1997 BMW 528i Oil and Lubricants
More 1997 BMW 528i Oil and Lubricants Categories
If you’re looking for an original Oil and Lubricants replacement for a 1997 BMW 528i, you can search through our selection below. You’ll also find aftermarket and OEM Oil and Lubricants to meet your needs.
Essential 1997 BMW 528i Oil and Lubricants
FRAM – High Milage Conventional 10W30 Engine Oil – Helps Restore Seal Condition – 1 Qt (Part No.F665)
from
$6.49
FRAM Conventional High Mileage 10W30 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 10W30 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF, and 10W30 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.
Product Features:
See More
Product Features:
- Formulated with a unique combination of premium base oils and an enhanced additive system
- Provides increased protection in higher mileage engines
- Helps restore seal condition to reduce oil consumption
- Increases protection against high temperature deposits and ring sticking
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
- Specially formulated for high mileage engines: FRAM High Mileage 10W30 Engine Oil is designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines, making it the perfect choice for vehicles with over 75,000 miles.
Castrol – GTX High Mileage Synthetic Blend 10W-30 Motor Oil: Helps Protect Emission Systems, 1 Quart (Part No.149D6C)
from
$10.49
Castrol® GTX® High Mileage motor oil is the leading consumer high-mileage brand. It’s a synthetic blend motor oil that helps extend the life of your engine by protecting against sludge, wear and burn-off. Castrol GTX High Mileage is also engineered to protect your emission system. One of the leading causes of ‘check engine’ lights coming on in high mileage cars is catalytic converter failure, which can be caused by phosphorous in engine oil. While phosphorous is present in all engine oils for its ability to reduce wear, it is effectively poisonous to catalytic converters. Castrol GTX High Mileage is formulated with Phosphorous Replacement Technology to replace some of the phosphorous with an advanced additive that maintains robust wear protection. When you want to extend the life of your high mileage engine and emission system, there is no better choice than Castrol GTX High Mileage.
Product Features:
See More
Product Features:
- Phosphorus Replacement Technology to help extend the life of the emission system
- Superior dispersancy that fights sludge build up
- Exceptional oil burn-off protection exceeding industry standards (based on API and ACEA volatility specifications)
- Seal conditioners to help reduce leaks
- Advanced additives that minimize engine wear
- Improved fuel economy (in 5W-20, 5W-30 and 10W-30 grades versus industry specifications)
- Meets or exceeds API SP/SN PLUS/SN and ILSAC GF-6 specs
- Engine Longevity: Castrol GTX High Mileage motor oil is specifically designed to extend the life of high mileage engines by protecting against sludge, wear, and burn-off.
- Emission System Protection: Engineered to safeguard your emission system, this motor oil helps prevent catalytic converter failure, a common cause of ‘check engine’ lights in high mileage vehicles.
- Synthetic Blend Composition: This 10W-30 synthetic blend motor oil offers superior performance and protection compared to conventional oils, making it ideal for high mileage engines.
- Trusted Brand: As a leading consumer high-mileage brand, Castrol GTX High Mileage provides reliable and effective engine protection, ensuring your vehicle runs smoothly for longer.
Castrol – 1 Qt Full Synthetic 5W-20 Engine Oil – 3X Stronger Against Viscosity Breakdown (Part No.15B743)
from
$9.99
Castrol Ultraclean synthetic blend engine oil is our cleanest GTX ever. Environmental factors such as poor fuel quality, hot weather and stop-start driving conditions can lead to the buildup of sludge that can reduce engine life, power and fuel economy. Castrol Ultraclean has a double-action formula proven to clean away the sludge that can block engine oilways and helps prevent new sludge formation from occurring. In fact, it provides up to 1.4X better sludge protection than is demanded by the latest industry standard (as measured in the Sequence VH Sludge test vs. API SP test limits). No other oil keeps engines cleaner.
Product Features:
See More
Product Features:
- Premium-quality base oils and anti-wear additives that help extend the life of your engine
- 1.4x superior sludge protection compared to tough industry standards, as measured in the sequence vh sludge test vs. api sp test limits
- Advanced protection against viscosity and thermal breakdown
- Superior protection against high-temperature deposits
- Meets or exceeds api sp/sn plus/sn, ilsac gf-6 and latest ford specs
- Unsurpassed thermal breakdown protection: GTX Engine Oil, 5W-20 provides superior protection against thermal breakdown, ensuring that your engine stays protected even under extreme temperatures.
