1997 BMW 318i Shocks and Struts
More 1997 BMW 318i Shocks and Struts
Find your specific 1997 BMW 318i original or aftermarket Shocks and Struts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1997 BMW 318i Shocks and Struts
Bilstein – B4 OE Replacement – Strut Assembly (Part No.L3000457510BIL)
from
$185.23
Finish: Black Paint Bilstein B4 OE Replacement gas pressure shock absorbers and struts are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle, while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.
Product Features:
See More
Product Features:
- Constant damping characteristics under any load
- Consistent performance and handling give the vehicle a new car feel every time
- Proven BILSTEIN gas pressure technology
- High OEM quality standards
Bilstein – B4 OE Replacement – Strut Assembly (Part No.L3000457509BIL)
from
$186.86
Finish: Black Paint Bilstein B4 OE Replacement gas pressure shock absorbers and struts are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle, while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.
Product Features:
See More
Product Features:
- Constant damping characteristics under any load
- Consistent performance and handling give the vehicle a new car feel every time
- Proven BILSTEIN gas pressure technology
- High OEM quality standards
Rein – Strut Mount (Part No.AVQ0371R)
from
$69.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts
Product Features:
See More
Product Features:
- Manufactured to strict engineering standards/specifications in materials and tolerances
- Rubber components match the shore hardness of the original equipment mount to ensure maximum performance and product longevity
- High corrosion resistance
- All bearings included are produced by an Original Equipment manufacturer ensuring the highest quality and performance
Monroe – Strut-Mate Strut Mounting Kit (Part No.902905)
from
$113.99
Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.
Product Features:
See More
Product Features:
- PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
- REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
- REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
- RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
- EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
MTC – MTC Shock Mount Plate (Part No.L4015323661MTC)
from
$2.75
The MTC shock mount plate is OE Quality and is manufactured using only the highest quality materials.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- OE style mount
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
Lemfoerder – Shock Mount (Part No.L401051096LEM)
from
$21.33
The Lemfoerder shock mount is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- OE style mounts and fasteners
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
Corteco – Corteco Shock Mount (Part No.L401019622CFW)
from
$20.95
The Corteco Shock mount is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
APA/URO Parts – Strut Bump Stop (Part No.L303677948APA)
from
$11.79
APA/URO superior quality Bump Stop prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life.
Product Features:
See More
Product Features:
- Made from premium quality cellular polyurethane
- Perfectly compliment OE style struts
- Are built with design and quality that matches or exceeds OE quality
KYB – Gas Shock (Part No.343352)
from
$74.99
Ride Comfort may be important, but restoring a vehicles Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicles original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.
Product Features:
See More
Product Features:
- KYB Recommended Orem Replacement Strut
- The KYB Excel-G Helps Restore The Designed Control And Handling Of Your Bow 3 Series
- The KYB Excel-G Uses A Triple Lip Fluid Seal To Reduce The Chance Of Oil And Gas Leaking Out
- Vehicle Specific, Hand Assembled, In-House Damping Valves Correctly Manage Tire Contact, Steering Response And Body Movement
- Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Excel-G Helps Keep Electronic Safety Systems Performing As Designed.
- KYB Has The Strongest And Thickest Strut Bodies And Brackets In The Industry; Minimizing Flex To Maintain Correct Alignment In All Conditions
- To Reduce The Chance Of Noise And Vibration KYB Recommends Installing New Strut Mounts, Part Number: Sm5257
- Protect Your New Struts From Dirt, Debris And Salt With A KYB Strut Boot, Part Number: Sb107
Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5974)
from
$77.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
- CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Bilstein – B6 Performance – Shock Absorber (Part No.L4000396327BIL)
from
$163.67
Bilstein B6 Performance gas pressure shock absorbers and struts are the ideal choice for most vehicles, including full-size sedans, SUVs and trucks. These shock absorbers and struts provide improved handling and stability, without sacrificing ride comfort. Bilstein B6 Performance shock absorbers offer superior damping ability that makes them ideal for the driver who demands superior performance, while maintaining an exceptional street ride.
Product Features:
See More
Product Features:
- Monotube gas pressure construction
- Improved safety and sportiness
- Added traction and enhanced stability
- Increased durability and performance while maintaining ride comfort
- Road-tested and fine-tuned by BILSTEIN for each vehicle specific application The performance of the Bilstein shocks does not decline from age, use or heat, requiring no compensating manual adjustments as with conventional multi-tube shocks.
Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5947)
from
$48.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
- CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Whiteline – Brace Strut Tower (Part No.KSB536)
from
$180.99
You can never have too much chassis stiffness. Weight aside, the more the better. Chassis bracing maintains alignment angles and spring rates by greatly reducing body or chassis flex. In fact, it helps every component in the suspension system do its job properly and you can feel the difference through improved turn-in, sharper steering response along with greater steering feedback.
Product Features:
See More
Product Features:
- Bracing maintains alignment angles and spring rates by greatly reducing body or chassis flex.
- Hand picked Whiteline bushings and/or alignment, geometry products best suiting your vehicle.
KYB – Jounce Bumper and Bellows (Part No.SB105)
from
$32.49
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
Product Features:
See More
Product Features:
- Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
- Poly Foam Bumper Prevents The Strut From Bottoming Out
- Built With Design And Quality That Matches Or Exceeds One
- Protects The Upper Seal And Bushing
Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1997)
from
$13.99
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.
