from

$21.99

Original equipment air suspension line unions crack and leak due to brittle plastic construction. This Dorman OE FIX solution directly replaces the original union and upgrades the material to brass for greater durability.

Product Features:

Upgraded replacement – this air suspension compressor line repair union directly replaces the original with stronger material
Increased durability – brass construction prevents future failures from original brittle plastic design
Application specific – this union is made for a wide range of Ford, Lincoln and Mercury vehicles
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$43.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Suspension Ride Height Switch enables drivers to adjust the vehicle’s ride height, improving handling and comfort while optimizing performance for various driving conditions. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$199.99

SuspAirSprngKt

from

$79.99

AirSpSolenoid

from

$189.99

This air suspension spring is designed to match the fit and function of the original spring on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this air suspension spring is designed to match the fit and function of the original spring on specified vehicle
Restores functionality – reliable replacement for an original part that has failed due to internal rubber components that have torn or rotted
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$499.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$109.99

SuspAirBag/Bellows

from

$249.99

Quick Strut Kit

from

$60.99

Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Bushings manufactured from high quality elastomer compounds for durability and ride performance
Assembled with proper precompression for ultimate in performance and feel

from

$29.99

At Suncore Industries, we will endeavor to provide High Quality & Reliability Air Suspension Products. Everything we do will encompass successfully addressing the need for exceptional Customer Satisfaction and Product Quality & Reliability. We understand how frustrating it can be to have a part not perform to expectations. We are mechanics and car owners too. Our mission is to provide you with the level of quality you deserve.

Product Features:

Includes Instructions
Lifetime Warranty

from

$47.99

This direct-replacement air compressor vibration isolator replaces worn rubber dampers that separate the compressor’s noise and vibration from the body. An easy fix to restore quiet, smooth operation.

Product Features:

Direct replacement – this air compressor vibration isolator matches original specifications for a perfect installation
Money-saving repair – replace only the worn air compressor isolator without changing the entire pump assembly
Simple fix – no special tools required to replace a worn or cracked original isolator
Vehicle tested – this vibration isolator has undergone on-vehicle testing to ensure proper fit and performance

from

$65.99

Engineered for passenger safety and rigorously tested for secure performance, this trailing arm was designed as a direct replacement for your vehicle’s original part. Industry-leading evaluation process ensures smooth ride and predictable handling.

Product Features:

Direct replacement – this suspension trailing arm fits and functions like the original equipment part
Quality construction – manufactured from same materials as original equipment for safety and reliability
Durable – protective finish for long-lasting corrosion resistance
Quality tested – has undergone testing to ensure proper fit and performance

from

$447.99

SuspAirBag/Bellows

from

$409.99

SUSP KIT

from

$119.99

Includes Instructions
Lifetime Warranty

from

$171.99

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$93.99

Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:

Nuts and Bolt: SAE Standard Grade
Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
Outer Tube: Long-lasting corrosion and rust protection.
Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

from

$176.99

Ideal for light trucks that that tow or carry varying loads, Monroe load adjusting shocks include a heavy gauge calibrated spring that adjusts to road and weight conditions to provide extra control when operating conditions get more demanding.

Product Features:

REDUCES SAG UNDER LOAD – Ideal for occasionally hauling or towing varying loads, heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission, see owner’s manual)
EXCEPTIONAL HANDLING – Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
LONGER SERVICE LIFE – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
Nitrogen Gas Charged: For Improved Ride & Handling, Helps Maintain Tire To Road Contact By Reducing Aeration – On Most Applications
5/8 nitrocarburized rod for long service life.
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

from

$101.99

Monroe Reflex struts feature ASD valving technology that automatically adjusts to absorb the impact, leaving the strut with greater control when it is needed. Monroe Reflex struts improve overall ride characteristics in all road conditions.

Product Features:

IMPROVES STABILITY – ASD (Acceleration Sensitive Damping) valving technology adjusts to impacts, reducing roll and dive for vehicles with a higher center of gravity
EXCEPTIONAL HANDLING – Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
CONTROL AND DURABILITY – Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
IMPROVES PERFORMANCE – Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration
CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
OPTIONAL DUST BOOT/JOUNCE BUMPER – Protective dust boot reduces dirt and moisture, while jounce bumper helps prevent severe suspension movement (both sold separately)
LONGER SERVICE LIFE – Bronze reinforced rod guide bearing and special single lip seal combined with hardened, chrome-plated piston rod provides durability and longer service life
BUY WITH CONFIDENCE – Comes with Monroe’s Limited Warranty and exclusive Feel the Difference

from

$102.99

Designed for midsize and full-size trucks and vans, Monroe Gas-Magnum shock absorbers provide firm control without a harsh ride. With up to twice the fluid capacity of standard 1-in. bore shocks, they work more efficiently with less effort.

Product Features:

DESIGNED FOR TRUCKS AND VANS – Engineered for hardworking full-size trucks and vans and features full-displaced valving on compression cycles to deliver controlled ride and handling
BUILT TO LAST – Heavy-duty nitrocarburized rod (non-dust shield units only) and sintered iron piston enhance durability for longer service life while self-lubricating fluid seal reduces friction against piston rod to reduce wear
CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
LONGER SERVICE LIFE – Larger bore and bigger 2-in. reserve tube work together to hold more oil for greater capacity to allow the shock to work efficiently for controlled ride and longer service life
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

from

$101.99

Product Features:

