1997 Chevrolet Blazer Performance and Racing Products

Name: Coil Spring Isolator Set
Brand: Energy Suspension
SKU: 9.6102G
Price: 47.99 USD

Below you will find various in-demand Chevrolet Performance and Racing Products, components and accessories for your 1997 Blazer. Advance Auto Parts has popular Blazer parts like Performance Ignition Products, Performance Steering Products, Performance Exhaust Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Blazer model years including 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2019 and more. Select a category of 1997 Chevrolet Blazer Performance and Racing Products below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1997 Chevrolet Blazer Performance and Racing Products Categories

Performance Intake Manifolds

Performance Coils

Performance Air Intake Kits

Engine Cold Air Intakes

Performance Shifters

Performance Distributors

Performance Body Mounts

Performance Engine and Transmission Mounts

Performance Distributor Rotors

Performance Distributor Components

Performance Coil Spring Insulators

Performance Engine Timing Sets and Components

Performance Engine Valve Springs

Performance Flywheel and Flexplates

Performance Exhaust Manifold Gaskets

Performance Leaf Spring Bushings

Performance Upper Performance Control Arm Bushings

Performance Chassis Bump Stops

Performance Distributor Caps

Performance Engine Rocker Arms

Performance Engine Camshafts

Performance Ring and Pinions

Performance Ignition Parts

Performance Sway Bar Link Kits

Performance Lower Control Arm Bushings

Performance Engine Valve Lifters

Performance Sway Bar Bushings

Performance Tie Rod End Boots

Performance Transmission Shift Kits

Performance Brake Hose Kits

Performance Torque Converters

Essential Performance and Racing Products for 1997 Chevrolet Blazers

from

$47.99

Made of superior Hyper-Flex material. Saves replacing again and again, lasting 3 to 10 times longer. Assemble to chassis the same way as OEM isolators and do not adversely change ride characteristics.

Product Features:

Made of Superior Hyper-Flex+ Material
Lasts from 3 to 10 Times Longer
Assemble to Chassis Same Way as OEM
Maintains Factory Ride Characteristics
Simple Way to Increase Vehicle Height

from

$371.99

The B&M Sport Shifter features, Neutral safety switch, backup light switch, lighted gear indicator and black T-Handle and cable. Fits Most 3 and 4 Speed applications.

Product Features:

Base Trims For Custom Fit
Neutral Safety Switch
Backup Light Switch
Lighted Gear Indicator
Black T-Handle and Cable

from

$395.99

HYDRAULIC – Mutha’ Thumpr: High performance street/strip, needs 9:1 compression, 2500+ stall, intake, gears and headers, rough idle.

Product Features:

HYDRAULIC – Mutha’ Thumpr: High performance street/strip, needs 9:1 compression, 2500+ stall, intake, gears and headers, rough idle.
287/304 Advertised Duration, 235/249 Duration @ .050″, .510″/.495″ Lift, 107 Lobe Separation
Valve spring upgrade required

from

$55.99

If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.

Product Features:

Improved output coil for electronic ignitions
Works w/Blaster Ignition Or MSD 5/6/7 Series
Ballast Resistor Required If Used w/Stock Points Ignition
Alkyd tower w/high dielectric properties lessens carbon tracking

from

$339.99

Edelbrock part #2703 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent thro

Product Features:

Idle-5500 RPM Range
Dual Plane Type-4150 Style Flange
3.74 in. Front Height, 4.27 in. Center Height, 4.8 in. Rear Height
Satin Finish
Non-EGR W/ Oil Fill Tube

from

$101.99

Mr. Gasket competition screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street and race applications.

Product Features:

Black Oxide Coated Grade 8 Steel
Kit Contains 16 Studs
Easy To Install
Heat Treated Steel
Prevents Stud Flexing
Black Plated Finish

from

$86.99

The B&M Shift Improver Kit the easiest way to get the performance you’ve always wanted out of your automatic transmission, two modes to select from: Heavy Duty, or Street/Strip. It’s our least expensive and simplest to install kit.

