1997 Chevrolet Camaro Ignition and Tune-Up Products

Essential Ignition and Tune-Up Products for 1997 Chevrolet Camaros

NGK – NGK Wire Set (Part No.51440)

NGK Wire Set

from

$75.99
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

Accel – 8Mm Super Stock Spiral Uni Bu (Part No.5040B)

8Mm Super Stock Spiral Uni Bu

from

$89.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.

Product Features:
  • 500 Ohms/ft Of Resistance
  • 550 F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • High RFI Suppression For Street And Strip Use
  • Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
  • Pre And Post HEI Vehicles
  • 8mm High Gloss Silicone Jacket
See More

GM Genuine Parts – Ignition Distributor Shaft O-Ring Seal (Part No.D3995A)

Ignition Distributor Shaft O-Ring Seal

from

$14.29
GM Genuine Parts Ignition Distributor Shaft Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

GM Genuine Parts – Ignition Switch (Part No.20965947)

Ignition Switch

from

$46.99
GM Genuine Parts Ignition Starter are designed, engineered, and tested to rigorous standards, and are backed by General Motors. It is a multi-position switch that activates the ignition, accessory, and cranking circuits in your vehicle. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Work with vehicle electronics to help optimize vehicle capabilities
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Carquest Premium – Ignition Conversion Kit (Part No.CBA1702)

Ignition Conversion Kit

from

$359.99
Ignition Conversion Kit

ACDelco – Ignition Wire Holder (Part No.F1060289679ACD)

Ignition Wire Holder

from

$1.99
Ignition Wire Holder

Accel – Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set (Part No.4040)

Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set

from

$63.99
These ACCEL wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with black wire contain zinc-plated steel terminals. Noise suppression core. Set contains 8 plug wires with coil lead.

Product Features:
  • 7mm And 8mm High Gloss Silicone Jacket
  • 450° F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • RFI Suppression For Street Driven Applications
  • Custom-fit Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
See More

Carquest Premium – Ignition Coil Connector (Part No.PTA1122)

Ignition Coil Connector

from

$48.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Distributor Ignition Pickup Connector (Part No.PTA1044)

Distributor Ignition Pickup Connector

from

$17.79
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Distributor Vacuum Advance (Part No.VBC1018)

Distributor Vacuum Advance

from

$33.99
The distributor is just one piece of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:
  • All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

PerTronix – 808409 Flame-Thrower Spark Plug Wires 8 cyl 8mm GM HEI Custom Fit Red (Part No.808409)

808409 Flame-Thrower Spark Plug Wires 8 cyl 8mm GM HEI Custom Fit Red

from

$67.99
Most modern electronic ignition systems require suppression style wires to preserve sensitive components. Flame-Thrower 8mm Custom fit MAGx2 wires provide enhanced RFI suppression and dual current paths for more power delivered to the spark plug. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cutting, crimping and splicing.

Product Features:
  • Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
  • Low 500 ohm per foot resistance.
  • 8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
  • EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
  • Fiberglass reinforcing braid for added strength and flexibility.
See More

PerTronix – D650710 Cap Male Black 8 cylinder Flame-Thrower Billet Distributor (Part No.D650710)

D650710 Cap Male Black 8 cylinder Flame-Thrower Billet Distributor

from

$51.99
Replacement distributor cap for Flame-Thrower distributors. High dielectric strength cap with male or female brass terminals.

Product Features:
  • PerTronix D650710 Cap Male Black 8 cylinder Flame-Thrower Billet Distributor
  • Replacement distributor cap for Flame-Thrower distributors.
See More

NGK – OE Series V-Power Nickel Spark Plug: V-Groove Tip Design, FR4 (Part No.5155)

OE Series V-Power Nickel Spark Plug: V-Groove Tip Design, FR4

from

$4.29
NGK V-Power spark plugs offer reliable performance and improved ignitability over standard nickel plugs. Engineered specifically for OE applications, the special V-cut nickel alloy center electrode and concave ground electrode of NGK’s V-Power spark plug increases ignitability providing quicker starts and smoother idle. NGK’s legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.

Product Features:
  • ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode with V-groove provides consistent performance
  • RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
  • NGK’s OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
  • TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
  • Enhanced Ignitability: The V-cut nickel alloy center electrode and concave ground electrode design of NGK V-Power spark plugs provide quicker starts and smoother idle.
  • OE Application Specific: Engineered specifically for Original Equipment (OE) applications, ensuring compatibility and reliable performance in your vehicle.
  • Reliable Performance: NGK V-Power spark plugs deliver consistent and reliable performance, making them a dependable choice for maintaining your vehicle’s engine efficiency.
See More

Carquest Premium – Ignition Switch Connector (Part No.PTA2851)

Ignition Switch Connector

from

$318.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Distributor Ignition Pickup Connector (Part No.PTA1205)

Distributor Ignition Pickup Connector

from

$35.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Delphi – Knock Sensor (Part No.AS10014)

Knock Sensor

from

$44.49
Manufactured to meet or exceed OE requirements; Delphi Knock Sensors help maximize engine performance with all fuels; Delphi Knock Sensors prevent against engine damage from pre-ignition knocking.

Product Features:
  • Delphi knock sensors help maximize engine performance with all fuels
  • Delphi knock sensors prevent against engine damage from pre-ignition knocking
  • Calibrated for a wide variety of frequencies to detect shifts, and adjust to provide accurate signals to help maximize engine performance
  • Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
  • Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
  • Self-generating piezoelectric design requires no power to the sensor
See More

Delphi – Knock Sensor (Part No.AS10262)

Knock Sensor

from

$41.49
Manufactured to meet or exceed OE requirements; Delphi Knock Sensors help maximize engine performance with all fuels; Delphi Knock Sensors prevent against engine damage from pre-ignition knocking.

Product Features:
  • Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
  • Delphi knock sensors prevent against engine damage from pre-ignition knocking
  • Calibrated for a wide variety of frequencies to detect shifts, and adjust to provide accurate signals to help maximize engine performance
  • Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
  • Ground-isolated design with 2-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
  • Self-generating piezoelectric design requires no power to the sensor
See More

Cardone New – New Distributor (Part No.84-1865)

New Distributor

from

$166.99
CARDONE New Distributors are backed by CARDONE Engineered Technology, which ensures that all CARDONE New Distributors meet proper form, fit and function. CARDONE Engineered Technology is based on over 40 years of reverse-engineering expertise, where original design weaknesses are identified and corrected, resulting in premium-quality, brand-new parts you can rely on. Installing a CARDONE Distributor on your vehicle will ensure that proper voltage is transmitted to the spark plugs in the correct timing pattern so that your vehicle will perform on command.

Product Features:
  • Each distributor includes the cap and rotor to make installation a snap.
  • Dust covers and gaskets are also included on Honda applications for your convenience.
  • 100% computer tested for guaranteed, long-lasting performance.
  • Guaranteed fit and function.
  • Meets or exceeds O.E.M performance.
See More

Carquest Premium – Distributor T1692: 100% New, With Cap and Rotor (Part No.T1692)

Distributor T1692: 100% New, With Cap and Rotor

from

$127.99
Carquest Premium distributors are built to meet or exceed the original equipment (OE) specifications for each application. Our distributors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each distributor is supplied with the cap, rotor and any seals needed for installation. Carquest Premium distributors are 100% new and undergo extensive validation testing to ensure long-lasting ignition performance and reliability.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new unit with no core charges
  • Precision machined shafts result in high speed accuracy and help prevent bearing failures
  • Every distributor is tested to ensure reliable and long-lasting performance
  • O-rings or gaskets included where applicable
  • Precision Engineered ignition modules and plugs ensure proper performance plus precise connection.
  • Precision machined and ground shafts assure high speed accuracy and prevent bearing failures.
  • Original Equipment Equivalent high voltage ignition coils.
  • 100% New Components and fasteners eliminate premature failures.
See More

DENSO – Original Equipment Quality Direct Ignition Coil (Part No.673-7100)

Original Equipment Quality Direct Ignition Coil

from

$39.99
As the innovator and leader in stick coil technology, DENSO has conducted superior testing and inspection processes to insure the highest quality ignition coil. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.

Product Features:
  • First Time Fit
  • Built to DENSO Original Equipment Standards
See More

Mallory – Universal Street Performance Ignition Coil (Part No.29219)

Universal Street Performance Ignition Coil

from

$76.99
Universal, 12-volt coil features an oil-filled design and arc resistant alkyd top for superior performance, insulation and cooling. The internal design of this coil eliminates the need for a separate ballast resistor. This coil is specifically designed to deliver optimum performance when used with: Mallory UNILITE or magnetic breaker less ignitions Mallory HYFIRE IV electronic ignition controls, and Mallory electronic ignition conversion kits.

Product Features:
  • 12 Volt Coil
  • Oil-Filled Design
  • Arch Resistant Alkyd Top
  • Designed To Deliver Optimum Performance
See More

ACDelco – 14-Way Female Gray Multi-Purpose Pigtail (Part No.PT789)

14-Way Female Gray Multi-Purpose Pigtail

from

$126.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Protective outer coverings help provide long-lasting durability
  • Color-coded wires allow for easy installation
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – Ignition Control Module Connector (Part No.PTC1312)

Ignition Control Module Connector

from

$80.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Ignition Module (Part No.CBJ1011)

Ignition Module

from

$258.99
CARQUEST Ignition Modules are built by an ignition systems manufacturer with expertise in the entire vehicle spark system.

Product Features:
  • CARQUEST Ignition Modules creates and refines the timing of the engine using various sensors and readings throughout the spark system in order to create an efficiently running engine.
  • CARQUEST Ignition Modules use current and voltage limiting circuitry in order to prevent the ignition coil from over voltage/current. Over voltages can allow for coils to create excessive heat which can damage to the ignition module resulting in check eng
  • CARQUEST Ignition Modules are 100% individually tested for all product functionalities including over voltage, timing and dwell.
See More

Delphi – Ignition Control Unit (Part No.F6000414850DEL)

Ignition Control Unit

from

$97.21
Delphi ignition modules feature distributor-based, DIS and late-model cassette configurations for broad coverage. Delphi modules control the primary ignition circuit to fire the coil, using input from sensors that determine engine rotation and speed. The result is accurate, repeatable timing for optimal exhaust emissions, fuel economy and performance.

Product Features:
  • OE Quality – Direct Fit
  • Factory original equipment connectors
  • No additional time consuming steps needed for installation
  • Longest performance life
See More

Accel – GM Ls Stock Boot Uni (Part No.9060C)

GM Ls Stock Boot Uni

from

$176.99
ACCEL ceramic boot spark plug wires provide the ultimate in heat resistant technology.

Product Features:
  • Includes LS coil boots and terminals
  • 14″ wire length
  • Ceramic boots withstand up to 2,000° Fahrenheit
  • 8mm double silicone construction black wire rated at 600° F rated
  • 500 Ohms/foot ferro sprial core offers the highest level of RFI/EMI suppression
  • Universal and custom fit applications
  • Pre And Post HEI Vehicles
  • Stainless Steel Plug Terminals
See More

NGK – NGK Wire Set (Part No.51371)

NGK Wire Set

from

$36.99
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

Accel – 8Mm Super Stock Spiral Uni Rd (Part No.5040R)

8Mm Super Stock Spiral Uni Rd

from

$101.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.

