1997 Ford E-150 Econoline Intake Manifold Parts
More 1997 Ford E-150 Econoline Intake Manifold Parts
Find your specific 1997 Ford E-150 Econoline original or aftermarket Intake Manifold Parts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1997 Ford E-150 Econoline Intake Manifold Parts
Dorman – Intake Manifold Runner Control Valve (Part No.B1220422581DOR)
from
$189.03
Save time, money and labor with Dorman’s Intake Manifold Runner Control Valve. Now you can replace only the part, instead of the entire Intake Manifold. Replacement restores fuel efficiency, eliminates stuttering, and enables your vehicle to start and run reliably again.
Product Features:
See More
Product Features:
- Replacement returns vehicle to proper operation
- Direct replacement for a proper fit every time
- Durable construction for a long service life
- Easy to install
Dorman – Intake Manifold Runner Control Valve (Part No.B1220422580DOR)
from
$259.82
Save time, money and labor with Dorman’s Intake Manifold Runner Control Valve. Now you can replace only the part, instead of the entire Intake Manifold. Replacement restores fuel efficiency, eliminates stuttering, and enables your vehicle to start and run reliably again.
Product Features:
See More
Product Features:
- Replacement returns vehicle to proper operation
- Direct replacement for a proper fit every time
- Durable construction for a long service life
- Easy to install
Dorman – Intake Manifold Runner Control Left (Part No.911-101)
from
$123.99
This intake manifold runner control (IMRC) vacuum control motor matches the fit and function of the original and is designed replace a damaged or failed motor to help ensure proper engine operation and fuel economy on specified vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this intake manifold runner control (IMRC) vacuum control motor matches the fit and function of the original part on specified vehicle years, makes and models
- Ideal solution – reliable replacement for an original part that has failed due to fatigue, contaminants or internal component malfunction
- Durable construction – made of quality materials for reliable service
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Rubber Expansion Plug 1-5/8 In. – Size Range 1-5/8 In. – 1-3/4 In. (Part No.10232)
from
$4.29
Our Engine Intake Manifold Expansion Plug is conveniently designed as a direct replacement for stripped plugs. A proper fit is ensured, every time.
Product Features:
See More
Product Features:
- Manufactured from high quality materials for a long service life
- Torque values listed on parts (where applicable)
- Easy to install
- Constructed to strict engineering quality standards
Dorman – Rubber Expansion Plug 1-5/8 In. – Size Range 1-5/8 In. – 1-3/4 In. (Part No.02604)
from
$6.99
Our Engine Intake Manifold Expansion Plug is conveniently designed as a direct replacement for stripped plugs. A proper fit is ensured, every time.
Product Features:
See More
Product Features:
- Manufactured from high quality materials for a long service life
- Torque values listed on parts (where applicable)
- Easy to install
- Constructed to strict engineering quality standards
Dorman – Rubber Expansion Plug 1-5/8 In. – Size Range 1-5/8 In. – 1-3/4 In. (sold by each) (Part No.570-010)
from
$4.49
This engine intake manifold expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine intake manifold expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Pik-a-Nut – Steel Cup Expansion Plug 1-41/64 In., Height 0.360 (Part No.362660.1)
from
$2.29
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Vacuum Retainer Bushings (Part No.47099)
from
$9.99
This engine intake manifold vacuum retainer bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine intake manifold vacuum retainer bushing matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Felpro – INTAKE MANIFOLD GASKET SET (Part No.MS 94951)
from
$31.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 98010 T-1)
from
$121.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- STRONG AND DURABLE — Features molded rubber over an aluminized steel carrier which resists high heat and coolants
- SUPERIOR SEAL — Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
- EASIER TO INSTALL — Locating tabs assure proper alignment and easier installation
- PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Dorman – Upper Intake Manifold Gasket Set: 15 Piece Set (Part No.615-188G)
from
$65.99
This engine intake manifold gasket set is designed to match the original gaskets required to reseal and restore proper function to the intake manifold on specified vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this engine intake manifold gasket set is designed to match the original gaskets required to reseal and restore proper function to the intake manifold on specified vehicles
