1996 Volkswagen Golf Exhaust Parts

Essential 1996 Volkswagen Golf Exhaust Parts

MBRP Exhaust – Pro Series, 3 In Cat Back System: Polished Tip, 304 Stainless Steel, Designed for Power and Sound (Part No.S4603304)

Pro Series, 3 In Cat Back System: Polished Tip, 304 Stainless Steel, Designed for Power and Sound

from

$1009.99
Pro series is designed and built for the serious enthusiast who will settle for nothing less. Constructed from T304 stainless steel it delivers you optimal durability that keeps on looking its best. Easy to clean and maintain this is the product of choice for owners of lifted vehicles, show trucks or who operate in severe environments.

Product Features:
  • Built To Perform: Designed To Maximize Exhaust Flow And Minimize Exhaust Temperatures Your Truck Will Use Less Gas, Last Longer And Perform Better
  • Dyno Proven: From The Vehicle Specific Muffler Design To The Fully Mandrel Bent Tubing To Minimal Bend Degree Angles
  • Sound And Style: Every Performance Exhaust System Has Been Specifically Tuned To Get The Optimal Sound From Your Pickup
  • Easy Installation: Bolt On, No Weld Design Makes Installation A No Hassle One And A Half To Two Hour Project
  • Limited Lifetime Warranty
See More

Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.55261)

Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed

from

$499.99
Combining industry-leading coverage with a direct fit OE-style replacement, Walker® Quiet-Flow® muffler assemblies deliver a precision fit, superior flow and OE-style sound. Quiet-Flow muffler assemblies are available for domestic and foreign vehicles.

Product Features:
  • EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
  • RESISTS CORROSION — Internal drainage system helps reduce moisture collection
  • BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
  • DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
See More

BRExhaust – Exhaust Hanger (Part No.255-034)

Exhaust Hanger

from

$21.49
BRExhaust exhaust insulator mounts are high-quality replacements for original equipment hangers¿designed to fit right the first time. They’re manufactured from premium rubber and available for a variety of car, truck, and van applications. BRExhaust insulator mounts will help to keep your components in the right position, resulting in a longer lifespan for your exhaust system.

Product Features:
  • Exhaust accessory that enables a complete installation process
  • Precise fitment
  • Precise fitment
  • Manufactured according to strict OE standards
  • Reduced Vibration
See More

BRExhaust – Exhaust Hanger (Part No.255-084)

Exhaust Hanger

from

$13.99
BRExhaust exhaust insulator mounts are high-quality replacements for original equipment hangers¿designed to fit right the first time. They’re manufactured from premium rubber and available for a variety of car, truck, and van applications. BRExhaust insulator mounts will help to keep your components in the right position, resulting in a longer lifespan for your exhaust system.

Product Features:
  • Exhaust accessory that enables a complete installation process
  • Precise fitment
  • Precise fitment
  • Manufactured according to strict OE standards
  • Reduced Vibration
See More

Felpro – Exhaust Manifold Gasket Set (Part No.MS 96116)

Exhaust Manifold Gasket Set

from

$9.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
  • Contains all gaskets and seals to remove and replace exhaust manifold
  • Contains all gaskets and seals to remove and replace exhaust manifold
See More

Elring – Exhaust Manifold Gasket (Part No.A8111315812ELR)

Exhaust Manifold Gasket

from

$8.74
Exhaust Manifold Gasket

BRExhaust – Exhaust Hanger (Part No.255-047)

Exhaust Hanger

from

$8.29
BRExhaust exhaust insulator mounts are high-quality replacements for original equipment hangers¿designed to fit right the first time. They’re manufactured from premium rubber and available for a variety of car, truck, and van applications. BRExhaust exhaust insulator mounts will help keep your components in the right position, resulting in a longer lifespan for your exhaust system.

Product Features:
  • Designed to facilitate hassle-free exhaust repair
  • Precise fitment
  • Manufactured from quality materials to ensure maximum durability
  • OE-style design for quality fit
  • Secure sealing for superior durability
  • Manufactured from quality materials to ensure maximum durability
  • Reduced vibration
See More

Rein – Exhaust Hanger (Part No.EXH0027)

Exhaust Hanger

from

$23.99
Rein exhaust hangers are direct-fit OE replacements designed and manufactured to exact standards. Hangers come complete to ensure proper fit and function.

