1997 Chevrolet S10 Performance Ignition Products
More 1997 Chevrolet S10 Performance Ignition Products
Find your specific 1997 Chevrolet S10 original or aftermarket Performance Ignition Products below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1997 Chevrolet S10 Performance Ignition Products
MSD Ignition – Wire Set; Street Fire; GM Vortec V6; 4.3L 96-04 (Part No.5577)
from
$59.99
The Street Fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.
Product Features:
See More
Product Features:
- Helically Wound Conductor
- Suppresses Electro And Radio Noise
- Great Strength And Durability
- Heavy Duty Terminals For Secure Connection
- 8mm Silicone/Synthetic Jacket Resists Heat
- Improved Spark Delivery And Power
Accel – Universal Fit Graphite Suppression; Spark Plug Wire Set (Part No.8026)
from
$128.99
These ACCEL carbon and graphite core wire sets virtually eliminate RFI noise, while providing maximum conductivity for ultimate performance in any race or street application. Double silicon insulation eliminates leakage and misfire.
Product Features:
See More
Product Features:
- Heavy Duty 8.8mm Oversized Silicone Jacket
- 500 Ohms/ft. Of Resistance
- 550 Degree Double Silicone Construction
- Fiberglass Braid
- Carbon/Graphite Core
- Magnetic Suppression
- Fiberglass/Kevlar Core
- 500 Ohms Resistance
MSD Ignition – Coil; GM Coil Pack; 2 Tower Style (Part No.8224)
from
$76.99
The updated Fuel Pump Booster is an easy way to maintain the proper fuel pressure on your car after adding a power adder such as a turbo or supercharger. The new model allows you to make your boost adjustments through a PC for improved control and accuracy. The Booster ensures that the engine receives the fuel it needs to make up for the increase in air being pumped into the intake manifold. It will increase the voltage to the factory fuel pump in proportion to manifold boost pressure in order to maintain the proper fuel delivery. The amount of increase is adjustable from a range of an additional 1.5 -22 volts up to 30 psi which can all be set and adjusted from your PC with MSD’s easy to use Windows based software. The MSD Booster will wire to the factory fuel pump relay or with a secondary booster pump.
Product Features:
See More
Product Features:
- Direct performance replacement
- For GM 2 Tower Coils Used From Mid 1980s To Late 1990s
- 80:1 turns ratio
- Lower Primary Resistance Produces High Voltage Output
- Works w/Stock Ignition As Well As MSD Ignitions
- CARB E.O. Approved
Accel – GM 86-99 Dis Supercoil (Part No.140017)
from
$72.99
Re-engineered to be the only true performance AC/Delco style DIS coil. “”Raised Dome”” construction, section bobbin technology, highly specialized silicone magnetic steel core, optimized windings, resistance, and turns ratio result in higher energy and voltage outputs, and longer dwell. Compatible with OE computer controlled ignition systems as well as Crane or MSD capacitive discharge DIS ignition systems. Brass contact increases energy transfer and resists corrosion better than aluminum. High dielectric strength “”ACCEL Yellow”” over molded housing. Packaged as single unit: 4 cyls require 2 coils, 6 cyls require 3 coils and 8 cyls require 4 coils.
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- Standard Motor Products SMP Dr-39
- MSD 8224
- Resist Corrosion
MSD Ignition – Coil; GM External HEI Coil; High Performance (Part No.8226)
from
$71.99
Top off your GM ignition system with these great new replacement coils. The GM coils have MSD performance in factory style housings. MSD designed these coils by combining our blaster coil experience with e-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The coils will work with stock ignition systems as well as MSD equipped cars and trucks. Installation tip: If you plan to install an MSD ignition with your GM dual connector coil, use PN 8876 harness for a direct plug-in installation.
Product Features:
See More
Product Features:
- Direct performance replacement for GM dual connector coil
- 100:1 Turns Ratio
- Lower Primary Resistance Produces High Voltage Output
- Works w/Stock Ignition As Well As MSD Ignitions
Accel – GM 1984-95 Remote Supercoil (Part No.140011)
from
$79.99
Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Compatible with late model GM computer controlled remote mount HEI systems. Direct bolt-in, plug-in replacement. Brass coil wire contact increases energy transfer and resists corrosion better than aluminum. Complete with new mounting hardware.
