1997 Chevrolet Tahoe Suspension Parts
More 1997 Chevrolet Tahoe Suspension Parts Categories
If you’re looking for an original Suspension Parts replacement for a 1997 Chevrolet Tahoe, you can search through our selection below. You’ll also find aftermarket and OEM Suspension Parts to meet your needs.
Essential 1997 Chevrolet Tahoe Suspension Parts
MOOG – Coil Spring Set (Part No.81250)
from
$173.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
Carquest Premium – Shock Absorber Control Actuator Connector (Part No.PTA2442)
from
$26.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1997)
from
$13.99
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.
Product Features:
See More
Product Features:
- Protects the shock’s piston rod from damage
- Universal design for easy installation
- Tie-strap included for a secure fit
- Constructed from high quality urethane for maximum durability
- Multiple color choices available
Carquest – A/C and Heater Relay (Part No.R3177)
from
$23.29
Product Features:
See More
- Premium components and our own manufactured circuit board ensure precise operation, reliability, and extra durability for a longer service life
- Our electronic voltage regulator PC boards are encapsulated in epoxy to deliver improved performance and resistance to failure that may be caused by vibration and corrosion of electrical connections
- All parts are manufactured to stringent quality requirements. Our plants are TS16949 and ISO9001 certified which ensures that every part is the right part for the right vehicle.
Rare Parts – Control Arm Bushing (Part No.RP17073)
from
$139.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Torsional rubber bushings
- UV resistant
- No Squeak
Energy Suspension – Leaf Spring Bushing Set (Part No.3.2128G)
from
$99.99
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Adds Dramatic Amount of Performance/Durability
- Helps Vehicle Be in Control
- Allows the Suspension to Function Properly
Dorman – Rear Position Leaf Spring Bracket Kit (Part No.722-071)
from
$85.99
This leaf spring hanger is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this leaf spring hanger is designed to match the fit and function of the original part on specified vehicles
- Ideal solution – this hanger is a reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Arnott – Suspension Compresso (Part No.L70153257056ARN)
from
$431.10
Suspension Compresso
Rancho – RS5000X Strut (Part No.RS55831)
from
$219.99
Featuring a unique, exclusive valving system and advanced compression functionality, Rancho® RS5000®X struts deliver improved overall on- and off-road handling and performance.
Product Features:
See More
Product Features:
- IMPROVED HANDLING AND PERFORMANCE — Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road
- MINIMIZES ROUGH RIDE — Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride
- STRONG AND DURABLE — Features a nitro-carburized piston rod to resist scuffs and corrosion, double-welded loops at stress areas and application-specific sintered iron piston for enhanced structural integrity
- HANDLES EXTREME TEMPERATURE CHANGES — Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248°F
- SMOOTH PERFORMANCE — Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
- REDUCES FADE — Nitrogen gas pressurized to 60 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming
- MAINTAINS VEHICLE CONTROL — Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control
- BUILT TO LAST — Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area
- Rebound Bumper
Firestone Ride-Rite – Controls Two Air Springs Simultaneously, With Compressor/Gauge/Air Line (Part No.2158)
from
$551.99
Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.
Product Features:
See More
Product Features:
- Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
- Provides An Instant Air Source For The Air Helper Springs Or Accessories
- Single Point Fill (Both Air Springs Fill To The Same Pressure)
- Light Duty Compressor Specs (120 Pounds Per Square Inch Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)
TRW – Control Arm (Part No.L2000384238TRW)
from
$154.85
TRW control arms can help improve fuel economy, emissions, energy savings, driving comfort and most important, safety. TRW provides hardware kits as standard on all ball joints, installation instructions and catalog information in all formats. Upper and lower Control Arms designed as:
Product Features:
See More
Product Features:
- Aluminium forged Control Arms
- Aluminium cast Control Arms – low weight/high performance
- Steel forged Control Arms
- Steel stamped Control Arms Ball Joints include the latest state-of-the-art high performance designs:
- Temperature resistant
- Low-torque/high comfort solution
- Ball stud diameters ranging from 25 to 42mm
- Integral and non-integral designs Built in Bushes:
- Rubber Bushes
- Rubber and Metal Bushes
- Hydraulic Bushes
Rare Parts – Coil Spring Insul (Part No.RP46346)
from
$29.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Reduces road noise
- UV resistant
- No Squeak
Dorman – Help – Leaf Spring Inserts (Part No.31067)
from
$11.99
This leaf spring insulator is designed to match the fit and function of the original insulator on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this leaf spring insulator is designed to match the fit and function of the original insulator on specified vehicles
- Restores functionality – reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Rancho – RS5000 Shock Absorber (Part No.RS5262)
from
$67.99
The shock that started it all! Rancho® RS5000 series has been the shock of choice for light trucks and sport utility vehicles since 1985. Available for stock and lifted applications, RS5000 is ideal for on and off-road use, at an affordable price.