PRECISE HANDLING AND PERFORMANCE: Deflective Disc Valving features digressive, linear or progressive tuning based on application requirements for precision handling and performance on- and off-road
STRONG AND DURABLE: Features a 14mm hardened chrome piston rod to resist scuffs & corrosion, double-welded loops at stress areas, double strength closure method and hot form reserve tube
HANDLES EXTREME TEMPERATURE CHANGES: Large 2-in. monotube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 Deg. F
REDUCES FADE: Full-floating dividing piston and high-pressure nitrogen gas maintains constant pressure against the hydraulic oil, reducing aeration and shock fade
SMOOTH PERFORMANCE: Internal rebound bumper and shouldered rubber bushings help reduce noise, vibration and ride harshness while the PTFE-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
THE RIGHT FIT: Designed to fit right out of the box, application-specific mounting installs easily with no need for installing sleeves or extra hardware
KEEPS DIRT AND DEBRIS OUT: Sealing system with integrated dirt wiper helps keep moisture, dirt and debris from being ingested into the shock and contaminating the oil and destroying the internal seal
BUILT TO LAST: Large 46mm fluon-banded piston for consistent sealing between the piston and monotube for precise control, ride and handling; for extra protection, purchase shock boot RS1952 or RS1961
BOLD APPEARANCE: Black satin finish with distinctive Rancho red logo for an eye-catching look that stands out
BUY WITH CONFIDENCE: Comes with Rancho’s Limited Warranty

from

$227.99

Featuring a vehicle-specific design, Monroe Quick-Strut strut assemblies are fit checked, ride tested and engineered to restore factory ride height and ride performance. An all-in-one solution, the Monroe Quick-Strut strut assembly simplifies the installation process by including all the required components in a single unit. With a heritage of delivering leading-edge products for over 100 years, you can count on Monroe for your next repair.

Product Features:

QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
IMPROVES STEERING – Premium upper strut mount helps ensure smooth, “like-new” steering precision and prevents noise, vibration, harshness and memory steer
RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
ASSEMBLED IN THE USA – This Quick-Strut assembly is assembled with pride in Paragould, Arkansas from domestic and imported components
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee . Visit Monroe.com for details.

from

$415.99

This Arnott coil spring conversion kit was exclusively designed for Ford Expedition and Lincoln Navigator two-wheel drive (2WD) vehicles needing to replace the OE Shocks along with the air springs. This kit converts the rear air springs of the vehicle to a reliable coil spring suspension system. The kit features durable powder-coated, variable-rate coil springs designed to provide a softer, more comfortable ride when the vehicle is carrying a light load, but a firmer ride when the load increases. This kit also includes a pair of OE-equivalent replacement shocks.

Product Features:

Powder-Coated for Durability
Two OE-Equivalent Shocks
Detailed Installation Manual Available

from

$291.99

Convert a vehicle’s factory-equipped air suspension to a conventional suspension with a Monroe Suspension Conversion Kit. Includes premium components – application-tuned shock/strut, coil spring(s) and hardware.

Product Features:

PERFECT PAIRING – Purchase Monroe conversion kit part numbers 90023C1 and 90023C2 for a complete four-corner repair (each part number sold separately)
CONVERT YOUR RIDE – A cost effective alternative to replacing the OE system, this conversion kit converts a factory air suspension to a conventional suspension
COMPLETE SOLUTION – Includes premium-quality replacement components – application-tuned shock/strut, coil spring(s) and necessary mounting hardware
RESTORES OE SETTINGS – Restores factory ride height (where applicable) and delivers a stable, comfortable ride
EASY TO INSTALL – Engineered for superior fit and comes with detailed instructions for a complete and trouble-free bolt-on installation
KEEPS AIR SUSPENSION LIGHT OFF – A complete solution to keep the air suspension light off

from

$23.29

This suspension control arm bumper is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

Upgrade your 1997 Ford Expedition with Top-Quality Suspension Parts

When it comes to maintaining or upgrading your 1997 Ford Expedition, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Suspension Parts are key to keeping your Expedition functioning at its best. At Advance Auto Parts, we offer a wide selection of 93 Suspension Parts for the 1997 Ford Expedition, designed to meet your needs without breaking the bank. From Coil and Leaf Spring replacements to Control Arms upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Suspension Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Suspension Parts for your 1997 Ford Expedition at great prices. Our Suspension Parts inventory for this model ranges from just $21.29 to $1,043.00, with an average price of $150.47. Our 93 Suspension Parts in stock come from 14 trusted brands, so you’re sure to find the right part for your 1997 Ford Expedition without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1997 Ford Expedition, we stock popular OEM and aftermarket Suspension Parts from top names like Moog, Monroe, Rancho, and more. Moog Suspension Parts start at just $131.99 and boast an impressive 4.5 stars average rating from customers. Monroe and Rancho also bring quality to the table, with Suspension Parts available starting at $39.99, and at an average 4.4 stars rating. With 771 customer reviews and counting, our 1997 Ford Expedition Suspension Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Suspension Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1997 Ford Expedition is always ready to roll. We’re committed to providing you with everything you need to keep your Expedition in top shape, all in one place. Start shopping confidently below for your 1997 Ford Expedition!

Best-Selling Coil and Leaf Springs for 1997 Ford Expeditions

Enhance the driving experience in your Ford with 17 quality Coil and Leaf Spring components, starting at $23.29.

show more show less

from

$176.99

REDUCES SAG UNDER LOAD – Ideal for occasionally hauling or towing varying loads, heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission, see owner’s manual)
EXCEPTIONAL HANDLING – Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
LONGER SERVICE LIFE – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
Nitrogen Gas Charged: For Improved Ride & Handling, Helps Maintain Tire To Road Contact By Reducing Aeration – On Most Applications
5/8 nitrocarburized rod for long service life.
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

from

$23.29

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Protects spring and spring seat from damage
Replacement helps to reduce noise
Includes insulator and bearing

from

$164.99

Includes Instructions
Lifetime Warranty

from

$94.99

Lifetime Warranty
Made In The USA
Smooth Ride

from

$89.99

Includes Instructions
Lifetime Warranty

from

$329.99

Conversion Shock Kit

from

$637.99

Convert to a high-quality conventional suspension with this air spring to coil spring conversion kit. Corrosion-resistant steel springs maintain a smooth ride without the cost.

