1997 BMW 540i Cooling and Climate Controls
More 1997 BMW 540i Cooling and Climate Controls Categories
If you’re looking for an original Cooling and Climate Controls replacement for a 1997 BMW 540i, you can search through our selection below. You’ll also find aftermarket and OEM Cooling and Climate Controls to meet your needs.
Essential 1997 BMW 540i Cooling and Climate Controls
Febi – Water Pump Pulley (Part No.G3020151353FEB)
from
$58.19
Water Pump Pulley
Permatex – Ultra Grey RTV Silicone Gasket Maker, 0.5 OZ (Part No.22074)
from
$6.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.
Product Features:
See More
Product Features:
- High torque and rigidity
- Sensor-safe, non-corrosive formula
- OEM specified
- Low-odor, non-corrosive formula
- Ideal for closed spaced bolt patterns
NTK – Engine Coolant Temperature Sensor (Part No.EF0086)
from
$29.99
The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.
Product Features:
See More
Product Features:
- OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
- FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
- THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
APA/URO Parts – Radiator Mount (Part No.G102075974APA)
from
$3.06
Radiator Mount
APA/URO Parts – Climate Control Button Set (Part No.R2023319848APA)
from
$135.47
Climate Control Button Set
Carquest Premium – HVAC Blower Motor Resistor (Part No.RUC1896)
from
$139.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
KAI – Radiator Fan Shroud For Models With Inline 6-Cylinder Engine (Part No.BM3110103)
from
$79.99
New Platinum Pro Radiator Fan Shroud, Inline 6 Cylinder Engine
Product Features:
See More
Product Features:
- Inline 6 Cylinder Engine
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Geba – Geba Water Pump (Part No.G3000655251GEB)
from
$139.48
The GEBA Water Pump contains no remanufactured components and is manufactured to ensure high efficiency and optimal cooling under all conditions. Geba maintenance free Bearings with ball and roller spindle bearings are designed for the highest axial and radial stresses. Up to Date unitized sealing technology ensure optimal leak tightness and longevity. All housings are examined before the assembly. This procedure guarantees high reliability and life span of GEBA water pumps.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application.
- 100% new with no remanufactured parts.
- High quality cast aluminum.
- Advanced bearing design for high axial and radial stresses.
- Unitized sealing technology that ensures optimal leak tightness and longevity.
- Optimum cooling performance and longevity.
Dorman – A/C Condenser Fan Assembly: Cost Effective And Reliable (Part No.621-204)
from
$181.99
This A/C condenser fan assembly is precision-engineered to match the fit and performance of the stock condenser fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it functions as effectively as the original part.
Product Features:
See More
Product Features:
- Ideal replacement – this air conditioner condenser fan assembly is engineered to match the fit and performance of the stock condenser fan on specific vehicles
- Complete package – assembly is designed with the same materials and components as the original part
- Quality assured – components are tested in laboratory settings to ensure performance
- Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership
Carquest Premium – Blower Motor: With Wheel (Part No.75011)
from
$148.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.
Product Features:
See More
Product Features:
- Meets or exceeds OE design and performance
- Magnetic size and properties compare or exceed OEM
- Windings meet or exceed OEM specifications
- Motor RPM equivalent to or exceeds OEM motor
Carquest Premium – Integrated Housing Thermostat-221 Degrees w/ Seal (Part No.49502)
from
$78.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
KAI – A/C Compressor, L6 Engine (Part No.ACP011470)
from
$414.99
New Standard Replacement A/C Compressor, L6 Engine
Product Features:
See More
Product Features:
- L6 Engine
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
ACM – A/C Receiver Drier (Part No.R104081964ACM)
from
$47.84
The ACM A/C Receiver Drier is manufactured to exact OEM specifications for quality fit and performance.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit Application.
- Meets or exceeds the vehicle manufacturer specifications.
- Utilizes factory style fittings and connectors.
- Includes the required o-rings and associated hardware
Felpro – Engine Coolant Outlet Gasket (Part No.36054)
from
$17.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design
- Manufactured for the sealing repair environment
- Validated for fit, form, and function
- Quality that you can trust
Carquest Premium – AC Pressure Switch (Part No.ACC1669)
from
$63.99
The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Switch monitors system pressures, aiding in proper and efficient control of the compresso
Product Features:
See More
Product Features:
- Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to meet or exceed OE performance and to meet the uncompromising demands of service professionals.
- Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Switch.
- All units are tested using advanced end-of-line equipment that pressurize the A/C Pressure Switch, confirm proper calibration and functionality, and check for leaks to ensure each A/C Pressure Switch meets manufacturing specifications before packaging.
- All units are tested using automated end-of-line testing equipment pressurizing the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging.