Product Features:
See More
Product Features:
- Ten-stage velocity sensitive valving – Provides tuning specific for each vehicle
- 5/8-in. (16mm) diameter piston rod (select applications) – Adds strength and durability. Size varies by application.
- 1 3/8-in. (35mm) diameter piston (select applications) – Ensures performance in any environment
- Protective boot included – Protects the shock rod and oil seal
Monroe – Monroe Shock Absorber Air Hose Kit (Part No.AK18)
from
$36.49
Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.
See More
Monroe – Load Adjusting Shock Absorber (Part No.58612)
from
$190.99
Ideal for light trucks that that tow or carry varying loads, Monroe load adjusting shocks include a heavy gauge calibrated spring that adjusts to road and weight conditions to provide extra control when operating conditions get more demanding.
Product Features:
See More
Product Features:
- REDUCES SAG UNDER LOAD — Ideal for occasionally hauling or towing varying loads, heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission, see owner’s manual)
- EXCEPTIONAL HANDLING — Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
- CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
- LONGER SERVICE LIFE — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- Nitrogen Gas Charged: For Improved Ride & Handling, Helps Maintain Tire To Road Contact By Reducing Aeration – On Most Applications
- 5/8 nitrocarburized rod for long service life.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Rare Parts – Control Arm Bumper (Part No.RP22899)
from
$223.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Torsional rubber bushings
- UV resistant
- No Squeak
Dorman – Suspension Control Arm (Part No.523-089)
from
$30.49
This suspension control arm bumper is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
KYB – Jounce Bumper and Bellows (Part No.SB129)
from
$19.29
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
Product Features:
See More
Product Features:
- Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
- Poly Foam Bumper Prevents The Strut From Bottoming Out
- Built With Design And Quality That Matches Or Exceeds One
- Protects The Upper Seal And Bushing
Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1998)
from
$13.29
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.
Product Features:
See More
Product Features:
- Protects the shock’s piston rod from damage
- Universal design for easy installation
- Tie-strap included for a secure fit
- Constructed from high quality urethane for maximum durability
- Multiple color choices available
Dorman – Rear Leaf Spring Insert (Part No.924-070)
from
$12.99
This leaf spring bumper spacer is designed to match the fit, appearance and function of the original spacer on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this leaf spring bumper spacer is designed to match the fit, appearance and function of the original spacer on specified vehicles
- Restores functionality – this spacer is made to fully restore part functionality after the original part fails
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Firestone Ride-Rite – Air Spring, Inside Coil Spring Mnt, 500-1000Lb Leveling, Adjustable From 5-35Psi (Part No.4186)
from
$138.99
Discover the difference Coil Rite air helper springs can make in improving the ride, handling and braking of your vehicle. Coil Rite air helper springs provide extra support for coil springs in cars, minivans, vans, light trucks, RVs and SUVs. The adjustable Coil Rite air helper springs will level your vehicle, provide a smoother ride, and assist with more effective braking and handling, even under heavy loading and adverse road conditions. Coil Rite air helper springs are designed to fit inside existing coil spring suspensions, creating a variable rate spring. These air helper springs are made of durable, elastic polyurethane, providing years of comfort and stability to your vehicle. Firestone Coil Rite air helper springs enable adjustment for varying loads and road conditions by controlling the air pressure in the air helper springs. Spring performance can be altered as easily as inflating a tire. The air springs will support 500 To 1000 Pounds per set.