Castrol – EDGE 5W-20 Full Synthetic Engine Oil 1 Quart (Part No.152C82)
from
$11.99
CASTROL EDGE 5W-20 Full Synthetic Motor Oil 1 Quart is the perfect choice for drivers who want the best engine performance. This oil is Castrol’s strongest oil, formulated with Fluid TITANIUM Technology, which provides maximum sludge protection, wear protection, and engine performance. It is 3X stronger against viscosity breakdown than traditional oils, 10X better in high-temperature performance, and 6X better in wear protection. This oil meets API SP/SN PLUS, ILSAC GF-6, ACEA A1/B1, and other industry standards. It is a full synthetic oil with an SAE weight of 5W-20, which means it is suitable for use in most modern engines. With Castrol EDGE, you can unlock maximum performance with every drive.
Product Features:
See More
Product Features:
- 3x stronger against viscosity breakdown than the leading full synthetic – based on kurt orbahn test in 5W-30 grade
- 10x better high temperature performance – as measured in seq iiih engine test vs. api sp limit
- 6x better wear protection – as measured in seq iva test vs. latest test limit
- Meets api sp/sn plus, ilsac gf-6, acea a1/b1, acea c5, gm dexos1 gen 2, meets ford wss-m2c960-a1 and wss-m2c945-b1, meets engine test requirements of chrysler ms 6395
- Syntec Power Technology: The reformulated EDGE Engine Oil with Syntec Power Technology provides even better performance, making it the perfect choice for drivers who demand the best from their engines.
- Full Synthetic Oil Composition: The oil composition of EDGE Engine Oil is full synthetic, providing superior protection against sludge buildup and wear, ensuring maximum engine performance.
FRAM – 5 Qt Conventional 5W30 Engine Oil with Low-Speed Pre-Ignition Control (Part No.F620-5QT)
from
$25.99
FRAM Engine Oil SAE 5W-30 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.
Product Features:
See More
Product Features:
- Low-speed pre-ignition control
- Chain wear protection
- Piston cleanliness
- Turbo-compatibility
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
- Reliable engine protection: FRAM Conventional Oil 5W30 5 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.
Castrol – EDGE High Mileage 5W-20 Advanced Full Synthetic Engine Oil: 5 Quart (Part No.15906D)
from
$38.99
Castrol EDGE High Mileage with Fluid TITANIUM Technology is the natural choice for drivers who demand maximum performance from their high mileage cars, which often operate at extreme temperatures. Castrol EDGE High Mileage provides up to 10X better high temperature performance than the latest industry standard to ensure optimal protection and oil flow over the drive cycle. As your car ages, it can lose performance and efficiency and is also more prone to catalytic converter failure. Castrol EDGE High Mileage is liquid engineered with Phosphorous Replacement Technology to reduce harmful phosphorus to protect the catalytic converter and preserve the life of your emission system. Castrol EDGE High Mileage helps your car defy its miles and extend maximum performance.
Product Features:
See More
Product Features:
- Patented phosphorus replacement technology to help extend the life of your emission system
- 10x better high temperature performance (as measured in sequence iiih engine test vs. api sp test limit)
- 6x better wear protection (as measured in latest sequence iva engine test)
- 1.4x better sludge protection (as measured in sequence vh engine test vs. api sp test limit)
- Maximum Performance: Castrol EDGE High Mileage Engine Oil is designed to provide maximum performance for high mileage cars that often operate at extreme temperatures.
- Improved High Temperature Performance: With Fluid TITANIUM Technology, this engine oil provides up to 10X better high temperature performance than the latest industry standard, ensuring optimal protection and oil flow over the drive cycle.
Castrol – EDGE High Mileage 10W-30 Advanced Full Synthetic Engine Oil: 5 Qt (Part No.15906F)
from
$38.99
Castrol EDGE High Mileage with Fluid TITANIUM Technology is the natural choice for drivers who demand maximum performance from their high mileage cars, which often operate at extreme temperatures. Castrol EDGE High Mileage provides up to 10X better high temperature performance than the latest industry standard to ensure optimal protection and oil flow over the drive cycle. As your car ages, it can lose performance and efficiency and is also more prone to catalytic converter failure. Castrol EDGE High Mileage is liquid engineered with Phosphorous Replacement Technology to reduce harmful phosphorus to protect the catalytic converter and preserve the life of your emission system. Castrol EDGE High Mileage helps your car defy its miles and extend maximum performance.
Product Features:
See More
Product Features:
- Patented phosphorus replacement technology to help extend the life of your emission system
- 10x better high temperature performance (as measured in sequence iiih engine test vs. api sp test limit)
- 6x better wear protection (as measured in latest sequence iva engine test)
- 1.4x better sludge protection (as measured in sequence vh engine test vs. api sp test limit)
- Maximum Performance: Castrol EDGE High Mileage Engine Oil is designed to provide maximum performance for high mileage cars that often operate at extreme temperatures.
- Improved High Temperature Performance: With up to 10X better high temperature performance than the latest industry standard, Castrol EDGE High Mileage Engine Oil ensures optimal protection and oil flow over the drive cycle.