Product Features:
  • 500 Ohms/ft Of Resistance
  • 550 F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • High RFI Suppression For Street And Strip Use
  • Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
  • Pre And Post HEI Vehicles
  • 8mm High Gloss Silicone Jacket
See More

Upgrade your 1997 Chevrolet Camaro with Top-Quality Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 1997 Chevrolet Camaro, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Ignition and Tune-Up Products are key to keeping your Camaro functioning at its best. At Advance Auto Parts, we offer a wide selection of 147 Ignition and Tune-Up Products for the 1997 Chevrolet Camaro, designed to meet your needs without breaking the bank. From Ignition Boot replacements to Distributors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Ignition and Tune-Up Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Ignition and Tune-Up Products for your 1997 Chevrolet Camaro at great prices. Our Ignition and Tune-Up Products inventory for this model ranges from just $1.99 to $868.99, with an average price of $92.59. Our 147 Ignition and Tune-Up Products in stock come from 20 trusted brands, so you’re sure to find the right part for your 1997 Chevrolet Camaro without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1997 Chevrolet Camaro, we stock popular OEM and aftermarket Ignition and Tune-Up Products from top names like NGK, ACDelco, Autolite, and more. NGK Ignition and Tune-Up Products start at just $4.69 and boast an impressive 5 stars average rating from customers. ACDelco and Autolite also bring quality to the table, with Ignition and Tune-Up Products available starting at $1.99, and at an average 5 stars rating. With 3,451 customer reviews and counting, our 1997 Chevrolet Camaro Ignition and Tune-Up Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Ignition and Tune-Up Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1997 Chevrolet Camaro is always ready to roll. We’re committed to providing you with everything you need to keep your Camaro in top shape, all in one place. Start shopping confidently below for your 1997 Chevrolet Camaro!

Best-Selling Ignition Boots for 1997 Chevrolet Camaros

Enhance the driving experience in your Chevrolet with 3 quality Ignition Boot components, starting at $38.99.

Carquest Premium – Spark Plug Wire Set: 6 Wires, Increased performance, Designed for direct fit (Part No.35-6136)

Spark Plug Wire Set: 6 Wires, Increased performance, Designed for direct fit

from

$38.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

ACDelco – GM Original Equipment Ignition Wire Set (Part No.F1020582381ACD)

GM Original Equipment Ignition Wire Set

from

$72.54
Built to match the original equipment in length and fit, ACDelco OES Ignition Wire Sets also offer a performance advantage over many aftermarket products.

Product Features:
  • ACDelco OES wire sets are designed to be like Original in critical areas such as cable length and diameter, terminal design and insulator position
  • Have broad coverage available for most vehicles on the road today from 1980 to present
  • Provide a high degree of Radio Frequency Interference (RFI) suppression
  • Are designed to offer fit, form and function for optimum performance
  • Kevlar reinforced fiberglass core in select sets for increased strength
  • Core sheathed in radio-static absorbent material for increased RFI suppression
  • Wire-wound, stainless steel alloy conductor for maximum spark delivery and RFI suppression on most applications
  • A layer of conductive heat-resistant latex for added durability
  • Insulating rubber-based compound inner jacket helps minimize voltage drop and enhance durability
  • Thick silicone outer jacket for excellent heat resistance
See More

DENSO – Spark Plug Wire Set: Carbon Core, 6 Wire Set (Part No.671-6038)

Spark Plug Wire Set: Carbon Core, 6 Wire Set

from

$61.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:
  • Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
  • Identical OE end caps are designed to “click” into place for easy installation and a secure fit
  • Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
See More

Most Popular 1997 Chevrolet Camaro Distributors

Customize your Chevrolet with 36 Distributors products like Distributor Cap Kits, Distributors, and Distributor Vacuum Advances, all priced under $433.99.

Carquest – Distributor Cap and Rotor Kit (Part No.C400)

Distributor Cap and Rotor Kit

from

$151.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Solid brass terminals make better connections and greater resistance to electrical pitting and corrosion
  • As a global manufacturer, we have complete control of the manufacturing process, from components to finished product?
  • As a premier manufacturer serving the automotive aftermarket since 1919, we deliver the highest quality and best coverage to meet your repair needs
See More

Accel – Dist GM Opti-Spark Ii 94.5-97 (Part No.59125)

Dist GM Opti-Spark Ii 94.5-97

from

$433.99
ACCEL Performance Replacement Distributors are the perfect choice for your daily driver or street machine. Using all new components, these distributors feature: High performance ACCEL Electronics. All new components-housings are either new castings or turned from billet stock, centerless ground shaft with oil lite bushings. High dielectric strength cap, balanced rotor. Male tower distributor cap with brass cap and rotor contacts (Ford and AMC Models feature screw mounted wire retainer for the ultimate plug wire retention). Iron or steel distributor gear. Direct plug in replacement with factory type connectors for plug and play installation.

Product Features:
  • Direct Plug In Factory Replacement Plug And Play
  • High Dielectric Strength Thermoplastic Cap With Brass terminals
  • Cap is Sealed to Eliminate Corrosion
  • Cap is Vented to Remove Captured Heat
  • Cap Traces Are Overmolded To Eliminate Arc Over
  • Rotor Blade Is Coated For Longer Life
  • High strength dielectric glass filled cap with brass contacts
  • All new unit with new hardware
See More

Carquest Premium – Distributor T1833: 100% New, With Cap and Rotor (Part No.T1833)

Distributor T1833: 100% New, With Cap and Rotor

from

$195.99
Carquest Premium distributors are built to meet or exceed the original equipment (OE) specifications for each application. Our distributors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each distributor is supplied with the cap, rotor and any seals needed for installation. Carquest Premium distributors are 100% new and undergo extensive validation testing to ensure long-lasting ignition performance and reliability.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new unit with no core charges
  • Precision machined shafts result in high speed accuracy and help prevent bearing failures
  • Every distributor is tested to ensure reliable and long-lasting performance
  • O-rings or gaskets included where applicable
  • Precision Engineered ignition modules and plugs ensure proper performance plus precise connection.
  • Precision machined and ground shafts assure high speed accuracy and prevent bearing failures.
  • Original Equipment Equivalent high voltage ignition coils.
  • 100% New Components and fasteners eliminate premature failures.
See More

PerTronix – D4002 Flame-Thrower HEI Distributor Cap and Rotor Kit Blue (Part No.D4002)

D4002 Flame-Thrower HEI Distributor Cap and Rotor Kit Blue

from

$42.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

Product Features:
  • Made from hi-performance 60 KV rated alkyd molding compound.
  • Cap and rotor kits include nylon rotor hold-down screws.
  • Flame-Thrower dust covers provide a larger air gap around the coil.
See More

PerTronix – D4000 Flame-Thrower HEI Distributor Cap and Rotor Kit Black (Part No.D4000)

D4000 Flame-Thrower HEI Distributor Cap and Rotor Kit Black

from

$41.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

Product Features:
  • Made from hi-performance 60 KV rated alkyd molding compound.
  • Cap and rotor kits include nylon rotor hold-down screws.
  • Flame-Thrower dust covers provide a larger air gap around the coil.
See More

Carquest Premium – Distributor Ignition Pickup Connector (Part No.PTA1044)

Distributor Ignition Pickup Connector

from

$17.79
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

PerTronix – D4001 Flame-Thrower HEI Distributor Cap and Rotor Kit Red (Part No.D4001)

D4001 Flame-Thrower HEI Distributor Cap and Rotor Kit Red

from

$42.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

Product Features:
  • Made from hi-performance 60 KV rated alkyd molding compound.
  • Cap and rotor kits include nylon rotor hold-down screws.
  • Flame-Thrower dust covers provide a larger air gap around the coil.
See More

PerTronix – D600700 Cap Black and Rotor 8 cylinder Flame-Thrower Billet Distributor (Part No.D600700)

D600700 Cap Black and Rotor 8 cylinder Flame-Thrower Billet Distributor

from

$41.99
Replacement distributor cap and rotor for Flame-Thrower billet and cast distributors. High dielectric strength cap with male or female brass terminals with premium rotor with brass contact.

Product Features:
  • PerTronix D600700 Cap Black and Rotor 8 cylinder Flame-Thrower Billet Distributor
  • Replacement distributor cap and rotor for Flame-Thrower billet and cast distributors
See More

PerTronix – D9006 Flame-Thrower HEI Distributor Adjustable Vacuum Advance Canister (Part No.D9006)

D9006 Flame-Thrower HEI Distributor Adjustable Vacuum Advance Canister

from

$30.99
Vacuum Advance & LockoutThese vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency. Our vacuum lockout plates allow for precise pickup coil position and accurate rotor phasing.

Product Features:
  • PerTronix D9006 Flame-Thrower HEI Distributor Adjustable Vacuum Advance Canister
  • These vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency.
See More

PerTronix – D600710 Cap Male Black and Rotor 8 cylinder Flame-Thrower Billet Distributor (Part No.D600710)

D600710 Cap Male Black and Rotor 8 cylinder Flame-Thrower Billet Distributor

from

$51.99
Replacement distributor cap and rotor for Flame-Thrower billet and cast distributors. High dielectric strength cap with male or female brass terminals with premium rotor with brass contact.

Product Features:
  • PerTronix D600710 Cap Male Black and Rotor 8 cylinder Flame-Thrower Billet Distributor
  • Replacement distributor cap and rotor for Flame-Thrower billet and cast distributors
See More

PerTronix – D4051 Flame-Thrower HEI Distributor Cap Red (Part No.D4051)

D4051 Flame-Thrower HEI Distributor Cap Red

from

$37.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

Product Features:
  • Made from hi-performance 60 KV rated alkyd molding compound.
  • Cap and rotor kits include nylon rotor hold-down screws.
  • Flame-Thrower dust covers provide a larger air gap around the coil.
See More

GM Genuine Parts – Ignition Distributor Shaft O-Ring Seal (Part No.D3995A)

Ignition Distributor Shaft O-Ring Seal

from

$14.29
GM Genuine Parts Ignition Distributor Shaft Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

PerTronix – D650710 Cap Male Black 8 cylinder Flame-Thrower Billet Distributor (Part No.D650710)

D650710 Cap Male Black 8 cylinder Flame-Thrower Billet Distributor

from

$51.99
Replacement distributor cap for Flame-Thrower distributors. High dielectric strength cap with male or female brass terminals.

Product Features:
  • PerTronix D650710 Cap Male Black 8 cylinder Flame-Thrower Billet Distributor
  • Replacement distributor cap for Flame-Thrower distributors.
See More

Carquest Premium – Distributor Ignition Pickup Connector (Part No.PTA1205)

Distributor Ignition Pickup Connector

from

$35.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

PerTronix – D4050 Flame-Thrower HEI Distributor Cap Black (Part No.D4050)

D4050 Flame-Thrower HEI Distributor Cap Black

from

$37.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

Product Features:
  • Made from hi-performance 60 KV rated alkyd molding compound.
  • Cap and rotor kits include nylon rotor hold-down screws.
  • Flame-Thrower dust covers provide a larger air gap around the coil.
See More

PerTronix – D4052 Flame-Thrower HEI Distributor Cap Blue (Part No.D4052)

D4052 Flame-Thrower HEI Distributor Cap Blue

from

$37.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

Product Features:
  • Made from hi-performance 60 KV rated alkyd molding compound.
  • Cap and rotor kits include nylon rotor hold-down screws.
  • Flame-Thrower dust covers provide a larger air gap around the coil.
See More

Carquest Premium – Distributor Cap and Rotor Kit (Part No.CAC1311)

Distributor Cap and Rotor Kit

from

$211.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

PerTronix – D600701 Cap Red and Rotor 8 cylinder Flame-Thrower Billet Distributor (Part No.D600701)

D600701 Cap Red and Rotor 8 cylinder Flame-Thrower Billet Distributor

from

$44.99
Replacement distributor cap and rotor for Flame-Thrower billet and cast distributors. High dielectric strength cap with male or female brass terminals with premium rotor with brass contact.

Product Features:
  • PerTronix D600701 Cap Red and Rotor 8 cylinder Flame-Thrower Billet Distributor
  • Replacement distributor cap and rotor for Flame-Thrower billet and cast distributors
See More

PerTronix – D4150 Flame-Thrower Distributor Cap HEI/EST Black (Part No.D4150)

D4150 Flame-Thrower Distributor Cap HEI/EST Black

from

$36.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

Product Features:
  • Made from hi-performance 60 KV rated alkyd molding compound.
  • Cap and rotor kits include nylon rotor hold-down screws.
  • Flame-Thrower dust covers provide a larger air gap around the coil.
See More

PerTronix – D9010 Flame-Thrower HEI Distributor Clockwise Vacuum Lockout Kit (Part No.D9010)

D9010 Flame-Thrower HEI Distributor Clockwise Vacuum Lockout Kit

from

$10.99
Vacuum Advance & LockoutThese vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency. Our vacuum lockout plates allow for precise pickup coil position and accurate rotor phasing.