Vaico – Radiator Mount Brack (Part No.G102157969VCO)
from
$3.91
Radiator Mount Brack
Vaico – Fan Shroud Rivet (Part No.G502575975VCO)
from
$1.27
Fan Shroud Rivet
Nissens – Nissens A/C Condenser (Part No.R103081970NSS)
from
$195.33
Nissens manufactures an A/C Condenser that is the same quality fit and performance of the OE Condenser it replaces.
Product Features:
See More
Product Features:
- OEM Quality Direct fit Application
- Utilizes fixed feeder tubes with no fault tolerance in length, diameter and bending angle, providing protection against leaks and loss of efficiency.
Carquest Premium – Thermostatic Operated Electric Heater Valve (Part No.74892)
KAI – A/C Expansion Valve (Part No.ACX010574)
from
$34.99
New Standard Replacement A/C Expansion Valve
Product Features:
See More
Product Features:
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Imperial – Electric Fan – 14" Diameter (Part No.226114)
from
$99.99
Product Features:
See More
- Motors built and tested to quality specifications
- 14 in. universal fit reversible fan
- 1250 CFM
- UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
Febi – Coolant Level Sensor (Part No.G105021138FEB)
from
$23.32
Coolant Level Sensor
Victor Reinz – Engine Coolant Pipe O-Ring (Part No.41-10452-00)
from
$5.49
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Vemo – Engine Cooling Auxiliary Thermo-Fan Switch (Part No.G5030138809VMO)
from
$66.84
The Vemo Engine Cooling Thermo-Fan Switch is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Corrosion resistant housings
- Nickel-plated or brass terminals for superior conductivity
- High-temp composite O.E.M.-type connectors designed to mate with vehicle wiring harness without modification
- Thermal switches matched to OEM temperatures to assure consistent performance
APA/URO Parts – Radiator Drain Plug (Part No.G1060266550APA)
from
$8.29
Radiator Drain Plug
KAI – Coolant Reservoir (Part No.BM3014103)
from
$54.99
New Platinum Pro Coolant Recovery Tank
Product Features:
See More
Product Features:
- Made Of Plastic
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Rein – Expansion Tank (Part No.EPT0013)
from
$56.99
Rein Automotive OE quality expansion tanks, install, fit and perform the way the original manufacturer intended. These tanks are designed to match or exceed the OE materials used and are produced from virgin plastic with no regrind to prevent cracking from heat cycles and ensure the plastic is durable and will have a long service life.
Product Features:
See More
Product Features:
- Produced from virgin plastic meeting/exceeding OE specifications and ensuring long life
- Resistant to cracking and wear from heat cycles preventing coolant loss
- Direct fitment allows easy installation
- Manufactured to strict engineering standards/specifications in materials and tolerances
Behr – Expansion Tank (Part No.G103035521BEH)
from
$68.72
The Behr expansion tank is made of the highest quality materials and is engineered to meet or exceed the OEM specifications for performance, fit and durability.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct Fit for easy Installation.
- OE style connections and fittings.
- Made of highly durable materials.
- Resistant to thermal wear and cracking.
Popular 1997 BMW 540i Cooling and Climate Controls Categories
1997 BMW 540i Cooling and Climate Controls
You count on your 1997 BMW 540i to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 97 Cooling and Climate Controls ranging in price from $1.27 to $429.44, you’re sure to find everything you need for your 1997 BMW 540i.
Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 29 different brands like Permatex, Imperial, and Dorman. 1997 BMW 540i Cooling and Climate Controls start as low as $1.27!
One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 425 extensive product reviews on 1997 BMW 540i Cooling and Climate Controls. Some of the top-rated Cooling and Climate Controls products we carry are Radiator Cap: 30 PSI with 4.1 stars and Electric Fan – 14" Diameter with 3.5 stars.
Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 1997 BMW 540i below to get started!
Top-Rated Cooling and Climate Controls Brands For Your 1997 BMW 540i
Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1997 BMW 540i running right for years to come. In our inventory you’ll find brands like Permatex, Imperial, Dorman, and even more.
Popular Permatex Cooling and Climate Controls
You’ll find popular Permatex brand products across Engine Cooling Parts. All are waiting to get your 1997 BMW 540i back on the road. Some of the top-rated Permatex products in these categories are:
Top-Rated Cooling and Climate Controls
If are what you’re looking for, our inventory holds plenty. We stock brand Cooling and Climate Controls for your 1997 BMW 540i, and some of our most reviewed parts include:
FAQs for 1997 BMW 540i Cooling and Climate Controls
What are the most purchased Cooling and Climate Controls for the 1997 BMW 540i?
Out of 97 Cooling and Climate Controls for the 1997 BMW 540i, the most popular in our inventory are:
What are the top-rated 1997 BMW 540i Cooling and Climate Controls?
Top-rated Cooling and Climate Controls for your 1997 BMW 540i based on customer reviews/ratings are:
