1997 Ford E-150 Econoline Exhaust Parts
More 1997 Ford E-150 Econoline Exhaust Parts Categories
If you’re looking for an original Exhaust Parts replacement for a 1997 Ford E-150 Econoline, you can search through our selection below. You’ll also find aftermarket and OEM Exhaust Parts to meet your needs.
Essential 1997 Ford E-150 Econoline Exhaust Parts
Walker – SoundFX Muffler, Direct Replacement, No Fabrication Needed (Part No.18819)
from
$94.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX® direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and/or welding
- FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
Walker – Sound Solution Muffler (Part No.18650)
from
$64.99
Sound Solution mufflers are engineered with 100% aluminized steel for longer service life compared to low carbon steel. These mufflers have mechanical interior joints for durability, And spun-locked heads for resistance to rupture from backfires. Sound Solution mufflers are available in a universal fitment style, with both quality appearance And favorable acoustics.
See More
Walker – 3 Bolt Exhaust Pipe Flange Gasket: Graphite, Heat Resistant, Premium Materials (Part No.31638)
from
$6.79
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Felpro – Exhaust Pipe Flange Gasket (Part No.61155)
from
$5.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Walker – Hanger Length 7.25 (Part No.35819)
from
$22.99
Complete your exhaust repair with Walker® exhaust hangers. Designed with OE-style features to support undercar exhaust components, Walker hangers are manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
- OE DESIGN — Designed with OE-style features for easy installation
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS — Made from quality steel for durability and long life
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Dorman – Help – Exhaust Stud Kit – M10-1.5 x 72mm (Part No.03131)
from
$16.49
Our exhaust manifold flange kit includes all necessary studs and nuts for a complete repair.
Product Features:
See More
Product Features:
- Direct replacement for a proper fit every time
- Durable steel construction
- New hardware helps fix exhaust leaks
- Also available in the Exhaust Manifold Hardware Kit
Dorman – Help – Exhaust Stud Kit – 7/16-14 x 2.535 In. (Part No.03135)
from
$16.99
Our exhaust manifold flange kit includes all necessary studs and nuts for a complete repair.
Product Features:
See More
Product Features:
- Direct replacement for a proper fit every time
- Durable steel construction
- New hardware helps fix exhaust leaks
- Also available in the Exhaust Manifold Hardware Kit
Dorman – Direct Fit Exhaust Manifold: Without Heat Shield (Part No.674-462)
from
$148.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
Dorman – Direct Fit Exhaust Manifold: Without Heat Shield (Part No.674-169)
from
$121.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
Dorman – Direct Fit Exhaust Manifold: Without Heat Shield (Part No.674-405)
from
$117.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
Dorman – Help – Exhaust Manifold Hardware Kit (Part No.03411B)
from
$12.49
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
- Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Felpro – Exhaust Manifold Hardware Kit (Part No.ES 75115)
from
$40.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Designed and manufactured to meet the needs of the exhaust system repair environment.
- Verified, tested and certified proprietary Organic coating resists corrosion.
- Tightly controlled coefficient of friction ensures reliable installation.
- Application specific kit contents
- Self-locking nuts (where applicable).
Walker – Exhaust 35574 Catalytic Converter Air Tube (Part No.35574)
from
$87.99
Walker®, with our worldwide OE partnerships and manufacturing facilities, possesses the technical excellence needed to meet today’s emissions control needs, while developing solutions for tomorrow’s challenges. Walker® is a ‘one-stop’ convenience, offerin
Product Features:
See More
Product Features:
- Offered in a variety of styles and sizes for your installation needs
- Constructed from durable and robust material for long life
- Universal fit for installation flexibility
- Designed to work seamlessly with OE and Walker aftermarket replacement parts
- New Walker® accessories help to ensure effective exhaust repairs
Walker – Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2.75 (Part No.35793)
from
$4.99
Complete your exhaust repair with an Exhaust Mate® U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker® accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2 (Part No.35335)
from
$1.99
Complete your exhaust repair with an Exhaust Mate® U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker® accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 3 (Part No.35794)
from
$10.29
Complete your exhaust repair with an Exhaust Mate® U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker® accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
MagnaFlow – HM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.23101)
from
$516.99
MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23101 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 1996 Ford E-150 Econoline, 1996 Ford E-350 Econoline Club Wagon, and more, this direct-fit catalytic converter also interchanges with OE parts F4TZ-5E212-B and F6UZ-5F250-NB. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – Standard Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.93316)
from
$474.99
MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93316 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 1985-1987 Ford E-350 Econoline, 1985-1987 Ford E-350 Econoline Club Wagon, and additional vehicles. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Walker – Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed (Part No.15033)
from
$164.99
Designed to provide the required reduction in tailpipe emissions and meet EPA emissions requirements with assured compliance, Walker® Universal Catalytic Converters are available for pre-OBDII (1995 and older) vehicles.
Product Features:
See More
Product Features:
- EPA COMPLIANT — For use on pre-OBDII vehicles, 1995 and older. Not legal for sale or use in CA, CO and NY. Legal in ME on all pre-OBD vehicles only. Consult your state’s aftermarket converter regulations for details.
- NO BREAK IN REQUIRED — Ready to operate with application-specific converter shell design and mat compression, no converter break in required after installation
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
- OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
- BUY WITH CONFIDENCE — Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 5-year 50,000-mile/80,000-kilometer structural integrity warranty. Visit Walkerexhaust.com for details.