Product Features:
See More
Product Features:
- Made Of Durable Polyurethane To Withstand The Rigors Of Coil-Sprung Suspensions
- Increase Vehicle Stability Absorbs Road Shock Providing A Smooth Ride For Passengers And Load
- Keep The Vehicle Level, Improves Steering Control And Braking Effectiveness, Levels Headlight Beams And Reduces Tire Wear
- Reduce Bottoming Out, Protective Air Cushion Softens Contact Between The Axle And Frame
- Discover The Difference Coil Rite Air Helper Springs Can Make In Improving The Ride, Handling And Braking Of Your Vehicle
- No Drill Installation
- Everything Is Included For A Quick, Easy Installation. Brackets, Air Springs, Hardware, Air Line, And Separate Valves For Manual Inflation
Belltech – 1 To 3 Inch Lift, Torsion Bar Key, With Torsion Bar Keys Only (Part No.3925)
Dorman – Rear Position Leaf Spring Shackle Kit (Part No.722-006)
from
$35.99
Get ahead of fatigued or rusted leaf spring shackles before they become dangerous. Made of sturdy steel with a power coated finish to resist corrosion, this leaf spring shackle is a direct replacement for your vehicle’s stock shackle.
Product Features:
See More
Product Features:
- Direct replacement – This leaf spring shackle fits and performs like original equipment shackle
- Quality construction – manufactured from durable steel and powder coated for corrosion resistance and a long service life
- Excellent value – original equipment quality at a lower price
- Ready to install – all essential hardware is included for an easy installation
MOOG – Leaf Spring Shackle (Part No.K150404)
from
$63.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Engineered to provide long life and dependability
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Dorman – Rear Active Shock, Rear, With Lower Mounting Isolator (Part No.949-706)
from
$595.99
This air suspension shock is designed to match the fit and function of the original shock on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this air suspension shock is designed to match the fit and function of the original shock on specified vehicles
- Restores functionality – reliable replacement for an original part that has failed due to internal rubber components that have torn or rotted
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Monroe – Max-Air Air Shock Absorber (Part No.MA779)
from
$101.99
Ideal for hauling, Monroe® Max-Air® shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual.)
Product Features:
See More
Product Features:
- MAINTAIN RIDE HEIGHT UNDER LOAD — Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission, see owner’s manual)
- EASY TO ADJUST — Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor, pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
- EXCEPTIONAL HANDLING — Full-displaced valving on compression and extension cycles for a smooth ride
- BUILT TO LAST — Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
- CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
- Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
- Special Air Fitting: Resists air leakage.
Suncore – Shocks (Part No.109G-14-R)
from
$134.99
Shocks
Popular 1997 Chevrolet Tahoe Suspension Parts Categories
1997 Chevrolet Tahoe Suspension Parts
You count on your 1997 Chevrolet Tahoe to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Suspension Parts. With 132 Suspension Parts ranging in price from $6.79 to $1,217.99, you’re sure to find everything you need for your 1997 Chevrolet Tahoe.
Brands matter. If you want to shop a specific Suspension Parts brand, we stock 16 different brands like Monroe, Rancho, and Dorman. 1997 Chevrolet Tahoe Suspension Parts start as low as $6.79!
One of the best ways to find top quality OEM or aftermarket Suspension Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 860 extensive product reviews on 1997 Chevrolet Tahoe Suspension Parts. Some of the top-rated Suspension Parts products we carry are RS5000 Shock Absorber with 4.7 stars and Reflex Monotube Shock Absorber with 4.3 stars.
Did we mention you can order your Suspension Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Suspension Parts inventory for your 1997 Chevrolet Tahoe below to get started!
Top-Rated Suspension Parts Brands For Your 1997 Chevrolet Tahoe
Trusted Suspension Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1997 Chevrolet Tahoe running right for years to come. In our inventory you’ll find brands like Monroe, Rancho, Dorman, and even more.
Popular KYB Suspension Parts
You’ll find popular KYB brand products across Shocks and Struts. All are waiting to get your 1997 Chevrolet Tahoe back on the road. Some of the top-rated KYB products in these categories are:
Top-Rated Monroe Suspension Parts
If Monroe are what you’re looking for, our inventory holds plenty. We stock Monroe brand Suspension Parts for your 1997 Chevrolet Tahoe, and some of our most reviewed Monroe parts include:
FAQs for 1997 Chevrolet Tahoe Suspension Parts
What are the most purchased Suspension Parts for the 1997 Chevrolet Tahoe?
Out of 132 Suspension Parts for the 1997 Chevrolet Tahoe, the most popular in our inventory are:
What are the top-rated 1997 Chevrolet Tahoe Suspension Parts?
Top-rated Suspension Parts for your 1997 Chevrolet Tahoe based on customer reviews/ratings are:
from
$72.99
(19)
OESpectrum Light Truck Shock Absorber
“I got these to go on the front of my Chevy K1500 to replace old noisy KYBs that were on there since I bought the truck. The KYB worked good, but the n”