Product Features:
  • PerTronix D9010 Flame-Thrower HEI Distributor Clockwise Vacuum Lockout Kit
  • These vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency.
See More

PerTronix – D650711 Cap Male Red 8 cylinder Flame-Thrower Billet Distributor (Part No.D650711)

D650711 Cap Male Red 8 cylinder Flame-Thrower Billet Distributor

from

$51.99
Replacement distributor cap for Flame-Thrower distributors. High dielectric strength cap with male or female brass terminals.

Product Features:
  • PerTronix D650711 Cap Male Red 8 cylinder Flame-Thrower Billet Distributor
  • Replacement distributor cap for Flame-Thrower distributors.
See More

PerTronix – D650700 Cap Black 8 cylinder Flame-Thrower Billet Distributor (Part No.D650700)

D650700 Cap Black 8 cylinder Flame-Thrower Billet Distributor

from

$41.99
Replacement distributor cap for Flame-Thrower distributors. High dielectric strength cap with male or female brass terminals.

Product Features:
  • PerTronix D650700 Cap Black 8 cylinder Flame-Thrower Billet Distributor
  • Replacement distributor cap for Flame-Thrower distributors.
See More

PerTronix – D650701 Cap Red 8 cylinder Flame-Thrower Billet Distributor (Part No.D650701)

D650701 Cap Red 8 cylinder Flame-Thrower Billet Distributor

from

$41.99
Replacement distributor cap for Flame-Thrower distributors. High dielectric strength cap with male or female brass terminals.

Product Features:
  • PerTronix D650701 Cap Red 8 cylinder Flame-Thrower Billet Distributor
  • Replacement distributor cap for Flame-Thrower distributors.
See More

PerTronix – D9011 Flame-Thrower HEI Distributor Counter Clockwise Vacuum Lockout Kit (Part No.D9011)

D9011 Flame-Thrower HEI Distributor Counter Clockwise Vacuum Lockout Kit

from

$10.99
Vacuum Advance & LockoutThese vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency. Our vacuum lockout plates allow for precise pickup coil position and accurate rotor phasing.

Product Features:
  • PerTronix D9011 Flame-Thrower HEI Distributor Counter Clockwise Vacuum Lockout Kit
  • These vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency.
See More

PerTronix – D600711 Cap Male Red and Rotor 8 cylinder Flame-Thrower Billet Distributor (Part No.D600711)

D600711 Cap Male Red and Rotor 8 cylinder Flame-Thrower Billet Distributor

from

$61.99
Replacement distributor cap and rotor for Flame-Thrower billet and cast distributors. High dielectric strength cap with male or female brass terminals with premium rotor with brass contact.

Product Features:
  • PerTronix D600711 Cap Male Red and Rotor 8 cylinder Flame-Thrower Billet Distributor
  • Replacement distributor cap and rotor for Flame-Thrower billet and cast distributors
See More

PerTronix – Flame-Thrower Electronic Distributor Billet (Part No.D100811)

Flame-Thrower Electronic Distributor Billet

from

$391.99
Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford. Our distributors ship with Ignitor II technology modules. Replace your outdated points, electronic distributor or bulky HEIs with this performance

Product Features:
  • PerTronix D100811 Flame-Thrower Electronic Distributor Billet Chevrolet Small Block/Big Block Plug and Play with Ignitor II Technology Non Vacuum Advance Red Male Cap
  • Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.
See More

PerTronix – Flame-Thrower Electronic Distributor Billet (Part No.D100810)

Flame-Thrower Electronic Distributor Billet

from

$391.99
Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford. Our distributors ship with Ignitor II technology modules. Replace your outdated points, electronic distributor or bulky HEIs with this performance

Product Features:
  • PerTronix D100810 Flame-Thrower Electronic Distributor Billet Chevrolet Small Block/Big Block Plug and Play with Ignitor II Technology Non Vacuum Advance Black Male Cap
  • Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.
See More

PerTronix – Flame-Thrower Electronic Distributor Billet (Part No.D100801)

Flame-Thrower Electronic Distributor Billet

from

$379.99
Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford. Our distributors ship with Ignitor II technology modules. Replace your outdated points, electronic distributor or bulky HEIs with this performance

Product Features:
  • PerTronix D100801 Flame-Thrower Electronic Distributor Billet Chevrolet Small Block/Big Block Plug and Play with Ignitor II Technology Non Vacuum Advance Red Cap
  • Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.
See More

PerTronix – Flame-Thrower Electronic Distributor Billet (Part No.D100701)

Flame-Thrower Electronic Distributor Billet

from

$371.99
Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford. Our distributors ship with Ignitor II technology modules. Replace your outdated points, electronic distributor or bulky HEIs with this performance

Product Features:
  • PerTronix D100701 Flame-Thrower Electronic Distributor Billet Chevrolet Small Block/Big Block Plug and Play with Ignitor II Technology Vacuum Advance Red Cap
  • Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.
See More

PerTronix – Flame-Thrower Electronic Distributor Billet (Part No.D100800)

Flame-Thrower Electronic Distributor Billet

from

$371.99
Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford. Our distributors ship with Ignitor II technology modules. Replace your outdated points, electronic distributor or bulky HEIs with this performance

Product Features:
  • PerTronix D100800 Flame-Thrower Electronic Distributor Billet Chevrolet Small Block/Big Block Plug and Play with Ignitor II Technology Non Vacuum Advance Black Cap
  • Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.
See More

PerTronix – Flame-Thrower Electronic Distributor Billet (Part No.D100700)

Flame-Thrower Electronic Distributor Billet

from

$371.99
Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford. Our distributors ship with Ignitor II technology modules. Replace your outdated points, electronic distributor or bulky HEIs with this performance

Product Features:
  • PerTronix D100700 Flame-Thrower Electronic Distributor Billet Chevrolet Small Block/Big Block Plug and Play with Ignitor II Technology Vacuum Advance Black Cap
  • Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.
See More

PerTronix – Flame-Thrower Electronic Distributor Billet (Part No.D100710)

Flame-Thrower Electronic Distributor Billet

from

$364.99
Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford. Our distributors ship with Ignitor II technology modules. Replace your outdated points, electronic distributor or bulky HEIs with this performance

Product Features:
  • PerTronix D100710 Flame-Thrower Electronic Distributor Billet Chevrolet Small Block/Big Block Plug and Play with Ignitor II Technology Vacuum Advance Black Male Cap
  • Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.
See More

PerTronix – Flame-Thrower Electronic Distributor Billet (Part No.D100711)

Flame-Thrower Electronic Distributor Billet

from

$357.99
Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford. Our distributors ship with Ignitor II technology modules. Replace your outdated points, electronic distributor or bulky HEIs with this performance

Product Features:
  • PerTronix D100711 Flame-Thrower Electronic Distributor Billet Chevrolet Small Block/Big Block Plug and Play with Ignitor II Technology Vacuum Advance Red Male Cap
  • Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.
See More

Forecast – Distributor Cap (Part No.F2010203453FOR)

Distributor Cap

from

$261.66
Forecast Distributor Caps and Rotors are made from top quality materials throughout to ensure high performance and long product life.

Product Features:
  • Superior Surface Finish
  • RFI Resistors (Asian) / RFI Suppression (European)
  • Installation Screws
  • Precision-machined Contacts
  • Finely -tooled Metal Mounting Sleeve (Asian)
See More

PerTronix – D701700 Vacuum Canister for Flame-Thrower Billet Distributor (Part No.D701700)

D701700 Vacuum Canister for Flame-Thrower Billet Distributor

from

$36.99


Product Features:
  • PerTronix D701700 Vacuum Canister for PerTronix Flame-Thrower Billet Distributor
  • Replacement Part (only) for PerTronix Flame Thrower Distributors
See More

PerTronix – D703700 Vacuum Lockout Kit for Flame-Thrower Counter Clockwise Billet Distributor (Part No.D703700)

D703700 Vacuum Lockout Kit for Flame-Thrower Counter Clockwise Billet Distributor

from

$18.99


Product Features:
  • PerTronix D703700 Vacuum Lockout Kit for PerTronix Flame-Thrower Counter Clockwise Billet Distributor
  • Replacement Part (only) for PerTronix Flame Thrower Distributors
See More

Top Picks for 1997 Chevrolet Camaro Spark Plugs

Upgrade Chevrolet Camaros with top-quality Spark Plugs parts, including 50 OEM and aftermarket selections for your 1997 model.

NGK – Iridium IX Spark Plug: Single Iridium Fine Wire, TR55IX (Part No.7164)

Iridium IX Spark Plug: Single Iridium Fine Wire, TR55IX

from

$11.99
NGK Iridium IX spark plugs are specifically designed for the performance enthusiast. Iridium IX provides outstanding acceleration, high fuel efficiency and durability. NGK Iridium IX plugs offer extreme ignitability and exceptional anti-fouling. Tapered c

Product Features:
  • SINGLE IRIDIUM TIP: Fine wire 0.6 millimeter iridium tip center electrode ensures high durability and a consistently stable spark
  • IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
  • TAPERED CUT GROUND ELECTRODE: Reduced quenching design produces outstanding ignitability, improved acceleration, fuel efficiency and durability
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
  • RECOMMENDED USAGE: Modified or high performance applications, or as an upgrade to OE nickel alloy spark plugs
See More

ACDelco – Double Platinum Spark Plug: Original Equipment Replacement (Part No.41-902)

Double Platinum Spark Plug: Original Equipment Replacement

from

$9.79
ACDelco GM Original Equipment Double Platinum Spark Plugs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. With a copper core and double platinum pads on the center electrode, these plugs are designed to deliver long-lasting performance. ACDelco GM Original Equipment parts are the true OE parts installed during the production or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:
  • One-piece, fired-in suppressor seal blends three glass types for a gas-tight seal that helps reduce radio frequency and engine interference, regulate spark plug energy, and protect against compression pressures for long life
  • Double platinum point pad on center and ground electrode offer excellent durability and consistent voltage demands to help reduce wear on ignition system
  • Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
  • ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Autolite – Platinum Spark Plug: Fires Cleaner, Easier Starts, Quicker Acceleration (Part No.AP606)

Platinum Spark Plug: Fires Cleaner, Easier Starts, Quicker Acceleration

from

$4.79
Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, Autolite Platinum spark plugs provide a center wire platinum firing tip which provides reduced gap erosion, fewer misfires, better performance and increased durability. Consider upgrading to Autolite Double Platinum or Iridium XP spark plugs for increased performance.

Product Features:
  • High nickel alloy side electrode maintains precise gap
  • Full platinum tip assures virtually no gap erosion for long life
  • Necked-down center electrode fires quicker, cleaner with less voltage for easier starts, quicker acceleration and improved fuel economy (as compared to standard plugs)
See More

DENSO – U-Groove Spark Plug: OE Performance, lasts 30K+ Miles, T16EPR-U15 (Part No.5023)

U-Groove Spark Plug:  OE Performance, lasts 30K+ Miles, T16EPR-U15

from

$2.99
OE Performance, lasts 30K+ Miles, T16EPR-U15. The unique U-Groove ground electrode is one of the finest features of DENSO spark plugs, designed to fire leaner mixtures than conventional plugs for improved ignitability. Precision machine-rolled threads reduce seizing and cross-threading in delicate aluminum heads, ensuring a secure fit. With a wide range of part numbers, these spark plugs cater to thousands of applications, including classic and collector cars. Built to last twice as long as most conventional plugs, each unit is 100% pre-fired to assure reliable operation. The center electrode tip is made of durable nickel, and the seat type is tapered, making it a reliable choice for enhanced efficiency in emission gas purification and fuel consumption.