Product Features:

Provides Crisp Shifts
On Any Stock Automatic Transmission
Eliminates Soft/Sluggish Shift
Eliminates Shift Overlap
Eliminate Clutch and Band Wear
Improves Transmission Life
Transmission Removal Not Required

from

$32.99

ACCEL Hi-Performance rotors offer superior protection from arc-thru and crossfire. Features hi-performance 60,000 volt alkyd compound, stress-relieved at molding to ensure stability and resist centrifugal forces at high racing RPMs.

Product Features:

Max stability for all RPM ranges
Heavy duty for maximum energy transfer
Fits Most Stock And Modified Distributors
Polyester Glass Filled For Durability

from

$665.99

The Chevrolet HEI distributor is a favorite for muscle cars, street rods and even circle track racers. The integrated coil keeps under mount wiring clean, and for race cars, the idea of running one wire to the distributor keeps things simple. However, when it comes to performance, the stock HEI falls short. MSD answers the need for a strong, accurate and high performance HEI with our Pro-Billet HEI. The distributor is supplied with our digital HEI module and coil so there is plenty of spark energy combined with improved dwell and timing control. Tig welded on top of the distributor shaft is MSD’s adjustable centrifugal advance assembly. Three sets of springs and four stop bushings let you dial in up to 24 different timing curves to match your driving needs. Plus, there’s a vacuum advance for those concerned with economy. All of this is assembled around a precision and great looking CNC machined housing.

Product Features:

Complete performance HEI distributor upgrade for Chevy V8 engines
Supplied w/Brass Terminal Distributor Cap And Rotor
Full Spark Energy Output To 9000 Rpm
An 8.5 amp; single spark; inductive discharge ignition module
Includes MSD PN[83647] and MSD HEI Coil PN[8225]
Special oil tract improves lubrication to the dist./cam gear
Nylon pads ensure smooth operation of the advance weights
Advance weight pins are staked and tig welded to the plate

from

$921.99

HoleShot 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: HoleShot 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot c

Product Features:

Furnace Brazed Impeller
Steel Alloy Pump Drive Tube
Heavy Duty Needle Bearing
Between Stator and Turbine
Furnace Brazed Turbine

from

$54.99

Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$99.99

Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

Product Features:

Made of Superior Hyper-Flex+ Material
Adds Dramatic Amount of Performance/Durability
Helps Vehicle Be in Control
Allows the Suspension to Function Properly

from

$367.99

The K&N AirCharger 63-1007-1 air intake system replaces your vehicle’s restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your vehicle’s engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 63-1007-1 air intake places a round K&N high-flow air filter directly on top of the throttle body allowing large volumes of air to be pulled into the engine delivering a guaranteed gain in horse power. The oversized air filter is capped with an impressive chrome lid for added visual appeal under the hood. This air intake is relatively easy to install using commonly available tools. Not legal for sale or use in California on any pollution controlled motor vehicle.

Product Features:

Guaranteed horsepower gain
Designed to improve throttle response and engine sound
Free-flowing high density polyethylene tube
Replaces entire factory air intake system
K&N No-Hassle Lifetime Limited Warranty
Easy to install, usually in 60 minutes or less
DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
HIGH QUALITY: Made in America.

from

$12.29

Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Hyper-Flex performance polyurethane bump stops for control arms, traction bars, leaf springs, etc. are guaranteed to last longer and operate more efficiently than original rubber stops. The smaller, general purpose bullet shaped snubber is ideal for control arms. the low profile button head is for use when clearance is limited. Our large competition race style bump stops smooth out compression better and have a large reinforced metal plate welded to the mounting plate and molded-in. Each style is specially designed for a perfect and custom fit and each style has it’s own durometer, hardness, characteristics. Energy’s wide selection of bump stops are available in red or black color.