Product Features:

Alternative replacement – this air suspension delete kit replaces the original air suspension with a conventional suspension
Cost-saving solution – ideal for older vehicles on which maintaining the original air suspension isn’t necessary or too costly
Complete kit – includes all necessary hardware and components needed for conversion
Thoroughly tested – parts underwent ride handling testing to ensure performance

from

$97.99

Made of Superior Hyper-Flex+ Material
Lasts from 3 to 10 Times Longer
Assemble to Chassis Same Way as OEM
Maintains Factory Ride Characteristics
Simple Way to Increase Vehicle Height

from

$179.99

Lifetime Warranty
Made In The USA
Smooth Ride

from

$638.99

Convert to a high-quality conventional suspension with this air spring to coil spring conversion kit. Corrosion-resistant steel springs maintain a smooth ride without the cost.

Product Features:

Alternative replacement – this air suspension delete kit replaces the original air suspension with a conventional suspension
Cost-saving solution – ideal for older vehicles on which maintaining the original air suspension isn’t necessary or too costly
Complete kit – includes all necessary hardware and components needed for conversion
Thoroughly tested – parts underwent ride handling testing to ensure performance

from

$415.99

Powder-Coated for Durability
Two OE-Equivalent Shocks
Detailed Installation Manual Available

from

$397.99

This partial air-to-coil spring conversion kit replaces failed rear air springs with conventional steel springs. Cost-effectively restore a smooth ride by only replacing the parts necessary.

Product Features:

Alternative replacement – this air suspension delete kit replaces the original rear air springs with conventional coil springs
Cost-saving solution – ideal for older vehicles on which maintaining the original air suspension isn’t necessary or too costly
Thoroughly tested – parts underwent ride handling testing to ensure performance
Tech note – includes all necessary hardware and components needed to convert rear suspension; full 4-corner kit required to eliminate warning light

from

$207.99

PERFECT PAIRING – Purchase Monroe conversion kit part numbers 90005C1 and 90005C2 for a complete four-corner repair (each part number sold separately)
CONVERT YOUR RIDE – A cost effective alternative to replacing the OE system, this conversion kit converts a factory air suspension to a conventional suspension
COMPLETE SOLUTION – Includes premium-quality replacement components – application-tuned shock/strut, coil spring(s) and necessary mounting hardware
RESTORES OE SETTINGS – Restores factory ride height (where applicable) and delivers a stable, comfortable ride
EASY TO INSTALL – Engineered for superior fit and comes with detailed instructions for a complete and trouble-free bolt-on installation
KEEPS AIR SUSPENSION LIGHT OFF – A complete solution to keep the air suspension light off

from

$103.99

COMPLETESTRUTASSMBLY

from

$97.99

Made of Superior Hyper-Flex+ Material
Lasts from 3 to 10 Times Longer
Assemble to Chassis Same Way as OEM
Maintains Factory Ride Characteristics
Simple Way to Increase Vehicle Height

from

$93.99

Nuts and Bolt: SAE Standard Grade
Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
Outer Tube: Long-lasting corrosion and rust protection.
Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

from

$44.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Reduces vibration
Reduces road noise
UV resistant
No Squeak

Most Popular 1997 Ford Expedition Control Arms

Customize your Ford with 16 Control Arms products like Lower Control Arm Bushings, Lower Control Arms, and Lower Control Arm Bumpers, all priced under $779.99.

show more show less

from

$21.29

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Metal rib design helps lock the inner tube within frame pocket
Metal surfaces are phosphate coated for corrosion protection

from

$95.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$38.99

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Metal rib design helps lock the inner tube within frame pocket
Metal surfaces are phosphate coated for corrosion protection

from

$75.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$57.99

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Metal rib design helps lock the inner tube within frame pocket
Metal surfaces are phosphate coated for corrosion protection

from

$23.29

This suspension control arm bumper is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$171.99

For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$779.99

CONTROL ARM KIT

from

$76.99

CONTROL ARM BUSHING

from

$70.99

Reduces vibration
Torsional rubber bushings
UV resistant
No Squeak

from

$62.99

Reduces vibration
Torsional rubber bushings
UV resistant
No Squeak

from

$53.99

Control Arm Bushings – Lower

from

$53.99

Reduces vibration
Torsional rubber bushings
UV resistant
No Squeak

from

$44.99

Reduces vibration
Torsional rubber bushings
UV resistant
No Squeak

from

$39.99

This suspension control arm bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$34.99

This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment bushing on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

Top Picks for 1997 Ford Expedition Trailing Arms

Upgrade Ford Expeditions with top-quality Trailing Arms parts, including 2 OEM and aftermarket selections for your 1997 model.

show more show less

from

$131.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

ADDED CORROSION PROTECTIONá- Specially-engineered coatings are applied to metal surfaces toáinhibit premature deterioration caused by rain, snow, salt and road grime
PREMIUM BUSHINGS – Pre-installed with optimized stiffness to inhibit noise for a comfortable ride
EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
QUALITY ASSURANCEá-áLaser-etched ID provides visible assurance of genuine MOOG quality
Broad coverage for foreign and domestic applications

from

$85.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

ADDED CORROSION PROTECTIONá- Specially-engineered coatings are applied to metal surfaces toáinhibit premature deterioration caused by rain, snow, salt and road grime
PREMIUM BUSHINGS – Pre-installed with optimized stiffness to inhibit noise for a comfortable ride
EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
QUALITY ASSURANCEá-áLaser-etched ID provides visible assurance of genuine MOOG quality
Broad coverage for foreign and domestic applications