Product Features:
  • Patented U-groove ground electrode design fires leaner mixtures than conventional plugs
  • Precision machine-rolled threads reduce seizing and cross-threading in delicate aluminum heads
  • Wide range of part numbers for thousands of applications, including classic and collector cars
  • Lasts twice as long as most conventional plugs
  • 100% pre-fired to assure reliable operation
  • U-Groove Conventional
  • Durable Nickel Center Electrode Tip: Provides long-lasting performance and improved efficiency in emission gas purification and fuel consumption.
See More

NGK – OE Series Laser Iridium Spark Plug: Fine Wire Tip Design, ITR4A15 (Part No.5599)

OE Series Laser Iridium Spark Plug: Fine Wire Tip Design, ITR4A15

from

$14.99
NGK Laser Iridium spark plugs offer the best combination of performance and longevity. Engineered specifically for OE applications, Laser Iridium spark plugs are tested to the highest standards to ensure quality and durability. Iridium tipped center elect

Product Features:
  • ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction fine wire iridium alloy center electrode provides consistent performance
  • IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
  • PLATINUM TIP GROUND ELECTRODE: Unless OE specified, platinum protection at the ground electrode provides excellent ignitability and service life
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
  • RECOMMENDED USAGE: Best for vehicles with OE fine wire iridium alloy plugs
See More

Motorcraft – Spark Plug (AGSF32FECF4) (Part No.SP-439-A)

Spark Plug (AGSF32FECF4)

from

$7.79
Motorcraft Spark Plugs are original equipment on Ford Motor Company vehicles engineered to meet strict Ford engineering standards to provide original equipment performance and reliability. Delivering performance, reliability and confidence, Motorcraft spa

Product Features:
  • Motorcraft spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption and optimize emissions.
  • Backed by Motorcraft’s Service Parts Warranty
  • Exact fit for Ford, Lincoln and Mercury vehicles
  • Resistant to oxidation and arc erosion.
  • Multi-rib insulator protects against misfire.
  • Service intervals of up to 100,000 miles.
  • Motorcraft Spark Plugs are designed with high quality materials to provide reliable performance for almost any application.
  • Motorcraft Spark Plugs are what was in the vehicle when it was manufactured
  • Motorcraft ignition components help prevent false check engine lights.
See More

Autolite – Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration (Part No.106)

Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration

from

$3.49
Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Guaranteed to deliver quick starts, good fuel economy and smooth acceleration, Autolite Copper Core spark plugs are designed to meet or exceed OES design requirements. Consider upgrading to Autolite Platinum, Double Platinum or Iridium XP plugs for improved engine performance. Copper core plugs are the industry standard.

Product Features:
  • Copper-glass seal bonds insulator, terminal post center electrode together; assures full required voltage at spark gap; gas-tight seal (100% leak proof)
  • Multi-rib insulator reduces danger of “flash-over”
  • One-piece terminal post adds strength
  • Resistor reduces radio frequency interference (RFI) and electrode erosion
  • Quick Starts: Autolite Copper Core spark plugs are engineered to ensure your engine starts quickly and efficiently.
  • Good Fuel Economy: Designed to optimize fuel consumption, these spark plugs help you achieve better mileage.
  • Smooth Acceleration: Experience smoother and more responsive acceleration with Autolite Copper Core spark plugs.
  • OES Design Compliance: These spark plugs meet or exceed Original Equipment Service (OES) design requirements, ensuring reliable performance.
  • Tapered Seat Type: Featuring a tapered seat type, these spark plugs provide a secure fit and optimal performance.
See More

Autolite – Platinum Spark Plug: Fires Cleaner, Easier Starts, Quicker Acceleration (Part No.AP106)

Platinum Spark Plug: Fires Cleaner, Easier Starts, Quicker Acceleration

from

$4.79
Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, Autolite Platinum spark plugs provide a center wire platinum firing tip which provides reduced gap erosion, fewer misfires, better performance and increased durability. Consider upgrading to Autolite Double Platinum or Iridium XP spark plugs for increased performance.

Product Features:
  • High nickel alloy side electrode maintains precise gap
  • Full platinum tip assures virtually no gap erosion for long life
  • Necked-down center electrode fires quicker, cleaner with less voltage for easier starts, quicker acceleration and improved fuel economy (as compared to standard plugs)
See More

Motorcraft – Spark Plug (AGSF52C) (Part No.SP-442)

Spark Plug (AGSF52C)

from

$3.29
Motorcraft Spark Plugs are original equipment on Ford Motor Company vehicles engineered to meet strict Ford engineering standards to provide original equipment performance and reliability. Delivering performance, reliability and confidence, Motorcraft spa

Product Features:
  • Motorcraft spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption and optimize emissions.
  • Backed by Motorcraft’s Service Parts Warranty
  • Exact fit for Ford, Lincoln and Mercury vehicles
  • Resistant to oxidation and arc erosion.
  • Multi-rib insulator protects against misfire.
  • Service intervals of up to 100,000 miles.
  • Motorcraft Spark Plugs are designed with high quality materials to provide reliable performance for almost any application.
  • Motorcraft Spark Plugs are what was in the vehicle when it was manufactured
  • Motorcraft ignition components help prevent false check engine lights.
See More

Dorman – Help – Spark Plug Non-Foulers – 14mm Tapered Seat (Part No.42008)

Spark Plug Non-Foulers - 14mm Tapered Seat

from

$9.99
This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles.
  • Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
  • Durable construction – made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

NGK – OE Series Laser Platinum Spark Plug: Fine Wire Tip Design, PTR5F-11 (Part No.6579)

OE Series Laser Platinum Spark Plug: Fine Wire Tip Design, PTR5F-11

from

$16.99
NGK Laser Platinum spark plugs provide high ignitability and longer service life compared to conventional nickel spark plugs. Laser Platinum plugs are tested to the highest standards to ensure quality and durability. Engineered specifically for OE applications. Laser platinum plugs provide stable idling, superior anti-fouling, improved fuel efficiency and lower emissions. High-grade pure alumina ceramic and 98% pure copper core prevents spark plug from overheating and provides reliable starts. Most Laser Platinum spark plugs feature a platinum pad on the ground electrode for even wear in distributorless ignition systems.

Product Features:
  • ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction fine wire platinum alloy center electrode provides consistent performance
  • PLATINUM ALLOY CENTER ELECTRODE: Longer wearing and higher temperature resistance compared to traditional nickel spark plugs
  • PLATINUM TIP GROUND ELECTRODE: Unless OE specified, platinum protection at the ground electrode provides excellent ignitability and service life
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
  • RECOMMENDED USAGE: Best for vehicles with OE fine wire platinum alloy plugs
  • Engineered for OE Applications: Specifically designed for Original Equipment (OE) applications, ensuring a perfect fit and optimal performance.
  • Enhanced Fuel Efficiency and Lower Emissions: These spark plugs contribute to improved fuel efficiency and reduced emissions, making them an eco-friendly choice.
  • Stable Idling and Anti-Fouling: The platinum pad on the ground electrode provides even wear, resulting in stable idling and superior anti-fouling performance.
See More

Champion – Iridium Spark Plug: Maximum Performance, OE Replacement, RS14WYPB5 (Part No.9404)

Iridium Spark Plug: Maximum Performance, OE Replacement, RS14WYPB5

from

$8.49
Champion® Iridium – the ultimate element. This spark plug’s fine-wire iridium center and platinum ground electrodes provide the sharpest spark focus for maximum performance.

Product Features:
  • Champion Iridium – Maximum Performance. Premium Spark Plug
  • Iridium center electrode delivers maximum life
  • Fine-wire center electrode and V-trimmed for greater ignitability
  • V-trimmed ground electrode promotes sharper spark focus
  • Maintains stable operating temperature under all engine loads
  • Heat-Active┐ alloy allows electrodes to reach optimal temperature quickly
See More

NGK – OE Series V-Power Nickel Spark Plug: V-Groove Tip Design, TR55 (Part No.3951)

OE Series V-Power Nickel Spark Plug: V-Groove Tip Design, TR55

from

$4.99
NGK V-Power spark plugs offer reliable performance and improved ignitability over standard nickel plugs. Engineered specifically for OE applications, the special V-cut nickel alloy center electrode and concave ground electrode of NGK’s V-Power spark plug increases ignitability providing quicker starts and smoother idle. NGK’s legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.

Product Features:
  • ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode with V-groove provides consistent performance
  • RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
  • NGK’s OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
  • TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
  • Enhanced Ignitability: The V-cut nickel alloy center electrode and concave ground electrode design of NGK V-Power spark plugs provide quicker starts and smoother idle.
  • OE Application Specific: Engineered specifically for Original Equipment (OE) applications, ensuring compatibility and reliable performance.
  • V-Groove Tip Design: The unique V-Groove tip design of the TR55 model enhances ignitability and overall engine performance.
  • Lower Emissions: The NGK Laser Platinum Spark Plug contributes to lower emissions, supporting a cleaner and more environmentally friendly driving experience.
See More

NGK – G-Power Spark Plug: Single Platinum Tip Design, TR55GP (Part No.3403)

G-Power Spark Plug: Single Platinum Tip Design, TR55GP

from

$5.99
NGK G-Power Platinum spark plugs are the best single platinum spark plugs at an economical price. G-Power plugs feature a fine wire platinum center electrode and a trapezoidal cut ground electrode that offers increased durability, improved fuel efficiency, lower emissions, faster starts and quicker acceleration over conventional nickel spark plugs. An excellent upgrade for vehicles which used nickel alloy spark plugs originally. For better performance consider upgrading to a NGK Iridium IX plug. For even greater performance consider upgrading to a NGK RUTHENIUM HX plug.

Product Features:
  • SINGLE PLATINUM TIP: Fine wire 0.6 millimeter platinum tip center electrode ensures improved durability and a consistently stable spark
  • PLATINUM ALLOY: G-Power platinum provides exceptional value with increased performance and longer service intervals than factory nickel plugs
  • TRAPEZOIDAL CUT GROUND ELECTRODE: Reduces quenching design produces improved ignitability and performance
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
  • RECOMMENDED USAGE: Lower cost alternative to double precious metal spark plugs or as an upgrade to OE nickel alloy spark plugs
  • Improved Fuel Efficiency: Designed to offer better fuel efficiency, the NGK G-Power Platinum spark plugs help you save on fuel costs.
  • Lower Emissions: These spark plugs contribute to lower emissions, making them an environmentally friendly choice.
  • Faster Starts and Quicker Acceleration: Experience faster starts and quicker acceleration with the advanced design of the NGK G-Power Platinum spark plugs.
See More

DENSO – Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, IT16TT (Part No.4713)

Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, IT16TT

from

$10.99
Durability of an OE style plug combined with Power & Torque of high performance.

Product Features:
  • 0.4mm Iridium Center Electrode: World’s Smallest Diameter that maximizes firing potential
  • 0.7mm Needle Tip Ground Electrode: Promotes higher spark energy and less heat quenching
  • DENSO Patented Optimized Iridium-Rhodium Alloy Formula: Highest concentration of Iridium vs. competitors for greater durability
  • DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
  • Durability of an OE style plug combined with Power & Torque of high performance.
  • Withstands temperatures greater than 4000░ Fahrenheit
  • Iridium TT
  • Advanced Twin-Tip Technology: Combines a Fine Wire Iridium Center Electrode with a Needle Tip Platinum Ground Electrode for superior ignition and efficiency.
  • Enhanced Fuel Economy and Lower Emissions: Designed to provide better fuel economy and reduced emissions, allowing you to drive around the Earth over 4 times.
  • Original Equipment Specification: Developed from the Super Ignition Plug (SIP) design, ensuring reliable and consistent performance.
See More

Autolite – Double Platinum Spark Plug: Platinum Firing, Superior Durability, Longer Life (Part No.APP606)

Double Platinum Spark Plug: Platinum Firing, Superior Durability, Longer Life

from

$6.49
Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, Autolite Double Platinum spark plugs feature platinum-to-platinum firing which virtually eliminates gap erosion, reduces misfires and increases durability of the plug. Consider upgrading to Autolite Iridium XP spark plugs for increased performance.