Product Features:

Made of Superior Hyper-Flex+ Material
Helps Prevent Damage to Control Arm

from

$322.99

Product Features:

GM 10BL 8.5 R/P 3.42 FRT/REAR MGP

from

$6.29

Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$66.99

COMP Cams High Energy Timing Chain Sets include precision cast iron camshaft and crank gear sprockets and premium quality link belt type timing chain. These sets exceed all original equipment timing chain specifications and are ideal for stock replacement and mild performance applications.

Product Features:

Exceeds all original equipment timing chain specifications
Premium quality link belt type chain for exceptional durability; chain also available separately
Precision cast iron camshaft and crank gear sprockets
Ideal for stock replacement and mild performance applications

from

$61.99

For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$121.99

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$97.99

A true performance application component for cars, trucks, hot rods, racing/competition, yet popularly used for street vehicles when more horsepower is added. Soft running enough to absorb vibrations for street use yet rugged for racing use. Helps control torque on high performance vehicles. Maintains proper drive shaft angle to help prevent early wear and unexpected power train damage. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal transmission mounts. Resistant to under vehicle fluid oils, coolants and road contaminants. Made of Energy’s Hyper-Flex performance polyurethane and heavy duty hardware – for added durability.

Product Features:

Unique Safety Interlock Design
Impervious to Vehicle Oils and Chemicals
Strong Enough Too Handle High Performance

from

$53.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$99.99

Russell’s wide variety of lightweight aluminum adapter fittings allow for the connection of Russell hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel f

from

$367.99

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

Product Features:

Guaranteed to increase horsepower and torque
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 60 minutes or less with simple hand tools
No-Hassle Lifetime Limited Warranty
Will not void vehicle warranty(limited)

from

$88.99

With the introduction of our 20 Amp extreme HEI module, we needed an HEI cap and rotor that could withstand the high output. The answer was to mold our own HEI cap, rotor and coil cover. The cap and rotor will fit our HEI Pro-Billet distributor, PN 8365.

Product Features:

Designed w/performance in mind
High quality; voltage insulating material
Stainless Terminals
High dielectric properties

from

$17.99

Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

Product Features:

Made from hi-performance 60 KV rated alkyd molding compound.
Cap and rotor kits include nylon rotor hold-down screws.
Flame-Thrower dust covers provide a larger air gap around the coil.

from

$34.49

Product Features:

Service Part
Makes Connections Quick And Easy

from

$173.99

As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for 1955-85 GM small block (internally balanced) V8 engines along with 4.3L V6 engines. Also fits 1990 and earlier GM big block (internally balanced) V8 engines with two piece rear main seal. Features include high tensile strength steel construction to resist elongation and cracking, dual bolt pattern 10.75 or 11.5 inch converter mounting locations, 168 tooth ring gear with double-sided welds for added strength and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953. Compatible with Powerglide, TH350, TH400 and TH700R4 automatic transmissions.

Product Features:

NHRA/IHRA Legal For All Classes
Includes SFI Certification Sticker
Ideal For Street Applications
To Extreme Duty Racing
To High RPM Use

from

$170.99

Constructed of thicker than stock steel plate to withstand the stress of high stall speed converters and high RPM engine. Zinc dichromate plated to resist rust and corrosion. Meets SFI specification 29.1 for racing.

Product Features:

Thicker Than Stock Steel Plate
Ring Gear Securely Welded
Dual Bolt Patterns
Zinc-Dichromate Plated To Resist Corrosion
Withstands High Torque and RPM