In-Demand Shocks and Struts for 1997 Ford Expeditions

Select from 29 premium Shocks and Struts parts for your 1997 Ford Expedition, with prices ranging from $39.99 to $149.99.

show more show less

from

$104.99

Designed to restore a vehicle’s original factory drivability and performance, Monroe OESpectrum light truck shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:

EXCEPTIONAL HANDLING – Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
CONTROL AND DURABILITY – PTFE-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
REDUCED NOISE, VIBRATION AND HARSHNESS – Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
5/8-inch (15.9 mm) diameter piston rod (On most applications)

from

$39.99

Gas-charged shock absorber that provides improved vehicle control for today’s light trucks, vans, full-size picks-ups and 4×4’s at an economical price.

Product Features:

Available for import and domestic trucks, vans, full-size pick-ups and 4×4’s
Gas-charged unit
Improved handling and control
Economical OE replacement
Meets OE product specifications

from

$77.99

DESIGNED FOR TRUCKS AND VANS – Engineered for hardworking full-size trucks and vans and features full-displaced valving on compression cycles to deliver controlled ride and handling
BUILT TO LAST – Heavy-duty nitrocarburized rod (non-dust shield units only) and sintered iron piston enhance durability for longer service life while self-lubricating fluid seal reduces friction against piston rod to reduce wear
CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
LONGER SERVICE LIFE – Larger bore and bigger 2-in. reserve tube work together to hold more oil for greater capacity to allow the shock to work efficiently for controlled ride and longer service life
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

from

$91.99

EXCEPTIONAL HANDLING – Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
CONTROL AND DURABILITY – PTFE-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
REDUCED NOISE, VIBRATION AND HARSHNESS – Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
5/8-inch (15.9 mm) diameter piston rod (On most applications)

from

$63.99

DESIGNED FOR TRUCKS AND VANS – Engineered for hardworking full-size trucks and vans and features full-displaced valving on compression cycles to deliver controlled ride and handling
BUILT TO LAST – Heavy-duty nitrocarburized rod (non-dust shield units only) and sintered iron piston enhance durability for longer service life while self-lubricating fluid seal reduces friction against piston rod to reduce wear
CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
LONGER SERVICE LIFE – Larger bore and bigger 2-in. reserve tube work together to hold more oil for greater capacity to allow the shock to work efficiently for controlled ride and longer service life
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

from

$77.99

EXCEPTIONAL HANDLING – Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
CONTROL AND DURABILITY – PTFE-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
REDUCED NOISE, VIBRATION AND HARSHNESS – Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
5/8-inch (15.9 mm) diameter piston rod (On most applications)

from

$77.99

EXCEPTIONAL HANDLING – Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
CONTROL AND DURABILITY – PTFE-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
REDUCED NOISE, VIBRATION AND HARSHNESS – Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
5/8-inch (15.9 mm) diameter piston rod (On most applications)

from

$60.99

Gas-charged shock absorber that provides improved vehicle control for today’s light trucks, vans, full-size picks-ups and 4×4’s at an economical price.

Product Features:

Available for import and domestic trucks, vans, full-size pick-ups and 4×4’s
Gas-charged unit
Improved handling and control
Economical OE replacement
Meets OE product specifications

from

$44.99

Gas-charged shock absorber that provides improved vehicle control for today’s light trucks, vans, full-size picks-ups and 4×4’s at an economical price.

Product Features:

Available for import and domestic trucks, vans, full-size pick-ups and 4×4’s
Gas-charged unit
Improved handling and control
Economical OE replacement
Meets OE product specifications

from

$102.99

DESIGNED FOR TRUCKS AND VANS – Engineered for hardworking full-size trucks and vans and features full-displaced valving on compression cycles to deliver controlled ride and handling
BUILT TO LAST – Heavy-duty nitrocarburized rod (non-dust shield units only) and sintered iron piston enhance durability for longer service life while self-lubricating fluid seal reduces friction against piston rod to reduce wear
CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
LONGER SERVICE LIFE – Larger bore and bigger 2-in. reserve tube work together to hold more oil for greater capacity to allow the shock to work efficiently for controlled ride and longer service life
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

from

$87.99

Ideal for vehicles with a higher center of gravity, Monroe Reflex light truck shock absorbers feature ASD valving technology that automatically adjusts the unit to absorb the impact, helping to reduce vehicle roll and dive.

Product Features:

IMPROVES STABILITY – ASD (Acceleration Sensitive Damping) valving technology adjusts to impacts, reducing roll and dive for vehicles with a higher center of gravity
EXCEPTIONAL HANDLING – Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown while larger reserve tube holds more fluid to run cooler
CONTROL AND DURABILITY – Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
IMPROVES PERFORMANCE – Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration
BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
5/8 inch Piston Rod: Heavy-duty nitrocarburized rod for long service life. On non-dust shield units only
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

from

$66.99

The shock that started it all! Rancho® RS5000 series has been the shock of choice for light trucks and sport utility vehicles since 1985. Available for stock and lifted applications, RS5000 is ideal for on and off-road use, at an affordable price. Covered by Rancho®’s limited warranty.

Product Features:

Ten-stage velocity sensitive valving – Provides tuning specific for each vehicle
5/8-in. (16mm) diameter piston rod (select applications) – Adds strength and durability. Size varies by application.
1 3/8-in. (35mm) diameter piston (select applications) – Ensures performance in any environment
Protective boot included – Protects the shock rod and oil seal
Limited Warranty – Guarantees your investment

from

$62.99

Monroe Gas-Matic truck shock absorber are gas charged and provide improved control at an economical price.