Product Features:
  • Works to optimize engine performance for a longer life and improved fuel economy
  • OE design
  • Full-platinum tips; platinum on both the center and side electrodes to promote reduced gap wear
  • Platinum ball welding process provides a consistent point of contact for enhanced adhesion
See More

Autolite – Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration (Part No.606)

Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration

from

$3.49
Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, Autolite Double Platinum spark plugs feature platinum-to-platinum firing which virtually eliminates gap erosion, reduces misfires and increases durability of the plug. Consider upgrading to Autolite Iridium XP spark plugs for increased performance.

Product Features:
  • Copper cored center electrode for higher thermal conductivity
  • Specially engineered high nickel alloy center and ground electrode for extended life
  • High alumina ceramic for high dielectric strength
  • Leak proof, heat fused internal seal for durability
  • Multi-rib insulator prevents flash-over
See More

DENSO – Iridium Power Spark Plug: Maximum Spark Energy, 0.4mm Iridium Tip, IT16 (Part No.5325)

Iridium Power Spark Plug: Maximum Spark Energy, 0.4mm Iridium Tip, IT16

from

$11.79
Increased performance with World’s smallest Iridium Center Eletrode (0.4mm).

Product Features:
  • World’s smallest Iridium Center Electrode (0.4mm) for improved spark for maximum combustion
  • Patented 360-degree laser welding assembly process
  • U-groove and taper cut ground electrode to maximize flame propagation.
  • Withstands temperatures greater than 4000° Fahrenheit
  • Burnished nickel plating for high temperature endurance and superior corrosion resistance
  • Wide range of part numbers for thousands of applications, including classic and collector cars
  • Iridium Power
See More

Champion – Copper Plus Spark Plug: Dependable Performance, OE Replacement, RS12YC (Part No.401)

Copper Plus Spark Plug: Dependable Performance, OE Replacement, RS12YC

from

$2.99
Dependable Performance, OE Replacement, RS12YC. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear. The Copper Plus design ensures dependable performance and durability, while the copper core center electrode allows for accurate control of heat range, extending the spark plug’s life. Built to ISO and SAE standards, it offers superior corrosion resistance and proven performance. The nickel center electrode tip and tapered seat type further enhance its reliability, making it an excellent choice for maintaining your engine’s efficiency.

Product Features:
  • Copper Plus – Dependable Performance and Durability
  • Copper core center electrode allows for accurate control of heat range for longer life
  • Superior corrosion resistance
  • Built to ISO and SAE standards for proven performance
  • Built to ISO and SAE standards for proven performance
  • Enhanced Conductivity and Heat Control: The Champion Copper Plus Spark Plug features a copper core electrode that provides increased conductivity and heat control, ensuring good overall wear and extending the spark plug’s life.
  • Reliable Nickel Center Electrode Tip: Featuring a nickel center electrode tip and a tapered seat type, this spark plug enhances reliability and ensures optimal engine performance.
See More

ACDelco – RAPIDFIRE Premium Platinum Tip Copper Core Spark Plug: Reduces Misfires & Enhances Durability (Part No.14)

RAPIDFIRE Premium Platinum Tip Copper Core Spark Plug: Reduces Misfires & Enhances Durability

from

$7.99
ACDelco Gold (Professional) RAPIDFIRE Spark Plugs are a high quality alternative to Original Equipment (OE) parts. These RAPIDFIRE Single Platinum Performance Spark Plugs are designed for everyday use and are a high quality replacement for many vehicles on the road today. These premium aftermarket spark plugs have high-quality suppressors that help prevent misfiring, an improved plug to boot seal, and a pure copper core for greater durability. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Product Features:
  • Solid state suppressor, with two-piece glass and brass seal, can help reduce radio frequency interference, regulates spark energy for long electrode life, and helps protect against high combustion pressures
  • Pure copper core provides great heat transfer and helps maximize plug durability
  • Platinum on center electrode enables superior spark characteristics and can reduce voltage requirements of the ignition system
  • Ribless insulator helps optimize plug to boot seal
  • Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
  • Premium aftermarket replacement part
  • Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
  • High-Quality Suppressors: ACDelco Gold RAPIDFIRE Spark Plugs feature high-quality suppressors that help prevent misfiring, ensuring reliable performance for everyday use.
  • Improved Plug to Boot Seal: Designed with an improved plug to boot seal, these spark plugs provide a secure fit, enhancing overall engine performance and longevity.
See More

ACDelco – Copper Core Spark Plug: Original Equipment Replacement (Part No.R44LTS)

Copper Core Spark Plug: Original Equipment Replacement

from

$4.99
ACDelco Professional Conventional Spark Plugs are designed for reliability and efficient performance, and are a high quality replacement for many vehicles on the road today. Their high-quality copper cores and outstanding suppression characteristics deliver reliable performance. They are also available for Marine applications. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function.

Product Features:
  • Black Onyx coating helps reduce corrosion
  • Copper core provides great heat transfer and helps maximize plug durability
  • Ribbed suppressor seal extends resistance and helps prevent spark ‘flash over’ and misfires
  • Nickel-chrome alloy sheathing helps prevent corrosion on center electrode
  • Available for use in Marine applications
  • Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
  • ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Champion – Copper Plus Spark Plug: Dependable Performance, OE Replacement, RS14YC6 (Part No.13)

Copper Plus Spark Plug: Dependable Performance, OE Replacement, RS14YC6

from

$2.99
This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear. The Copper Plus design ensures dependable performance and durability, while the copper core center electrode allows for accurate control of heat range, extending the spark plug’s life. Built to ISO and SAE standards, it offers superior corrosion resistance and proven performance. The nickel center electrode tip and tapered seat type further enhance its reliability, making it a top choice for maintaining your engine’s efficiency.

Product Features:
  • Copper Plus – Dependable Performance and Durability
  • Copper core center electrode allows for accurate control of heat range for longer life
  • Superior corrosion resistance
  • Built to ISO and SAE standards for proven performance
  • Built to ISO and SAE standards for proven performance
  • Nickel Center Electrode Tip: Equipped with a nickel center electrode tip, this spark plug offers superior durability and reliable performance, making it a dependable choice for maintaining engine efficiency.
  • Tapered Seat Type: The tapered seat type design of the Champion Copper Plus Spark Plug ensures a secure fit and optimal performance, contributing to the overall reliability of your engine.
  • OE Replacement: Designed as an OE replacement, the Champion Copper Plus Spark Plug guarantees dependable performance and durability, making it an ideal choice for maintaining your vehicle’s engine.
See More

DENSO – Double Platinum Spark Plug: OE Performance, lasts 60K+ Miles, PT16EPR-L13 (Part No.5070)

Double Platinum Spark Plug:  OE Performance, lasts 60K+ Miles, PT16EPR-L13

from

$9.99
Manufactured to the strictest OE performance, durability and emissions standards.

Product Features:
  • OE grade platinum on both center and ground electrodes
  • Premium shell construction with machine-rolled threads
  • Superior thermal conductivity
  • Sustained spark performance over 60,000 miles
  • Reduced secondary required voltage, increased ignition efficiency
  • Satisfied customers, reduced shop comebacks
  • Double Platinum
See More

E3 – DiamondFIRE Automotive Spark Plug: More Power, Saves Gas (Part No.E3.44)

DiamondFIRE Automotive Spark Plug: More Power, Saves Gas

from

$6.99
The Spark Plugs are the product of years of fundamental research in the combustion field. The unique patented electrode configuration of these new The spark plugs increases the amount of combustion pressure created during each power stroke of an engine, which results in a marked increase in power output, fuel economy, and reduced emissions in all gasoline engines. E3.44 is a 14mm, 0.708 reach plug with a taper seat. It fits domestic applications from the mid-90s. The automotive plugs have three legs securing the Diamond FIRE electrode to the shell. This allows for excellent heat transfer, and helps to create more turbulence in the cylinder. The patented Diamond FIRE side wire is proven to increase power, reduce fuel consumption and improve hydrocarbon emissions in long-term use.

Product Features:
  • E3’s Diamond Fire edge to edge ground electrode provides maximum performance with increased efficiency and a faster more complete burn.
  • Smoother Acceleration & Idle – The faster flame initiated by the The spark plug results in a more complete burn of the ingested fuel charge. More pressure is created against the piston more fuel is put to work
  • Energy – Power output improved up to 6% on average in the typical operating ranges. Results will vary.
  • Efficiency – The “diamond shaped” side wire electrode projects the combustion spark in a way that more quickly ignites the air/fuel mixture, thereby creating a significantly faster and larger flame kernel. The result is that more fuel is put to work durin
  • E3’s patented Diamond Fire Technology provides a cleaner burning combustion, which translates into fuel savings and reduced engine carbon deposits
  • The Spark Plugs are pre-gapped at the factory and cannot be adjusted.
  • Patented Electrode Configuration: The unique patented electrode design of the E3.44 spark plugs increases combustion pressure, resulting in enhanced power output and improved fuel economy.
  • Superior Heat Transfer: The three-leg design securing the Diamond FIRE electrode to the shell ensures excellent heat transfer and creates more turbulence in the cylinder for optimal performance.
  • Compatibility: The E3.44 spark plug is a 14mm, 0.708 reach plug with a taper seat, fitting domestic applications from the mid-90s.
  • Environmental Benefits: By improving combustion efficiency, these spark plugs help reduce emissions, contributing to a cleaner environment.
See More

ACDelco – Double Platinum Spark Plug: Original Equipment Replacement (Part No.41-940)

Double Platinum Spark Plug: Original Equipment Replacement

from

$9.79
ACDelco GM Original Equipment Double Platinum Spark Plugs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. With a copper core and double platinum pads on the center electrode, these plugs are designed to deliver long-lasting performance. ACDelco GM Original Equipment parts are the true OE parts installed during the production or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:
  • One-piece, fired-in suppressor seal blends three glass types for a gas-tight seal that helps reduce radio frequency and engine interference, regulate spark plug energy, and protect against compression pressures for long life
  • Double platinum point pad on center and ground electrode offer excellent durability and consistent voltage demands to help reduce wear on ignition system
  • Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
  • ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Champion – Platinum Power Spark Plug: Powerful Perfromance, OE Replacement, RS14PYC6 (Part No.3013)

Platinum Power Spark Plug: Powerful Perfromance, OE Replacement, RS14PYC6

from

$4.49
Champion® Platinum Power spark plugs deliver powerful performance with their premium design. Featuring a platinum center electrode for long life and a fine-wire center electrode for greater ignitability, these spark plugs ensure optimal engine performance. The V-trimmed ground electrode promotes sharper spark focus, while the exclusive Heat-Active alloy allows electrodes to reach optimal temperature. The platinum-tipped center wire resists wear and helps maintain the proper gap specification over the life of the plug, making it a reliable choice for your vehicle.

Product Features:
  • Platinum Power- Premium Spark Plug. Powerful Performance.
  • Platinum center electrode for long life
  • Fine-wire center electrode for greater ignitability
  • V-trimmed ground electrode promotes sharper spark focus
  • Heat-Active alloy allows electrodes to reach optimal temperature
  • Platinum tipped center wire resists wear and helps to maintain proper gap spec over life of the plug
  • Platinum Center Electrode: Features a platinum center electrode for extended durability and long life.
See More

Champion – Double Platinum & Power Spark Plug Exceptional Perf OE Replacement RS14PYPB5 (Part No.7940)

Double Platinum & Power Spark Plug Exceptional Perf OE Replacement RS14PYPB5

from

$6.29
Champion® Double Platinum Power spark plugs deliver more powerful performance with their premium design. Featuring a platinum center and ground electrode, these spark plugs offer greater wear resistance and maintain a stable operating temperature under all engine loads. The fine-wire center electrode ensures greater ignitability, while the V-trimmed ground electrode promotes sharper spark focus. The exclusive Heat-Active alloy allows the electrodes to reach optimal temperature, ensuring maximum life and performance.