Product Features:
See More
Product Features:
- Protects the shock’s piston rod from damage
- Universal design for easy installation
- Tie-strap included for a secure fit
- Constructed from high quality urethane for maximum durability
- Multiple color choices available
MOOG – Strut Bellows (Part No.K90464)
from
$31.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Construction and design validated by MOOG engineers
- Engineered to meet or exceed OE requirements
- Incorporates proven design and engineering features
Elring – Shock / Strut Paper Mount Gasket (Part No.L4017263905ELR)
from
$2.06
The Elring Shock / Strut Paper Mount Gasket is OE Quality and is manufactured using only the highest quality materials.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Meets or exceeds OEM specifications
Febi – Strut Bellows / Dust Boot (Part No.L3037127539FEB)
from
$7.19
The Febi Bellows / Dust Boot protects the piston rod from damage caused by debris (i.e. rocks, dust, dirt and stones), thus preventing premature strut failure.
Product Features:
See More
Product Features:
- Made from premium quality cellular polyurethane
- Manufactured with design and quality that matches or exceeds OE quality
- Resistant to oil and other contaminants
KYB – Jounce Bumper and Bellows (Part No.SB114)
from
$31.49
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
Product Features:
See More
Product Features:
- Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
- Poly Foam Bumper Prevents The Strut From Bottoming Out
- Built With Design And Quality That Matches Or Exceeds One
- Protects The Upper Seal And Bushing
Driveworks – Strut Bellow (Part No.DW-K90466)
from
$33.99
Driveworks Shock Mount, Suspension Strut Bellows
Product Features:
See More
Product Features:
- Designed to meet or exceeds OE performance specifications
- Durable neoprene rubber
Monroe – Strut-Mate Strut Boot Kit (Part No.63638)
from
$28.99
Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.
Product Features:
See More
Product Features:
- REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
- PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
- KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
- ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
- PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
- EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
- BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts
KYB – Jounce Bumper and Bellows (Part No.SB112)
from
$24.29
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
Product Features:
See More
Product Features:
- Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
- Poly Foam Bumper Prevents The Strut From Bottoming Out
- Built With Design And Quality That Matches Or Exceeds One
- Protects The Upper Seal And Bushing
- Designed And Built Specifically For Bows
Monroe – SHOCK-MATE Shock Absorber Boot Kit (Part No.L40301162991MNR)
from
$14.86
Monroe Shock-Mate Shock Absorber Boot Kits are universal replacement shock boots used to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.
Product Features:
See More
Product Features:
- Protects the shock’s piston rod from damage
- Universal design for easy installation
- Tie-strap included for a secure fit
Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1998)
from
$13.29
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.
Product Features:
See More
Product Features:
- Protects the shock’s piston rod from damage
- Universal design for easy installation
- Tie-strap included for a secure fit
- Constructed from high quality urethane for maximum durability
- Multiple color choices available
MOOG – Strut Bellows (Part No.K90460)
from
$34.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Construction and design validated by MOOG engineers
- Engineered to meet or exceed OE requirements
- Incorporates proven design and engineering features
Popular 1997 BMW 318i Shocks and Struts Categories
1997 BMW 318i Shocks and Struts
Maybe you’re in the middle of a full rebuild of that 1997 BMW 318i. Maybe you just need a couple of Shocks and Struts. Either way, Advance Auto Parts has 27 different Shocks and Struts in our inventory ranging from $2.06 to $191.34. That means you can find the exact parts or products you need to keep that 1997 BMW 318i running smoothly.
Shocks and Struts are only as good as their brand. We stock 12 different brands to make sure you have plenty of trusted parts to choose from for your 1997 BMW 318i. Moog, KYB, and Monroe are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Shocks and Struts for your 1997 BMW 318i, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 209 reviews in this category, some of the top rated parts include Shock-Mate Shock Absorber Boot Kit with 4.6 stars and Shock-Mate Shock Absorber Boot Kit with 4.6 stars.
So if you’re in the market for aftermarket Shocks and Struts to keep your 1997 BMW 318i rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Shocks and Struts Brands To Make Your 1997 BMW 318i Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1997 BMW 318i demands trusted brand parts and products to keep it running. Many trusted brands of Shocks and Struts make up Advance Auto Parts’ inventory, and all are ready to help make your 318i the best it can be. Be sure to browse some of our top Shocks and Struts brands and parts.
Popular Bilstein Shocks and Struts
We carry Bilstein parts in our stock across Front Shock and Struts categories, plus more. For a 1997 BMW 318i, our most popular Bilstein Shocks and Struts include:
FAQs for 1997 BMW 318i Shocks and Struts
What are the most purchased Shocks and Struts for the 1997 BMW 318i?
Out of 27 Shocks and Struts for the 1997 BMW 318i, the most popular in our inventory are:
What are the top-rated 1997 BMW 318i Shocks and Struts?
Top-rated Shocks and Struts for your 1997 BMW 318i based on customer reviews/ratings are:
from
$13.99
(35)
Shock-Mate Shock Absorber Boot Kit
“Used this to replace the torn shock boot on my Goldwing 1500 motorcycle. it fit well, used a tie warp and it was good to go”
from
$77.99
(2)
OESpectrum Passenger Car Shock Absorber
“I install this item to my 1992 B M W and find it very easy to install and so far it good, no problem”