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- Standard Motor Products SMP DR-37
- MSD 8226
- Resist Corrosion
- W/New Mounting Hardware
Accel – Hei Remote Mount Super Coil (Part No.140024)
from
$65.99
Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Results in quicker starts, improved idle quality, crisper throttle response and more high RPM power. Compatible with late model GM computer controlled remote mount HEI systems. Direct bolt-in, plug-in replacement. Can also work with CD ignition systems. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Brass coil wire contact increases energy transfer and resists corrosion better than aluminum. Comes complete with new mounting hardware. High dielectric strength ACCEL yellow over molded housing. Output is 48,000 volts with 0.2ohms resistance.
Product Features:
See More
Product Features:
- Remote Mount Ignition Coil
- Higher Energy/Voltage Outputs
- Quicker Starts
- Improved Throttle Response
- More High RPM Power
- Increase Energy Transfer
- Resist Corrosion
- W/New Mounting Hardware
Mallory – Unilite Ignition Module (Part No.605)
from
$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Auto Ventshade (AVS) – Carflector®, Hood Protector, Smoke, Low Profile, 1 Pc (Part No.20004)
from
$69.99
The AVS Carflector® hood shield is custom molded with precision engineering to fit cars, CUVs, and SUVs. The AVS Carflector has a medium profile wrap design to provide excellent protection from road debris for the hood, fenders, and windshield. Off-the-hood design makes it easy for cleaning as well as car-wash safe. Easy to install by attaching with 3M(TM) automotive-grade adhesive or mechanical fasteners. Comes with a limited lifetime warranty. Whatever you drive, AVS has the variety of hoodshield styles to suite your design preferences and vehicle style.
Product Features:
See More
Product Features:
- Provides deflection to protect hood, fenders, and windshield
- Medium profile, wrap-around design for Cars and CUVs
- Off-the-hood design allows for easy cleaning and waxing
- Durable, impact-resistant acrylic construction
- Available in dark smoke finish
- Easy, no-drill installation
MSD Ignition – Harness; MSD to Late Model; GMs; 96-on (Part No.8877)
from
$72.99
MSD Ignition control are easy to install, but we also offer several direct plug-in harnesses for late model vehicles! The harnesses plug directly into your factory coil and harness then four color coded wires plug into the corresponding wires of the MSD.
Product Features:
See More
Product Features:
- Plug-In Harness w/Color Coded Wires
- No Cutting Or Splicing
- Quick Easy Installation
- Provides A Direct Plug-In Installation
- When Adding An MSD Ignition Control
Popular 1997 Chevrolet S10 Performance Ignition Products Categories
1997 Chevrolet S10 Performance Ignition Products
Maybe you’re in the middle of a full rebuild of that 1997 Chevrolet S10. Maybe you just need a couple of Performance Ignition Products. Either way, Advance Auto Parts has 6 different Performance Ignition Products in our inventory ranging from $59.99 to $85.29. That means you can find the exact parts or products you need to keep that 1997 Chevrolet S10 running smoothly.
Performance Ignition Products are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 1997 Chevrolet S10. MSD Ignition, Accel, and Mallory are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Performance Ignition Products for your 1997 Chevrolet S10, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Performance Ignition Products to keep your 1997 Chevrolet S10 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Performance Ignition Products Brands To Make Your 1997 Chevrolet S10 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1997 Chevrolet S10 demands trusted brand parts and products to keep it running. Many trusted brands of Performance Ignition Products make up Advance Auto Parts’ inventory, and all are ready to help make your S10 the best it can be. Be sure to browse some of our top Performance Ignition Products brands and parts.
Popular Mallory Performance Ignition Products
We carry Mallory parts in our stock across Performance Ignition Parts categories, plus more. For a 1997 Chevrolet S10, our most popular Mallory Performance Ignition Products include:
Top 1997 Chevrolet S10 Performance Ignition Products from Accel
Accel products are another trusted brand when it comes to Performance Ignition Products for your 1997 Chevrolet S10. Popular Accel parts include:
FAQs for 1997 Chevrolet S10 Performance Ignition Products
What are the most purchased Performance Ignition Products for the 1997 Chevrolet S10?
Out of 6 Performance Ignition Products for the 1997 Chevrolet S10, the most popular in our inventory are:
from
$69.99
This product is not rated
Carflector®, Hood Protector, Smoke, Low Profile, 1 Pc
Performance Ignition Modules
from
$72.99
This product is not rated
Harness; MSD to Late Model; GMs; 96-on
Performance Ignition Kits