Upgrade your 1997 Chevrolet Blazer with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1997 Chevrolet Blazer, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Performance and Racing Products are key to keeping your Blazer functioning at its best. At Advance Auto Parts, we offer a wide selection of 89 Performance and Racing Products for the 1997 Chevrolet Blazer, designed to meet your needs without breaking the bank. From Performance Ignition Product replacements to Performance Steering Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1997 Chevrolet Blazer at great prices. Our Performance and Racing Products inventory for this model ranges from just $5.99 to $921.99, with an average price of $266.23. Our 89 Performance and Racing Products in stock come from 14 trusted brands, so you’re sure to find the right part for your 1997 Chevrolet Blazer without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1997 Chevrolet Blazer, we stock popular OEM and aftermarket Performance and Racing Products from top names like Energy Suspension, B & M, Accel, and more. Energy Suspension Performance and Racing Products start at just $5.99 and boast an impressive 4.4 stars average rating from customers. B & M and Accel also bring quality to the table, with Performance and Racing Products available starting at $32.99, and at an average 4.1 stars rating. With 160 customer reviews and counting, our 1997 Chevrolet Blazer Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1997 Chevrolet Blazer is always ready to roll. We’re committed to providing you with everything you need to keep your Blazer in top shape, all in one place. Start shopping confidently below for your 1997 Chevrolet Blazer!

Best-Selling Performance Ignition Products for 1997 Chevrolet Blazers

Enhance the driving experience in your Chevrolet with 3 quality Performance Ignition Product components, starting at $85.99.

show more show less

from

$95.99

Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:

Service Part
No Moving Parts To Wear Out
Self Contained Unit
Can Drive OEM
Can Drive High Performance Ignition Coils

from

$85.99

When it comes to late model performance parts, nothing beats bolt-on and direct connection components. These new bolt-in coils are designed with improved materials and windings to produce a stronger output. GM single connector coil PN 8231. Used on 1996 to 1999 General Motors vehicles. Installation tip: if you plan to install an MSD Ignition with this coil, use a PN 8877 harness for a direct plug-in installation.

Product Features:

Direct performance replacement coil for GM 1996-1999
80:1 turns ratio
Lower Primary Resistance Produces High Voltage Output
Works w/Stock Ignition As Well As MSD Ignitions

from

$204.99

Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:

Glass Filled Polyester Case
Longer Spark Duration
Increased Performance
No Energy Loss Due To Arcing
Includes Brass Contact Terminal

Most Popular 1997 Chevrolet Blazer Performance Steering Products

Customize your Chevrolet with 8 Performance Steering Products products like Performance Sway Bar Link Kits, Performance Tie Rod End Boots, and Performance Sway Bar Bushings, all priced under $240.99.

show more show less

from

$5.99

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$5.99

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$6.29

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$54.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$240.99

Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:

Assures Longer Lasting Cab to Bed Alignment
Replace to Restore Ride Height
Gain Durability
Stronger Than Original Rubber Mounts

from

$54.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$51.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$53.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

Top Picks for 1997 Chevrolet Blazer Performance Exhaust Products

Upgrade Chevrolet Blazers with top-quality Performance Exhaust Products parts, including 1 OEM and aftermarket selections for your 1997 model.

show more show less

from

$28.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
Slotted bolt holes allow for easier header installation.
Not intended for use in emission controlled vehicles.

In-Demand Performance Distributors for 1997 Chevrolet Blazers

Select from 4 premium Performance Distributors parts for your 1997 Chevrolet Blazer, with prices ranging from $32.99 to $614.99.

show more show less

from

$614.99

Starting on the inside, a 0.500 In. oversized steel shaft spins in a sealed ball bearing and sintered bushing for long endurance and accurate spark delivery throughout the entire RPM range. Mounted on top of the shaft is an easy-to-adjust chromoly mechanical advance assembly. Different advance springs and stop bushings are supplied so you can choose from 24 curves. A maintenance-free magnetic pick-up provides accurate trigger signals to your MSD Ignition control. A precision-manufactured reluctor that is connected to the shaft is responsible for triggering the pick-up. The distributor is topped off with a high quality black cap and race rotor.

