1996 Volvo 960 Brake Parts
More 1996 Volvo 960 Brake Parts Categories
If you’re looking for an original Brake Parts replacement for a 1996 Volvo 960, you can search through our selection below. You’ll also find aftermarket and OEM Brake Parts to meet your needs.
Essential 1996 Volvo 960 Brake Parts
Bosch – Booster Check Valve (Part No.N4030168919BOS)
from
$14.44
Bosch is one of the largest global suppliers of automotive products, developing, manufacturing and supplying precision OE components and systems to vehicle manufacturers and the automotive aftermarket. 14mm thread
See More
Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)
from
$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.
Product Features:
See More
Product Features:
- Each unit is 100% new, providing consistent performance when servicing your brake system
- Easy to transfer for on-the-spot master cylinder bleeding
- Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
- Easy to clean to ensure no cross contamination
- Durability for long lasting performance
Carquest Wearever – Brake Rotor: Meets or Exceeds OE Specs (Part No.YH141942)
from
$82.99
Carquest Premium rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Premium rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Premium rotors are designed for long-lasting and quiet braking with superior performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE design for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Matches OE vane size for proper cooling
- Optimal metallurgy and casting thickness to preventing warping
- Air gap eliminates brake fade and increases pad life
- Non-directional finish decreases break-in time.
Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N1000457471ZIC)
from
$83.64
Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.
Product Features:
See More
Product Features:
- Coat-Z protective anti-corrosion coating
- No formation of rust at the hub and herewith improved visual appearance
- Immediate functional capability without removal of the coating before mounting
- Excellent deceleration action and no distortion of friction ring at high temperatures
- Substantial weight saving and therefore less unsprung mass
- Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
- Hot spots prevented by optimized design of ventilation channels
- 1:1 exchange of original disc possible
- Not subject to registration: general ABE certification supplied with disc
- No conversion required for brake tuning
Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.14121)
from
$20.99
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Easy and fast replacement
- Ensures the brake pads are meeting the rotors at the correct angle for an even braking system
- Corrosion resistant coating for long-lasting durability against harsh roads
- Manufactured with quality materials to suppress high stress levels
- Helps deliver a quieter, more efficient braking system
Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.14009)
from
$4.99
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Easy and fast replacement
- Ensures the brake pads are meeting the rotors at the correct angle for an even braking system
- Corrosion resistant coating for long-lasting durability against harsh roads
- Manufactured with quality materials to suppress high stress levels
- Helps deliver a quieter, more efficient braking system
Carquest Wearever – Disc Brake Hardware Kit (Part No.13073)
from
$17.79
Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Exact fitment and original replacement
- New Brake Hardware prevents premature wear and maximizes performance
- Helps deliver a quieter, more efficient braking system
- Manufactured with quality materials to suppress high stress levels
Professional Parts Sweden – Parking Brake Hdwr K (Part No.N5005457604PPS)
from
$11.70
Parking Brake Hdwr K
Otto Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N1000402123ZIC)
from
$60.02
Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.
Product Features:
See More
Product Features:
- Coat-Z protective anti-corrosion coating
- No formation of rust at the hub and herewith improved visual appearance
- Immediate functional capability without removal of the coating before mounting
- Excellent deceleration action and no distortion of friction ring at high temperatures
- Substantial weight saving and therefore less unsprung mass
- Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
- Hot spots prevented by optimized design of ventilation channels
- 1:1 exchange of original disc possible
- Not subject to registration: general ABE certification supplied with disc
- No conversion required for brake tuning
Carquest Wearever – Brake Rotor: Meets or Exceeds OE Specs (Part No.YH141199)
from
$73.99
Carquest Premium rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Premium rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Premium rotors are designed for long-lasting and quiet braking with superior performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE design for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Matches OE vane size for proper cooling
- Optimal metallurgy and casting thickness to preventing warping
- Air gap eliminates brake fade and increases pad life
- Non-directional finish decreases break-in time.
Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-5995)
from
$109.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.
Product Features:
See More
Product Features:
- 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
- Exclusive rust-prohibitive finishing process extends unit life.
- Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
- All units are 100% tested to ensure reliable performance.
- Guaranteed fit and function.
Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-5996)
from
$96.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.
Product Features:
See More
Product Features:
- 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
- Exclusive rust-prohibitive finishing process extends unit life.
- Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
- All units are 100% tested to ensure reliable performance.
- Guaranteed fit and function.
Carquest Premium – Semi Loaded Disc Brake Caliper with Bracket (Part No.19-B1622)
from
$58.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.
Product Features:
See More
Product Features:
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
- 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
- New bleeder screws, banjo bolts, and crush washers included for a complete repair
- OE Style, stainless steel pad abutment hardware included
- 100% end-of-line inspection and pressure testing ensures quality and performance
- Caliper finish or coating may vary
Carquest Premium – Semi Loaded Disc Brake Caliper with Bracket (Part No.19-B1623)
from
$58.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.