- Restores functionality – this gasket set is made to fit and fully restore part functionality after the original gasket fails
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Felpro – INTAKE MANIFOLD GASKET SET (Part No.MS 92121-2)
from
$72.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 98008 T-3)
from
$102.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- STRONG AND DURABLE — Features molded rubber over an aluminized steel carrier which resists high heat and coolants
- SUPERIOR SEAL — Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
- EASIER TO INSTALL — Locating tabs assure proper alignment and easier installation
- PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Dorman – Intake Manifold Bolt (Part No.B1217751293DOR)
from
$41.12
Intake Manifold Bolt
Edelbrock – Single-Quad Manifold and carb Kit for Small-Block Ford 289-302 (Part No.2033)
from
$1053.99
The Edelbrock #2033 Single-Quad Manifold and carb kit is designed for Small-Block Ford 289-302 applications. With a Manifold and Carb Kit, it’s easy to upgrade your induction system with the best combination of Edelbrock proven performance and looks in a
Product Features:
See More
Product Features:
- Satin Finish
- Single-Quad Manifold
- Thunder Series AVS2 800 cfm Carb
- RPM Air-Gap Manifold
- Made In The USA
Dorman – Plastic Intake Manifold – Includes Gaskets (Part No.615-188)
from
$231.99
If you need to swap out the intake manifold on select Ford trucks, SUVs or vans, this proven replacement is the best solution. It’s made in the USA to deliver reliable quality that matches the fit, function and performance of the original. It has several smart features, such as integrated gaskets that sit in the manifold, rather than the carrier gasket design of the factory unit, reducing contact points with the head to help prevent potential air leaks. The complete kit includes the tough polymer manifold, auxiliary coolant fitting, thermostat, specially designed gaskets, O-ring and self-tapping screws. It also has an integrated PCV nipple to ensure proper vacuum, an updated thermostat design to prevent coolant leaks, and a clamp to keep the coolant block off cap in place. Don’t waste money going back to the dealership, and don’t waste time with an aftermarket imitator that isn’t up to the job. Fix your manifold issues with this reliable replacement.
Product Features:
See More
Product Features:
- Ideal replacement – this intake manifold is engineered to reliably replace the original equipment manifold on select Ford vehicles with 5.4L V8 engines
- Made in USA – designed, engineered and manufactured in the United States to deliver consistent quality and precise construction
- Proven design – features multiple improvements that make it look slightly different than the factory design but still match factory fit and performance
- Complete kit – includes manifold, auxiliary coolant fitting, thermostat, specially designed gaskets, O-ring and self-tapping screws
Dorman – Upper Plastic Intake Manifold – Includes Gaskets (Part No.615-278)
from
$393.99
This engine intake manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It is thoroughly tested to ensure top-quality OEM construction and superior reliability.
Product Features:
See More
Product Features:
- Upper Plastic Intake Manifold – Includes Gaskets
- Upper Plastic Intake Manifold – Includes Gaskets
- This engine intake manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It is thoroughly tested to ensure top-quality OEM construction and superior reliability.
- Ideal replacement – this intake manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
- Reliable construction – tested to ensure top-quality OEM performance and durability
Edelbrock – RPM Dual-Quad manifold and carb Kit for Small-Block Ford 289-302 (Part No.2035)
from
$1796.99
Varying manifold and carburetor combinations. Suits engines air and fuel requirements. High quality Edelbrock intake gasket set. Includes gasgacinch gasket sealer. All necessary hardware included. Resists discoloration from heat. Available in cast, polish
Product Features:
See More
Product Features:
- Varying Manifold And Carburetor Combinations
- Suits Engines Air/Fuel Requirements
- Chrome Fuel Inlet
- High-Quality Edelbrock Intake Gasket Set
- Includes Gasgacinch Gasket Sealer
- All Necessary Hardware Included
- EnduraShine Finish
- Resists Discoloration From Heat
Autotecnica – Intake Manifold (Part No.B12001892915ANA)
from
$314.27
Intake Manifold
Dorman – Intake Manifold (Part No.B1200700407DOR)
from
$979.48
Our growing category of intake manifolds offers leading application coverage for today’s most in-demand vehicles. Additionally, our intake manifolds are Dorman-engineered, for increased durability and proper performance. Since this part is a direct replacement, the exact fit adds another layer of efficiency and convenience.