Product Features:

Available for import and domestic light trucks and vans
Gas-charged unit
Improved handling and control
Economical OE replacement
Meets OE product specifications

from

$90.99

Featuring a unique, exclusive valving system and advanced compression functionality, Rancho RS5000X shocks deliver improved overall on-road and off-road handling and performance.

Product Features:

IMPROVED HANDLING AND PERFORMANCE – Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road
MINIMIZES ROUGH RIDE – Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride
STRONG AND DURABLE – Features a 16mm nitro-carburized piston rod to resist scuffs & corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot
HANDLES EXTREME TEMPERATURE CHANGES – Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 degree F
SMOOTH PERFORMANCE – Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
REDUCES FADE – Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming
MAINTAINS VEHICLE CONTROL – Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control
BUILT TO LAST – Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area
BUY WITH CONFIDENCE – Comes with Rancho’s Limited Warranty

from

$108.99

EXCEPTIONAL HANDLING – Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
CONTROL AND DURABILITY – PTFE-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
REDUCED NOISE, VIBRATION AND HARSHNESS – Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
5/8-inch (15.9 mm) diameter piston rod (On most applications)

from

$64.99

Ride Comfort may be important, but restoring a vehicles Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicles original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.

Product Features:

KYB Recommended Orem Replacement Shock
The KYB Excel-G Helps Restore The Designed Control And Handling Of Your Full-Size Ford Truck
The KYB Excel-G Uses A Triple Lip Fluid Seal To Reduce The Chance Of Oil And Gas Leaking Out
Vehicle Specific, Hand Assembled, In-House Damping Valves Correctly Manage Tire Contact, Steering Response And Body Movement
Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Excel-G Helps Keep Electronic Safety Systems Performing As Designed.
KYB Has The Strongest And Thickest Strut Bodies And Brackets In The Industry; Minimizing Flex To Maintain Correct Alignment In All Conditions

from

$99.99

IMPROVED HANDLING AND PERFORMANCE – Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road
MINIMIZES ROUGH RIDE – Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride
STRONG AND DURABLE – Features a 16mm nitro-carburized piston rod to resist scuffs & corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot
HANDLES EXTREME TEMPERATURE CHANGES – Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 degree F
SMOOTH PERFORMANCE – Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
REDUCES FADE – Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming
MAINTAINS VEHICLE CONTROL – Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control
BUILT TO LAST – Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area
BUY WITH CONFIDENCE – Comes with Rancho’s Limited Warranty

from

$101.99

IMPROVED HANDLING AND PERFORMANCE – Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road
MINIMIZES ROUGH RIDE – Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride
STRONG AND DURABLE – Features a 16mm nitro-carburized piston rod to resist scuffs & corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot
HANDLES EXTREME TEMPERATURE CHANGES – Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 degree F
SMOOTH PERFORMANCE – Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
REDUCES FADE – Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming
MAINTAINS VEHICLE CONTROL – Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control
BUILT TO LAST – Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area
BUY WITH CONFIDENCE – Comes with Rancho’s Limited Warranty

from

$86.99

IMPROVES STABILITY – ASD (Acceleration Sensitive Damping) valving technology adjusts to impacts, reducing roll and dive for vehicles with a higher center of gravity
EXCEPTIONAL HANDLING – Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown while larger reserve tube holds more fluid to run cooler
CONTROL AND DURABILITY – Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
IMPROVES PERFORMANCE – Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration
BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
5/8 inch Piston Rod: Heavy-duty nitrocarburized rod for long service life. On non-dust shield units only
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

from

$95.99

Featuring a unique, exclusive valving system and advanced compression functionality, Rancho RS5000X shocks deliver improved overall on- and off-road handling and performance.

Product Features:

IMPROVED HANDLING AND PERFORMANCE – Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road
MINIMIZES ROUGH RIDE – Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride
STRONG AND DURABLE – Features a 16mm nitro-carburized piston rod to resist scuffs & corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot
HANDLES EXTREME TEMPERATURE CHANGES – Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 Deg. F
SMOOTH PERFORMANCE – Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
REDUCES FADE – Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming
MAINTAINS VEHICLE CONTROL – Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control
BUILT TO LAST – Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area
BUY WITH CONFIDENCE – Comes with Rancho’s Limited Warranty

from

$81.99

Featuring a unique, exclusive valving system and advanced compression functionality, Rancho RS5000X shocks deliver improved overall on- and off-road handling and performance.

Product Features:

IMPROVED HANDLING AND PERFORMANCE – Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road
MINIMIZES ROUGH RIDE – Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride
STRONG AND DURABLE – Features a 16mm nitro-carburized piston rod to resist scuffs & corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot
HANDLES EXTREME TEMPERATURE CHANGES – Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 Deg. F
SMOOTH PERFORMANCE – Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
REDUCES FADE – Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming
MAINTAINS VEHICLE CONTROL – Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control
BUILT TO LAST – Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area
BUY WITH CONFIDENCE – Comes with Rancho’s Limited Warranty

from

$95.99

Featuring a unique, exclusive valving system and advanced compression functionality, Rancho RS5000X shocks deliver improved overall on- and off-road handling and performance.

Product Features:

IMPROVED HANDLING AND PERFORMANCE – Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road
MINIMIZES ROUGH RIDE – Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride
STRONG AND DURABLE – Features a 16mm nitro-carburized piston rod to resist scuffs & corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot
HANDLES EXTREME TEMPERATURE CHANGES – Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 Deg. F
SMOOTH PERFORMANCE – Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
REDUCES FADE – Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming
MAINTAINS VEHICLE CONTROL – Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control
BUILT TO LAST – Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area
BUY WITH CONFIDENCE – Comes with Rancho’s Limited Warranty

from

$149.99

Get premium control and performance with Rancho RS9000XL shocks. Recognized as the first nine-position manually adjustable ride control series in the off-road market, RS9000XL shocks are ideal for on-road and off-road use, towing and more.