Product Features:

CNC machined billet aluminum housing and billet aluminum base
Will not accept a vacuum advance canister
Must Be Used w/An MSD Ignition Control
O-ring seals can be installed for oil press. control (Mods only)
Supplied w/Socket Style Distributor Cap And Rotor
Special oil tract improves lubrication to the dist./cam gear
Nylon pads ensure smooth operation of the advance weights
Advance weight pins are staked and tig welded to the plate

from

$32.99

Max stability for all RPM ranges
Heavy duty for maximum energy transfer
Fits Most Stock And Modified Distributors
Polyester Glass Filled For Durability

from

$84.99

ACCEL Heavy-Duty Caps offer superior protection from arc-thru and crossfire. Features hi-performance 60,000 volt alkyd compound, stress-relieved at molding to ensure stability.

Product Features:

Fits Most Stock And Modified Distributors
Brass inserts provide for high spark energy flow
Polyester Glass Filled For Durability
Heavy duty for maximum energy transfer

from

$60.99

This gear test fixture features variable rpm and oil pressure control allowing MSD engineers the ability to maintain the exact conditions that they want for gear tests. Severe loads can be placed on the gear and the fixture can spin up to 10,000 rpm. Features increased outer hardened layer thickness (RC 55-60). Micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.

Product Features:

Increased outer hardened layer thickness (RC 55-60)
Micro Polished Surface For Smooth Contact
Proprietary formulated ductile iron.
Melonite QPQ coated reduces friction and initial wear
Interstitial carbide improves wear resistance/running properties

Most Sold 1997 Chevrolet Blazer Performance Engines

Explore our best-selling Chevrolet parts for the 1997 Blazer among 25 OEM and aftermarket options starting from $8.99.

show more show less

from

$18.29

These grade 5 socket head bolts are zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8-16 x 1 inch bolts & washers.

Product Features:

Grade 5 socket head bolts are zinc plated for protection and appearance
Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds
Washers Included

from

$459.99

Similar in performance to the Holeshot series, the Tork Master is B&M’s lowest cost torque converter. The Tork Master is an excellent all-around performance street converter. The best ‘value priced’ street converters available.

Product Features:

New Precision Pump Drive Tube
Pressure Tested
Fully Balanced
Needle Thrust Bearing
New Thrust Washer

from

$921.99

The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, New turbine hub and dual pattern drive lugs on some GM Holeshots.

Product Features:

Furnace Brazed Impeller
Steel Alloy Pump Drive Tube
Heavy Duty Needle Bearing
Between Stator and Turbine
Furnace Brazed Turbine

Magnum Computer Controlled 215/220 Hydraulic Roller Cam Chevrolet 262/4.3L V6

from

$815.99

Magnum Computer Controlled 215/220 Hydraulic Roller Cam Chevrolet 262/4.3L V6

Magnum 206/206 Hydraulic Roller Cam for Chevrolet 262/4.3L V6

from

$815.99

Magnum 206/206 Hydraulic Roller Cam for Chevrolet 262/4.3L V6

Magnum Computer Controlled 210/215 Hydraulic Roller Cam Chevrolet 262/4.3L V6

from

$815.99

Magnum Computer Controlled 210/215 Hydraulic Roller Cam Chevrolet 262/4.3L V6

Magnum 224/224 Hydraulic Roller Cam for Chevrolet 262/4.3L V6

from

$815.99

Magnum 224/224 Hydraulic Roller Cam for Chevrolet 262/4.3L V6

Magnum 215/220 Hydraulic Roller Cam For Chevrolet 262/4.3L

from

$611.99

Magnum 215/220 Hydraulic Roller Cam For Chevrolet 262/4.3L

Magnum Computer Controlled 210/215 Hydraulic Roller Cam For Chevrolet 262/4.3L

from

$611.99

Magnum Computer Controlled 210/215 Hydraulic Roller Cam For Chevrolet 262/4.3L

Magnum 224/224 Hydraulic Roller Cam For Chevrolet 262/4.3L

from

$611.99

Magnum 224/224 Hydraulic Roller Cam For Chevrolet 262/4.3L

from

$483.99

Torque Converter – Tork Master 2400 for GM 1993 to 1996 TH700R4 (30 spline) 1984 to 1993 and 4L60E (30 spline) APPLICATION: Tork Master 2400 for GM 1993 to 1996 TH700R4 (30 spline) 1984 to 1993 and 4L60E (30 spline) The Tork Master is B&M’s lowest cost pe