Product Features:
  • Produced with high quality materials to ensure maximum life and a smooth ride.
  • Manufactured to strict engineering standards/specifications in materials and tolerances.
  • Replace damaged or noisy exhaust hangers with Rein premium components to restore your vehicle to safe and optimal performance levels.
  • Replace worn-out exhaust hangers to prevent damage to costly catalytic converters and other exhaust components.
See More

Febi – EXHAUST NUT (Part No.H1001570904FEB)

EXHAUST NUT

from

$2.17
EXHAUST NUT

HJS – Exhaust Gasket (Part No.H4000125941HJS)

Exhaust Gasket

from

$9.72
Exhaust Gasket

Walker – Intermediate Pipe Aluminized 33.875" (Part No.53051)

Intermediate Pipe Aluminized 33.875"

from

$45.49
Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
  • EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
  • OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
See More

Rein – Exhaust Clamp (Part No.EXC0026)

Exhaust Clamp

from

$44.99
Rein exhaust clamps are direct-fit OE replacements designed and manufactured to exact standards. Clamps come complete with bolts and hardware to ensure proper fit and function.

Product Features:
  • Rein exhaust clamps are designed as direct-fit replacements to ensure trouble-free proper installation.
  • Rein exhaust clamps come complete with bolts and hardware when necessary for installation to save installation time and additional costs.
  • Replace leaking, damaged or noisy exhaust clamps with Rein premium components to restore your vehicle to safe and optimal performance levels.
  • Replace worn-out exhaust clamps to prevent damage to costly catalytic converters and other exhaust components.
See More

BRExhaust – Exhaust Bracket (Part No.255-054)

Exhaust Bracket

from

$13.79
BRExhaust insulator mounts are high-quality replacements for original equipment hangers¿designed to fit right the first time. They’re conveniently available for a variety of car, truck, and van applications. BRExhaust exhaust insulator mounts are manufactured from premium rubber and steel to help keep your components in the right position, resulting in a longer lifespan for your exhaust system.

Product Features:
  • Designed to facilitate hassle-free exhaust repair
  • Precise fitment
  • Manufactured from quality materials to ensure maximum durability
See More

Meyle – Exhaust Stud (Part No.H100525458MEY)

Exhaust Stud

from

$2.12
Exhaust Stud

CRP – Exhaust Manifold Stu (Part No.H100532468CRP)

Exhaust Manifold Stu

from

$1.76
Exhaust Manifold Stu

MagnaFlow – OEM Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.51205)

OEM Grade Federal / EPA Compliant Universal Catalytic Converter

from

$194.99
MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51205 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
  • Compact, lightweight construction enables installation in confined areas, welding is required.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – California Grade CARB Compliant Universal Catalytic Converter (Part No.408035)

California Grade CARB Compliant Universal Catalytic Converter

from

$289.99
MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 408035 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
  • Compact, lightweight construction enables installation in confined areas, welding is required.
  • Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

Victor Reinz – Exhaust Pipe Flange Gasket (Part No.71-15600-00)

Exhaust Pipe Flange Gasket

from

$38.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Felpro – Exhaust Pipe Flange Gasket (Part No.61705)

Exhaust Pipe Flange Gasket

from

$6.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

BRExhaust – Direct-Fit Premium Resonator Assembly (Part No.105-497)

Direct-Fit Premium Resonator Assembly

from

$198.99
BRExhaust direct-fit exhaust resonators are designed to install easily and help you retain the OE exhaust sound you are looking for. The resonator is engineered to optimally reduce unwanted noises and backpressure while protecting against corrosion. Aluminized steel construction ensures maximum durability.

Product Features:
  • Direct-fit configuration
  • Saves installation time by eliminating the need for the labor intensive bending and welding required with split system exhaust components
  • Optimal noise reduction
  • Low backpressure and corrosion protection
  • Constructed using 16-gauge aluminized steel
  • Aluminized steel construction for maximum durability
  • Constructed to help reduce flex and withstand vehicle vibration
See More

BRExhaust – Direct-Fit Premium Resonator Assembly (Part No.105-111)

Direct-Fit Premium Resonator Assembly

from

$165.99
BRExhaust direct-fit exhaust resonators are designed to install easily and help you retain the OE exhaust sound you are looking for. The resonator is engineered to optimally reduce unwanted noises and backpressure while protecting against corrosion. Aluminized steel construction ensures maximum durability.

Product Features:
  • Direct-fit configuration
  • Saves installation time by eliminating the need for the labor intensive bending and welding required with split system exhaust components
  • Optimal noise reduction
  • Low backpressure and corrosion protection
  • Constructed using 16-gauge aluminized steel
  • Aluminized steel construction for maximum durability
  • Constructed to help reduce flex and withstand vehicle vibration
See More

Walker – Direct Fit Catalytic Converter: No Fabrication Needed, EPA Compliance (Part No.52075)

Direct Fit Catalytic Converter: No Fabrication Needed, EPA Compliance

from

$161.99
Walker Resonators And Welded Resonator Assemblies provide precise tuning technologies to ensure excellent flow characteristics And OE-style sound. They feature 100% aluminized construction for longer life, quality appearance And favorable acoustics. These are OE-style resonators that fit, perform And sound like the original system.