Product Features:
  • Double Platinum Power – Premium Spark Plug. More Powerful Performance.
  • Platinum center and ground electrode for greater wear resistance
  • Maintains stable operating temperature under all engine loads
  • Fine-wire center electrode for greater ignitability
  • V-trimmed ground electrode promotes sharper spark focus
  • Heat-Active alloy allows electrodes to reach optimal temperature
  • OE Replacement: Designed as an original equipment replacement, ensuring compatibility and reliable performance for your vehicle.
See More

DENSO – PT16TT Platinum TT Spark Plug (Part No.4511)

PT16TT Platinum TT Spark Plug

from

$5.99
Twin-Tip design enables faster flame propagation for more complete combustion.
See More

Autolite – Double Platinum Spark Plug: Platinum Firing, Superior Durability, Longer Life (Part No.APP106)

Double Platinum Spark Plug: Platinum Firing, Superior Durability, Longer Life

from

$6.29
Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, Autolite Double Platinum spark plugs feature platinum-to-platinum firing which virtually eliminates gap erosion, reduces misfires and increases durability of the plug. Consider upgrading to Autolite Iridium XP spark plugs for increased performance.

Product Features:
  • Works to optimize engine performance for a longer life and improved fuel economy
  • OE design
  • Full-platinum tips; platinum on both the center and side electrodes to promote reduced gap wear
  • Platinum ball welding process provides a consistent point of contact for enhanced adhesion
See More

MSD Ignition – Wire Set; Super Conductor; Universal Chevy; LT1 with 90f boots (Part No.32139)

Wire Set; Super Conductor; Universal Chevy; LT1 with 90f boots

from

$215.99
For late model GM LT1 Engines, this set comes with the LT1 Boots and Terminals installed and 90 degree spark plug boots and terminals loose.

Product Features:
  • Includes 90 degree LT1 boot
  • Extra long 8.5mm wires so you can cut to your desired length.
  • Distributor Cap – Boots and Terminals Included
  • Includes Mini-Stripper-Crimper For Factory Style Crimps
See More

ACDelco – Iridium Spark Plug: Original Equipment Replacement (Part No.41-101)

Iridium Spark Plug: Original Equipment Replacement

from

$11.99
ACDelco GM Original Equipment Iridium Spark Plugs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. They are our latest in spark plug technology and an exact replacement for your vehicle’s original components. Iridium composition provides a high melting point and great strength, and provides excellent wear resistance and durability. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:
  • Iridium is the latest in spark plug technology and is an exact replacement for vehicles’ original components
  • Iridium composition provides a high melting point and great strength, helps to provide excellent wear resistance and durability
  • Iridium offers excellent engine idle stability, reliable cold starting, quick acceleration and smooth performance
  • Three Piece Fired in Suppressor seal meters spark energy for long electrode life, helps prevent combustion leakage and helps block radio frequencies that can affect vehicle electronics
  • Iridium plugs are laser-welded which provides precision welds, reduces excess debris and wear rate, thus increasing durability
  • Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
  • ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Autolite Iridium – Iridium XP Finewire Spark Plug: Improved Durability, More Focused Ignition (Part No.XP606)

Iridium XP Finewire Spark Plug: Improved Durability, More Focused Ignition

from

$9.99
Our best spark plug! Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, the Autolite Iridium XP spark plugs feature an iridium-enhanced 0.6mm finewire design and patented platinum sidewire technology to provide better overall durability and a more focused ignition for enhanced ignitability and performance. Features double Iridium-enhanced alloy technology center electrode for improved durability and wear resistance.

Product Features:
  • 0.6 mm finewire design improves ignitability
  • Patented V-trimmed platinum sidewire technology resists wear
  • OE equivalent design is engineered for every engine
  • Designed for better overall durability with virtually no gap erosion
  • Double Iridium-Enhanced Alloy Technology Center Electrode: Improves durability and wear resistance for a longer-lasting spark plug.
  • Designed and Engineered in the USA: Ensures high-quality manufacturing and engineering standards.
  • Tapered Seat Type: Ensures a secure fit and optimal performance in compatible engines.
See More

NGK – Ruthenium HX High Ignitability Spark Plug: DFE Tip Design, TR5AHX (Part No.94567)

Ruthenium HX High Ignitability Spark Plug: DFE Tip Design, TR5AHX

from

$14.99
NGK Ruthenium HX High Ignitability spark plugs are the best in class plug for todays modern vehicles. Patented Ruthenium technology offers the most advance tip technology and delivers the highest performance and life expectancy. Created from advanced OE technology as a high ignitability plug; Ruthenium HX spark plugs come with patented, specialized OEM DFE and PSPE tip designs. NGK Ruthenium HX High Ignitability spark plugs provide a more complete fuel burn resulting in a quicker throttle response, smoother idle and better cold starts. Ruthenium center electrode provides industry leading durability.

Product Features:
  • HIGH IGNITABILITY DOUBLE FINE ELECTRODE DESIGN: Combines 0.6 millimeter ruthenium center with opposed fine wire platinum ground electrode
  • RUTHENIUM ALLOY CENTER ELECTRODE: NGK’s patented ruthenium technology produces maximum performance, ignitability & durability at high temperatures
  • PLATINUM PIN TYPE GROUND ELECTRODE: Provides more complete fuel burn, quicker throttle response, smoother idle and better cold starts
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
  • RECOMMENDED USAGE: Modern vehicles using OE DFE type spark plugs or for those seeking an aftermarket plug with the latest OE technology
  • Specialized OEM Tip Designs: Features DFE and PSPE tip designs for enhanced ignitability and efficiency.
  • Industry-Leading Durability: Ruthenium center electrode ensures long-lasting performance and reliability.
See More

NGK – OE Series Laser Iridium Spark Plug: Fine Wire Tip Design, ITR5H13 (Part No.97287)

OE Series Laser Iridium Spark Plug: Fine Wire Tip Design, ITR5H13

from

$18.99
NGK Laser Iridium spark plugs offer the best combination of performance and longevity. Engineered specifically for OE applications, Laser Iridium spark plugs are tested to the highest standards to ensure quality and durability. Iridium tipped center electrode provides durability six times harder than platinum. NGKs high grade pure alumina ceramic and 98 percent pure copper core prevents the spark plug from overheating while providing reliable starts. Most Laser Iridium spark plugs feature a platinum pad on the ground electrode for even wear in distributorless ignition systems.

Product Features:
  • ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction fine wire iridium alloy center electrode provides consistent performance
  • IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
  • PLATINUM TIP GROUND ELECTRODE: Unless OE specified, platinum protection at the ground electrode provides excellent ignitability and service life
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
  • RECOMMENDED USAGE: Best for vehicles with OE fine wire iridium alloy plugs
  • Superior Durability: The iridium-tipped center electrode is six times harder than platinum, ensuring long-lasting performance.
  • OE Application Specific: Engineered specifically for Original Equipment (OE) applications, ensuring a perfect fit and optimal performance.
  • Even Wear: Features a platinum pad on the ground electrode for even wear, particularly beneficial in distributorless ignition systems.
  • Fine Wire Tip Design: The fine wire tip design of the ITR5H13 model enhances ignition efficiency and performance.
See More

NGK – Ruthenium HX High Ignitability Spark Plug: PSPE Tip Design, TR4BHX (Part No.97100)

Ruthenium HX High Ignitability Spark Plug: PSPE Tip Design, TR4BHX

from

$12.99
NGK Ruthenium HX High Ignitability spark plugs are the best in class plug for todays modern vehicles. Patented Ruthenium technology offers the most advance tip technology and delivers the highest performance and life expectancy. Created from advanced OE technology as a high ignitability plug; Ruthenium HX spark plugs come with patented, specialized OEM DFE and PSPE tip designs. NGK Ruthenium HX High Ignitability spark plugs provide a more complete fuel burn resulting in a quicker throttle response, smoother idle and better cold starts. Ruthenium center electrode provides industry leading durability.

Product Features:
  • HIGH IGNITABILITY PROJECTED SQUARE PLATINUM ELECTRODE DESIGN: Combines 0.6 millimeter ruthenium center with a unique cut-back PSPE ground electrode
  • RUTHENIUM ALLOY CENTER ELECTRODE: NGK’s patented ruthenium technology produces maximum performance, ignitability & durability at high temperatures
  • PSPE DESIGN: Projected square platinum electrode shape of the ground electrode provides the best ignitability and service life for high heat engines
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
  • RECOMMENDED USAGE: Modern vehicles using OE PSPE type spark plugs or for those seeking an aftermarket plug with the latest OE technology
  • Enhanced Fuel Burn: Provides a more complete fuel burn, resulting in quicker throttle response, smoother idle, and better cold starts.
  • Industry-Leading Durability: Ruthenium center electrode ensures exceptional durability and longevity.
See More

ACDelco – Rapidfire Spark Plug (Part No.3)

Rapidfire Spark Plug

from

$5.79
ACDelco Gold (Professional) RAPIDFIRE Spark Plugs are a high quality alternative to Original Equipment (OE) parts. These RAPIDFIRE Single Platinum Performance Spark Plugs are designed for everyday use and are a high quality replacement for many vehicles on the road today. These premium aftermarket spark plugs have high-quality suppressors that help prevent misfiring, an improved plug to boot seal, and a pure copper core for greater durability. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Product Features:
  • Solid state suppressor, with two-piece glass and brass seal, can help reduce radio frequency interference, regulates spark energy for long electrode life, and helps protect against high combustion pressures
  • Pure copper core provides great heat transfer and helps maximize plug durability
  • Platinum on center electrode enables superior spark characteristics and can reduce voltage requirements of the ignition system
  • Ribless insulator helps optimize plug to boot seal
  • Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
  • Premium aftermarket replacement part
  • Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
See More

Accel – Spark Plug (Part No.P526S)

Spark Plug

from

$27.49
ACCEL’s patented race proven spark plugs in a Shorty configuration. The overall length has been reduced 3/16 in to 3/8 in (depending on the specific spark plug) to gain critical air gap between the spark plug boot and the exhaust manifold or header tube. This helps eliminate burning the spark plug boot or dimpling the header tube. The shorter spark plug length also can make it easier to install an remove the spark plugs in certain applications where there is not a lot of room to fit a socket or move a wrench around.ACCEL Shorty Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL Shorty Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL Shorty Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.

Product Features:
  • Double Platinum Electrode for long life
  • Shorty Spark Plugs For Tubular Exhaust Headers
  • Eliminates Dimpling Headers For Added Clearance
  • Improves Spark Plug Access To Fit Socket Or Wrench
  • Shorter Overall Plug Length Vs. OE Style Plug
  • Projected Tip
  • Helps Eliminate Burned Spark Plug Boots
  • Shorty Header Spark Plug
  • Machine rolled 14mm threads protect your valuable cylinder heads
See More

Champion – Double Platinum & Power Spark Plug Exceptional Perf OE Replacement RS14PMPB5 (Part No.7983)

Double Platinum & Power Spark Plug Exceptional Perf OE Replacement RS14PMPB5

from

$6.29
Champion® Double Platinum Power¿ spark plugs deliver more powerful performance. Featuring exclusive Heat-Active¿ alloy, platinum fine wire center electrode and platinum pad ground electrode provide maximum life and sharper spark focus.

Product Features:
  • Double Platinum Power – Premium Spark Plug. More Powerful Performance.
  • Platinum center and ground electrode for greater wear resistance
  • Maintains stable operating temperature under all engine loads
  • Fine-wire center electrode for greater ignitability
  • V-trimmed ground electrode promotes sharper spark focus
  • Heat-Active┐ alloy allows electrodes to reach optimal temperature
See More

NGK – Laser Platinum Spark Plug (Part No.F1000163870NGK)

Laser Platinum Spark Plug

from

$16.45
NGK Laser Platinum spark plugs provide high ignitability and longer service life. Dual platinum surfaces ensure slow wear rate providing stable idle, superior anti fouling, improved fuel efficiency and lower emissions. The platinum disc welded to backside of ground electrode provides long life, faster starts and quicker acceleration. Laser Platinum spark plugs provide high ignitability and longer service life.