Product Features:
See More
Product Features:
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
- 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
- New bleeder screws, banjo bolts, and crush washers included for a complete repair
- OE Style, stainless steel pad abutment hardware included
- 100% end-of-line inspection and pressure testing ensures quality and performance
- Caliper finish or coating may vary
Wagner – ThermoQuiet Disc Brake Pad Set (Part No.PD31)
from
$15.00
Wagner TQ® brake pads feature a zero-copper friction formulation and a unique Integrally Molded Insulator (IMI) technology for quieter operation.
Product Features:
See More
Product Features:
- QUIETER OPERATION — Application-specific design and a unique laser-shaped friction spreads out heat, sound and vibration to reduce noise opportunities
- COMPREHENSIVE COVERAGE — Brake pads available for most vehicles on the road
PowerStop – Z17 Low-Dust Ceramic Brake Pads with Hardware (Part No.17-542)
from
$52.99
The Power Stop Z17 Evolution Plus ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z17 pads maintain consistent wear and performance while ensuring a fast break-in. Stainless steel hardware is included with the Z17 brake pads making it easier to complete your brake job. The Power Stop Z17 Evolution Plus ceramic brake pads are an affordable stock replacement for all vehicles.
Product Features:
See More
Product Features:
- Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
- Positive mold technology for consistent wear and performance
- Thermal scorched pad surface for a fast break-in
- Chamfered and slotted to ensure noise free braking
- Powder coated backing plate resists rust and corrosion to provide extended pad life
- Multi-Layer rubberized shims provide virtually noise-free braking
- Includes Premium stainless-steel hardware for easy installation
Carquest Wearever – Disc Brake Caliper Guide Pin Boot Kit (Part No.18005A)
from
$15.79
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks. Changing out your Rubber Pin Boot or Slider Bushing Kit will ensure the guide pins are clean and free from debris for smoother braking.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Easy and fast replacement
- Maintains proper movement for safe, effective stopping performance
- Prevents noise and premature wear
Carquest Wearever – Disc Brake Hardware Kit (Part No.5603A)
from
$6.49
Hardware consists of a variety of parts designed to assist in restoring your brake system to Like New Performance. Caliper anti-rattle clips, seals, pins, and dust boots along with drum shoe return springs, hold down springs, and adjuster assemblies, help to maintain consistent, balanced braking. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Exact fitment and original replacement
- Prevents noise and premature wear
- Helps deliver a quieter, more efficient braking system
Akebono Euro – Ceramic Pads Ultra-Premium (Part No.EUR31)
from
$57.99
Product Features:
See More
- Made in the USA
- OE Manufacturer
- Ceramic Brake Pad
- Low Dust
- Powerful Quiet Stopping
- Ultra-Premium
- Extremely Rotor-Friendly for Longer Rotor Life
Akebono Euro – Ceramic Pads Ultra-Premium (Part No.EUR541)
from
$57.99
Product Features:
See More
- Made in the USA
- OE Manufacturer
- Ceramic Brake Pad
- Low Dust
- Powerful Quiet Stopping
- Ultra-Premium
- Extremely Rotor-Friendly for Longer Rotor Life
Akebono Euro – Ceramic Pads Ultra-Premium (Part No.EUR391)
from
$57.99
Product Features:
See More
- Made in the USA
- OE Manufacturer
- Ceramic Brake Pad
- Low Dust
- Powerful Quiet Stopping
- Ultra-Premium
- Extremely Rotor-Friendly for Longer Rotor Life
PowerStop – Z17 Low-Dust Ceramic Brake Pads with Hardware (Part No.17-391)
from
$41.99
The Power Stop Z17 Evolution Plus ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z17 pads maintain consistent wear and performance while ensuring a fast break-in. Hardware is included with the Z17 brake pads making it easier to complete your brake job. The Power Stop Z17 Evolution Plus ceramic brake pads are an affordable stock replacement for all vehicles.
Product Features:
See More
Product Features:
- Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
- Positive mold technology for consistent wear and performance
- Thermal scorched pad surface for a fast break-in
- Chamfered and slotted to ensure noise free braking
- Powder coated backing plate resists rust and corrosion to provide extended pad life
- Multi-Layer rubberized shims provide virtually noise-free braking
- Includes Premium hardware for easy installation
PowerStop – Z16 Low-Dust Ceramic Brake Pads (Part No.16-391)
from
$35.99
The Power Stop Z16 Evolution ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z16 pads maintain consistent wear and performance while ensuring a fast break-in. The Z16 Evolution ceramic brake pads are an affordable stock replacement for all vehicles.