FRAM – 5W-20 Full Synthetic Motor Oil, Faster Oil Flow, 5 Quart (Part No.F920-5QT)
from
$27.99
FRAM Engine Oil Full Synthetic SAE 5W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos®1 Gen 2 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 5W-20 and is a fully licensed GM dexos®1 Gen 2 motor oil.
Product Features:
See More
Product Features:
- Faster oil flow at start-up
- Fuel efficiency gains over heavier grade oils
- Excellent sludge and varnish protection
- Outstanding thermal and oxidation stability
- Lowers oil vaporization and consumption at extreme conditions
- ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
- Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 5W-20 meets stringent API: SP, SN, SM, SL, SJ, GM dexos«1 Gen 2, and ILSAC GF-6A specifications, ensuring top-tier protection for your engine.
- Advanced Additive Technology: Specifically formulated to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs, reducing the risk of pre-mature engine failure.
- Enhanced Wear Protection: Provides increased wear protection, oxidation, and shear stability over previous oil categories, extending the life of your engine.
- Versatile Compatibility: Suitable for a variety of engine types, including GDI, TGDI, carbureted, and normally fuel-injected engines, making it a versatile choice for many vehicles.
Valvoline – European Vehicle Full Synthetic 5W-40 Engine Oil: For Gasoline & Diesel Engines, 5 Quart (Part No.881166)
from
$35.99
European engines need a premium motor oil designed to help them last. Valvoline European Vehicle Full Synthetic Motor Oil. It’s the motor oil specially developed to extend the life of European-made gasoline and diesel engines. Our exclusive formula uses top wear additives, premium antioxidants and added detergents to fight wear, resist oil breakdown and defend against deposits better than industry standards. Its exceptional range of temperature protection ensures your engine will be defended when the weather and road conditions get tough. This superior level of protection makes it the best choice for most Audi, BMW, Mercedes-Benz, Porsche, and VW vehicles. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.
Product Features:
See More
Product Features:
- Advanced protection in european vehicles agains the four main causes of engine breakdown: wear friction heat and deposits
- Extra wear protection vs. industry and oem standards with advanced anti-wear additives
- Superior performance for european gasoline and diesel engines
- Exceptional high/low temperature protection defends your engine no matter the climate or driving conditions
- Meets or exceeds all requirements of api sp, acea a3/b3, a3/b4, mb 229.5, 229.3, &226.5, vw 50200/50500 & 50501, bmw ll-01 & ll-14fe+, porche a40, volvo 95200356, renault rn0700 & rn0710, psa b71 2296, and chrysler ms-12633/ ms-10725
- Premium Protection: Valvoline European Vehicle Full Synthetic Engine Oil is specially designed to extend the life of European-made gasoline and diesel engines, providing premium protection against wear, oil breakdown, and deposits better than industry sta
Permatex – Ceramic Extreme Brake Parts Lubricant (Part No.3C210445993PMX)
from
$22.93
5 fl. oz. Tube – A 100% synthetic formula, coupled with real ceramic solids make this premium brake lubricant our longest lasting, most temperature resistant way to silence brake noise. Effective from -50F to 3000F (-46C to 1649C), this product maintains its lubricating integrity under the most extreme conditions. Resistant to corrosion and contaminants, it will not wash out. Suggested Applications: Disc brake caliper hardware, bushings, pistons, rubber sleeves and seals. DIRECTIONS:
Product Features:
See More
Product Features:
- Clean parts to be lubricated with Permatex® Brake and Parts Cleaner
- Apply small amount to caliper hardware, backing plates, bushings and seals to create uniform surface areas and prevent noise. Safe on rubber seals and plastic.
- Lubricant may also be used as a noise suppressor to eliminate caliper brake squeal by applying to the BACK of the brake pad.
- DO NOT APPLY TO ANY BRAKING SURFACES. TECHNICAL DATA SHEET
Pennzoil – 5W-40 Full Synthetic Motor Oil, Helps Extend Engine Life, 1 Quart (Part No.550057822)
from
$40.99
Pennzoil Platinum® Euro is designed for complete protection and performance for European vehicles. Pennzoil Platinum Euro helps extend engine life and protects for up to 15 years or 500,000 miles, whichever comes first. Guaranteed.1 Pennzoil Platinum Euro is made from natural gas, not crude. Its base oil is 99.5% free from engine clogging impurities. The Proof is in the Pennzoil. 1 Based on Sequence IIIH results . Does not apply to Pennzoil Platinum® Euro motor oil.
Product Features:
See More
Product Features:
- No other leading motor oil provides better protection from friction1? 1 Based on Sequence IVA wear test using SAE 0W-40.