Walker – Tail Pipe Aluminized 60.5" (Part No.46466)
from
$46.99
Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Walker – Intermediate Pipe Aluminized 30.75" (Part No.53795)
from
$77.99
Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Walker – Tail Pipe Aluminized 61" (Part No.46704)
from
$64.99
Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Walker – Exhaust 35229 Exhaust System Hanger Insulator (Part No.35229)
from
$7.79
Complete your exhaust repair with Walker® insulators. Available in a variety of styles and sizes, they’re designed to work with Walker aftermarket replacement parts for quick and easy installation.
Product Features:
See More
Product Features:
- OE DESIGN — Designed with OE-style features for easy installation and fit
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust 35460 Exhaust System Hanger Insulator (Part No.35460)
from
$6.79
Complete your exhaust repair with Walker® insulators. Available in a variety of styles and sizes, they’re designed to work with Walker aftermarket replacement parts for quick and easy installation.
Product Features:
See More
Product Features:
- OE DESIGN — Designed with OE-style features for easy installation and fit
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Taylor Gaskets – Seal-4-Good Header Flange Gasket (Part No.66033)
from
$48.99
Seal-4-Good Header Flange Gasket
Mr. Gasket – Ultra Seal; Exhaust Gasket Set (Part No.5930)
from
$34.99
Graphite impregnated facing and a steel expanded metal core. Superior tensile strength. Resists cracking and withstands intense heat. Resists deteriorating. Anti-stick properties and easy removal for disassembly.
Product Features:
See More
Product Features:
- Withstands intense exhaust heat
- Graphite-impregnated facing
- Steel expanded metal core
- Superior tensile strength
- Resists deteriorating
- Anti-stick properties
- Easy removal for disassembly
Mahle – Exh. Manifold Gasket (Part No.A8112934749MAH)
from
$61.90
Exh. Manifold Gasket
Mr. Gasket – Exhaust Gasket Set (Part No.253)
from
$30.99
Mr. Gasket has three types of exhaust gaskets–standard, Ultra Seal, and Copperseal. Use the standard for a stock rebuild and the Ultra or Copperseal for extra blowout protection.
Product Features:
See More
Product Features:
- High-temperature exhaust material
- Withstands extreme exhaust heat
- Excellent sealing durability and torque retention
- Superior tensile strength
Popular 1997 Ford E-150 Econoline Exhaust Parts Categories
1997 Ford E-150 Econoline Exhaust Parts
You count on your 1997 Ford E-150 Econoline to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Exhaust Parts. With 49 Exhaust Parts ranging in price from $5.99 to $1,053.99, you’re sure to find everything you need for your 1997 Ford E-150 Econoline.
Brands matter. If you want to shop a specific Exhaust Parts brand, we stock 8 different brands like Walker, Dorman, and Felpro. 1997 Ford E-150 Econoline Exhaust Parts start as low as $5.99!
One of the best ways to find top quality OEM or aftermarket Exhaust Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 236 extensive product reviews on 1997 Ford E-150 Econoline Exhaust Parts. Some of the top-rated Exhaust Parts products we carry are Direct Fit Exhaust Manifold: Without Heat Shield with 2.8 stars and Direct Fit Exhaust Manifold: Without Heat Shield with 5.0 stars.
Did we mention you can order your Exhaust Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Exhaust Parts inventory for your 1997 Ford E-150 Econoline below to get started!
Top-Rated Exhaust Parts Brands For Your 1997 Ford E-150 Econoline
Trusted Exhaust Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1997 Ford E-150 Econoline running right for years to come. In our inventory you’ll find brands like Walker, Dorman, Felpro, and even more.
Popular Felpro Exhaust Parts
You’ll find popular Felpro brand products across Exhaust Pipes and Exhaust Gaskets. All are waiting to get your 1997 Ford E-150 Econoline back on the road. Some of the top-rated Felpro products in these categories are:
Top-Rated Dorman – Help Exhaust Parts
If Dorman – Help are what you’re looking for, our inventory holds plenty. We stock Dorman – Help brand Exhaust Parts for your 1997 Ford E-150 Econoline, and some of our most reviewed Dorman – Help parts include:
from
$16.29
(33)
Cap Screw-Hex Head-Grade 8- 1/2-13 x 2-1/2 In.
Exhaust Manifold and Header Hardware
FAQs for 1997 Ford E-150 Econoline Exhaust Parts
What are the most purchased Exhaust Parts for the 1997 Ford E-150 Econoline?
Out of 49 Exhaust Parts for the 1997 Ford E-150 Econoline, the most popular in our inventory are:
What are the top-rated 1997 Ford E-150 Econoline Exhaust Parts?
Top-rated Exhaust Parts for your 1997 Ford E-150 Econoline based on customer reviews/ratings are:
from
$152.99
(5)
Direct Fit Exhaust Manifold: Without Heat Shield
“The studs are nice looking, But are not threaded enough. You find out after you put them in and the exhaust is up and you are tyring to tighten the s”
from
$231.99
(2)
Catalytic Converter- EPA Ultra, Universal/ Fabrication Needed
“This is a good aftermarket cat that you will have to modify to fit your vehicle. This a universal cat that is determined to be an exact fit based on ”