Product Features:

NINE LEVELS OF PERFORMANCE – Nine-position easy-to-adjust knob allows customized damping control and firmness for on-road and off-road flexibility
DESIGNED FOR HARDWORKING VEHICLES – Ideal for stock or lifted trucks, SUVs and Jeeps that tow, haul or go off road
INDUSTRY FIRST – Recognized as the first nine-position manually adjustable shock series in the off-road market
REDUCES FADE – Nitrogen gas pressurized to 120 PSI to minimize air-to-oil mixture and reduce damping performance fade and foaming
STRONG AND DURABLE – Features an application-specific 18mm nitro-carburized piston rod to resist scuffs and corrosion, double-welded loops at stress areas and 1.25-in. sintered iron piston for enhanced structural integrity
HANDLES EXTREME TEMPERATURE CHANGES – Up to 2.75-in. tri-tube body (application specific) filled with all-weather fluid allows for cooler operation.
SMOOTH PERFORMANCE – Polyurethane rebound bumper and bushings and graphite-filled fluon-banded piston help absorb ride harshness and enhance responsiveness to changing road conditions for an overall smoother ride
BUILT TO LAST – Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the long-lasting premium liquid metallic finish and polyvinyl protective boot ensures longer life
BUY WITH CONFIDENCE – Comes with Rancho’s Limited Warranty

from

$90.99

KYB Recommended Orem Replacement Shock
The KYB Excel-G Helps Restore The Designed Control And Handling Of Your Full-Size Ford Truck
The KYB Excel-G Uses A Triple Lip Fluid Seal To Reduce The Chance Of Oil And Gas Leaking Out
Vehicle Specific, Hand Assembled, In-House Damping Valves Correctly Manage Tire Contact, Steering Response And Body Movement
Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Excel-G Helps Keep Electronic Safety Systems Performing As Designed.
KYB Has The Strongest And Thickest Strut Bodies And Brackets In The Industry; Minimizing Flex To Maintain Correct Alignment In All Conditions

Most Sold 1997 Ford Expedition Air Suspension and Kits

Explore our best-selling Ford parts for the 1997 Expedition among 29 OEM and aftermarket options starting from $21.99.

show more show less

from

$119.99

Includes Instructions
Lifetime Warranty

from

$59.99

Air Bellow Produced For Suncore By Goodyear
Lifetime Warranty
Includes O-Rings
Includes Instructions

from

$59.99

Air Bellow Produced For Suncore By Goodyear
Lifetime Warranty
Includes O-Rings
Includes Instructions

from

$21.99

Upgraded replacement – this air suspension compressor line repair union directly replaces the original with stronger material
Increased durability – brass construction prevents future failures from original brittle plastic design
Application specific – this union is made for a wide range of Ford, Lincoln and Mercury vehicles
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$117.99

SuspAirBag/Bellows

from

$159.99

Air Bellow Produced For Suncore By Goodyear
Lifetime Warranty
Includes O-Rings
Includes Instructions

from

$180.99

This air suspension spring is designed to match the fit and function of the original spring on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this air suspension spring is designed to match the fit and function of the original spring on specified vehicle
Restores functionality – reliable replacement for an original part that has failed due to internal rubber components that have torn or rotted
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$139.99

Air Bellow Produced For Suncore By Goodyear
Lifetime Warranty
Includes O-Rings
Includes Instructions

from

$189.99

This air suspension spring is designed to match the fit and function of the original spring on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this air suspension spring is designed to match the fit and function of the original spring on specified vehicle
Restores functionality – reliable replacement for an original part that has failed due to internal rubber components that have torn or rotted
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$194.99

SuspAirSprngKt

from

$109.99

SuspAirBag/Bellows

from

$59.99

Shock Kit

from

$39.99

This suspension solenoid is designed to match the fit and function of the original solenoid on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this suspension solenoid is designed to match the fit and function of the original solenoid on specified vehicles
Ideal solution – this solenoid is a reliable replacement for an original part that is damaged or has failed due to fatigue, excessive heat or electrical current
Durable construction – this solenoid is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$59.99

Shock Kit

from

$1043.00

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
Provides An Instant Air Source For The Air Helper Springs Or Accessories
Dual Point Fill (Both Air Springs Fill Independently Of Each Other)

from

$703.99

Our Air Command systems give customers the ability to conveniently adjust their air springs with the touch of a button thanks to our Air Command Air Compressor Kits. Our designs provide an instant air source to a vehicle air suspension system, giving users the freedom to adjust their air springs to accommodate different loads and road conditions from both inside and outside of the vehicle.

Product Features:

The Easy To Read Digital Display Is Designed So You Can See It During The Day, But It Does Not Blind You At Night
The Wireless Remote Utilizes A New Sleep Cycle And LED Display That Reduces Energy Use And Improves Battery Life
Easy Installation

from

$589.99

With over 40 years of history, Nolathane remains the number 1 replacement and enhancement bushing and chassis component brand throughout Australia & New Zealand and now boasts a warehouse in California & catalog to suit the North American market.

Product Features:

Kit Contains: 62 bushings, 20 Tubes, 4 Bolts, 4 Nuts, 12 Washers, Grease, Install Guide

from

$409.99

SUSP KIT

from

$407.99

SUSP KIT

from

$226.99

SUSP KIT

from

$199.99

SuspAirSprngKt

from

$172.99

Arnott Air Springs are engineered in our Research and Development Center and then undergo extensive lab and vehicle road-testing to assure product standards and quality. Arnott springs feature state-of-the art, multi-ply air sleeves manufactured by industry-leading rubber companies such as ContiTech and Goodyear. Arnott springs are assembled, tested, and packaged in Arnott’s American and EU facilities using ISO-certified quality management principles. Arnott Air Springs last longer, are easier to install, and provide unparalleled ride comfort and durability.