Product Features:
  • Laser welded Platinum center electrode tip
  • Platinum disc welded to backside of ground electrode provides long life
  • Trivalent Metal Plating provides superior anti-corrosion and anti-seizing properties
  • Faster starts and quicker acceleration
  • Better fuel economy and lower emissions
  • Best Platinum spark plug available
  • Original Equipment Manufacturer approved design
See More

DENSO – Iridium Long Life Spark Plug (Part No.F1000336979ND)

Iridium Long Life Spark Plug

from

$15.99
The DENSO Iridium Long Life spark plug was specifically designed for long service life and consistent performance in the latest, most advanced production cars DENSO’s patented iridium alloy is more durable than even platinum, allowing the center electrode to be shrunk to only 0.7mm in diameter. This produces a dramatic improvement in ignitability and spark plug life. Closely related to platinum and exhibiting even tougher qualities, the rare metal iridium is an ideal material for spark plugs. A fine-wire, 0.7mm iridium center electrode is 360-degree laser welded in place using an exclusive DENSO process, and then matched to a platinum ground electrode. This pair of precision-formed, premium-metal electrodes dramatically extends the plug’s useful life.

Product Features:
  • Fine-wire iridium center electrode
  • Platinum ground electrode
  • 360 degree laser-welded spark tip
  • Sustained spark performance over 100,000 miles
  • Withstands higher pressures and temperatures
See More

ACDelco – Professional Platinum Spark Plug (Part No.F1000575823ACD)

Professional Platinum Spark Plug

from

$14.95
An ideal plug for vehicles requiring platinum performance or older vehicles calling for conventional plugs, ACDelco’s Professional Platinum Spark Plugs can give up to 100,000 miles of service in some applications.

Product Features:
  • Dual platinum tip for improved resistance to spark erosion and corrosive combustion chamber environment.
  • A platinum center electrode and a platinum pad lower the ignition voltage demand.
  • 3-piece Fired-In-Suppressor Seal (FISS) helps reduce radio frequency interference, meters spark plug energy to help provide long electrode life and seals against compression leakage.
  • Designed with a corrosion-resistant shell.
  • Spark gap remains virtually unchanged during the life of the plug.
See More

NGK – Iridium IX Spark Plug (Part No.F100089174NGK)

Iridium IX Spark Plug

from

$14.24
The NGK Iridium IX offers extreme ignitability, improved throttle response and superior anti fouling properties. The Iridium alloy has extremely high melting point, ensuring high durability and a consistently stable spark that is perfect for today’s high-tech, high-performance engines. NGK’s IX Iridium Series Plugs were Designed Specifically for the Performance Enthusiast Designed specifically for the performance enthusiast.

Product Features:
  • Fine Wire Center Electrode Ensures High Durability and a Consistently Stable Spark
  • Iridium Alloy has an Extremely High Melting Point, Perfect for Today’s High-Tech, High Performance Engines
  • Trivalent Metal Plating Provides Superior Anti-Corrosion and Anti-Seizing Properties
  • Corrugated Ribs Prevent Flashover
  • Pure Alumina Silicate Ceramic Insulator, Provides Superior Strength and Better Heat Transfer
  • Copper Core Aids in Heat Removal
  • Triple Seals Prevent Leakage
See More

Bosch – OE Finewire Double Iridium Spark Plug (Part No.F100057259BOS)

OE Finewire Double Iridium Spark Plug

from

$12.67
4X longer service life compared to standard copper plugs Bosch OE Finewire Iridium is engineered to deliver both High performance and long life. The Bosch Iridium Plug provides original equipment design, materials and processes represent the best of OE technology. The ultra fine wire design and laser welded tapered ground electrode deliver optimum performance, while the iridium center electrode and platinum ground electrode help it to go the distance. Center Electrode Core Material: Nickel-Yttrium and Copper and Iridium – Center Electrode Tip Material: Iridium – Ground Electrode Tip Material: Nickel-Yttrium and Iridium

Product Features:
  • OE design for optimum fit and function
  • Center electrode is an ultra fine wire design.
  • Provides broader heat range to resist pre-ignition and fouling
  • Delivers exceptional ignitability and performance
  • Tapered shape ground electrode
  • Laser welded iridium-platinum alloy inlay
  • Nickel-plated shell with rolled threads
  • Anti-seize and corrosion protection
See More

Motorcraft – Enhance Engine Performance with Reliable Spark Plug (Part No.SP-439-AX)

Enhance Engine Performance with Reliable Spark Plug

from

$12.49
Motorcraft Spark Plugs are original equipment on Ford Motor Company vehicles engineered to meet strict Ford engineering standards to provide original equipment performance and reliability. Delivering performance, reliability and confidence, Motorcraft spark plugs are available for a broad range of applications, including domestic and import cars and trucks of all makes and sizes.

Product Features:
  • Motorcraft spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption and optimize emissions.
  • Backed by Motorcraft’s Service Parts Warranty
  • Exact fit for Ford, Lincoln and Mercury vehicles
  • Resistant to oxidation and arc erosion.
  • Multi-rib insulator protects against misfire.
  • Service intervals of up to 100,000 miles.
  • Motorcraft Spark Plugs are designed with high quality materials to provide reliable performance for almost any application.
  • Motorcraft Spark Plugs are what was in the vehicle when it was manufactured
  • Motorcraft ignition components help prevent false check engine lights.
See More

ACDelco – Professional RapidFire Performance Platinum Spark Plug (Part No.F1000575798ACD)

Professional RapidFire Performance Platinum Spark Plug

from

$9.57
Designed for today’s most popular autos, ACDelco’s RapidFire Platinum Spark Plugs fit engines using conventional plugs, as well as newer vehicles requiring platinum performance.

Product Features:
  • Ribless insulator that improves the plug-to-boot seal.
  • Tapered center wire electrode with a platinum pad reduces the firing diameter and helps improve the firing efficiency by concentrating and directing energy needed to fire the plug with less voltage.
  • Solid state suppressor with two-piece glass and brass seal helps reduce radio frequency interference, meters spark plug energy to help provide long electrode life and seals against compression leakage. When compared to conventional spark plugs:
  • Reduced sparking voltage.
  • Greater corrosion protection.
  • Longer life and improved efficiency.
See More

Autolite Iridium – Iridium XP Finewire Spark Plug: Improved Durability, More Focused Ignition (Part No.XP106)

Iridium XP Finewire Spark Plug: Improved Durability, More Focused Ignition

from

$8.99
Our best spark plug! Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, the Autolite Iridium XP spark plugs feature an iridium-enhanced 0.6mm finewire design and patented platinum sidewire technology to provide better overall durability and a more focused ignition for enhanced ignitability and performance. Features double Iridium-enhanced alloy technology center electrode for improved durability and wear resistance.

Product Features:
  • 0.6 mm finewire design improves ignitability
  • Patented V-trimmed platinum sidewire technology resists wear
  • OE equivalent design is engineered for every engine
  • Designed for better overall durability with virtually no gap erosion
See More

Motorcraft – SPARK PLUG (Part No.SP-442-X)

SPARK PLUG

from

$6.99
SPARK PLUG

NGK – V Power Spark Plug (Part No.F100037153NGK)

V Power Spark Plug

from

$4.69
The NGK V Power spark plug offers a 90 degree V-Power center copper or platinum electrode that provides performance, improved ignitability, increased fuel economy and lower emissions over standard Spark Plugs. The Trivalent Metal Plating has superior anti-corrosion and anti-seizing properties. NGK’s V-Power Plugs Feature a Unique V-Cut in the Center Electrode that Directs the Spark to the Edge of the Electrode, Helping the Spark Develop More Rapidly, Increasing Ignitability and Reducing Quenching.

Product Features:
  • Lowers ignition system voltage requirements
  • Greater ignitability and performance over conventional spark plugs
  • Corrugated Ribs Prevent Flashover
  • Trivalent Metal Plating has superior anti-corrosion and anti-seizing properties
  • Pure Alumina Silicate Ceramic Insulator, Provides Superior Strength and Better Heat Transfer
  • Increased fuel economy and lower emissions
  • Highly durable against electrical and chemical wear
  • Triple Seals Prevent Leakage Economical performance and improved ignitability over standard NGK Spark Plugs original equipment manufacturer and racer approved.
See More

In-Demand Ignition Coils and Boots for 1997 Chevrolet Camaros

Select from 21 premium Ignition Coils and Boots parts for your 1997 Chevrolet Camaro, with prices ranging from $33.99 to $254.99.

DENSO – Original Equipment Quality Direct Ignition Coil (Part No.673-7100)

Original Equipment Quality Direct Ignition Coil

from

$39.99
As the innovator and leader in stick coil technology, DENSO has conducted superior testing and inspection processes to insure the highest quality ignition coil. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.

Product Features:
  • First Time Fit
  • Built to DENSO Original Equipment Standards
See More

Driveworks – Ignition Coil (Part No.26221)

Ignition Coil

from

$42.05
Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:
  • Direct-fit OE replacement ensures ease of installation
  • Designed to meet OE performance
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
See More

Carquest – Direct Ignition Coil Kit (Part No.E51)

Direct Ignition Coil Kit

from

$43.05
We use the finest materials and improve on OE specifications whenever possible. The result is maximum performance and longevity.

Product Features:
  • Manufactured using high-quality materials to provide superior durability and long service life
  • Designed and engineered to ensure precise performance
  • Ignition coils have solid brass high voltage terminals. The benefit is better connections and greater corrosion resistance.
See More

ACDelco – Ignition Coil (Part No.D577)

Ignition Coil

from

$71.99
An ACDelco GM Original Equipment Ignition Coil is a GM-recommended replacement for your vehicle’s original component, and undergoes more stringent testing than aftermarket products. It increases electrical system voltage to help ignite the air/fuel mixture as the starting and charging system starts the engine, maintains the battery’s charge, and provides power to the electrical accessories while the engine is running. An ACDelco GM OE Ignition Coil uses pure copper windings to improve durability and provide higher resistance to internal shorts and dielectric breakdown. Because the number and shape of the laminations determine the output characteristics of an ignition coil, ACDelco ensures that the silicone steel plates surrounding the coil correctly match the original part size and number. Since steel laminations work best when they are new, shiny, and clean, ACDelco laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed. This original equipment ignition coil has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
  • Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
  • Laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Delphi – Ignition Coil (Part No.CE20003)

Ignition Coil

from

$39.99
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.

Product Features:
  • Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
  • Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
  • Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
  • We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
See More

ACDelco – Ignition Coil (Part No.D555)

Ignition Coil

from

$77.99
An ACDelco GM Original Equipment Ignition Coil is a GM-recommended replacement for your vehicle’s original component, and undergoes more stringent testing than aftermarket products. It increases electrical system voltage to help ignite the air/fuel mixture as the starting and charging system starts the engine, maintains the battery’s charge, and provides power to the electrical accessories while the engine is running. An ACDelco GM OE Ignition Coil uses pure copper windings to improve durability and provide higher resistance to internal shorts and dielectric breakdown. Because the number and shape of the laminations determine the output characteristics of an ignition coil, ACDelco ensures that the silicone steel plates surrounding the coil correctly match the original part size and number. Since steel laminations work best when they are new, shiny, and clean, ACDelco laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed. This original equipment ignition coil has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
  • Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
  • Laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1518)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$43.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
  • Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

Carquest – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.26C1005)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$42.49
Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle’s ignition system performance.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
  • Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1023)

Ignition Coil: Meets OE Specifications, 1 Count

from

$33.99
Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle¿s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Long service life and durable performance
  • High dielectric strength for reliability
  • Corrosion-resistant connections
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
  • High reliability
  • Long service life
See More

Carquest Premium – Ignition Coil (Part No.EBC1346)

Ignition Coil

from

$37.99
Carquest Premium engine management products provide the right ignition coils for a wide range of domestic and import applications. They deliver the highest performance and durability under demanding conditions. Designed to meet OE quality and performance

Product Features:
  • Coils are designed and engineered to be an OE quality replacement for fit and performance
  • High-strength dielectric epoxy and 100% copper windings used to deliver high-temperature performance and vibration resistance
  • High-efficiency laminations produce a high-energy spark and reliable performance
  • Factories use ISO 9001 and IATF 16949 standards to deliver products designed to meet or exceed OE voltage output specifications
  • Top-quality components and materials used to deliver maximum performance and long service life under tough operating conditions
  • Long service life
See More

NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.48604)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$39.99
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience

Product Features:
  • OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
  • OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
  • EASE OF INSTALLATION: Includes mounting hardware and necessary components required for certain applications to ensure worry-free installation
  • THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
  • EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
  • PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
See More

NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.48780)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$56.99
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience

Product Features:
  • OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
  • OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
  • EASE OF INSTALLATION: Includes mounting hardware and necessary components required for certain applications to ensure worry-free installation
  • THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
  • EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
  • PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
See More

Delphi – Ignition Coil (Part No.GN10123)

Ignition Coil

from

$53.99
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.