- Better Fuel Economy2 2 Meets the requirements of MB 229.5 which includes Fuel Economy Improvement (FEI) requirement as determined in industry standard gasoline engines
- Protects Horsepower
- Nothing keeps your engine close to factory clean3 3 Based on Sequence vh and M-111 sludge test using SAE 0W-40.
- Complete Protection and Performance: Pennzoil Platinum« Euro is specifically designed to provide comprehensive protection and optimal performance for European vehicles.
- Complete Protection and Performance: Pennzoil Platinum® Euro is specifically designed to provide comprehensive protection and optimal performance for European vehicles.
- Extended Engine Life: This full synthetic 5W-40 engine oil helps extend engine life, offering protection for up to 15 years or 500,000 miles, whichever comes first.
- High Purity Base Oil: Made from natural gas, not crude, Pennzoil Platinum« Euro’s base oil is 99.5% free from engine-clogging impurities, ensuring cleaner engine performance.
- High Purity Base Oil: Made from natural gas, not crude, Pennzoil Platinum® Euro’s base oil is 99.5% free from engine-clogging impurities, ensuring cleaner engine performance.
- Full Synthetic Composition: As a full synthetic oil, it offers superior performance and protection compared to conventional oils, making it ideal for high-performance European engines.
- Pennzoil Platinum« Euro meets the rigorous demands of European vehicle manufacturers, ensuring reliability and efficiency.
- Pennzoil Platinum® Euro meets the rigorous demands of European vehicle manufacturers, ensuring reliability and efficiency.
Idemitsu – Type TLS Automatic Transmission Fluid – 1 qt (Part No.10106-042K)
from
$11.79
Formulated to meet the specific requirements of Toyota, Lexus, and scion vehicles equipped with conventional (non-CVT) transmissions that require the use of ATF T-IV. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions where ATF T-IV is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.
Product Features:
See More
Product Features:
- Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
- Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
- Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
- Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
- Advanced anti-wear technology provides maximum protection to gears and bearings
- Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
Popular 1997 BMW 528i Oil and Lubricants Categories
1997 BMW 528i Oil and Lubricants
You count on your 1997 BMW 528i to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Oil and Lubricants. With 67 Oil and Lubricants ranging in price from $6.49 to $79.99, you’re sure to find everything you need for your 1997 BMW 528i.
Brands matter. If you want to shop a specific Oil and Lubricants brand, we stock 9 different brands like Castrol, Fram, and Royal Purple. 1997 BMW 528i Oil and Lubricants start as low as $6.49!
One of the best ways to find top quality OEM or aftermarket Oil and Lubricants is by asking professionals. Short of that, you can shop with confidence thanks to our 5,334 extensive product reviews on 1997 BMW 528i Oil and Lubricants. Some of the top-rated Oil and Lubricants products we carry are EDGE 5W-30 Advanced Full Synthetic Motor Oil: 1 Quart with 4.9 stars and GTX Ultraclean 5W-30 Synthetic Blend Motor Oil: 5 Quart with 4.8 stars.
Did we mention you can order your Oil and Lubricants from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Oil and Lubricants inventory for your 1997 BMW 528i below to get started!
Top-Rated Oil and Lubricants Brands For Your 1997 BMW 528i
Trusted Oil and Lubricants OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1997 BMW 528i running right for years to come. In our inventory you’ll find brands like Castrol, Fram, Royal Purple, and even more.
Popular Royal Purple Oil and Lubricants
You’ll find popular Royal Purple brand products across Motor Oil. All are waiting to get your 1997 BMW 528i back on the road. Some of the top-rated Royal Purple products in these categories are:
Top-Rated Castrol Oil and Lubricants
If Castrol are what you’re looking for, our inventory holds plenty. We stock Castrol brand Oil and Lubricants for your 1997 BMW 528i, and some of our most reviewed Castrol parts include:
from
$10.49
(670)
GTX High Mileage Synthetic Blend 5W-30 Engine Oil: Helps Protect Emission Systems, 1 Quart
Engine Oil
FAQs for 1997 BMW 528i Oil and Lubricants
What are the most purchased Oil and Lubricants for the 1997 BMW 528i?
Out of 67 Oil and Lubricants for the 1997 BMW 528i, the most popular in our inventory are:
from
$27.99
This product is not rated
Full Synthetic 5W-30 Dexos1 Gen 3 Engine Oil: 5 Quart
Engine Oil
What are the top-rated 1997 BMW 528i Oil and Lubricants?
Top-rated Oil and Lubricants for your 1997 BMW 528i based on customer reviews/ratings are:
from
$9.99
(333)
GTX Ultraclean 5W-30 Synthetic Blend Motor Oil: No Oil Keeps Engines Cleaner, 1 Quart
“good”