Product Features:

New Precision Pump Drive Tube
Pressure Tested
Fully Balanced
Needle Thrust Bearing
New Thrust Washer

from

$399.99

ENGINE ROCKER ARM

from

$312.99

XE 206/206 HFT4.3

from

$312.99

XE 212/212 HFT4.3

from

$285.99

RKR1.524.3

Magnum Double Row Timing Set for OE Roller Chevrolet V6 and 305-350 Small Block

from

$119.99

Magnum Double Row Timing Set for OE Roller Chevrolet V6 and 305-350 Small Block

from

$57.99

Engine Valve Spring Kit

Endure-X Solid Roller Lifter for Chevrolet V6 and Small Block

from

$55.99

Endure-X Solid Roller Lifter for Chevrolet V6 and Small Block

from

$51.99

ENGINE ROCKER ARM

from

$50.99

ENGINE ROCKER ARM

from

$50.99

ENGINE ROCKER ARM

from

$50.99

ENGINE ROCKER ARM

from

$15.99

Camshaft Bolts for Chevrolet V8 and V6

from

$9.99

Engine Valve Spring

Top-Rated Performance and Racing Products Brands For Your 1997 Chevrolet Blazer

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1997 Chevrolet Blazers. Below you’ll find some of our best rated Performance and Racing Products from Energy Suspension, B & M, and Accel, and more. Performance and Racing Products from these brands that fit a 1997 Blazer start at just $5.99 and are rated as high as 4.4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular Energy Suspension 1997 Chevrolet Blazer Performance and Racing Products

When it comes to maintaining or upgrading your 1997 Chevrolet Blazer, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Energy Suspension ticks all of those boxes. We offer a wide selection of Energy Suspension Performance and Racing Products, specifically designed for the 1997 Chevrolet Blazer. With over 3 Energy Suspension brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $5.99, with an average price of just $21.59. Plus, with over 22 customer reviews and an average rating of 4.4 stars, you can trust that our Energy Suspension Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $5.99

(3)

Tie Rod Dust Boot

“Replaced the old torn boot and added a bit of color for a low cost.”

from $46.49

(17)

High Performance Transmission Mount for Street & Racing Vehicles

“The best you can buy. Don’t be a cheap skate. Spend a little extra and get the good stuff. I used in 72′ chevy C-10. Has been restrored has 425 hp wit”

from $12.29

(2)

Control Arm Bump Stop Set

“good quality part”

Popular B & M 1997 Chevrolet Blazer Performance and Racing Products

B & M auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1997 Chevrolet Blazer owner should feel confident when installing genuine B & M parts in their vehicle. To ensure the best fit and performance for your 1997 Blazer, Advance Auto Parts carries a full inventory of 3 B & M Performance and Racing Products. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these B & M Performance and Racing Products range from $349.99 to $539.99, plus, with more than 3 customer reviews and an impressive 4.1 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

from $349.99

(1)

Automatic Shifter, StarShifter

“while I was looking this shifter over and found it wouldn’t work for my application, I found it to be as beautiful as the B&M shifter I had in my othe”

from $539.99

(1)

Automatic Shifter – Megashifter – Universal

“its was pretty easy to install if u have any type of knowlegde of cars it should not be difficult at all and the shifting is awesome just be careful w”

from $371.99

(1)

Automatic Shifter, Sport Shifter

“This is a sweetly made product with that hotrod look and feel.This shifter was easy to install and a knock out to drive.No down falls as far as I’m aw”

FAQs for 1997 Chevrolet Blazer Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1997 Chevrolet Blazers?

Out of 89 Performance and Racing Products that fit 1997 Chevrolet Blazers, the following parts are the top sellers:

High Performance Transmission Mount for Street & Racing Vehicles (16360003) – $46.49
Intake Manifold Bolts (6120970) – $18.29
Tie Rod Dust Boot (17360821) – $5.99

What’s the price range for 1997 Chevrolet Blazer Performance and Racing Products?