Product Features:
See More
Product Features:
- Re-engineered by Dorman with heat-resistant polymers to reduce both warping and coolant leaks (where applicable)
- Some manifolds feature a reinforced aluminum coolant crossover to eliminate corrosion and vibration (where applicable)
- Reinforced EGR and coolant passage walls for increased manifold durability (where applicable)
- Torque specifications and bolt tightening sequence are provided for easier installation (where applicable)
Edelbrock – Performer 289 Intake Manifold for Small-Block Ford, Black Finish (Part No.21213)
from
$442.99
Edelbrock part #21213 Performer 289 intake manifold is designed for street 260-289-302 c.i.d. Ford V8’s without EGR. Will not fit Boss 302 or 255 c.i.d. V8’s. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket
Product Features:
See More
Product Features:
- Idle-5500 RPM Range
- Dual Plane Type-4150 Style Flange
- 3.5 in. Front Height, 4.12 in. Center Height, 4.75 in. Rear Height
- Black Powder Coated Finish
- Made In The USA
Carquest – Air Charge Temperature Sensor (Part No.31A1019)
from
$22.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to
See More
Carquest Premium – Air Charge Temperature Sensor (Part No.WTA1064)
from
$27.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Popular 1997 Ford E-150 Econoline Intake Manifold Parts Categories
1997 Ford E-150 Econoline Intake Manifold Parts
Maybe you’re in the middle of a full rebuild of that 1997 Ford E-150 Econoline. Maybe you just need a couple of Intake Manifold Parts. Either way, Advance Auto Parts has 25 different Intake Manifold Parts in our inventory ranging from $2.29 to $979.48. That means you can find the exact parts or products you need to keep that 1997 Ford E-150 Econoline running smoothly.
Intake Manifold Parts are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 1997 Ford E-150 Econoline. Dorman, Felpro, and Carquest are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Intake Manifold Parts for your 1997 Ford E-150 Econoline, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 72 reviews in this category, some of the top rated parts include Rubber Expansion Plug 1-5/8 In. – Size Range 1-5/8 In. – 1-3/4 In. with 3.0 stars.
So if you’re in the market for aftermarket Intake Manifold Parts to keep your 1997 Ford E-150 Econoline rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Intake Manifold Parts Brands To Make Your 1997 Ford E-150 Econoline Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1997 Ford E-150 Econoline demands trusted brand parts and products to keep it running. Many trusted brands of Intake Manifold Parts make up Advance Auto Parts’ inventory, and all are ready to help make your E-150 Econoline the best it can be. Be sure to browse some of our top Intake Manifold Parts brands and parts.
Popular Felpro Intake Manifold Parts
We carry Felpro parts in our stock across Intake Manifold Gasket Sets categories, plus more. For a 1997 Ford E-150 Econoline, our most popular Felpro Intake Manifold Parts include:
Top 1997 Ford E-150 Econoline Intake Manifold Parts from Dorman – Help
Dorman – Help products are another trusted brand when it comes to Intake Manifold Parts for your 1997 Ford E-150 Econoline. Popular Dorman – Help parts include:
from
$6.99
(4)
Rubber Expansion Plug 1-5/8 In. – Size Range 1-5/8 In. – 1-3/4 In.
Intake Manifold Expansion Plugs
FAQs for 1997 Ford E-150 Econoline Intake Manifold Parts
What are the most purchased Intake Manifold Parts for the 1997 Ford E-150 Econoline?
Out of 25 Intake Manifold Parts for the 1997 Ford E-150 Econoline, the most popular in our inventory are:
from
$4.49
This product is not rated
Rubber Expansion Plug 1-5/8 In. – Size Range 1-5/8 In. – 1-3/4 In. (sold by each)
Intake Manifold Expansion Plugs
from
$2.29
This product is not rated
Steel Cup Expansion Plug 1-41/64 In., Height 0.360
Intake Manifold Expansion Plugs
What are the top-rated 1997 Ford E-150 Econoline Intake Manifold Parts?
Top-rated Intake Manifold Parts for your 1997 Ford E-150 Econoline based on customer reviews/ratings are:
from
$4.29
(1)
Rubber Expansion Plug 1-5/8 In. – Size Range 1-5/8 In. – 1-3/4 In.
“You will still have to take the engine apart”