Product Features:

Exclusively for Ford Expedition (UN93)and Lincoln Navigator (UN173) 4WD
Multi-ply Continental ContiTech air sleeve
Heavy-duty crimping rings
Burst pressure tested to over 480 PSI – 6x normal working pressure
High impact resin upper and lower mounts
Designed to precise spring rate and load capabilities set by the OE
Prevents sagging and uneven suspension, restoring the original comfortable ride
Replace in pairs

from

$171.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$79.99

AirSpSolenoid

Top-Rated Suspension Parts Brands For Your 1997 Ford Expedition

Shop for the best-rated brands offering Suspension Parts and other products for your 1997 Ford Expeditions. Below you’ll find some of our best rated Suspension Parts from Moog, Monroe, and Rancho, and more. Suspension Parts from these brands that fit a 1997 Expedition start at just $39.99 and are rated as high as 4.5 stars. OEM and aftermarket Suspension Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Moog 1997 Ford Expedition Suspension Parts

When it comes to maintaining or upgrading your 1997 Ford Expedition, using quality Suspension Parts is essential to ensure durability and a perfect fit. Moog ticks all of those boxes. We offer a wide selection of Moog Suspension Parts, specifically designed for the 1997 Ford Expedition. With over 1 Moog brand Suspension Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $131.99. Plus, with over 1 customer reviews and an average rating of 4.5 stars, you can trust that our Moog Suspension Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $131.99

(1)

Suspension Trailing Arm

“Had to drill the holes bigger but it works now”

Popular Monroe 1997 Ford Expedition Suspension Parts

Monroe auto parts is one of the highest quality Suspension Part brands in the market. Any 1997 Ford Expedition owner should feel confident when installing genuine Monroe parts in their vehicle. To ensure the best fit and performance for your 1997 Expedition, Advance Auto Parts carries a full inventory of 3 Monroe Suspension Parts. Plus you will be keeping your Ford in peak condition while saving money because prices on these Monroe Suspension Parts range from $39.99 to $104.99, plus, with more than 20 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Suspension Parts below will deliver on both quality and value.

from $39.99

(4)

Gas-Matic LT Suspension Shock Absorber

“great product for a good price. install went nice and smooth and i definetly noticed a difference in the smoothness of the ride in my expedition.”

from $104.99

(12)

OESpectrum Suspension Shock Absorber

“Really helped the handling on my truck”

from $77.99

(4)

Gas-Magnum Suspension Shock Absorber

“lot’s of bang for the buck”

FAQs for 1997 Ford Expedition Suspension Parts

Which Suspension Parts are best-sellers for 1997 Ford Expeditions?

Out of 93 Suspension Parts that fit 1997 Ford Expeditions, the following parts are the top sellers:

Gas-Matic Suspension Shock Absorber (15530003) – $62.99
Suspension Shock Absorber RS5000X (11451103) – $90.99
Suspension Shock Absorber RS5000X (11848196) – $99.99

What’s the price range for 1997 Ford Expedition Suspension Parts?

Suspension Part prices for the 1997 Ford Expedition start at $21.29 and go up to $1,043.00 for the most premium parts.

What’s the average price of a Suspension Part for a 1997 Ford Expedition?

The average price for Suspension Parts for the 1997 Ford Expedition is $150.47. Keep in mind the variety of part types within our Suspension Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Suspension Parts for other Ford Expedition model years?

Yes, we currently carry Suspension Parts for 26 model years of Ford Expeditions between 1998 and 2024. Suspension Parts are bought most frequently for the following model years: 2023, 2024, 2022, 2021, 2020, 2019, 2018, 2017, and 2016.

What are the cheapest Suspension Parts for my 1997 Ford Expedition?

The cheapest 1997 Ford Expedition Suspension Parts we carry in stock are:

Suspension Control Arm Bushing Kit (20517119) – $21.29
Air Suspension Line Repair Union (OE Fix) (11692511) – $21.99
Coil Spring Insulator (21880795) – $23.29
Suspension Control Arm (11197933) – $23.29
Air Strut Assembly (10142857) – $29.99

What are the top-rated Suspension Parts that fit the 1997 Ford Expedition?

Out of 771 reviews by customers, our 1997 Ford Expedition Suspension Parts have an average customer rating of . These are some of the highest-rated Suspension Part types for the 1997 Ford Expedition and their top-rated products:

Coil and Leaf Springs
- Load Adjusting Rear Suspension Shock Absorber and Coil Spring Assembly (19710036) – $176.99
Trailing Arms
- Load Adjusting Rear Suspension Shock Absorber and Coil Spring Assembly (19710036) – $176.99
Control Arms
- Load Adjusting Rear Suspension Shock Absorber and Coil Spring Assembly (19710036) – $176.99

What types of Suspension Parts do you sell for my 1997 Ford Expedition?

As of 3/1/26, these are some of the most in-demand types of Suspension Parts for a 1997 Ford Expedition:

Can I get help with 1997 Ford Expedition Suspension Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Suspension Parts and more.

What is your return policy for Ford Expedition Suspension Parts?