Product Features:
  • Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
  • Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
  • Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
  • We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
See More

Carquest Premium – Ignition Coil Connector (Part No.PTA1122)

Ignition Coil Connector

from

$48.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

MSD Ignition – Wire Set; Super Conductor; Universal Chevy; LT1 with straight boot (Part No.32129)

Wire Set; Super Conductor; Universal Chevy; LT1 with straight boot

from

$254.99
For late model GM LT1 Engines, this set comes with the LT1 Boots and Terminals installed and 90 degree spark plug boots and terminals loose.

Product Features:
  • Includes straight LT1 boot
  • Extra long 8.5mm wires so you can cut to your desired length.
  • Distributor Cap – Boots and Terminals Included
  • Includes Mini-Stripper-Crimper For Factory Style Crimps
  • Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
  • Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
See More

Carquest Premium – Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit (Part No.35-8340)

Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit

from

$98.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

Carquest Premium – Ignition Coil Connector (Part No.PTA1397)

Ignition Coil Connector

from

$37.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

ACDelco – Ignition Coil (Part No.19418996)

Ignition Coil

from

$134.99
An ACDelco GM Original Equipment Ignition Coil is a GM-recommended replacement for your vehicle’s original component, and undergoes more stringent testing than aftermarket products. It increases electrical system voltage to help ignite the air/fuel mixture as the starting and charging system starts the engine, maintains the battery’s charge, and provides power to the electrical accessories while the engine is running. An ACDelco GM OE Ignition Coil uses pure copper windings to improve durability and provide higher resistance to internal shorts and dielectric breakdown. Because the number and shape of the laminations determine the output characteristics of an ignition coil, ACDelco ensures that the silicone steel plates surrounding the coil correctly match the original part size and number. Since steel laminations work best when they are new, shiny, and clean, ACDelco laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed. This original equipment ignition coil has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
  • Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
  • Laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

NGK – NGK Wire Set (Part No.51066)

NGK Wire Set

from

$97.99
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

Carquest Premium – Ignition Coil Set: Meets or Exceeds OE Specifications, 3 Count (Part No.EBC1518-3)

Ignition Coil Set: Meets or Exceeds OE Specifications, 3 Count

from

$95.99
Carquest Premium ignition coil sets meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coil sets are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coil sets with an industry-leading warranty. Carquest Premium ignition coil sets are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Built by IATF 16949 certified manufacturers for consistent durability
  • Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
  • Segmented secondary bobbins to distribute high voltage and prevent shorting
  • Extensive design validation testing to ensure long-lasting reliability
  • 100% end-of-line tested to ensure proper performance
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

ACDelco – IGNITION COIL (Part No.19418991)

IGNITION COIL

from

$81.99
IGNITION COIL

Most Sold 1997 Chevrolet Camaro Ignition Wires

Explore our best-selling Chevrolet parts for the 1997 Camaro among 10 OEM and aftermarket options starting from $1.99.

Mallory – Mallory Prosidewinder 135F Univ/Wire Set (Part No.947)

Mallory Prosidewinder 135F Univ/Wire Set

from

$153.99
Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.

Product Features:
  • Most Advanced Wire By Mallory
  • RFI Suppression
  • High Temperature Silicone Jacket
  • Withstands Over 500+F
  • Come In Ready To Use Kits
  • Extra Long Kits
See More

Mallory – Mallory Prosidewinder 90F Univ. Wire Set (Part No.937)

Mallory Prosidewinder 90F Univ. Wire Set

from

$133.99
Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.

Product Features:
  • Most Advanced Wire By Mallory
  • RFI Suppression
  • High Temperature Silicone Jacket
  • Withstands Over 500+F
  • Come In Ready To Use Kits
  • Extra Long Kits
See More

ACDelco – Specific FitSpark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core (Part No.9706X)

Specific FitSpark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core

from

$65.99
ACDelco Professional Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are a high quality replacement for many vehicles on the road today. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plugs. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

ACDelco – Ignition Wire Holder (Part No.F1060289679ACD)

Ignition Wire Holder

from

$1.99
Ignition Wire Holder

ACDelco – Spark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core, 6 Wire Set (Part No.706X)

Spark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core, 6 Wire Set

from

$52.99
ACDelco GM Original Equipment Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are GM-recommended replacements for your vehicle’s original components. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plug. These original equipment wires have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Durable to help transfer high voltage pulses without damage
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Accel – GM F-Body 5.7L 97-93 Lt1/Lt4 (Part No.9038C)

GM F-Body 5.7L 97-93 Lt1/Lt4

from

$241.99
ACCEL now offers the cure for burnt spark plug boots with Extreme 9000 Ceramic wire kits. The 8mm Ferro-Spiral core wire now has ceramic boots on the spark plug end of the wires. Ceramic boots withstand up to 2,000 degrees. Great for running headers with close tolerances, an engine bay with little room, or an RV with boots that melt because of heat. Ultra high temperature double silicone construction wire rated at 600 degrees fahrenheit peak. 500 ohms/ft Ferro-Spiral core developed for performance use. Excellent energy delivery to the spark plugs, while providing the highest level of RFI/EMI suppression. Stainless steel spark plug terminals for maximum spark energy to the plugs. Pre-made to factory lengths for a perfect fit.

Product Features:
  • Ceramic boots withstand up to 2,000░ Fahrenheit
  • Ceramic boots withstand up to 2,000° Fahrenheit
  • 8mm double silicone construction black wire rated at 600░ F rated
  • 8mm double silicone construction black wire rated at 600° F rated
  • 500 Ohms/foot ferro sprial core offers the highest level of RFI/EMI suppression
  • Universal and custom fit applications
  • Universal And Custom Fit Applications
See More

ACDelco – Ignition Wire Set (Part No.F1020582523ACD)

Ignition Wire Set

from

$131.36
Ignition Wire Set

NGK – NGK Wire Set (Part No.51094)

NGK Wire Set

from

$41.49
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

DENSO – Spark Plug Wire Set: Aluminum Steel Core, 9 Wire Set (Part No.671-8151)

Spark Plug Wire Set: Aluminum Steel Core, 9 Wire Set

from

$156.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:
  • Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
  • Identical OE end caps are designed to “click” into place for easy installation and a secure fit
  • Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
See More

Autopart International Inc – Ignition Wire Set (Part No.F10202008591API)

Ignition Wire Set

from

$83.88
Ignition Wire Set

Top-Rated Ignition and Tune-Up Products Brands For Your 1997 Chevrolet Camaro

Shop for the best-rated brands offering Ignition and Tune-Up Products and other products for your 1997 Chevrolet Camaros. Below you’ll find some of our best rated Ignition and Tune-Up Products from NGK, ACDelco, and Autolite, and more. Ignition and Tune-Up Products from these brands that fit a 1997 Camaro start at just $1.99 and are rated as high as 5 stars. OEM and aftermarket Ignition and Tune-Up Products don’t get more top quality, durable, and affordable than from the brands below.

Popular NGK 1997 Chevrolet Camaro Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 1997 Chevrolet Camaro, using quality Ignition and Tune-Up Products is essential to ensure durability and a perfect fit. NGK ticks all of those boxes. We offer a wide selection of NGK Ignition and Tune-Up Products, specifically designed for the 1997 Chevrolet Camaro. With over 15 NGK brand Ignition and Tune-Up Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $4.69, with an average price of just $24.92. Plus, with over 693 customer reviews and an average rating of 5 stars, you can trust that our NGK Ignition and Tune-Up Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Ruthenium HX High Ignitability Spark Plug: DFE Tip Design, TR5AHX
from
$14.99
This product is not rated

Ruthenium HX High Ignitability Spark Plug: DFE Tip Design, TR5AHX

“”

OE Series Laser Iridium Spark Plug: Fine Wire Tip Design, ITR5H13
from
$18.99
This product is not rated

OE Series Laser Iridium Spark Plug: Fine Wire Tip Design, ITR5H13

“”

Ruthenium HX High Ignitability Spark Plug: PSPE Tip Design, TR4BHX
from
$12.99
This product is not rated

Ruthenium HX High Ignitability Spark Plug: PSPE Tip Design, TR4BHX

“”

Popular ACDelco 1997 Chevrolet Camaro Ignition and Tune-Up Products

ACDelco auto parts is one of the highest quality Ignition and Tune-Up Product brands in the market. Any 1997 Chevrolet Camaro owner should feel confident when installing genuine ACDelco parts in their vehicle. To ensure the best fit and performance for your 1997 Camaro, Advance Auto Parts carries a full inventory of 23 ACDelco Ignition and Tune-Up Products. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these ACDelco Ignition and Tune-Up Products range from $1.99 to $570.20, plus, with more than 81 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Ignition and Tune-Up Products below will deliver on both quality and value.

Iridium Spark Plug: Original Equipment Replacement
from
$11.99
This product is not rated

Iridium Spark Plug: Original Equipment Replacement

“”

Rapidfire Spark Plug
from
$5.79
This product is not rated

Rapidfire Spark Plug

“”

FAQs for 1997 Chevrolet Camaro Ignition and Tune-Up Products

Which Ignition and Tune-Up Products are best-sellers for 1997 Chevrolet Camaros?

Out of 147 Ignition and Tune-Up Products that fit 1997 Chevrolet Camaros, the following parts are the top sellers:

What’s the price range for 1997 Chevrolet Camaro Ignition and Tune-Up Products?

Ignition and Tune-Up Product prices for the 1997 Chevrolet Camaro start at $1.99 and go up to $868.99 for the most premium parts.

What’s the average price of a Ignition and Tune-Up Product for a 1997 Chevrolet Camaro?

The average price for Ignition and Tune-Up Products for the 1997 Chevrolet Camaro is $92.59. Keep in mind the variety of part types within our Ignition and Tune-Up Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Ignition and Tune-Up Products for other Chevrolet Camaro model years?

Yes, we currently carry Ignition and Tune-Up Products for 50 model years of Chevrolet Camaros between 1967 and 2024. Ignition and Tune-Up Products are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Ignition and Tune-Up Products for my 1997 Chevrolet Camaro?

The cheapest 1997 Chevrolet Camaro Ignition and Tune-Up Products we carry in stock are:

What are the top-rated Ignition and Tune-Up Products that fit the 1997 Chevrolet Camaro?

Out of 3,451 reviews by customers, our 1997 Chevrolet Camaro Ignition and Tune-Up Products have an average customer rating of . These are some of the highest-rated Ignition and Tune-Up Product types for the 1997 Chevrolet Camaro and their top-rated products:

What types of Ignition and Tune-Up Products do you sell for my 1997 Chevrolet Camaro?

As of 2/5/25, these are some of the most in-demand types of Ignition and Tune-Up Products for a 1997 Chevrolet Camaro:

Can I get help with 1997 Chevrolet Camaro Ignition and Tune-Up Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Ignition and Tune-Up Products and more.

What is your return policy for Chevrolet Camaro Ignition and Tune-Up Products?

Advance Auto Parts keeps returns simple. For new Chevrolet Camaro Ignition and Tune-Up Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.