Product Features:
  • EASY TO INSTALL – Meticulous pipe routing and OE-style hardware, flanges, and brackets for fast, easy installation
  • RESISTS CORROSION – Durable aluminized steel construction and helps reduce corrosion
  • FACTORY SOUND – OE-style louvered tubes (where applicable) help reduce radiated noise for factory-style sound quality
  • STRONG AND DURABLE – Features thick OE-style flanges, hardware and brackets for strength
  • GET MORE MILES FROM YOUR RESONATOR ASSEMBLY – Engineered to fit, perform and sound like the original system
See More

Walker – 3 Bolt Exhaust Pipe Flange Gasket: Graphite with Steel, Heat Resistant, Premium Materials (Part No.31611)

3 Bolt Exhaust Pipe Flange Gasket: Graphite with Steel, Heat Resistant, Premium Materials

from

$11.99
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
  • HEAT RESISTANT — Designed to resist heat for long-lasting performance
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
  • BETTER TOGETHER — Use premium Walker┬« accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

MAHLE Original – Catalytic Converter Gasket (Part No.F32609)

Catalytic Converter Gasket

from

$5.79
MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Flowtech – Terminator; Exhaust Tips (Part No.59905FLT)

Terminator; Exhaust Tips

from

$85.99


Product Features:
  • Show Quality Chrome Platinum
  • Durable Black Finish
  • Can Be Welded Or Clamped
  • Complete The System
  • Glass-Packed Resonators
See More

1996 Volkswagen Golf Exhaust Parts

You count on your 1996 Volkswagen Golf to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Exhaust Parts. With 54 Exhaust Parts ranging in price from $1.76 to $1,082.99, you’re sure to find everything you need for your 1996 Volkswagen Golf.

Brands matter. If you want to shop a specific Exhaust Parts brand, we stock 14 different brands like Walker, BRExhaust, and Flowtech. 1996 Volkswagen Golf Exhaust Parts start as low as $1.76!

One of the best ways to find top quality OEM or aftermarket Exhaust Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 364 extensive product reviews on 1996 Volkswagen Golf Exhaust Parts. Some of the top-rated Exhaust Parts products we carry are Intermediate Pipe Aluminized 33.875" with 5.0 stars and HM Grade Federal / EPA Compliant Universal Catalytic Converter with 3.0 stars.

Did we mention you can order your Exhaust Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Exhaust Parts inventory for your 1996 Volkswagen Golf below to get started!

Top-Rated Exhaust Parts Brands For Your 1996 Volkswagen Golf

Trusted Exhaust Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1996 Volkswagen Golf running right for years to come. In our inventory you’ll find brands like Walker, BRExhaust, Flowtech, and even more.

Popular Felpro Exhaust Parts

You’ll find popular Felpro brand products across Exhaust Pipes. All are waiting to get your 1996 Volkswagen Golf back on the road. Some of the top-rated Felpro products in these categories are:
Exhaust Pipe Flange Gasket
from $13.29
(3)
Exhaust Pipe Flange Gasket
Exhaust Pipe and Flange Gaskets
Exhaust Pipe Flange Gasket
from $10.29
(8)
Exhaust Pipe Flange Gasket
Exhaust Pipe and Flange Gaskets

Top-Rated Walker Exhaust Parts


If Walker are what you’re looking for, our inventory holds plenty. We stock Walker brand Exhaust Parts for your 1996 Volkswagen Golf, and some of our most reviewed Walker parts include:
Exhaust 35460 Exhaust System Hanger Insulator
from $6.79
(53)
Exhaust 35460 Exhaust System Hanger Insulator
Exhaust System Insulators

FAQs for 1996 Volkswagen Golf Exhaust Parts

What are the most purchased Exhaust Parts for the 1996 Volkswagen Golf?

Out of 54 Exhaust Parts for the 1996 Volkswagen Golf, the most popular in our inventory are:
Exhaust Hanger
from $8.29
This product is not rated
Exhaust Hanger
Exhaust Hangers and Hardware
Terminator; Exhaust Tips
from $85.99
(5)
Terminator; Exhaust Tips
Exhaust Chrome and Stainless Tips

What are the top-rated 1996 Volkswagen Golf Exhaust Parts?

Top-rated Exhaust Parts for your 1996 Volkswagen Golf based on customer reviews/ratings are:
Intermediate Pipe Aluminized 33.875"
from $45.49
(3)
Intermediate Pipe Aluminized 33.875"
“Fitment was good and price was very reasonable”
40 Series Muffler, 2in Center Inlet 2in Offset Outlet, Non-Reversible, Aggressive Sound
from $133.99
(1)
40 Series Muffler, 2in Center Inlet 2in Offset Outlet, Non-Reversible, Aggressive Sound
“I thought the 40 would be louder on a thunderbird”