Advance Auto Parts keeps returns simple. For new Ford Expedition Suspension Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1997 Ford Expedition Suspension Parts

Energy Suspension – Coil Spring Isolator Set (Part No.4.6106R)

Suncore – SuspAirBag/Bellows (Part No.53F-15-4X4-PAIR)

Dorman – Air Suspension Line Repair Union (OE Fix) (Part No.949-210)

Carquest Premium – Suspension Ride Height Switch (Part No.SBA1357)

Suncore – SuspAirSprngKt (Part No.53F-15-45-4-KIT)

Suncore – AirSpSolenoid (Part No.F-45-3-PAIR)

Dorman – Air Suspension Air Spring with Hardware (Part No.949-252)

Dorman – Suspension Control Arm (Part No.521-915)

Suncore – SuspAirBag/Bellows (Part No.53F-15-4X2-PAIR)

Suncore – Quick Strut Kit (Part No.2-55S11900-001)

MOOG – Suspension Control Arm Bushing (Part No.K201189)

Suncore – Air Strut Assembly (Part No.53F-12-R-4)

Dorman – Compressor Vibration Isolator Kit with Steel Bushing (Part No.949-794)

Dorman – Suspension Control Arm (Part No.524-278)

Suncore – SuspAirBag/Bellows (Part No.61F-15-HD-PAIR)

Dorman – SUSP KIT (Part No.541-085)

Suncore – Air Suspension Conversion Kit (Part No.53F-30-F)

Carquest Premium – Multi-Purpose Relay (Part No.RAC1293)

Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.28-920935)

Monroe – Load Adjusting Rear Suspension Shock Absorber and Coil Spring Assembly (Part No.58633)

Monroe – Reflex Suspension Strut (Part No.71369)

Monroe – Gas-Magnum Suspension Shock Absorber (Part No.34655)

Rancho – RS7MT Suspension Shock Absorber (Part No.RS77118)

Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.171370)

Arnott Air Suspension – Coil Spring Conversion Kit (Part No.C-2607)

Monroe – Air Spring to Coil Spring Conversion Kit (Part No.90023C2)

Dorman – Suspension Control Arm (Part No.523-087)

Monroe – Load Adjusting Rear Suspension Shock Absorber and Coil Spring Assembly (Part No.58633)

MOOG – Coil Spring Insulator (Part No.K160063)

Suncore – Air Suspension Conversion Kit (Part No.53F-30-R-KIT)

Suncore – Heavy Duty Air Suspension Conversion Kit (Part No.53F-30-HD)

Suncore – Air Suspension Conversion Kit (Part No.53F-30-R)

Suncore – Conversion Shock Kit (Part No.53F-30-4-KIT)

Dorman – Air Suspension Delete Kit with Hardware (Part No.949-566)

Energy Suspension – Coil Spring Isolator Set (Part No.4.6106G)

Suncore – Heavy Duty Air Suspension Conversion Kit (Part No.53F-30-HD-KIT)

Dorman – Air Suspension Delete Kit with Hardware (Part No.949-572)

Arnott Air Suspension – Coil Spring Conversion Kit (Part No.C-2607)

Dorman – Air Suspension Conversion Kit (Part No.949-525)

Monroe – Front and Rear Air Spring to Coil Spring Conversion Kit (Part No.90005C1)

PRT – COMPLETESTRUTASSMBLY (Part No.920935)

Energy Suspension – Coil Spring Isolator Set (Part No.4.6106R)

Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.28-920935)

Rare Parts – Coil Spring Insulator (Part No.RP46337)

MOOG – Suspension Control Arm Bushing Kit (Part No.K8721)

Dorman – Suspension Trailing Arm (Part No.523-245)

MOOG – Suspension Control Arm Bushing Kit (Part No.K8764)

Dorman – Suspension Trailing Arm (Part No.523-244)

MOOG – Suspension Control Arm Bushing Kit (Part No.K8765)

Dorman – Suspension Control Arm (Part No.523-087)

Energy Suspension – Control Arm Bushing Set (Part No.4.3145G)

Dorman – CONTROL ARM KIT (Part No.541-084)

Rare Parts – CONTROL ARM BUSHING (Part No.RP18162)

Rare Parts – Control Arm Bushing (Part No.RP18155)

Rare Parts – Control Arm Bush (Part No.RP18777)

Rare Parts – Control Arm Bushings – Lower (Part No.RP18163)

Rare Parts – Control Arm Bushing (Part No.RP18776)

Rare Parts – Control Arm Bushing (Part No.RP19372)

Dorman – Suspension Control Arm Bushing Kit (Part No.533-591)

Dorman – Suspension Control Arm Bushing (Part No.533-928)

MOOG – Suspension Trailing Arm (Part No.RK642058)

MOOG – Suspension Trailing Arm (Part No.RK642057)

Monroe – OESpectrum Suspension Shock Absorber (Part No.37133)

Monroe – Gas-Matic LT Suspension Shock Absorber (Part No.59586)

Monroe – Gas-Magnum Suspension Shock Absorber (Part No.34657)

Monroe – OESpectrum Suspension Shock Absorber (Part No.37202)

Monroe – Gas-Magnum Suspension Shock Absorber (Part No.34672)

Monroe – OESpectrum Suspension Shock Absorber (Part No.37144)

Monroe – OESpectrum Suspension Shock Absorber (Part No.37145)

Monroe – Gas-Matic LT Suspension Shock Absorber (Part No.59501)

Monroe – Gas-Matic LT Suspension Shock Absorber (Part No.59503)

Monroe – Gas-Magnum Suspension Shock Absorber (Part No.34655)

Monroe – Reflex Suspension Shock Absorber (Part No.911131)

Rancho – RS5000 Shock Absorber (Part No.RS5233)

Monroe – Gas-Matic Suspension Shock Absorber (Part No.59048)

Rancho – Suspension Shock Absorber RS5000X (Part No.RS55118)

Monroe – OESpectrum Suspension Shock Absorber (Part No.37131)

KYB – Gas Shock (Part No.344368)

Rancho – Suspension Shock Absorber RS5000X (Part No.RS55112)