Performance and Racing Product prices for the 1997 Chevrolet Blazer start at $5.99 and go up to $921.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1997 Chevrolet Blazer?

The average price for Performance and Racing Products for the 1997 Chevrolet Blazer is $266.23. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Chevrolet Blazer model years?

Yes, we currently carry Performance and Racing Products for 24 model years of Chevrolet Blazers between 1969 and 2019. Performance and Racing Products are bought most frequently for the following model years: 2019, 2005, 2004, 2003, 2002, 2001, 2000, 1999, and 1998.

What are the cheapest Performance and Racing Products for my 1997 Chevrolet Blazer?

The cheapest 1997 Chevrolet Blazer Performance and Racing Products we carry in stock are:

Tie Rod Dust Boot (17360821) – $5.99
Tie Rod Dust Boot (17360833) – $5.99
Tie Rod Dust Boot (22906873) – $6.29
Camshaft Bolt for Chevrolet V8 and V6 (50288779) – $8.99
Engine Valve Spring (50286657) – $9.99

What are the top-rated Performance and Racing Products that fit the 1997 Chevrolet Blazer?

Out of 160 reviews by customers, our 1997 Chevrolet Blazer Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1997 Chevrolet Blazer and their top-rated products:

Performance Shifters
- Automatic Shifter – Megashifter – Universal (6900895) – $539.99
- Automatic Shifter, Sport Shifter (17130066) – $371.99
- Automatic Shifter, StarShifter (6274609) – $349.99
Performance Air Intake Kits
- Automatic Shifter – Megashifter – Universal (6900895) – $539.99
- Automatic Shifter, Sport Shifter (17130066) – $371.99
- Automatic Shifter, StarShifter (6274609) – $349.99

What types of Performance and Racing Products do you sell for my 1997 Chevrolet Blazer?

As of 3/1/26, these are some of the most in-demand types of Performance and Racing Products for a 1997 Chevrolet Blazer:

Can I get help with 1997 Chevrolet Blazer Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Performance and Racing Products and more.

What is your return policy for Chevrolet Blazer Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Chevrolet Blazer Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1997 Chevrolet Blazer Performance and Racing Products

Energy Suspension – Coil Spring Isolator Set (Part No.9.6102G)

B & M – Automatic Shifter, Sport Shifter (Part No.80776)

Competition Cams – Thumpr 235/249 Hydraulic Flat Cam (Part No.11-601-4)

MSD Ignition – Blaster 2 Coil: High Performance Ignition Upgrade (Part No.8202)

Edelbrock – Performer EPS Intake Manifold w/ Oil Fill Tube for 1955-86 Small-Block Chevy (Part No.2703)

Mr. Gasket – Ultra Seal: Competition Screw-In Rocker Arm Studs (Part No.1074)

B & M – Shift Improver Kit For 93-02 4L60E (Part No.70360)

Accel – High-Performance Distributor Rotor for GM 4.3L-7.4L Engines (Part No.130141)

MSD Ignition – Distributor; Billet GM HEI (Part No.8365)

B & M – Holeshot 3000 (Part No.20413)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5207G)

Energy Suspension – Leaf Spring Bushing Set (Part No.3.2128R)

K&N – Cold Air Intake: Adds Up To 7 Horsepower, With Washable Air Filter (Part No.63-1007-1)

Energy Suspension – Control Arm Bump Stop Set (Part No.3.9102G)

Motive Gear – Performance Differential Ring and Pinion (Part No.G885342)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13102R)

Competition Cams – High Energy Timing Set (Part No.3200)

Energy Suspension – Control Arm Bushing Set (Part No.3.3170R)

Energy Suspension – Control Arm Bushing Set (Part No.3.3162G)

Energy Suspension – Transmission Mount (Part No.3.1129G)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5122R)