Product Features:
See More
Product Features:
- Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
- Positive mold technology for consistent wear and performance
- Thermal scorched pad surface for a fast break-in
- Chamfered and slotted to ensure noise-free braking
- Powder coated backing plate resists rust and corrosion to provide extended pad life
- Multi-Layer rubberized shims provide virtually noise-free braking
Carquest Premium – Semi Loaded Disc Brake Caliper with Bracket (Part No.19-B2568)
from
$48.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.
Product Features:
See More
Product Features:
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
- 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
- New bleeder screws, banjo bolts, and crush washers included for a complete repair
- OE Style, stainless steel pad abutment hardware included
- 100% end-of-line inspection and pressure testing ensures quality and performance
- Caliper finish or coating may vary
Carquest Premium – Semi Loaded Disc Brake Caliper (Part No.19-1109)
from
$50.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.
Product Features:
See More
Product Features:
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
- 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
- New bleeder screws, banjo bolts, and crush washers included for a complete repair
- OE Style, stainless steel pad abutment hardware included
- 100% end-of-line inspection and pressure testing ensures quality and performance
- Caliper finish or coating may vary
Carquest Premium – Semi Loaded Disc Brake Caliper (Part No.19-1113)
from
$69.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.
Product Features:
See More
Product Features:
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
- 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
- New bleeder screws, banjo bolts, and crush washers included for a complete repair
- OE Style, stainless steel pad abutment hardware included
- 100% end-of-line inspection and pressure testing ensures quality and performance
- Caliper finish or coating may vary
Carquest Premium – Semi Loaded Disc Brake Caliper (Part No.19-1112)
from
$69.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.
Product Features:
See More
Product Features:
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
- 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
- New bleeder screws, banjo bolts, and crush washers included for a complete repair
- OE Style, stainless steel pad abutment hardware included
- 100% end-of-line inspection and pressure testing ensures quality and performance
- Caliper finish or coating may vary
Carquest Premium – Semi Loaded Disc Brake Caliper (Part No.19-1108)
from
$50.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.
Product Features:
See More
Product Features:
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- Meets or exceeds original equipment specifications for performance and durability
- OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
- Application-specific caliper bodies for easy installation
- Brackets included where required, for complete system restoration
- OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
- 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
- New bleeder screws, banjo bolts, and crush washers included for a complete repair
- OE Style, stainless steel pad abutment hardware included
- 100% end-of-line inspection and pressure testing ensures quality and performance
- Caliper finish or coating may vary
Popular 1996 Volvo 960 Brake Parts Categories
1996 Volvo 960 Brake Parts
You count on your 1996 Volvo 960 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Brake Parts. With 29 Brake Parts ranging in price from $4.29 to $274.13, you’re sure to find everything you need for your 1996 Volvo 960.
Brands matter. If you want to shop a specific Brake Parts brand, we stock 9 different brands like Carquest, Cardone, and Carquest Premium. 1996 Volvo 960 Brake Parts start as low as $4.29!
One of the best ways to find top quality OEM or aftermarket Brake Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 60 extensive product reviews on 1996 Volvo 960 Brake Parts. Some of the top-rated Brake Parts products we carry are Semi Loaded Disc Brake Caliper with Bracket with 5.0 stars and Semi Loaded Disc Brake Caliper with Bracket with 4.0 stars.
Did we mention you can order your Brake Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Brake Parts inventory for your 1996 Volvo 960 below to get started!
Top-Rated Brake Parts Brands For Your 1996 Volvo 960
Trusted Brake Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1996 Volvo 960 running right for years to come. In our inventory you’ll find brands like Carquest, Cardone, Carquest Premium, and even more.
Popular Carquest Standard Brake Parts
You’ll find popular Carquest Standard brand products across Brake Pads and Shoes and Brake Kits. All are waiting to get your 1996 Volvo 960 back on the road. Some of the top-rated Carquest Standard products in these categories are:
Top-Rated Carquest Wearever Brake Parts
If Carquest Wearever are what you’re looking for, our inventory holds plenty. We stock Carquest Wearever brand Brake Parts for your 1996 Volvo 960, and some of our most reviewed Carquest Wearever parts include:
FAQs for 1996 Volvo 960 Brake Parts
What are the most purchased Brake Parts for the 1996 Volvo 960?
Out of 29 Brake Parts for the 1996 Volvo 960, the most popular in our inventory are:
What are the top-rated 1996 Volvo 960 Brake Parts?
Top-rated Brake Parts for your 1996 Volvo 960 based on customer reviews/ratings are:
from
$58.99
(1)
Semi Loaded Disc Brake Caliper with Bracket
“This caliper comes with the brackets and slides with is quite nice when your car is a bit on the rusty side.”
from
$38.99
(1)
Semi-Metallic Brake Pads – (4-Pad Set)
“Bad bad issues with brake dust. The pads I replaced were not as bad even with the caliper slide pin frozen on the left front and it dragging they did ”