Russell – Street Legal, K-10/K-20 P/U-Blazer, Suburban with 4" lift (Part No.695710)

K&N – Cold Air Intake: Adds Up To 7 Horsepower, With Washable Air Filter (Part No.57-3009)

MSD Ignition – Distributor Cap; Extreme Output; GM HEI (Part No.84111)

PerTronix – D4062 Flame-Thrower HEI Distributor Rotor Blue (Part No.D4062)

Mallory – Distributor Wiring Harness (Part No.29349)

B & M – Flexplate, SFI 29.1 Approved, Fits 168-Tooth, 2-Piece Rear Main Seal, Chevy V8 (Part No.20230)

Hays – Flexplate: Chevy 57-85 (153T) (Part No.10-012)

Mallory – Unilite Ignition Module (Part No.605)

MSD Ignition – Coil; GM; External Single Connector; 96-97 (Part No.8231)

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101G)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13102R)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5207R)

Energy Suspension – Body Cab Mount Set (Part No.3.4132G)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5207G)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5190R)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5122R)

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1402)

MSD Ignition – Distributor; Billet; Chevy V6 Even-Fire (Part No.8597)

Accel – High-Performance Distributor Rotor for GM 4.3L-7.4L Engines (Part No.130141)

Accel – Chevy/GMC Vortec V6 High Performance Distributor Cap (Part No.120142)

MSD Ignition – Distributor Gear; MSD Chevy Distributor; .500 ID; Iron (Part No.8531)

Mr. Gasket – Intake Manifold Bolts (Part No.955G)

B & M – Tork Master 2000: Value-Priced Street Performance Torque Converter (Part No.70420)

B & M – Torque Converter, Holeshot 3000 (Part No.70421)

Competition Cams – Magnum Computer Controlled 215/220 Hydraulic Roller Cam Chevrolet 262/4.3L V6 (Part No.56-460-8)

Competition Cams – Magnum 206/206 Hydraulic Roller Cam for Chevrolet 262/4.3L V6 (Part No.56-410-8)

Competition Cams – Magnum Computer Controlled 210/215 Hydraulic Roller Cam Chevrolet 262/4.3L V6 (Part No.56-450-8)

Competition Cams – Magnum 224/224 Hydraulic Roller Cam for Chevrolet 262/4.3L V6 (Part No.56-430-8)

Competition Cams – Magnum 215/220 Hydraulic Roller Cam For Chevrolet 262/4.3L (Part No.09-422-8)

Competition Cams – Magnum Computer Controlled 210/215 Hydraulic Roller Cam For Chevrolet 262/4.3L (Part No.09-415-8)

Competition Cams – Magnum 224/224 Hydraulic Roller Cam For Chevrolet 262/4.3L (Part No.09-430-8)

B & M – Tork Master 2400 (Part No.70418)

Competition Cams – ENGINE ROCKER ARM (Part No.1617-12)

Competition Cams – XE 206/206 HFT4.3 (Part No.18-119-4)

Competition Cams – XE 212/212 HFT4.3 (Part No.18-123-4)

Competition Cams – RKR1.524.3 (Part No.RPR200-12)

Competition Cams – Magnum Double Row Timing Set for OE Roller Chevrolet V6 and 305-350 Small Block (Part No.2136)

Competition Cams – Engine Valve Spring Kit (Part No.980-12)

Competition Cams – Endure-X Solid Roller Lifter for Chevrolet V6 and Small Block (Part No.818-1)

Competition Cams – ENGINE ROCKER ARM (Part No.1605-1)

Competition Cams – ENGINE ROCKER ARM (Part No.1601-1)

Competition Cams – ENGINE ROCKER ARM (Part No.1602-1)

Competition Cams – ENGINE ROCKER ARM (Part No.1617-1)

Competition Cams – Camshaft Bolts for Chevrolet V8 and V6 (Part No.4611-3)

Competition Cams – Engine Valve Spring (Part No.980-1)